zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

1 files changed, 71 insertions, 0 deletions

diff --git a/firmware/zpu/usrp2p/Makefile.am b/firmware/zpu/usrp2p/Makefile.am
new file mode 100644
index 000000000..40766b406
--- /dev/null
+++ b/firmware/zpu/usrp2p/Makefile.am
@@ -0,0 +1,71 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(top_srcdir)/Makefile.common
+
+AM_CFLAGS = \
+	$(COMMON_CFLAGS) \
+	-DUSRP2P
+
+AM_LDFLAGS = \
+	$(COMMON_LFLAGS) \
+	-Wl,-defsym -Wl,_TEXT_START_ADDR=0x8050 \
+	-Wl,-defsym -Wl,_STACK_SIZE=3072
+
+LDADD = libusrp2p.a
+
+#all of this here is to relocate the hardware vectors to somewhere normal.
+RELOCATE_ARGS = \
+	--change-section-address .vectors.sw_exception+0x8000 \
+	--change-section-address .vectors.hw_exception+0x8000 \
+	--change-section-address .vectors.interrupt+0x8000 \
+	--change-section-address .vectors.reset+0x8000
+
+#	$(MB_OBJCOPY) -O ihex $< $@
+# the below would work if objcopy weren't written by apes
+#	$(MB_OBJCOPY) -O ihex -w --change-section-address .vectors*+0x8000 $< $@
+# using the below will throw away the interrupt vectors when they get relocated below 0x0000.
+#	$(MB_OBJCOPY) -O ihex --change-addresses -0x8000 $< $@
+
+########################################################################
+# USRP2P specific library and programs
+########################################################################
+noinst_LIBRARIES = libusrp2p.a
+
+libusrp2p_a_SOURCES = \
+	$(COMMON_SRCS) \
+	spif.c \
+	spi_flash.c \
+	spi_flash_read.c \
+	bootloader_utils.c \
+	ethernet.c \
+	xilinx_s3_icap.c \
+  udp_fw_update.c
+
+noinst_PROGRAMS = \
+	usrp2p_txrx_uhd.elf \
+  usrp2p_blinkenlights.elf \
+  usrp2p_uart_flash_loader.elf
+
+usrp2p_txrx_uhd_elf_SOURCES = \
+	$(top_srcdir)/apps/txrx_uhd.c
+
+usrp2p_blinkenlights_elf_SOURCES = \
+  $(top_srcdir)/apps/blinkenlights.c
+
+usrp2p_uart_flash_loader_elf_SOURCES = \
+  $(top_srcdir)/apps/uart_flash_loader.c