diff options
| author | Wade Fife <wade.fife@ettus.com> | 2021-06-08 19:40:46 -0500 |
|---|---|---|
| committer | Aaron Rossetto <aaron.rossetto@ni.com> | 2021-06-10 11:56:58 -0500 |
| commit | 6d3765605262016a80f71e36357f749ea35cbe5a (patch) | |
| tree | 7d62d6622befd4132ac1ee085effa1426f7f53e5 /fpga/docs/usrp3/build_instructions.md | |
| parent | f706b89e6974e28ce76aadeeb06169becc86acba (diff) | |
| download | uhd-6d3765605262016a80f71e36357f749ea35cbe5a.tar.gz uhd-6d3765605262016a80f71e36357f749ea35cbe5a.tar.bz2 uhd-6d3765605262016a80f71e36357f749ea35cbe5a.zip | |
fpga: x400: Add support for X410 motherboard FPGA
Co-authored-by: Andrew Moch <Andrew.Moch@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>
Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com>
Co-authored-by: Max Köhler <max.koehler@ni.com>
Co-authored-by: Michael Auchter <michael.auchter@ni.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Hector Rubio <hrubio@ni.com>
Diffstat (limited to 'fpga/docs/usrp3/build_instructions.md')
| -rw-r--r-- | fpga/docs/usrp3/build_instructions.md | 33 |
1 files changed, 32 insertions, 1 deletions
diff --git a/fpga/docs/usrp3/build_instructions.md b/fpga/docs/usrp3/build_instructions.md index d70c633b7..aa27792df 100644 --- a/fpga/docs/usrp3/build_instructions.md +++ b/fpga/docs/usrp3/build_instructions.md @@ -28,6 +28,7 @@ The following USRPs work with the free WebPack versions: - USRP E320: Zynq-7000 XC7Z045 (7 Series) - USRP N300: Zynq-7000 XC7Z035 (7 Series) - USRP N310/N320: Zynq-7000 XC7Z100 (7 Series) +- USRP X410: RFSoC XCZU28DR (UltraScale+) ### Requirements @@ -87,6 +88,7 @@ The following additional packages are also required and can be selected in the G + `e31x:` For USRP E310 + `e320:` For USRP E320 + `n3xx:` For USRP N300/N310/N320 + + `x400:` For USRP X410 - To add vivado to the PATH and to setup up the Ettus Xilinx build environment run + `source setupenv.sh` (If Vivado is installed in the default path /opt/Xilinx/Vivado) _OR_ @@ -101,7 +103,8 @@ The following additional packages are also required and can be selected in the G ### Environment Utilities -The build environment also defines many ease-of-use utilities. Please use the \subpage md_usrp3_vivado_env_utils "Vivado Utility Reference" page for +The build environment also defines many ease-of-use utilities. Please use +the \subpage md_usrp3_vivado_env_utils "Vivado Utility Reference" page for a list and usage information ## Build Instructions (Xilinx ISE only) @@ -217,6 +220,34 @@ For the N320 targets see also the N320 manual page on the UHD manual. - `build/usrp_<product>_fpga.dts` : Device tree overlay - `build/usrp_<product>_fpga.rpt` : System, utilization and timing summary report +### X4x0 Targets and Outputs + +#### Supported Targets + +Unlike the USRP X310, the target types do not only describe the connector +configuration, but also the available master clock rates. For example, the FPGA +target type `X4_200` is configured for a 200 MHz analog bandwidth, and can +support a 245.76 MHz or 250 MHz master clock rate. + +A more detailed description of the targets can be found at \ref x4xx_updating_fpga_types. +The following targets are available through the Makefile: + +- `X1_100` +- `X4_{100, 200}` +- `XG_{100, 200}` +- `X4_{100, 200}` + +The following bitstreams can be built, but are considered experimental: + +- `X4C_{100, 200}` +- `C1_400` +- `CG_{100, 400}` + +#### Outputs +- `build/usrp_<product>_fpga.bit` : Configuration bitstream with header +- `build/usrp_<product>_fpga.dts` : Device tree overlay +- `build/usrp_<product>_fpga.rpt` : System, utilization and timing summary report + ### Additional Build Options It is possible to make a target and specify additional options in the form VAR=VALUE in |