diff options
| author | Josh Blum <josh@joshknows.com> | 2010-04-15 11:24:24 -0700 |
|---|---|---|
| committer | Josh Blum <josh@joshknows.com> | 2010-04-15 11:24:24 -0700 |
| commit | 05d77f772317de5d925301aa11bb9a880656dd05 (patch) | |
| tree | 0910bfb9265fab1644a3d3a1706719f1b038d193 /fpga/usrp2/models/CY7C1356C | |
| parent | 16818dc98e97b69a028c47e66ebfb16e32565533 (diff) | |
| download | uhd-05d77f772317de5d925301aa11bb9a880656dd05.tar.gz uhd-05d77f772317de5d925301aa11bb9a880656dd05.tar.bz2 uhd-05d77f772317de5d925301aa11bb9a880656dd05.zip | |
moved usrp1 and usrp2 fpga dirs into fpga subdirectory
Diffstat (limited to 'fpga/usrp2/models/CY7C1356C')
| -rw-r--r-- | fpga/usrp2/models/CY7C1356C/cy1356.inp | 140 | ||||
| -rw-r--r-- | fpga/usrp2/models/CY7C1356C/cy1356.v | 485 | ||||
| -rw-r--r-- | fpga/usrp2/models/CY7C1356C/readme.txt | 33 | ||||
| -rw-r--r-- | fpga/usrp2/models/CY7C1356C/testbench.v | 189 |
4 files changed, 847 insertions, 0 deletions
diff --git a/fpga/usrp2/models/CY7C1356C/cy1356.inp b/fpga/usrp2/models/CY7C1356C/cy1356.inp new file mode 100644 index 000000000..a55ffac39 --- /dev/null +++ b/fpga/usrp2/models/CY7C1356C/cy1356.inp @@ -0,0 +1,140 @@ +/*Address inputs only 0=LOW + "Data is in HEX, four bytes (LSB,MSB)" 1=HIGH + ZZZZZZZZZZZZZZZZ=Tri-state G-WRITE = Global Write + XXXXXXXXXXXXXXXX= Don't care B-WRITE = Byte Write + YYYY=unknown BG-WRITE = BURST GLOBAL WRITE + BB-WRITE = BURST BYTE WRITE + +*/ +// CE3# BW2# ADV/LD# +// CEN# CE2 WE# +// Add IN OUT CE1# BW1# +0000000000000000_XXXXXXXXXXXXXXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000001_XXXXXXXXXXXXXXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000010_0000000000000000_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000011_0000000000000001_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000100_0000000000000010_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000101_0000000000000011_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000110_0000000000000100_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000111_0000000000000101_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001000_0000000000000110_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001001_0000000000000111_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001010_0000000000001000_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001011_0000000000001001_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001100_0000000000001010_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001101_0000000000001011_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001110_0000000000001100_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001111_0000000000001101_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000000000_0000000000001110_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000000001_0000000000001111_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000000010_xxxxxxxxxxxxxxxx_0000000000000000_0_0_1_0_1_X_X_0 +0000000000000011_xxxxxxxxxxxxxxxx_0000000000000001_0_0_1_0_1_X_X_0 +0000000000000100_xxxxxxxxxxxxxxxx_0000000000000010_0_0_1_0_1_X_X_0 +0000000000000101_xxxxxxxxxxxxxxxx_0000000000000011_0_0_1_0_1_X_X_0 +0000000000000110_xxxxxxxxxxxxxxxx_0000000000000100_0_0_1_0_1_X_X_0 +0000000000000111_xxxxxxxxxxxxxxxx_0000000000000101_0_0_1_0_1_X_X_0 +0000000000001000_xxxxxxxxxxxxxxxx_0000000000000110_0_0_1_0_1_X_X_0 +0000000000001001_xxxxxxxxxxxxxxxx_0000000000000111_0_0_1_0_1_X_X_0 +0000000000001010_xxxxxxxxxxxxxxxx_0000000000001000_0_0_1_0_1_X_X_0 +0000000000001011_xxxxxxxxxxxxxxxx_0000000000001001_0_0_1_0_1_X_X_0 +0000000000001100_xxxxxxxxxxxxxxxx_0000000000001010_0_0_1_0_1_X_X_0 +0000000000001101_xxxxxxxxxxxxxxxx_0000000000001011_0_0_1_0_1_X_X_0 +0000000000001110_xxxxxxxxxxxxxxxx_0000000000001100_0_0_1_0_1_X_X_0 +0000000000001111_xxxxxxxxxxxxxxxx_0000000000001101_0_0_1_0_1_X_X_0 +0000000000000000_xxxxxxxxxxxxxxxx_0000000000001110_0_0_1_0_0_0_0_0 +0000000000001111_xxxxxxxxxxxxxxxx_0000000000001111_0_0_1_0_1_X_X_0 +0000000000000000_0001000100010001_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_1_0_0 +0000000000000000_xxxxxxxxxxxxxxxx_0000000000001111_0_0_1_0_1_X_X_0 +0000000000001100_XXXX1010XXXX1010_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_0_0 +0000000000001011_xxxxxxxxxxxxxxxx_0001101000011010_0_0_1_0_1_X_X_0 +0000000000000111_0010001000100010_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_1_0 +0000000000000111_xxxxxxxxxxxxxxxx_0000000000001011_0_0_1_0_1_X_X_0 +0000000000001000_001100110011XXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000001001_xxxxxxxxxxxxxxxx_0011001100110111_0_0_1_0_0_0_0_0 +0000000000001001_xxxxxxxxxxxxxxxx_0000000000001000_0_0_1_0_0_0_1_0 +0000000000001001_0100010001000100_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_1_1_0 +0000000000001010_XXXX01010101XXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_1_1_0 +0000000000000000_xxxxxxxxxxxxxxxx_0100010101010100_0_0_1_0_0_0_0_0 +0000000000000001_xxxxxxxxxxxxxxxx_0000000000001010_0_0_1_0_0_0_0_0 +0000000000001001_0110011001100110_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000000000_0111011101110111_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000000101_xxxxxxxxxxxxxxxx_0100010101010100_0_0_1_0_0_0_1_0 +0000000000000100_xxxxxxxxxxxxxxxx_0110011001100110_0_0_1_0_0_1_0_0 +0000000000000001_1000XXXX1000XXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000000010_XXXX1001XXXX1001_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000001100_xxxxxxxxxxxxxxxx_0111011101110111_0_0_1_0_0_1_1_0 +0000000000001101_xxxxxxxxxxxxxxxx_0000000000000010_0_0_1_0_0_0_0_0 +0000000000001010_00010001XXXXXXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000001011_0000111100001111_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +0000000000001100_xxxxxxxxxxxxxxxx_0000000000001010_0_0_1_0_1_X_X_0 +0000000000000011_xxxxxxxxxxxxxxxx_0000000000001011_0_0_1_0_0_0_0_0 +0000000000000100_xxxxxxxxxxxxxxxx_0001000100100010_0_0_1_0_0_0_1_0 +0000000000000101_0011001100110011_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_0_0 +0000000000000011_010001000100XXXX_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000100_0101010101010101_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000101_xxxxxxxxxxxxxxxx_0011001100110011_0_0_1_0_1_X_X_0 +0000000000000110_xxxxxxxxxxxxxxxx_0100010001001001_0_0_1_0_0_0_0_0 +0000000000000111_xxxxxxxxxxxxxxxx_0101010101010101_0_0_1_0_0_0_0_0 +0000000000001000_0110011001100110_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_0_0 +0000000000000110_0111011101110111_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000111_1000100010001000_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000001000_xxxxxxxxxxxxxxxx_0110011001100110_0_0_1_0_1_X_X_0 +0000000000000110_xxxxxxxxxxxxxxxx_0111011101110111_0_0_1_0_0_0_1_0 +0000000000000111_xxxxxxxxxxxxxxxx_1000100010001000_0_0_1_0_0_1_0_0 +0000000000001000_0001XXXX0001XXXX_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_1_0 +0000000000000110_XXXX0001XXXX0001_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000111_0001XXXX0001XXXX_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000001000_xxxxxxxxxxxxxxxx_0001011000010110_0_0_1_0_1_X_X_0 +0000000000001001_xxxxxxxxxxxxxxxx_0111000101110001_0_0_1_0_0_1_1_0 +0000000000001010_xxxxxxxxxxxxxxxx_0001100000011000_0_0_1_0_0_0_0_0 +0000000000001011_00100010XXXXXXXX_xxxxxxxxxxxxxxxx_0_0_1_0_0_1_1_0 +0000000000000001_XXXXXXXX00110011_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000010_01000100XXXXXXXX_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000011_xxxxxxxxxxxxxxxx_0111011101110111_0_0_1_0_1_X_X_0 +0000000000000100_xxxxxxxxxxxxxxxx_0000000000000010_0_0_1_0_1_X_X_0 +0000000000000001_xxxxxxxxxxxxxxxx_0011001100110011_0_0_1_0_0_0_0_0 +0000000000000010_xxxxxxxxxxxxxxxx_0100010001001001_0_0_1_0_0_0_0_0 +0000000000000011_0001000100010001_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_0_0 +0000000000000100_0010001000100010_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_0_0 +0000000000000001_0011001100110011_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000010_0100010001000100_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000011_xxxxxxxxxxxxxxxx_0001000100010001_0_0_1_0_1_X_X_0 +0000000000000100_xxxxxxxxxxxxxxxx_0010001000100010_0_0_1_0_1_X_X_0 +0000000000000101_xxxxxxxxxxxxxxxx_0011001100110011_0_0_1_0_0_0_0_0 +0000000000000110_xxxxxxxxxxxxxxxx_0100010001000100_0_X_X_X_X_0_0_1 +0000000000000111_0101010101010101_xxxxxxxxxxxxxxxx_0_X_X_X_X_1_1_1 +0000000000001000_0110011001100110_xxxxxxxxxxxxxxxx_0_X_X_X_X_0_0_1 +0000000000000101_01110111XXXXXXXX_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +XXXXXXXXXXXXXXXX_XXXXXXXX10001000_xxxxxxxxxxxxxxxx_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0101010101010101_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0110011001100110_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0111011101110001_0_1_X_X_X_X_X_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0100010010001000_1_X_X_X_X_X_X_X +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0100010010001000_0_X_0_X_X_X_X_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_ZZZZZZZZZZZZZZZZ_0_X_X_1_X_X_X_0 +0000000000000101_xxxxxxxxxxxxxxxx_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_ZZZZZZZZZZZZZZZZ_1_X_X_X_X_X_X_X +0000000000001000_xxxxxxxxxxxxxxxx_ZZZZZZZZZZZZZZZZ_0_0_1_0_0_0_1_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0101010101010101_1_X_X_X_X_X_X_X +0000000000000111_xxxxxxxxxxxxxxxx_0101010101010101_0_0_1_0_1_X_X_0 +xxxxxxxxxxxxxxxx_XXXXXXXXXXXXXXXX_ZZZZZZZZZZZZZZZZ_1_X_X_X_X_X_X_X +0000000000001000_0000XXXX0000XXXX_ZZZZZZZZZZZZZZZZ_0_0_1_0_1_X_X_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0111011101110001_1_X_X_X_X_X_X_X +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0111011101110001_1_X_X_X_X_X_X_X +0000000000000000_xxxxxxxxxxxxxxxx_0111011101110001_0_0_1_0_1_X_X_0 +0000000000000001_xxxxxxxxxxxxxxxx_0000100000001000_0_0_1_0_1_X_X_0 +0000000000000001_xxxxxxxxxxxxxxxx_0110011001100110_0_0_1_0_0_1_1_0 +0000000000000001_xxxxxxxxxxxxxxxx_0001000100010001_0_0_1_0_0_1_1_0 +0000000000000001_0001XXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0_0_1_0_0_0_1_0 +0000000000000001_XXXX0010XXXXXXXX_xxxxxxxxxxxxxxxx_0_0_1_0_0_1_0_0 +0000000000000001_XXXXXXXX0011XXXX_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +0000000000000000_XXXXXXXXXXXX0100_xxxxxxxxxxxxxxxx_0_0_1_0_1_X_X_0 