usrp2: common memory map, define slave bases in different headers

4 files changed, 38 insertions, 579 deletions

diff --git a/firmware/zpu/usrp2/CMakeLists.txt b/firmware/zpu/usrp2/CMakeLists.txt
index e54499084..75acae750 100644
--- a/firmware/zpu/usrp2/CMakeLists.txt
+++ b/firmware/zpu/usrp2/CMakeLists.txt
@@ -19,6 +19,8 @@
 INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt)
 INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR})
 
+ADD_DEFINITIONS(-DUSRP2)
+
 ADD_LIBRARY(libusrp2fw STATIC
     ${COMMON_SRCS}
     sd.c
diff --git a/firmware/zpu/usrp2/ethernet.c b/firmware/zpu/usrp2/ethernet.c
index 5d4654bda..9a41eb280 100644
--- a/firmware/zpu/usrp2/ethernet.c
+++ b/firmware/zpu/usrp2/ethernet.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2011 Ettus Research LLC
  * Copyright 2007 Free Software Foundation, Inc.
  *
  * This program is free software: you can redistribute it and/or modify
@@ -18,7 +19,6 @@
 #include "ethernet.h"
 #include "eth_phy.h"
 #include "eth_mac.h"
-#include "eth_mac_regs.h"
 #include "pic.h"
 #include "hal_io.h"
 #include "nonstdio.h"
diff --git a/firmware/zpu/usrp2/memory_map.h b/firmware/zpu/usrp2/memory_map.h
deleted file mode 100644
index 79b11759a..000000000
--- a/firmware/zpu/usrp2/memory_map.h
+++ /dev/null
@@ -1,578 +0,0 @@
-// Copyright 2010-2011 Ettus Research LLC
-/*
- * Copyright 2007,2008,2009 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* Overall Memory Map
- *   0000-7FFF  32K   RAM space (16K on 1500, 24K on 2000, 32K on DSP)
- *   8000-BFFF  16K   Packet Router
- *   C000-FFFF  16K   Peripherals
- */
-
-
-#ifndef INCLUDED_MEMORY_MAP_H
-#define INCLUDED_MEMORY_MAP_H
-
-#include <stdint.h>
-
-
-#define MASTER_CLK_RATE        100000000		// 100 MHz
-
-
-////////////////////////////////////////////////////////////////
-//
-//         Memory map for embedded wishbone bus
-//
-////////////////////////////////////////////////////////////////
-
-
-////////////////////////////////////////////////////////////////
-// Main RAM, Slave 0
-
-#define RAM_BASE 0x0000
-
-////////////////////////////////////////////////////////////////
-// Packet Router RAM, Slave 1
-//
-// The buffers themselves are located in Slave 1, Packet Router RAM.
-// The status registers are in Slave 5, Packet Router Status.
-// The control register is in Slave 7, Settings Bus.
-
-#define ROUTER_RAM_BASE 0x8000
-
-/////////////////////////////////////////////////////
-// SPI Core, Slave 2.  See core docs for more info
-#define SPI_BASE 0xC000   // Base address (16-bit)
-
-typedef struct {
-  volatile uint32_t	txrx0;
-  volatile uint32_t	txrx1;
-  volatile uint32_t	txrx2;
-  volatile uint32_t	txrx3;
-  volatile uint32_t	ctrl;
-  volatile uint32_t	div;
-  volatile uint32_t	ss;
-} spi_regs_t;
-
-#define spi_regs ((spi_regs_t *) SPI_BASE)
-
-
-// Masks for controlling different peripherals
-#define SPI_SS_AD9510    1
-#define SPI_SS_AD9777    2
-#define SPI_SS_RX_DAC    4
-#define SPI_SS_RX_ADC    8
-#define SPI_SS_RX_DB    16
-#define SPI_SS_TX_DAC   32
-#define SPI_SS_TX_ADC   64
-#define SPI_SS_TX_DB   128
-#define SPI_SS_ADS64P44 256
-
-// Masks for different parts of CTRL reg
-#define SPI_CTRL_ASS      (1<<13)
-#define SPI_CTRL_IE       (1<<12)
-#define SPI_CTRL_LSB      (1<<11)
-#define SPI_CTRL_TXNEG    (1<<10)
-#define SPI_CTRL_RXNEG    (1<< 9)
-#define SPI_CTRL_GO_BSY   (1<< 8)
-#define SPI_CTRL_CHAR_LEN_MASK 0x7F
-
-////////////////////////////////////////////////
-// I2C, Slave 3
-// See Wishbone I2C-Master Core Specification.
