Merge branch 'next'

6 files changed, 113 insertions, 68 deletions

diff --git a/fpga/usrp2/top/B100/B100.ucf b/fpga/usrp2/top/B100/B100.ucf
index 69fd49971..1c04c5d8d 100644
--- a/fpga/usrp2/top/B100/B100.ucf
+++ b/fpga/usrp2/top/B100/B100.ucf
@@ -25,6 +25,9 @@ NET "reset_n"  LOC = "D5"  ;
 NET "PPS_IN"  LOC = "M14"  ;
 NET "reset_codec"  LOC = "B14"  ;
 
+## recycles fpga_cfg_cclk for reset from fw
+NET "ext_reset"  LOC = "R14"  ;
+
 ## GPIF
 NET "GPIF_D<15>"  LOC = "P7"  ;
 NET "GPIF_D<14>"  LOC = "N8"  ;
@@ -43,17 +46,18 @@ NET "GPIF_D<2>"  LOC = "N9"  ;
 NET "GPIF_D<1>"  LOC = "P9"  ;
 NET "GPIF_D<0>"  LOC = "P8"  ;
 
-NET "GPIF_CTL<3>"  LOC = "N5"  ;
+##NET "GPIF_CTL<3>"  LOC = "N5"  ;
+NET "GPIF_CTL<3>"  LOC = "P12"  ;
 NET "GPIF_CTL<2>"  LOC = "M11"  ;
 NET "GPIF_CTL<1>"  LOC = "M9"  ;
 NET "GPIF_CTL<0>"  LOC = "M7"  ;
 
-NET "GPIF_RDY<3>"  LOC = "N11"  ;
-NET "GPIF_RDY<2>"  LOC = "T10"  ;
-NET "GPIF_RDY<1>"  LOC = "T4"  ;
-NET "GPIF_RDY<0>"  LOC = "R5"  ;
+##NET "GPIF_RDY<3>"  LOC = "N11"  ;
+##NET "GPIF_RDY<2>"  LOC = "T10"  ;
+NET "GPIF_SLWR"  LOC = "T4"  ;
+NET "GPIF_SLRD"  LOC = "R5"  ;
 
-NET "GPIF_CS"  LOC = "P12"  ;
+##NET "GPIF_CS"  LOC = "P12"  ;
 NET "GPIF_SLOE"  LOC = "R11"  ;
 NET "GPIF_PKTEND"  LOC = "P10"  ;
 NET "GPIF_ADR<0>"  LOC = "T11"  ;
diff --git a/fpga/usrp2/top/B100/B100.v b/fpga/usrp2/top/B100/B100.v
index f2d75c54e..dcda974b4 100644
--- a/fpga/usrp2/top/B100/B100.v
+++ b/fpga/usrp2/top/B100/B100.v
@@ -23,8 +23,8 @@ module B100
    output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
 
    // GPIF
-   inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY,
-   input [1:0] GPIF_ADR, output GPIF_CS, output GPIF_SLOE, output GPIF_PKTEND,
+   inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, 
+   output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND,
    input IFCLK,
    
    inout SDA_FPGA, inout SCL_FPGA, // I2C
@@ -41,7 +41,8 @@ module B100
    input [11:0] adc, input RXSYNC,
   
    input PPS_IN,
-   input reset_n, output reset_codec
+   input reset_n, output reset_codec,
+   input ext_reset
    );
 
    assign reset_codec = 1;  // Believed to be active low
@@ -55,7 +56,7 @@ module B100
 
    BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga));
    
-   reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset));
+   reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset));
    
    // /////////////////////////////////////////////////////////////////////////
    // SPI
@@ -156,9 +157,10 @@ module B100
    u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset),
 		     .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
 		     .debug_txd(), .debug_rxd(1'b1),
-		     .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY),
-		     .gpif_misc({GPIF_CS,GPIF_SLOE,GPIF_PKTEND}),
-		     .gpif_clk(IFCLK),
+		     
+		     .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND),
+		     .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD),
+		     .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK),
 
