usrp2: common memory map, define slave bases in different headers

2 files changed, 496 insertions, 62 deletions

diff --git a/firmware/zpu/lib/eth_mac_regs.h b/firmware/zpu/lib/eth_mac_regs.h
deleted file mode 100644
index d680f8de0..000000000
--- a/firmware/zpu/lib/eth_mac_regs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_ETH_MAC_REGS_H
-#define INCLUDED_ETH_MAC_REGS_H
-
-/*
- * Simple GEMAC
- *
- */
-typedef struct {
-  volatile int settings;
-  volatile int ucast_hi;
-  volatile int ucast_lo;
-  volatile int mcast_hi;
-  volatile int mcast_lo;
-  volatile int miimoder;
-  volatile int miiaddress;
-  volatile int miitx_data;
-  volatile int miicommand;
-  volatile int miistatus;
-  volatile int miirx_data;
-  volatile int pause_time;
-  volatile int pause_thresh;
-} eth_mac_regs_t;
-
-// settings register
-#define MAC_SET_PAUSE_EN  (1 << 0)   // Makes us respect received pause frames (normally on)
-#define MAC_SET_PASS_ALL  (1 << 1)   // Enables promiscuous mode, currently broken
-#define MAC_SET_PASS_PAUSE (1 << 2)  // Sends pause frames through (normally off)
-#define MAC_SET_PASS_BCAST (1 << 3)  // Sends broadcast frames through (normally on)
-#define MAC_SET_PASS_MCAST (1 << 4)  // Sends multicast frames that match mcast addr (normally off)
-#define MAC_SET_PASS_UCAST (1 << 5)  // Sends unicast (normal) frames through if they hit in address filter (normally on)
-#define MAC_SET_PAUSE_SEND_EN (1 << 6) // Enables sending pause frames
-
-// miicommand register
-#define MIIC_SCANSSTAT	(1 << 0)	// Scan status
-#define MIIC_RSTAT      (1 << 1)	// Read status
-#define	MIIC_WCTRLDATA	(1 << 2)	// Write control data
-
-// miistatus register
-#define MIIS_LINKFAIL	(1 << 0)	// The link failed
-#define	MIIS_BUSY	(1 << 1)	// The MII is busy (operation in progress)
-#define	MIIS_NVALID	(1 << 2)	// The data in the status register is invalid
-					//   This it is only valid when the scan status is active.
-
-#endif /* INCLUDED_ETH_MAC_REGS_H */
diff --git a/firmware/zpu/lib/memory_map.h b/firmware/zpu/lib/memory_map.h
new file mode 100644
index 000000000..e08136053
--- /dev/null
+++ b/firmware/zpu/lib/memory_map.h
@@ -0,0 +1,496 @@
+// Copyright 2010-2011 Ettus Research LLC
+/*
+ * Copyright 2007,2008,2009 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef INCLUDED_MEMORY_MAP_H
+#define INCLUDED_MEMORY_MAP_H
+
+#include "slave_base.h"
+#include <stdint.h>
+
+#define MASTER_CLK_RATE 100000000 // 100 MHz
+
+/////////////////////////////////////////////////////
+// SPI Core, Slave 2.  See core docs for more info
+/////////////////////////////////////////////////////
+
+typedef struct {
+  volatile uint32_t	txrx0;
+  volatile uint32_t	txrx1;
+  volatile uint32_t	txrx2;
+  volatile uint32_t	txrx3;
+  volatile uint32_t	ctrl;
+  volatile uint32_t	div;
+  volatile uint32_t	ss;
+} spi_regs_t;
+
+#define spi_regs ((spi_regs_t *) SPI_BASE)
+
+// Masks for controlling different peripherals
+#define SPI_SS_AD9510    1
+#define SPI_SS_AD9777    2