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0001001000110100_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0110011001100110_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0001001000110100_0_X_X_X_X_X_X_1 +XXXXXXXXXXXXXXXX_xxxxxxxxxxxxxxxx_0010001000100010_0_1_X_X_X_X_X_0 +xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxx_0011001100110011_0_1_x_x_x_x_x_x +xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxx_ZZZZZZZZZZZZZZZZ_0_1_x_x_x_x_x_x +//Lines =126 + + diff --git a/fpga/usrp2/models/CY7C1356C/cy1356.v b/fpga/usrp2/models/CY7C1356C/cy1356.v new file mode 100644 index 000000000..9197eea6d --- /dev/null +++ b/fpga/usrp2/models/CY7C1356C/cy1356.v @@ -0,0 +1,485 @@ +`define sb200
+//************************************************************************
+//************************************************************************
+//** This model is the property of Cypress Semiconductor Corp and is **
+//** protected by the US copyright laws, any unauthorized copying and **
+//** distribution is prohibited. Cypress reserves the right to change **
+//** any of the functional specifications without any prior notice. **
+//** Cypress is not liable for any damages which may result from the **
+//** use of this functional model. **
+//** **
+//** File Name : CY7C1356 **
+//** **
+//** Revision : 1.0 - 08/03/2004 **
+//** **
+//** The timings are to be selected by the user depending upon the **
+//** frequency of operation from the datasheet. **
+//** **
+//** Model : CY7C1356C - NoBL Pipelined SRAM **
+//** Queries : MPD Applications **
+//** Website: www.cypress.com/support **
+//************************************************************************
+//************************************************************************
+
+`timescale 1ns / 10ps
+
+// NOTE : Any setup/hold errors will force input signal to x state
+// or if results indeterminant (write addr) core is reset x
+
+// define fixed values
+
+`define wordsize (18 -1) //
+`define no_words (1048576 -1) // 1M x 18 RAM
+
+module cy1356 ( d, clk, a, bws, we_b, adv_lb, ce1b, ce2, ce3b, oeb, cenb, mode);
+
+inout [`wordsize:0] d;
+input clk, // clock input (R)
+ we_b, // byte write enable(L)
+ adv_lb, // burst(H)/load(L) address
+ ce1b, // chip enable(L)
+ ce2, // chip enable(H)
+ ce3b, // chip enable(L)
+ oeb, // async output enable(L)(read)
+ cenb, // clock enable(L)
+ mode; // interleave(H)/linear(L) burst
+input [1:0] bws; // byte write select(L)
+input [18:0] a; // address bus
+
+// *** NOTE DEVICE OPERATES #0.01 AFTER CLOCK ***
+// *** THEREFORE DELAYS HAVE TO TAKE THIS INTO ACCOUNT ***
+
+
+//**********************************************************************
+// Timings for 225MHz
+//**********************************************************************
+`ifdef sb225
+ `define teohz #2.8
+ `define teolz #0
+ `define tchz #2.8
+ `define tclz #1.25
+
+ `define tco #2.8
+ `define tdoh #1.25
+ `define tas 1.4
+ `define tah 0.4
+`endif
+//***********************************************************************
+// Timings for 200MHz
+//**********************************************************************
+`ifdef sb200
+ `define teohz #3.2
+ `define teolz #0
+ `define tchz #3.2
+ `define tclz #1.5
+
+ `define tco #3.2
+ `define tdoh #1.5
+
+ `define tas 1.5
+ `define tah 0.5
+`endif
+//***********************************************************************
+
+//**********************************************************************
+// This model is configured for 166 MHz Operation (CY7C1356-166).