-
-#define I2C_BASE 0xC400
-
-typedef struct {
-  volatile uint32_t  prescaler_lo;	// r/w
-  volatile uint32_t  prescaler_hi;	// r/w
-  volatile uint32_t  ctrl;		// r/w
-  volatile uint32_t  data;		// wr = transmit reg; rd = receive reg
-  volatile uint32_t  cmd_status;	// wr = command reg;  rd = status reg
-} i2c_regs_t;
-
-#define i2c_regs ((i2c_regs_t *) I2C_BASE)
-
-#define	I2C_CTRL_EN	(1 << 7)	// core enable
-#define	I2C_CTRL_IE	(1 << 6)	// interrupt enable
-
-//
-// STA, STO, RD, WR, and IACK bits are cleared automatically
-//
-#define	I2C_CMD_START	(1 << 7)	// generate (repeated) start condition
-#define I2C_CMD_STOP	(1 << 6)	// generate stop condition
-#define	I2C_CMD_RD	(1 << 5)	// read from slave
-#define I2C_CMD_WR	(1 << 4)	// write to slave
-#define	I2C_CMD_NACK	(1 << 3)	// when a rcvr, send ACK (ACK=0) or NACK (ACK=1)
-#define I2C_CMD_RSVD_2	(1 << 2)	// reserved
-#define	I2C_CMD_RSVD_1	(1 << 1)	// reserved
-#define I2C_CMD_IACK	(1 << 0)	// set to clear pending interrupt
-
-#define I2C_ST_RXACK	(1 << 7)	// Received acknowledgement from slave (1 = NAK, 0 = ACK)
-#define	I2C_ST_BUSY	(1 << 6)	// 1 after START signal detected; 0 after STOP signal detected
-#define	I2C_ST_AL	(1 << 5)	// Arbitration lost.  1 when core lost arbitration
-#define	I2C_ST_RSVD_4	(1 << 4)	// reserved
-#define	I2C_ST_RSVD_3	(1 << 3)	// reserved
-#define	I2C_ST_RSVD_2	(1 << 2)	// reserved
-#define I2C_ST_TIP	(1 << 1)	// Transfer-in-progress
-#define	I2C_ST_IP	(1 << 0)	// Interrupt pending
-
-
-////////////////////////////////////////////////
-// GPIO, Slave 4
-//
-// These go to the daughterboard i/o pins
-
-#define GPIO_BASE 0xC800
-
-typedef struct {
-  volatile uint32_t	io;	  // tx data in high 16, rx in low 16
-  volatile uint32_t     ddr;      // 32 bits, 1 means output. tx in high 16, rx in low 16
-  volatile uint32_t	tx_sel;   // 16 2-bit fields select which source goes to TX DB
-  volatile uint32_t	rx_sel;   // 16 2-bit fields select which source goes to RX DB
-} gpio_regs_t;
-
-// each 2-bit sel field is layed out this way
-#define GPIO_SEL_SW	   0 // if pin is an output, set by software in the io reg
-#define	GPIO_SEL_ATR	   1 // if pin is an output, set by ATR logic
-#define	GPIO_SEL_DEBUG_0   2 // if pin is an output, debug lines from FPGA fabric
-#define	GPIO_SEL_DEBUG_1   3 // if pin is an output, debug lines from FPGA fabric
-
-#define gpio_base ((gpio_regs_t *) GPIO_BASE)
-
-///////////////////////////////////////////////////
-// Packet Router Status, Slave 5
-//
-// The buffers themselves are located in Slave 1, Packet Router RAM.
-// The status registers are in Slave 5, Packet Router Status.
-// The control register is in Slave 7, Settings Bus.