+#define SPI_SS_RX_DAC    4
+#define SPI_SS_RX_ADC    8
+#define SPI_SS_RX_DB    16
+#define SPI_SS_TX_DAC   32
+#define SPI_SS_TX_ADC   64
+#define SPI_SS_TX_DB   128
+#define SPI_SS_ADS62P44 256
+
+// Masks for different parts of CTRL reg
+#define SPI_CTRL_ASS      (1<<13)
+#define SPI_CTRL_IE       (1<<12)
+#define SPI_CTRL_LSB      (1<<11)
+#define SPI_CTRL_TXNEG    (1<<10)
+#define SPI_CTRL_RXNEG    (1<< 9)
+#define SPI_CTRL_GO_BSY   (1<< 8)
+#define SPI_CTRL_CHAR_LEN_MASK 0x7F
+
+////////////////////////////////////////////////
+// I2C, Slave 3
+////////////////////////////////////////////////
+
+typedef struct {
+  volatile uint32_t  prescaler_lo;	// r/w
+  volatile uint32_t  prescaler_hi;	// r/w
+  volatile uint32_t  ctrl;		// r/w
+  volatile uint32_t  data;		// wr = transmit reg; rd = receive reg
+  volatile uint32_t  cmd_status;	// wr = command reg;  rd = status reg
+} i2c_regs_t;
+
+#define i2c_regs ((i2c_regs_t *) I2C_BASE)
+
+#define	I2C_CTRL_EN	(1 << 7)	// core enable
+#define	I2C_CTRL_IE	(1 << 6)	// interrupt enable
+
+//
+// STA, STO, RD, WR, and IACK bits are cleared automatically
+//
+#define	I2C_CMD_START	(1 << 7)	// generate (repeated) start condition
+#define I2C_CMD_STOP	(1 << 6)	// generate stop condition
+#define	I2C_CMD_RD	(1 << 5)	// read from slave
+#define I2C_CMD_WR	(1 << 4)	// write to slave
+#define	I2C_CMD_NACK	(1 << 3)	// when a rcvr, send ACK (ACK=0) or NACK (ACK=1)
+#define I2C_CMD_RSVD_2	(1 << 2)	// reserved
+#define	I2C_CMD_RSVD_1	(1 << 1)	// reserved
+#define I2C_CMD_IACK	(1 << 0)	// set to clear pending interrupt
+
+#define I2C_ST_RXACK	(1 << 7)	// Received acknowledgement from slave (1 = NAK, 0 = ACK)
+#define	I2C_ST_BUSY	(1 << 6)	// 1 after START signal detected; 0 after STOP signal detected
+#define	I2C_ST_AL	(1 << 5)	// Arbitration lost.  1 when core lost arbitration
+#define	I2C_ST_RSVD_4	(1 << 4)	// reserved
+#define	I2C_ST_RSVD_3	(1 << 3)	// reserved
+#define	I2C_ST_RSVD_2	(1 << 2)	// reserved
+#define I2C_ST_TIP	(1 << 1)	// Transfer-in-progress
+#define	I2C_ST_IP	(1 << 0)	// Interrupt pending
+
+///////////////////////////////////////////////////
+// Packet Router Status, Slave 5
+///////////////////////////////////////////////////
+
+typedef struct {
+  volatile uint32_t _padding[8];
+  volatile uint32_t status;
+  volatile uint32_t hw_config;	         // see below
+  volatile uint32_t time64_secs_rb;
+  volatile uint32_t time64_ticks_rb;
+  volatile uint32_t compat_num;
+  volatile uint32_t irqs;
+} router_status_t;
+
+#define router_status ((router_status_t *) ROUTER_STATUS_BASE)
+
+// The hw_config register
+
+#define	HWC_SIMULATION		0x80000000
+#define	HWC_WB_CLK_DIV_MASK	0x0000000f
+
+/*!
+ * \brief return non-zero if we're running under the simulator
+ */
+inline static int
+hwconfig_simulation_p(void)
+{
+  return router_status->hw_config & HWC_SIMULATION;
+}
+
+/*!
+ * \brief Return Wishbone Clock divisor.
+ * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor.