 		     .db_sda(SDA_FPGA), .db_scl(SCL_FPGA),
 		     .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso),
diff --git a/fpga/usrp2/top/B100/Makefile.B100 b/fpga/usrp2/top/B100/Makefile.B100
index 90dd25942..3cdbb62c0 100644
--- a/fpga/usrp2/top/B100/Makefile.B100
+++ b/fpga/usrp2/top/B100/Makefile.B100
@@ -1,5 +1,5 @@
 #
-# Copyright 2008 Ettus Research LLC
+# Copyright 2008-2012 Ettus Research LLC
 #
 
 ##################################################
@@ -7,7 +7,14 @@
 ##################################################
 TOP_MODULE := B100
 BUILD_DIR := build-B100/
-export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise
+
+# set me in a custom makefile
+CUSTOM_SRCS =
+CUSTOM_DEFS =
+
+##################################################
+# Include other makefiles
+##################################################
 
 include ../Makefile.common
 include ../../fifo/Makefile.srcs
@@ -50,7 +57,7 @@ SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
 $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
 $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \
 $(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \
-$(GPIF_SRCS)
+$(GPIF_SRCS) $(CUSTOM_SRCS)
 
 ##################################################
 # Process Properties
@@ -63,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \
 "Register Balancing" Yes \
 "Use Clock Enable" Auto \
 "Use Synchronous Reset" Auto \
-"Use Synchronous Set" Auto
+"Use Synchronous Set" Auto \
+"Verilog Macros" "$(CUSTOM_MOD_DEFS)"
 
 TRANSLATE_PROPERTIES = \
 "Macro Search Path" "$(shell pwd)/../../coregen/"
diff --git a/fpga/usrp2/top/B100/core_compile b/fpga/usrp2/top/B100/core_compile
index b2ccc8b49..b62cbaee0 100755
--- a/fpga/usrp2/top/B100/core_compile
+++ b/fpga/usrp2/top/B100/core_compile
@@ -1 +1 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v  2>&1   | grep -v timescale | grep -v coregen | grep -v models
+iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v  2>&1   | grep -v timescale | grep -v coregen | grep -v models
diff --git a/fpga/usrp2/top/B100/timing.ucf b/fpga/usrp2/top/B100/timing.ucf
index b2a455f6d..96c47cf2c 100644
--- a/fpga/usrp2/top/B100/timing.ucf
+++ b/fpga/usrp2/top/B100/timing.ucf
@@ -3,3 +3,12 @@ TIMESPEC "TS_CLK_FPGA_P" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %;
 
 NET "IFCLK" TNM_NET = "IFCLK";
 TIMESPEC "TS_IFCLK" = PERIOD "IFCLK" 20833 ps HIGH 50 %;
+
+#constrain FX2 IO
+NET "GPIF_D<*>" MAXDELAY = 5.5 ns;
+NET "GPIF_CTL<*>" MAXDELAY = 5.5 ns;
+NET "GPIF_ADR<*>" MAXDELAY = 5.5ns;
+NET "GPIF_SLWR" MAXDELAY = 5.5 ns;
+NET "GPIF_SLRD" MAXDELAY = 5.5 ns;
+NET "GPIF_SLOE" MAXDELAY = 5.5 ns;
+NET "GPIF_PKTEND" MAXDELAY = 5.5 ns;
diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v
index c883c5ca8..e335fb8bb 100644
--- a/fpga/usrp2/top/B100/u1plus_core.v
+++ b/fpga/usrp2/top/B100/u1plus_core.v
@@ -1,5 +1,5 @@
 //
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
 //
 // This program is free software: you can redistribute it and/or modify
 // it under the terms of the GNU General Public License as published by
@@ -23,8 +23,9 @@ module u1plus_core
    output debug_txd, input debug_rxd,
    