-
-#define ROUTER_STATUS_BASE 0xCC00
-
-typedef struct {
-  volatile uint32_t _padding[8];
-  volatile uint32_t status;
-  volatile uint32_t hw_config;	         // see below
-  volatile uint32_t time64_secs_rb;
-  volatile uint32_t time64_ticks_rb;
-  volatile uint32_t compat_num;
-  volatile uint32_t irqs;
-} router_status_t;
-
-#define router_status ((router_status_t *) ROUTER_STATUS_BASE)
-
-// The hw_config register
-
-#define	HWC_SIMULATION		0x80000000
-#define	HWC_WB_CLK_DIV_MASK	0x0000000f
-
-/*!
- * \brief return non-zero if we're running under the simulator
- */
-inline static int
-hwconfig_simulation_p(void)
-{
-  return router_status->hw_config & HWC_SIMULATION;
-}
-
-/*!
- * \brief Return Wishbone Clock divisor.
- * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor.
- */
-inline static int
-hwconfig_wishbone_divisor(void)
-{
-  return router_status->hw_config & HWC_WB_CLK_DIV_MASK;
-}
-
-///////////////////////////////////////////////////
-// Ethernet Core, Slave 6
-
-#define ETH_BASE 0xD000
-
-#include "eth_mac_regs.h"
-
-#define eth_mac ((eth_mac_regs_t *) ETH_BASE)
-
-////////////////////////////////////////////////////
-// Settings Bus, Slave #7, Not Byte Addressable!
-//
-// Output-only from processor point-of-view.
-// 1KB of address space (== 256 32-bit write-only regs)
-
-
-#define MISC_OUTPUT_BASE        0xD400
-#define	TX_PROTOCOL_ENGINE_BASE 0xD480
-#define	RX_PROTOCOL_ENGINE_BASE 0xD4C0
-#define ROUTER_CTRL_BASE   0xD500
-#define LAST_SETTING_REG        0xD7FC	// last valid setting register
-
-#define SR_MISC 0
-#define SR_TX_PROT_ENG 32
-#define SR_RX_PROT_ENG 48
-#define SR_ROUTER_CTRL 64
-#define SR_UDP_SM 96
-#define SR_TX_DSP 208
-#define SR_TX_CTRL 224
-#define SR_RX_DSP0 160
-#define SR_RX_DSP1 240
-#define SR_RX_CTRL0 176
-#define SR_RX_CTRL1 32
-#define SR_TIME64 192
-#define SR_SIMTIMER 198
-#define SR_LAST 255
-
-#define	_SR_ADDR(sr)	(MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t))
-
-// --- packet router control regs ---
-
-typedef struct {
-  volatile uint32_t mode_ctrl;
-  volatile uint32_t ip_addr;
-  volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16)
-  volatile uint32_t iface_ctrl;
-} router_ctrl_t;
-
-#define router_ctrl ((router_ctrl_t *) ROUTER_CTRL_BASE)
-
-// --- misc outputs ---
-
-typedef struct {
-  volatile uint32_t	clk_ctrl;
-  volatile uint32_t	serdes_ctrl;
-  volatile uint32_t	adc_ctrl;
-  volatile uint32_t	leds;
-  volatile uint32_t	phy_ctrl;	// LSB is reset line to eth phy
-  volatile uint32_t	debug_mux_ctrl;
-  volatile uint32_t     ram_page;       // FIXME should go somewhere else...
-  volatile uint32_t     flush_icache;   // Flush the icache
-  volatile uint32_t     led_src;        // HW or SW control for LEDs
-} output_regs_t;
-
-#define CLK_RESET  (1<<4)
-#define CLK_ENABLE (1<<3) | (1<<2)
-#define CLK_SEL    (1<<1) | (1<<0)
-
-#define SERDES_ENABLE 8
-#define SERDES_PRBSEN 4
-#define SERDES_LOOPEN 2
-#define SERDES_RXEN   1
-
-#define	ADC_CTRL_ON	0x0F
-#define	ADC_CTRL_OFF	0x00
-
-// crazy order that matches the labels on the case
-
-#define	LED_A		(1 << 4)
-#define	LED_B		(1 << 1)
-#define	LED_C		(1 << 3)
-#define	LED_D		(1 << 0)
-#define	LED_E		(1 << 2)
-//      LED_F		// controlled by CPLD
-#define	LED_RJ45	(1 << 5)
-
-#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE)
-
-// --- udp tx regs ---
-
-typedef struct {
-  // Bits 19:16 are control info; bits 15:0 are data (see below)
-  // First two words are unused.