+//**********************************************************************
+`ifdef sb166
+ `define teohz #3.5
+ `define teolz #0
+ `define tchz #3.5
+ `define tclz #1.5
+
+ `define tco #3.5
+ `define tdoh #1.5
+
+ `define tas 1.5
+ `define tah 0.5
+`endif
+
+reg notifier; // error support reg's
+reg noti1_0;
+reg noti1_1;
+reg noti1_2;
+reg noti1_3;
+reg noti1_4;
+reg noti1_5;
+reg noti1_6;
+reg noti2;
+
+
+wire chipen; // combined chip enable (high for an active chip)
+
+reg chipen_d; // _d = delayed
+reg chipen_o; // _o = operational = delayed sig or _d sig
+
+wire writestate; // holds 1 if any of writebus is low
+reg writestate_d;
+reg writestate_o;
+
+wire loadcyc; // holds 1 for load cycles (setup and hold checks)
+wire writecyc; // holds 1 for write cycles (setup and hold checks)
+wire [1:0] bws; // holds the bws values
+
+wire [1:0] writebusb; // holds the "internal" bws bus based on we_b
+reg [1:0] writebusb_d;
+reg [1:0] writebusb_o;
+
+wire [2:0] operation; // holds chipen, adv_ld and writestate
+reg [2:0] operation_d;
+reg [2:0] operation_o;
+
+wire [18:0] a; // address input bus
+reg [18:0] a_d;
+reg [18:0] a_o;
+
+reg [`wordsize:0] do; // data output reg
+reg [`wordsize:0] di; // data input bus
+reg [`wordsize:0] dd; // data delayed bus
+
+wire tristate; // tristate output (on a bytewise basis) when asserted
+reg cetri; // register set by chip disable which sets the tristate
+reg oetri; // register set by oe which sets the tristate
+reg enable; // register to make the ram enabled when equal to 1
+reg [18:0] addreg; // register to hold the input address
+reg [`wordsize:0] pipereg; // register for the output data
+
+reg [`wordsize:0] mem [0:`no_words]; // RAM array
+
+reg [`wordsize:0] writeword; // temporary holding register for the write data
+reg burstinit; // register to hold a[0] for burst type
+reg [18:0] i; // temporary register used to write to all mem locs.
+reg writetri; // tristate
+reg lw, bw; // pipelined write functions
+reg we_bl;
+
+
+wire [`wordsize:0] d = !tristate ? do[`wordsize:0] : 18'bz ; // data bus
+
+assign chipen = (adv_lb == 1 ) ? chipen_d :
+ ~ce1b & ce2 & ~ce3b ;
+
+assign writestate = ~& writebusb;
+
+assign operation = {chipen, adv_lb, writestate};
+
+assign writebusb[1:0] = ( we_b ==0 & adv_lb ==0) ? bws[1:0]:
+ ( we_b ==1 & adv_lb ==0) ? 2'b11 :
+ ( we_bl ==0 & adv_lb ==1) ? bws[1:0]:
+ ( we_bl ==1 & adv_lb ==1) ? 2'b11 :
+ 2'bxx ;
+
+assign loadcyc = chipen & !cenb;
+
+assign writecyc = writestate_d & enable & ~cenb & chipen; // check
+
+assign tristate = cetri | writetri | oetri;
+
+pullup (mode);
+
+// formers for notices/errors etc
+//
+//$display("NOTICE : xxx :");
+//$display("WARNING : xxx :");
+//$display("ERROR *** : xxx :");
+
+
+// initialize the output to be tri-state, ram to be disabled
+
+initial
+ begin
+// signals
+
+ writetri = 0;
+ cetri = 1;
+ enable = 0;
+ lw = 0;
+ bw = 0;
+
+// error signals
+
+ notifier = 0;
+ noti1_0 = 0;
+ noti1_1 = 0;
+ noti1_2 = 0;
+ noti1_3 = 0;
+ noti1_4 = 0;
+ noti1_5 = 0;
+ noti1_6 = 0;
+ noti2 = 0;
+
+end
+
+
+
+// asynchronous OE
+
+always @(oeb)
+begin
+ if (oeb == 1)
+ oetri <= `teohz 1;
+ else
+ oetri <= `teolz 0;
+end
+
+// *** SETUP / HOLD VIOLATIONS ***
+
+always @(noti2)
+begin
+$display("NOTICE : 020 : Data bus corruption");
+ force d =18'bx;
+ #1;
+ release d;
+end
+
+always @(noti1_0)
+begin
+$display("NOTICE : 010 : Byte write corruption");
+ force bws = 2'bx;
+ #1;
+ release bws;
+end
+
+always @(noti1_1)
+begin
+$display("NOTICE : 011 : Byte enable corruption");
+ force we_b = 1'bx;
+ #1;
+ release we_b;
+end
+
+always @(noti1_2)
+begin
+$display("NOTICE : 012 : CE1B corruption");
+ force ce1b =1'bx;
+ #1;
+ release ce1b;
+end
+
+always @(noti1_3)
+begin