    // GPIF
-   inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy,
-   output [2:0] gpif_misc, input gpif_clk,
+   inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe,
+   output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr,
+   input gpif_clk,
    
    inout db_sda, inout db_scl,
    output sclk, output [15:0] sen, output mosi, input miso,
@@ -37,7 +38,7 @@ module u1plus_core
    );
 
    localparam TXFIFOSIZE = 11;
-   localparam RXFIFOSIZE = 11;
+   localparam RXFIFOSIZE = 12;
 
    // 64 total regs in address space
    localparam SR_RX_CTRL0 = 0;       // 9 regs (+0 to +8)
@@ -52,9 +53,9 @@ module u1plus_core
    localparam SR_TX_FRONT = 54;      // 5 regs (+0 to +4)
 
    localparam SR_REG_TEST32 = 60;    // 1 reg
-   localparam SR_CLEAR_RX_FIFO = 61; // 1 reg
-   localparam SR_CLEAR_TX_FIFO = 62; // 1 reg
+   localparam SR_CLEAR_FIFO = 61;    // 1 reg
    localparam SR_GLOBAL_RESET = 63;  // 1 reg
+   localparam SR_USER_REGS = 64;     // 2 regs
 
    localparam SR_GPIO = 128;         // 5 regs
    
@@ -64,11 +65,11 @@ module u1plus_core
    wire 	pps_int;
    wire [63:0] 	vita_time, vita_time_pps;
    reg [15:0] 	reg_cgen_ctrl, reg_test;
-   
-   wire [7:0] 	set_addr;
-   wire [31:0] 	set_data;
-   wire 	set_stb;
-   
+
+   wire [7:0]  set_addr, set_addr_user;
+   wire [31:0] set_data, set_data_user;
+   wire        set_stb, set_stb_user;
+
    wire [31:0]  debug0;
    wire [31:0]  debug1;
 
@@ -105,68 +106,70 @@ module u1plus_core
    wire 	 tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, 
 		 tx_err_src_rdy, tx_err_dst_rdy;
 
-   wire 	 clear_tx, clear_rx;
-   
-   setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx
-     (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(),.changed(clear_rx));
+   wire 	 clear_fifo;
 
-   setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx
+   setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo
      (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(),.changed(clear_tx));
+      .in(set_data),.out(),.changed(clear_fifo));
 
-   gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
-   gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d),
-	 .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc),
+   wire 	 run_rx0, run_rx1;
+
+   slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
+   slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d),
+	 .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd),
+     .pktend(gpif_pktend), .fifoadr(gpif_fifoadr),
 	 
 	 .wb_clk(wb_clk), .wb_rst(wb_rst),
 	 .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso),
 	 .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we),
 	 .wb_ack_i(m0_ack), .triggers(8'd0),
 	 
-	 .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx),
+	 .dsp_rx_run(run_rx0 | run_rx1),
+	 
+	 .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo),
 	 .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy),
 	 .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
 	 .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy),
 	 
 	 .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif),
 
-	 .frames_per_packet(frames_per_packet),
+	 .test_len(0), .test_rate(0), .test_ctrl(0),
 	 .debug0(debug0), .debug1(debug1));
 
    // /////////////////////////////////////////////////////////////////////////
    // RX ADC Frontend, does IQ Balance, DC Offset, muxing
 
-   wire [23:0] 	 adc_i, adc_q;  // 24 bits is total overkill here, but it matches u2/u2p
-   wire 	 run_rx0, run_rx1;
-   
+   wire [23:0] 	 rx_fe_i, rx_fe_q;  // 24 bits is total overkill here, but it matches u2/u2p
+
    rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
      (.clk(wb_clk),.rst(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
       .adc_a({rx_i,4'b00}),.adc_ovf_a(0),
       .adc_b({rx_q,4'b00}),.adc_ovf_b(0),
-      .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug());
+      .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug());
    
    // /////////////////////////////////////////////////////////////////////////
    // DSP RX 0
 
    wire [31:0] 	 sample_rx0;
-   wire 	 strobe_rx0;
+   wire 	 strobe_rx0, clear_rx0;
    wire [35:0] 	 vita_rx_data0;
    wire 	 vita_rx_src_rdy0, vita_rx_dst_rdy0;
    