+ */
+inline static int
+hwconfig_wishbone_divisor(void)
+{
+  return router_status->hw_config & HWC_WB_CLK_DIV_MASK;
+}
+
+///////////////////////////////////////////////////
+// Ethernet Core, Slave 6
+///////////////////////////////////////////////////
+
+typedef struct {
+  volatile int settings;
+  volatile int ucast_hi;
+  volatile int ucast_lo;
+  volatile int mcast_hi;
+  volatile int mcast_lo;
+  volatile int miimoder;
+  volatile int miiaddress;
+  volatile int miitx_data;
+  volatile int miicommand;
+  volatile int miistatus;
+  volatile int miirx_data;
+  volatile int pause_time;
+  volatile int pause_thresh;
+} eth_mac_regs_t;
+
+// settings register
+#define MAC_SET_PAUSE_EN  (1 << 0)   // Makes us respect received pause frames (normally on)
+#define MAC_SET_PASS_ALL  (1 << 1)   // Enables promiscuous mode, currently broken
+#define MAC_SET_PASS_PAUSE (1 << 2)  // Sends pause frames through (normally off)
+#define MAC_SET_PASS_BCAST (1 << 3)  // Sends broadcast frames through (normally on)
+#define MAC_SET_PASS_MCAST (1 << 4)  // Sends multicast frames that match mcast addr (normally off)
+#define MAC_SET_PASS_UCAST (1 << 5)  // Sends unicast (normal) frames through if they hit in address filter (normally on)
+#define MAC_SET_PAUSE_SEND_EN (1 << 6) // Enables sending pause frames
+
+// miicommand register
+#define MIIC_SCANSSTAT	(1 << 0)	// Scan status
+#define MIIC_RSTAT      (1 << 1)	// Read status
+#define	MIIC_WCTRLDATA	(1 << 2)	// Write control data
+
+// miistatus register
+#define MIIS_LINKFAIL	(1 << 0)	// The link failed
+#define	MIIS_BUSY	(1 << 1)	// The MII is busy (operation in progress)
+#define	MIIS_NVALID	(1 << 2)	// The data in the status register is invalid
+					//   This it is only valid when the scan status is active.
+
+#define eth_mac ((eth_mac_regs_t *) ETH_BASE)
+
+////////////////////////////////////////////////////
+// Settings Bus, Slave #7, Not Byte Addressable!
+//
+// Output-only from processor point-of-view.
+// 1KB of address space (== 256 32-bit write-only regs)
+////////////////////////////////////////////////////
+
+#define SR_MISC 0
+#define SR_TX_PROT_ENG 32
+#define SR_RX_PROT_ENG 48
+#define SR_ROUTER_CTRL 64
+#define SR_UDP_SM 96
+#define SR_TX_DSP 208
+#define SR_TX_CTRL 224
+#define SR_RX_DSP0 160
+#define SR_RX_DSP1 240
+#define SR_RX_CTRL0 176
+#define SR_RX_CTRL1 32
+#define SR_TIME64 192
+#define SR_SIMTIMER 198
+#define SR_LAST 255
+
+#define	_SR_ADDR(sr)	(MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t))
+
+#define SR_ADDR_BLDRDONE _SR_ADDR(5)
+
+// --- packet router control regs ---
+
+typedef struct {
+  volatile uint32_t mode_ctrl;
+  volatile uint32_t ip_addr;
+  volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16)
+  volatile uint32_t iface_ctrl;
+} router_ctrl_t;
+
+#define router_ctrl ((router_ctrl_t *) _SR_ADDR(SR_ROUTER_CTRL))
+
+// --- misc outputs ---
+
+typedef struct {
+  volatile uint32_t	clk_ctrl;
+  volatile uint32_t	serdes_ctrl;
+  volatile uint32_t	adc_ctrl;
+  volatile uint32_t	leds;
+  volatile uint32_t	phy_ctrl;	// LSB is reset line to eth phy
+  volatile uint32_t	debug_mux_ctrl;
+  volatile uint32_t     ram_page;       // FIXME should go somewhere else...
+  volatile uint32_t     flush_icache;   // Flush the icache
+  volatile uint32_t     led_src;        // HW or SW control for LEDs
+} output_regs_t;
+
+#define CLK_RESET  (1<<4)
+#define CLK_ENABLE (1<<3) | (1<<2)
+#define CLK_SEL    (1<<1) | (1<<0)
+
+#define SERDES_ENABLE 8
+#define SERDES_PRBSEN 4
+#define SERDES_LOOPEN 2
+#define SERDES_RXEN   1
+
+#define	ADC_CTRL_ON	0x0F
+#define	ADC_CTRL_OFF	0x00
+
+// crazy order that matches the labels on the case
+
+#define	LED_A		(1 << 4)
+#define	LED_B		(1 << 1)
+#define	LED_E		(1 << 2)
+#define	LED_D		(1 << 0)
+#define	LED_C		(1 << 3)
+//      LED_F		// controlled by CPLD
+#define	LED_RJ45	(1 << 5)
+
+#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE)
+
+// --- udp tx regs ---
+
+typedef struct {
+  // Bits 19:16 are control info; bits 15:0 are data (see below)
+  // First two words are unused.