+$display("NOTICE : 013 : CE2 corruption");
+ force ce2 =1'bx;
+ #1;
+ release ce2;
+end
+
+always @(noti1_4)
+begin
+$display("NOTICE : 014 : CE3B corruption");
+ force ce3b =1'bx;
+ #1;
+ release ce3b;
+end
+
+always @(noti1_5)
+begin
+$display("NOTICE : 015 : CENB corruption");
+ force cenb =1'bx;
+ #1;
+ release cenb;
+end
+
+always @(noti1_6)
+begin
+$display("NOTICE : 016 : ADV_LB corruption");
+ force adv_lb = 1'bx;
+ #1;
+ release adv_lb;
+end
+
+// synchronous functions from clk edge
+
+always @(posedge clk)
+if (!cenb)
+begin
+#0.01;
+ // latch conditions on adv_lb
+
+ if (adv_lb)
+ we_bl <= we_bl;
+ else
+ we_bl <= we_b;
+
+ chipen_d <= chipen;
+
+
+ chipen_o <= chipen;
+ writestate_o <= writestate;
+ writestate_d <= writestate_o;
+ writebusb_o <= writebusb;
+ writebusb_d <= writebusb_o;
+ operation_o <= operation;
+ a_o <= a;
+ a_d <= a_o;
+ di = d;
+
+ // execute previously pipelined fns
+
+ if (lw) begin
+ loadwrite;
+ lw =0;
+ end
+
+ if (bw) begin
+ burstwrite;
+ bw =0;
+ end
+
+ // decode input/piplined state
+
+ casex (operation_o)
+ 3'b0?? : turnoff;
+ 3'b101 : setlw;
+ 3'b111 : setbw;
+ 3'b100 : loadread;
+ 3'b110 : burstread;
+ default : unknown; // output unknown values and display an error message
+ endcase
+
+ do <= `tco pipereg;
+
+end
+
+// *** task section ***
+
+task read;
+begin
+ if (enable) cetri <= `tclz 0;
+ writetri <= `tchz 0;
+ do <= `tdoh 18'hx;
+ pipereg = mem[addreg];
+end
+endtask
+
+task write;
+begin
+ if (enable) cetri <= `tclz 0;
+ writeword = mem[addreg]; // set up a word to hold the data for the current location
+ /* overwrite the current word for the bytes being written to */
+ if (!writebusb_d[1]) writeword[17:9] = di[17:9];
+ if (!writebusb_d[0]) writeword[8:0] = di[8:0];
+ writeword = writeword & writeword; //convert z to x states
+ mem[addreg] = writeword; // store the new word into the memory location
+ //writetri <= `tchz 1; // tristate the outputs
+end
+endtask
+
+task setlw;
+begin
+ lw =1;
+ writetri <= `tchz 1; // tristate the outputs
+end
+endtask
+
+task setbw;
+begin
+ bw =1;
+ writetri <= `tchz 1; // tristate the outputs
+end
+endtask
+
+task loadread;
+begin
+ burstinit = a_o[0];
+ addreg = a_o;
+ enable = 1;
+ read;
+end
+endtask
+
+task loadwrite;
+begin
+ burstinit = a_d[0];
+ addreg = a_d;
+ enable = 1;
+ write;
+end
+endtask
+
+task burstread;
+begin
+ burst;
+ read;
+end
+endtask
+
+task burstwrite;
+begin
+ burst;
+ write;
+end
+endtask
+
+task unknown;
+begin
+ do = 18'bx;
+ // $display ("Unknown function: Operation = %b\n", operation);
+end
+endtask
+
+task turnoff;
+begin
+ enable = 0;
+ cetri <= `tchz 1;
+ pipereg = 18'h0;
+end
+endtask
+
+task burst;
+begin
+ if (burstinit == 0 || mode == 0)
+ begin
+ case (addreg[1:0])
+ 2'b00: addreg[1:0] = 2'b01;
+ 2'b01: addreg[1:0] = 2'b10;
+ 2'b10: addreg[1:0] = 2'b11;
+ 2'b11: addreg[1:0] = 2'b00;
+ default: addreg[1:0] = 2'bxx;
+ endcase
+ end
+ else
+ begin
+ case (addreg[1:0])
+ 2'b00: addreg[1:0] = 2'b11;
+ 2'b01: addreg[1:0] = 2'b00;
+ 2'b10: addreg[1:0] = 2'b01;
+ 2'b11: addreg[1:0] = 2'b10;
+ default: addreg[1:0] = 2'bxx;
+ endcase
+ end
+end
+endtask
+
+// IO checks
+
+specify
+// specify the setup and hold checks
+
+// notifier will wipe memory as result is indeterminent
+
+$setuphold(posedge clk &&& loadcyc, a, `tas, `tah, notifier);
+
+// noti1 should make ip = 'bx;
+
+$setuphold(posedge clk, bws, `tas, `tah, noti1_0);
+
+$setuphold(posedge clk, we_b, `tas, `tah, noti1_1);
+$setuphold(posedge clk, ce1b, `tas, `tah, noti1_2);
+$setuphold(posedge clk, ce2, `tas, `tah, noti1_3);
+$setuphold(posedge clk, ce3b, `tas, `tah, noti1_4);
+
+// noti2 should make d = 18'hxxxxx;
+
+$setuphold(posedge clk &&& writecyc, d, `tas, `tah, noti2);
+
+// add extra tests here.