-   dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0
-     (.clk(wb_clk),.rst(wb_rst),
+   ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0
+     (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
+      .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
       .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
       .debug() );
 
-   vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0
-     (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
+   vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0
+     (.clk(wb_clk),.reset(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
       .vita_time(vita_time), .overrun(rx_overrun_dsp0),
-      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
+      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0),
       .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0),
       .debug() );
    
@@ -174,22 +177,24 @@ module u1plus_core
    // DSP RX 1
 
    wire [31:0] 	 sample_rx1;
-   wire 	 strobe_rx1;
+   wire 	 strobe_rx1, clear_rx1;
    wire [35:0] 	 vita_rx_data1;
    wire 	 vita_rx_src_rdy1, vita_rx_dst_rdy1;
    
-   dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1
-     (.clk(wb_clk),.rst(wb_rst),
+   ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1
+     (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
+      .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
       .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
       .debug() );
 
-   vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1
-     (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx),
+   vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1
+     (.clk(wb_clk),.reset(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
       .vita_time(vita_time), .overrun(rx_overrun_dsp1),
-      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
+      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1),
       .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1),
       .debug() );
 
@@ -197,7 +202,7 @@ module u1plus_core
    // RX Stream muxing
 
    fifo36_mux #(.prio(0)) mux_data_streams
-     (.clk(wb_clk), .reset(wb_rst), .clear(0),
+     (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo),
       .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0),
       .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1),
       .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
@@ -205,27 +210,38 @@ module u1plus_core
    // ///////////////////////////////////////////////////////////////////////////////////
    // DSP TX
 
-   wire [23:0] 	 tx_i_int, tx_q_int;
    wire 	 run_tx;
-   
-   vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), 
+   wire [23:0] 	 tx_fe_i, tx_fe_q;
+   wire [31:0]   sample_tx;
+   wire strobe_tx, clear_tx;
+
+   vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11),
 		   .REPORT_ERROR(1), .DO_FLOW_CONTROL(0),
 		   .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0),
 		   .DSP_NUMBER(0)) 
    vita_tx_chain
      (.clk(wb_clk), .reset(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
       .vita_time(vita_time),
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .tx_i(tx_i_int),.tx_q(tx_q_int),
-      .underrun(tx_underrun_dsp), .run(run_tx),
+      .sample(sample_tx), .strobe(strobe_tx),
+      .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx),
       .debug(debug_vt));
 
+   duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain
+     (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx),
+      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
+      .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q),
+      .sample(sample_tx), .run(run_tx), .strobe(strobe_tx),
+      .debug() );
+
    tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend
      (.clk(wb_clk), .rst(wb_rst),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1),
+      .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1),
       .dac_a(tx_i), .dac_b(tx_q));
 
    // /////////////////////////////////////////////////////////////////////////////////////
@@ -387,11 +403,17 @@ module u1plus_core
       .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack),
       .strobe(set_stb),.addr(set_addr),.data(set_data) );
 
+   user_settings #(.BASE(SR_USER_REGS)) user_settings
+     (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb),
+      .set_addr(set_addr),.set_data(set_data),
+      .set_addr_user(set_addr_user),.set_data_user(set_data_user),
+      .set_stb_user(set_stb_user) );
+
    // /////////////////////////////////////////////////////////////////////////
    // Readback mux 32 -- Slave #7
 
    //compatibility number -> increment when the fpga has been sufficiently altered
-   localparam compat_num = {16'd8, 16'd1}; //major, minor
+   localparam compat_num = {16'd9, 16'd0}; //major, minor
 
    wire [31:0] reg_test32;
 
@@ -416,7 +438,7 @@ module u1plus_core
    // /////////////////////////////////////////////////////////////////////////
    // VITA Timing
 
-   time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit
+   time_64bit #(.BASE(SR_TIME64)) time_64bit
      (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
       .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int),
       .exp_time_in(0));