-  volatile uint32_t _nope[2];
-  //--- ethernet header - 14 bytes---
-  volatile struct{
-    uint32_t mac_dst_0_1; //word 2
-    uint32_t mac_dst_2_3;
-    uint32_t mac_dst_4_5;
-    uint32_t mac_src_0_1;
-    uint32_t mac_src_2_3;
-    uint32_t mac_src_4_5;
-    uint32_t ether_type; //word 8
-  } eth_hdr;
-  //--- ip header - 20 bytes ---
-  volatile struct{
-    uint32_t ver_ihl_tos; //word 9
-    uint32_t total_length;
-    uint32_t identification;
-    uint32_t flags_frag_off;
-    uint32_t ttl_proto;
-    uint32_t checksum;
-    uint32_t src_addr_high;
-    uint32_t src_addr_low;
-    uint32_t dst_addr_high;
-    uint32_t dst_addr_low; //word 18
-  } ip_hdr;
-  //--- udp header - 8 bytes ---
-  volatile struct{
-    uint32_t src_port; //word 19
-    uint32_t dst_port;
-    uint32_t length;
-    uint32_t checksum; //word 22
-  } udp_hdr;
-  volatile uint32_t _pad[1];
-  volatile uint32_t dsp0_port;
-  volatile uint32_t err0_port;
-  volatile uint32_t dsp1_port;
-  volatile uint32_t err1_port;
-} sr_udp_sm_t;
-
-// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive)
-
-// Insert a UDP source port from the table
-#define UDP_SM_INS_UDP_SRC_PORT     (1 << 21)
-
-// Insert a UDP dest port from the table
-#define UDP_SM_INS_UDP_DST_PORT     (1 << 20)
-
-// This is the last word of the header
-#define	UDP_SM_LAST_WORD		(1 << 19)
-
-// Insert IP header checksum here.  Data is the xor of 16'hFFFF and
-// the values written into regs 9-13 and 15-18.
-#define	UDP_SM_INS_IP_HDR_CHKSUM	(1 << 18)
-
-// Insert IP Length here (data ignored)
-#define	UDP_SM_INS_IP_LEN		(1 << 17)
-
-// Insert UDP Length here (data ignore)
-#define	UDP_SM_INS_UDP_LEN		(1 << 16)
-
-#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM))
-
-// --- VITA TX CTRL regs ---
-
-typedef struct {
-  volatile uint32_t     num_chan;
-  volatile uint32_t     clear_state;	// clears out state machine, fifos,
-  volatile uint32_t     report_sid;
-  volatile uint32_t     policy;
-  volatile uint32_t     cyc_per_up;
-  volatile uint32_t     packets_per_up;
-} sr_tx_ctrl_t;
-
-#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL))
-
-// --- VITA RX CTRL regs ---
-typedef struct {
-  // The following 3 are logically a single command register.
-  // They are clocked into the underlying fifo when time_ticks is written.
-  volatile uint32_t	cmd;		// {now, chain, num_samples(30)
-  volatile uint32_t	time_secs;
-  volatile uint32_t	time_ticks;
-} sr_rx_ctrl_t;
-
-#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0))
-#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1))
-
-// ----------------------------------------------------------------
-// VITA49 64 bit time (write only)
-  /*!
-   * \brief Time 64 flags
-   *
-   * <pre>
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-----------------------------------------------------------+-+-+
-   * |                                                           |S|P|
-   * +-----------------------------------------------------------+-+-+
-   *
-   * P - PPS edge selection (0=negedge, 1=posedge, default=0)
-   * S - Source (0=sma, 1=mimo, 0=default)
-   *
-   * </pre>
-   */
-typedef struct {
-  volatile uint32_t	secs;	// value to set absolute secs to on next PPS
-  volatile uint32_t	ticks;	// value to set absolute ticks to on next PPS
-  volatile uint32_t flags;  // flags - see chart above
-  volatile uint32_t imm;    // set immediate (0=latch on next pps, 1=latch immediate, default=0)
-} sr_time64_t;
-
-#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64))
-
-
-/* 
- * --- ethernet tx protocol engine regs (write only) ---
- *
- * These registers control the transmit portion of the ethernet
- * protocol engine (out of USRP2).  The protocol engine handles fifo
- * status and sequence number insertion in outgoing packets, and
- * automagically generates status packets when required to inform the
- * host of changes in fifo availability.