+
+$setuphold(posedge clk, cenb, `tas, `tah, noti1_5);
+$setuphold(posedge clk, adv_lb, `tas, `tah, noti1_6);
+
+endspecify
+
+endmodule
+
+
diff --git a/fpga/usrp2/models/CY7C1356C/readme.txt b/fpga/usrp2/models/CY7C1356C/readme.txt new file mode 100644 index 000000000..3578c80dc --- /dev/null +++ b/fpga/usrp2/models/CY7C1356C/readme.txt @@ -0,0 +1,33 @@ +***************************
+Cypress Semiconductor
+MPD Applications
+Verilog model for NoBL SRAM CY7C1356
+Created: August 04, 2004
+Rev: 1.0
+***************************
+
+This is the verilog model for the CY7C1356 along with the testbench and test vectors.
+
+Contact support@cypress.com if you have any questions.
+
+This directory has 4 files. including this readme.
+
+1)cy7c1356c.v -> Verilog model for CY7C1356c
+
+2)cy1356.inp -> Test Vector File used for testing the verilog model
+
+3)testbench.v -> Test bench used for testing the verilog model
+
+
+COMPILING METHOD :
+------------------
+
+ verilog +define+<speed_bin> <Main File> <Test bench File>
+
+ Ex:
+ verilog +define+sb133 CY7C1356c.v testbench.v
+
+VERIFIED WITH:
+--------------
+
+VERILOG-XL 2.2
\ No newline at end of file diff --git a/fpga/usrp2/models/CY7C1356C/testbench.v b/fpga/usrp2/models/CY7C1356C/testbench.v new file mode 100644 index 000000000..5dde89e6c --- /dev/null +++ b/fpga/usrp2/models/CY7C1356C/testbench.v @@ -0,0 +1,189 @@ +`timescale 1ns / 10ps
+
+
+//
+// CY7C1356
+// Simulatiom of Verilog model
+//
+//
+
+//
+// test bench for US vector input
+//
+//
+
+// define speed 166MHz
+
+`define tx10 #6
+`define tx08 #4.8
+`define tx05 #3
+`define tx04 #2.4
+`define tx02 #1.2
+
+/*
+`define tx10 #4.0 // period
+`define tx08 #3.2 //0.8 period
+`define tx05 #2.0 //0.5 period 250MHZ
+`define tx04 #1.6 //0.4 period
+`define tx02 #0.8 //0.2 period
+
+`define tx10 #4.4 // period
+`define tx08 #3.52 //0.8 period
+`define tx05 #2.2 //0.5 period 225MHZ
+`define tx04 #1.76 //0.4 period
+`define tx02 #0.88 //0.2 period
+
+`define tx10 #5 // period
+`define tx08 #4 //0.8 period
+`define tx05 #2.5 //0.5 period 200MHZ
+`define tx04 #2.0 //0.4 period
+`define tx02 #1.0 //0.2 period
+*/
+
+
+module rw_test;
+
+`define num_vectors 126
+`define impi {a[15:0],io[15:0],tsti[15:0],cenb,ce1b,ce2,ce3b,bweb,bwb,adv_lb}
+
+
+reg [57:1] lsim_vectors [1:`num_vectors];
+
+
+reg clk;
+reg adv_lb;
+reg ce1b; //cs1b