+  volatile uint32_t _nope[2];
+  //--- ethernet header - 14 bytes---
+  volatile struct{
+    uint32_t mac_dst_0_1; //word 2
+    uint32_t mac_dst_2_3;
+    uint32_t mac_dst_4_5;
+    uint32_t mac_src_0_1;
+    uint32_t mac_src_2_3;
+    uint32_t mac_src_4_5;
+    uint32_t ether_type; //word 8
+  } eth_hdr;
+  //--- ip header - 20 bytes ---
+  volatile struct{
+    uint32_t ver_ihl_tos; //word 9
+    uint32_t total_length;
+    uint32_t identification;
+    uint32_t flags_frag_off;
+    uint32_t ttl_proto;
+    uint32_t checksum;
+    uint32_t src_addr_high;
+    uint32_t src_addr_low;
+    uint32_t dst_addr_high;
+    uint32_t dst_addr_low; //word 18
+  } ip_hdr;
+  //--- udp header - 8 bytes ---
+  volatile struct{
+    uint32_t src_port; //word 19
+    uint32_t dst_port;
+    uint32_t length;
+    uint32_t checksum; //word 22
+  } udp_hdr;
+  volatile uint32_t _pad[1];
+  volatile uint32_t dsp0_port;
+  volatile uint32_t err0_port;
+  volatile uint32_t dsp1_port;
+  volatile uint32_t err1_port;
+} sr_udp_sm_t;
+
+// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive)
+
+// Insert a UDP source port from the table
+#define UDP_SM_INS_UDP_SRC_PORT     (1 << 21)
+
+// Insert a UDP dest port from the table
+#define UDP_SM_INS_UDP_DST_PORT     (1 << 20)
+
+// This is the last word of the header
+#define	UDP_SM_LAST_WORD		(1 << 19)
+
+// Insert IP header checksum here.  Data is the xor of 16'hFFFF and
+// the values written into regs 9-13 and 15-18.
+#define	UDP_SM_INS_IP_HDR_CHKSUM	(1 << 18)
+
+// Insert IP Length here (data ignored)
+#define	UDP_SM_INS_IP_LEN		(1 << 17)
+
+// Insert UDP Length here (data ignore)
+#define	UDP_SM_INS_UDP_LEN		(1 << 16)
+
+#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM))
+
+// --- VITA TX CTRL regs ---
+
+typedef struct {
+  volatile uint32_t     num_chan;
+  volatile uint32_t     clear_state;	// clears out state machine, fifos,
+  volatile uint32_t     report_sid;
+  volatile uint32_t     policy;
+  volatile uint32_t     cyc_per_up;
+  volatile uint32_t     packets_per_up;
+} sr_tx_ctrl_t;
+
+#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL))
+
+// --- VITA RX CTRL regs ---
+typedef struct {
+  // The following 3 are logically a single command register.
+  // They are clocked into the underlying fifo when time_ticks is written.
+  volatile uint32_t	cmd;		// {now, chain, num_samples(30)
+  volatile uint32_t	time_secs;
+  volatile uint32_t	time_ticks;
+} sr_rx_ctrl_t;
+
+#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0))
+#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1))
+
+// ----------------------------------------------------------------
+// VITA49 64 bit time (write only)
+  /*!