- *
- * All outgoing packets have their fifo_status field set to the number
- * of 32-bit lines of fifo available in the ethernet Rx fifo (see
- * usrp2_eth_packet.h).  Seqno's are set if FIXME, else 0.
- *
- * FIXME clean this up once we know how it's supposed to behave.
- */
-
-typedef struct {
-  volatile uint32_t  flags;	     // not yet fully defined (channel?)
-  volatile uint32_t  mac_dst0123;    // 4 bytes of destination mac addr
-  volatile uint32_t  mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr
-  volatile uint32_t  mac_src2345;    // 4 bytes of destination mac addr
-  volatile uint32_t  seqno;	     // Write to init seqno.  It autoincs on match
-} tx_proto_engine_regs_t;
-
-#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE)
-
-/*
- * --- ethernet rx protocol engine regs (write only) ---
- *
- * These registers control the receive portion of the ethernet
- * protocol engine (into USRP2).  The protocol engine offloads common
- * packet inspection operations so that firmware has less to do on
- * "fast path" packets.
- *
- * The registers define conditions which must be matched for a packet
- * to be considered a "fast path" packet.  If a received packet
- * matches the src and dst mac address, ethertype, flags field, and
- * expected seqno number it is considered a "fast path" packet, and
- * the expected seqno is updated.  If the packet fails to satisfy any
- * of the above conditions it's a "slow path" packet, and the
- * corresponding SLOWPATH flag will be set buffer_status register.
- */
-
-typedef struct {
-  volatile uint32_t  flags;	     // not yet fully defined (channel?)
-  volatile uint32_t  mac_dst0123;    // 4 bytes of destination mac addr
-  volatile uint32_t  mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr
-  volatile uint32_t  mac_src2345;    // 4 bytes of destination mac addr
-  volatile uint32_t  ethertype_pad;  // ethertype in high 16-bits
-} rx_proto_engine_regs_t;
-
-#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE)
-
-
-
-///////////////////////////////////////////////////
-// Simple Programmable Interrupt Controller, Slave 8
-
-#define PIC_BASE  0xD800
-
-// Interrupt request lines
-// Bit numbers (LSB == 0) that correpond to interrupts into PIC
-
-#define	IRQ_BUFFER	0	// buffer manager
-#define	IRQ_ONETIME	1
-#define	IRQ_SPI		2
-#define	IRQ_I2C		3
-#define	IRQ_PHY		4	// ethernet PHY
-#define	IRQ_UNDERRUN	5
-#define	IRQ_OVERRUN	6
-#define	IRQ_PPS		7	// pulse per second
-#define	IRQ_UART_RX	8
-#define	IRQ_UART_TX	9
-#define	IRQ_SERDES	10
-#define	IRQ_CLKSTATUS	11
-#define IRQ_PERIODIC    12
-
-#define IRQ_TO_MASK(x) (1 << (x))
-
-#define PIC_BUFFER_INT    IRQ_TO_MASK(IRQ_BUFFER)
-#define PIC_ONETIME_INT   IRQ_TO_MASK(IRQ_ONETIME)
-#define PIC_SPI_INT       IRQ_TO_MASK(IRQ_SPI)
-#define PIC_I2C_INT       IRQ_TO_MASK(IRQ_I2C)
-#define PIC_PHY_INT       IRQ_TO_MASK(IRQ_PHY)
-#define PIC_UNDERRUN_INT  IRQ_TO_MASK(IRQ_UNDERRUN)
-#define PIC_OVERRUN_INT   IRQ_TO_MASK(IRQ_OVERRUN)
-#define PIC_PPS_INT   	  IRQ_TO_MASK(IRQ_PPS)
-#define PIC_UART_RX_INT   IRQ_TO_MASK(IRQ_UART_RX)
-#define PIC_UART_TX_INT   IRQ_TO_MASK(IRQ_UART_TX)
-#define PIC_SERDES        IRQ_TO_MASK(IRQ_SERDES)
