Merge branch 'ue1_rev2' into usrp_e_next

1 files changed, 141 insertions, 0 deletions

diff --git a/fpga/usrp2/top/u1e/u1e.v b/fpga/usrp2/top/u1e/u1e.v
new file mode 100644
index 000000000..445b14a03
--- /dev/null
+++ b/fpga/usrp2/top/u1e/u1e.v
@@ -0,0 +1,141 @@
+`timescale 1ns / 1ps
+//////////////////////////////////////////////////////////////////////////////////
+
+module u1e
+  (input CLK_FPGA_P, input CLK_FPGA_N,  // Diff
+   output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
+   input debug_pb, output FPGA_TXD, input FPGA_RXD,
+
+   // GPMC
+   input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
+   input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6,
+   input EM_NWE, input EM_NOE,
+
+   inout db_sda, inout db_scl, // I2C
+
+   output db_sclk_tx, output db_sen_tx, output db_mosi_tx, input db_miso_tx,   // DB TX SPI
+   output db_sclk_rx, output db_sen_rx, output db_mosi_rx, input db_miso_rx,   // DB TX SPI
+   output sclk_codec, output sen_codec, output mosi_codec, input miso_codec,   // AD9862 main SPI
+   output cgen_sclk, output cgen_sen_b, output cgen_mosi, input cgen_miso,     // Clock gen SPI
+
+   input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
+   
+   output overo_gpio144, output overo_gpio145, output overo_gpio146, output overo_gpio147,  // Fifo controls
+   input overo_gpio0, input overo_gpio14, input overo_gpio21, input overo_gpio22,  // Misc GPIO
+   input overo_gpio23, input overo_gpio64, input overo_gpio65, input overo_gpio127, // Misc GPIO
+   input overo_gpio128, input overo_gpio163, input overo_gpio170, input overo_gpio176, // Misc GPIO
+   
+   inout [15:0] io_tx, inout [15:0] io_rx,
+
+   output [13:0] TX, output TXSYNC, output TXBLANK,
+   input [11:0] DA, input [11:0] DB, input RXSYNC,
+  
+   input PPS_IN
+   );
+
+   // /////////////////////////////////////////////////////////////////////////
+   // Clocking
+   wire  clk_fpga, clk_fpga_in;
+   
+   IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) 
+   clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
+
+   wire  clk_2x, dcm_rst, dcm_locked, clk_fb;
+   DCM #(.CLK_FEEDBACK ( "1X" ),
+	 .CLKDV_DIVIDE ( 2 ),
+	 .CLKFX_DIVIDE ( 2 ),
+	 .CLKFX_MULTIPLY ( 2 ),
+	 .CLKIN_DIVIDE_BY_2 ( "FALSE" ),
+	 .CLKIN_PERIOD ( 15.625 ),
+	 .CLKOUT_PHASE_SHIFT ( "NONE" ),
+	 .DESKEW_ADJUST ( "SYSTEM_SYNCHRONOUS" ),
+	 .DFS_FREQUENCY_MODE ( "LOW" ),
+	 .DLL_FREQUENCY_MODE ( "LOW" ),
+	 .DUTY_CYCLE_CORRECTION ( "TRUE" ),
+	 .FACTORY_JF ( 16'h8080 ),
+	 .PHASE_SHIFT ( 0 ),
+	 .STARTUP_WAIT ( "FALSE" ))
+   clk_doubler (.CLKFB(clk_fb), .CLKIN(clk_fpga_in), .RST(dcm_rst), 
+                .DSSEN(0), .PSCLK(0), .PSEN(0), .PSINCDEC(0), .PSDONE(), 
+		.CLKDV(), .CLKFX(), .CLKFX180(), 
+                .CLK2X(), .CLK2X180(), 
+                .CLK0(clk_fb), .CLK90(clk_fpga), .CLK180(), .CLK270(), 
+                .LOCKED(dcm_locked), .STATUS());
+   
+   // /////////////////////////////////////////////////////////////////////////
+   // SPI
+   wire  mosi, sclk, miso;
+   assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0;
+   assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0;
+   assign { sclk_codec, mosi_codec } = ~sen_codec ? {sclk,mosi} : 2'b0;
+   assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0;
+   assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
+		 (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
+
+   // /////////////////////////////////////////////////////////////////////////
+   // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL
+
+   assign TXBLANK = 0;
+   wire [13:0] tx_i, tx_q;
+
+   reg[13:0] delay_q;
+   always @(posedge clk_fpga)
+     delay_q <= tx_q;
+   
+   genvar i;
+   generate
+      for(i=0;i<14;i=i+1)
+	begin : gen_dacout
+	   ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" 
+		   .INIT(1'b0),            // Sets initial state of the Q output to 1'b0 or 1'b1
+		   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
+	   ODDR2_inst (.Q(TX[i]),      // 1-bit DDR output data
+		       .C0(clk_fpga),  // 1-bit clock input
+		       .C1(~clk_fpga), // 1-bit clock input
+		       .CE(1'b1),      // 1-bit clock enable input
+		       .D0(tx_i[i]),   // 1-bit data input (associated with C0)
+		       .D1(delay_q[i]),   // 1-bit data input (associated with C1)
+		       .R(1'b0),       // 1-bit reset input
+		       .S(1'b0));      // 1-bit set input
+	end // block: gen_dacout
+      endgenerate
+   ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" 
+	   .INIT(1'b0),            // Sets initial state of the Q output to 1'b0 or 1'b1
+	   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
+   ODDR2_txsnc (.Q(TXSYNC),      // 1-bit DDR output data
+		.C0(clk_fpga),  // 1-bit clock input
+		.C1(~clk_fpga), // 1-bit clock input
+		.CE(1'b1),      // 1-bit clock enable input
+		.D0(1'b0),   // 1-bit data input (associated with C0)
+		.D1(1'b1),   // 1-bit data input (associated with C1)
+		.R(1'b0),       // 1-bit reset input
+		.S(1'b0));      // 1-bit set input
+   
+   // /////////////////////////////////////////////////////////////////////////
+   // Main U1E Core
+   u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb),
+		     .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
+		     .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD),
+		     .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
+		     .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5), 
+		     .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
+		     .db_sda(db_sda), .db_scl(db_scl),
+		     .sclk(sclk), .sen({cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
+		     .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), 
+		     .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel),
+		     .tx_have_space(overo_gpio144), .tx_underrun(overo_gpio145),
+		     .rx_have_data(overo_gpio146), .rx_overrun(overo_gpio147),
+		     .io_tx(io_tx), .io_rx(io_rx),
+		     .tx_i(tx_i), .tx_q(tx_q), 
+		     .rx_i(DA), .rx_q(DB),
+		     .misc_gpio( {{overo_gpio128,overo_gpio163,overo_gpio170,overo_gpio176},
+				  {overo_gpio0,overo_gpio14,overo_gpio21,overo_gpio22},
+				  {overo_gpio23,overo_gpio64,overo_gpio65,overo_gpio127}}),
+		     .pps_in(PPS_IN) );
+
+   // /////////////////////////////////////////////////////////////////////////
+   // Local Debug
+   // assign debug_clk = {clk_fpga, clk_2x };
+   // assign debug = { TXSYNC, TXBLANK, TX };
+   
+endmodule // u1e