+reg ce2; //cs2
+reg ce3b; //cs3b
+reg [1:0] bwb;
+reg bweb;
+reg oeb;
+reg ftb;
+reg mode; //lbob
+reg cenb; //zz
+reg tp42; //sclk
+reg tp39; //se
+reg tp38; //tm
+reg [19:0] a;
+reg [17:0] io;
+reg [17:0] tsti;
+reg vddq;
+reg vssqr;
+reg iosel;
+
+
+wire [17:0] d = iosel ? io[17:0] : 18'bz;
+
+reg noti3;
+reg strb,j;
+integer vector,i;
+
+
+
+cy1356 testram ( d, clk, a, bwb, bweb, adv_lb, ce1b, ce2, ce3b, oeb, cenb, mode);
+
+initial
+begin
+ $dumpfile("dumpfile.dump");
+ $dumpvars(0,rw_test);
+end
+
+initial
+begin
+io = 18'bz;
+ftb = 1;
+oeb = 0;
+a[19:16] = 4'h0;
+mode = 0;
+strb = 0;
+tp38 = 0;
+tp39 = 0;
+tp42 = 0;
+`tx02;
+forever `tx05 strb = ~strb;
+end
+
+initial
+begin
+clk = 0;
+forever `tx05 clk =~clk;
+end
+
+initial
+ begin
+
+ $readmemb("cy1356.inp", lsim_vectors); //load input vector file
+
+ `impi = lsim_vectors[1]; //apply 1st test vector
+
+ for (vector = 2; vector <= `num_vectors; vector = vector + 1)
+ @(posedge strb)
+ begin
+
+ `impi = lsim_vectors[vector];
+
+
+
+ io[16:13] = io[07:04];
+ io[12:09] = io[07:04];
+ io[07:04] = io[03:00];
+ io[03:00] = io[03:00];
+
+ io[17] = io[16] ^^ io[15] ^^ io[14] ^^ io[13] ^^ io[11] ^^ io[11] ^^ io[10] ^^ io[9];
+ io[8] = io[7] ^^ io[6] ^^ io[5] ^^ io[4] ^^ io[3] ^^ io[2] ^^ io[1] ^^ io[0];
+
+ tsti[16:13] = tsti[07:04];
+ tsti[12:09] = tsti[07:04];
+ tsti[07:04] = tsti[03:00];
+ tsti[03:00] = tsti[03:00];
+
+ tsti[17] = tsti[16] ^^ tsti[15] ^^ tsti[14] ^^ tsti[13] ^^ tsti[11] ^^ tsti[11] ^^ tsti[10] ^^ tsti[9];
+ tsti[8] = tsti[7] ^^ tsti[6] ^^ tsti[5] ^^ tsti[4] ^^ tsti[3] ^^ tsti[2] ^^ tsti[1] ^^ tsti[0];
+
+ if (io === 18'hxxxxx)
+ iosel = `tx05 0;
+ else
+ iosel = `tx05 1;
+
+ end
+ #15 $finish; // This prevents simulation beyond end of test patterns
+ end
+
+always@(posedge clk)
+begin
+
+ if (io !== 18'hxxxxx) //input cycle
+ begin
+ $display("NOTICE : 001 : line = %d OK",vector -1);
+ end
+ else //do the test
+ begin
+ if (d == tsti)
+ begin
+ $display("NOTICE : 002 : line = %d OK",vector -1);
+ end
+ else
+ begin
+ j =0;
+ for (i =0;i< 18; i=i+1)
+ begin
+ if(tsti[i] !== 1'bx)
+ begin
+ if (d[i] !== tsti[i]) j = 1;
+ end
+ else
+ j = 0;
+ end
+ if (j)
+ $display("ERROR *** : 003 : line = %d data = %b test = %b",vector -1,d,tsti);
+ else
+ $display("NOTICE : 003 : line = %d OK",vector -1);
+ end
+ end
+end
+
+endmodule
+
+
+
+
|