-#define PIC_CLKSTATUS     IRQ_TO_MASK(IRQ_CLKSTATUS)
-
-typedef struct {
-  volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level
-  volatile uint32_t polarity;	 // mask: 1 -> rising edge
-  volatile uint32_t mask;	 // mask: 1 -> disabled
-  volatile uint32_t pending;	 // mask: 1 -> pending; write 1's to clear pending ints
-} pic_regs_t;
-
-#define pic_regs ((pic_regs_t *) PIC_BASE)
-
-// ----------------------------------------------------------------
-// WB_CLK_RATE is the time base for this
-typedef struct {
-  volatile uint32_t	onetime;   // Number of wb clk cycles till the onetime interrupt
-  volatile uint32_t	periodic;  // Repeat rate of periodic interrupt
-} sr_simple_timer_t;
-
-#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER))
-
-///////////////////////////////////////////////////
-// UART, Slave 10
-
-#define UART_BASE  0xE000
-
-typedef struct {
-  //  All elements are 8 bits except for clkdiv (16), but we use uint32 to make 
-  //    the hardware for decoding easier
-  volatile uint32_t clkdiv;  // Set to 50e6 divided by baud rate (no x16 factor)
-  volatile uint32_t txlevel; // Number of spaces in the FIFO for writes
-  volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads
-  volatile uint32_t txchar;  // Write characters to be sent here
-  volatile uint32_t rxchar;  // Read received characters here
-} uart_regs_t;
-
-#define uart_regs ((uart_regs_t *) UART_BASE)
-
-///////////////////////////////////////////////////
-// ATR Controller, Slave 11
-
-#define ATR_BASE  0xE400
-
-typedef struct {
-  volatile uint32_t	v[16];
-} atr_regs_t;
-
-#define	ATR_IDLE	0x0	// indicies into v
-#define ATR_TX		0x1
-#define	ATR_RX		0x2
-#define	ATR_FULL	0x3
-
-#define atr_regs ((atr_regs_t *) ATR_BASE)
-
-///////////////////////////////////////////////////
-// SD Card SPI interface, Slave 13
-//   All regs are 8 bits wide, but are accessed as if they are 32 bits
-
-#define SDSPI_BASE  0xEC00
-
-typedef struct {
-  volatile uint32_t status;  // Write a 1 or 0 for controlling CS
-  volatile uint32_t clkdiv;
-  volatile uint32_t send_dat;
-  volatile uint32_t receive_dat;
-} sdspi_regs_t;
-
-#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE)
-
-///////////////////////////////////////////////////
-// External RAM interface, Slave 14
-//   Pages are 1K.  Page is 10 bits, set by a control register
-//    output_regs->ram_page
-
-#define EXTRAM_BASE 0xF000
-#define extram ((volatile uint32_t *) EXTRAM_BASE)
-
-
-///////////////////////////////////////////////////
-
-#endif
-
diff --git a/firmware/zpu/usrp2/slave_base.h b/firmware/zpu/usrp2/slave_base.h
new file mode 100644
index 000000000..e990d54f7
--- /dev/null
+++ b/firmware/zpu/usrp2/slave_base.h
@@ -0,0 +1,35 @@
+//
+// Copyright 2011 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+#ifndef INCLUDED_SLAVE_BASE_H
+#define INCLUDED_SLAVE_BASE_H
+
+#define RAM_BASE 0x0000
+#define ROUTER_RAM_BASE 0x8000
+#define SPI_BASE 0xC000
+#define I2C_BASE 0xC400
+#define GPIO_BASE 0xC800
+#define ROUTER_STATUS_BASE 0xCC00
+#define ETH_BASE 0xD000
+#define MISC_OUTPUT_BASE 0xD400
+#define PIC_BASE  0xD800
+#define UART_BASE  0xE000
+#define ATR_BASE  0xE400
+#define SDSPI_BASE  0xEC00
+
+#endif
+