Merge branch 'master' into usrp2p

this was the merge from hell

Conflicts:

	firmware/microblaze/Makefile.am
	firmware/microblaze/bootstrap
	firmware/microblaze/configure.ac
	firmware/microblaze/lib/Makefile.inc
	host/lib/CMakeLists.txt
	host/lib/usrp/mimo_usrp.cpp
	host/lib/usrp/simple_usrp.cpp
	host/lib/usrp/usrp2/clock_ctrl.cpp
	host/lib/usrp/usrp2/codec_impl.cpp
	host/lib/usrp/usrp2/dboard_impl.cpp
	host/lib/usrp/usrp2/mboard_impl.cpp
	host/lib/usrp/usrp2/usrp2_iface.hpp
	host/lib/usrp/usrp2/usrp2_impl.hpp
	host/lib/usrp/usrp2/usrp2_regs.hpp
	host/test/CMakeLists.txt

1 files changed, 50 insertions, 0 deletions

diff --git a/fpga/usrp2/fifo/fifo36_demux.v b/fpga/usrp2/fifo/fifo36_demux.v
new file mode 100644
index 000000000..a54759d4d
--- /dev/null
+++ b/fpga/usrp2/fifo/fifo36_demux.v
@@ -0,0 +1,50 @@
+
+// Demux packets from a fifo based on the contents of the first line
+//  If first line matches the parameter and mask, send to data1, otherwise send to data0
+
+module fifo36_demux
+  #(parameter match_data = 0,
+    parameter match_mask = 0)
+   (input clk, input reset, input clear,
+    input [35:0] data_i, input src_rdy_i, output dst_rdy_o,
+    output [35:0] data0_o, output src0_rdy_o, input dst0_rdy_i,
+    output [35:0] data1_o, output src1_rdy_o, input dst1_rdy_i);
+
+   localparam DMX_IDLE = 0;
+   localparam DMX_DATA0 = 1;
+   localparam DMX_DATA1 = 2;
+   
+   reg [1:0] 	  state;
+
+   wire 	  match = |( (data_i ^ match_data) & match_mask );
+   wire 	  eof = data_i[33];
+   
+   always @(posedge clk)
+     if(reset | clear)
+       state <= DMX_IDLE;
+     else
+       case(state)
+	 DMX_IDLE :
+	   if(src_rdy_i)
+	     if(match)
+	       state <= DMX_DATA1;
+	     else
+	       state <= DMX_DATA0;
+	 DMX_DATA0 :
+	   if(src_rdy_i & dst0_rdy_i & eof)
+	     state <= DMX_IDLE;
+	 DMX_DATA1 :
+	   if(src_rdy_i & dst1_rdy_i & eof)
+	     state <= DMX_IDLE;
+	 default :
+	   state <= DMX_IDLE;
+       endcase // case (state)
+
+   assign dst_rdy_o = (state==DMX_IDLE) ? 0 : (state==DMX_DATA0) ? dst0_rdy_i : dst1_rdy_i;
+   assign src0_rdy_o = (state==DMX_DATA0) ? src_rdy_i : 0;
+   assign src1_rdy_o = (state==DMX_DATA1) ? src_rdy_i : 0;
+
+   assign data0_o = data_i;
+   assign data1_o = data_i;
+   
+endmodule // fifo36_demux