+   * \brief Time 64 flags
+   *
+   * <pre>
+   *
+   *    3                   2                   1                       
+   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+   * +-----------------------------------------------------------+-+-+
+   * |                                                           |S|P|
+   * +-----------------------------------------------------------+-+-+
+   *
+   * P - PPS edge selection (0=negedge, 1=posedge, default=0)
+   * S - Source (0=sma, 1=mimo, 0=default)
+   *
+   * </pre>
+   */
+typedef struct {
+  volatile uint32_t	secs;	// value to set absolute secs to on next PPS
+  volatile uint32_t	ticks;	// value to set absolute ticks to on next PPS
+  volatile uint32_t flags;  // flags - see chart above
+  volatile uint32_t imm;    // set immediate (0=latch on next pps, 1=latch immediate, default=0)
+} sr_time64_t;
+
+#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64))
+
+///////////////////////////////////////////////////////
+// Simple Programmable Interrupt Controller, Slave 8
+///////////////////////////////////////////////////////
+
+// Interrupt request lines
+// Bit numbers (LSB == 0) that correpond to interrupts into PIC
+
+#define	IRQ_BUFFER	0	// buffer manager
+#define	IRQ_ONETIME	1
+#define	IRQ_SPI		2
+#define	IRQ_I2C		3
+#define	IRQ_PHY		4	// ethernet PHY
+#define	IRQ_UNDERRUN	5
+#define	IRQ_OVERRUN	6
+#define	IRQ_PPS		7	// pulse per second
+#define	IRQ_UART_RX	8
+#define	IRQ_UART_TX	9
+#define	IRQ_SERDES	10
+#define	IRQ_CLKSTATUS	11
+#define IRQ_PERIODIC    12
+#define IRQ_BUTTON	13
+
+#define IRQ_TO_MASK(x) (1 << (x))
+
+#define PIC_BUFFER_INT    IRQ_TO_MASK(IRQ_BUFFER)
+#define PIC_ONETIME_INT   IRQ_TO_MASK(IRQ_ONETIME)
+#define PIC_SPI_INT       IRQ_TO_MASK(IRQ_SPI)
+#define PIC_I2C_INT       IRQ_TO_MASK(IRQ_I2C)
+#define PIC_PHY_INT       IRQ_TO_MASK(IRQ_PHY)
+#define PIC_UNDERRUN_INT  IRQ_TO_MASK(IRQ_UNDERRUN)
+#define PIC_OVERRUN_INT   IRQ_TO_MASK(IRQ_OVERRUN)
+#define PIC_PPS_INT   	  IRQ_TO_MASK(IRQ_PPS)
+#define PIC_UART_RX_INT   IRQ_TO_MASK(IRQ_UART_RX)
+#define PIC_UART_TX_INT   IRQ_TO_MASK(IRQ_UART_TX)
+#define PIC_SERDES        IRQ_TO_MASK(IRQ_SERDES)
+#define PIC_CLKSTATUS     IRQ_TO_MASK(IRQ_CLKSTATUS)
+#define PIC_BUTTON				IRQ_TO_MASK(IRQ_BUTTON)
+
+typedef struct {
+  volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level
+  volatile uint32_t polarity;	 // mask: 1 -> rising edge
+  volatile uint32_t mask;	 // mask: 1 -> disabled
+  volatile uint32_t pending;	 // mask: 1 -> pending; write 1's to clear pending ints
+} pic_regs_t;
+
+#define pic_regs ((pic_regs_t *) PIC_BASE)
+
+// ----------------------------------------------------------------
+// WB_CLK_RATE is the time base for this
+typedef struct {
+  volatile uint32_t	onetime;   // Number of wb clk cycles till the onetime interrupt
+  volatile uint32_t	periodic;  // Repeat rate of periodic interrupt
+} sr_simple_timer_t;
+
+#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER))
+
+///////////////////////////////////////////////////
+// UART, Slave 10
+///////////////////////////////////////////////////
+
+typedef struct {
+  //  All elements are 8 bits except for clkdiv (16), but we use uint32 to make 
+  //    the hardware for decoding easier
+  volatile uint32_t clkdiv;  // Set to 50e6 divided by baud rate (no x16 factor)
+  volatile uint32_t txlevel; // Number of spaces in the FIFO for writes
+  volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads
+  volatile uint32_t txchar;  // Write characters to be sent here
+  volatile uint32_t rxchar;  // Read received characters here
+} uart_regs_t;
+
+#define uart_regs ((uart_regs_t *) UART_BASE)
+
+///////////////////////////////////////////////////
+// SD Card SPI interface, Slave 13
+//   All regs are 8 bits wide, but are accessed as if they are 32 bits
+///////////////////////////////////////////////////
+#ifdef USRP2
+
+typedef struct {
+  volatile uint32_t status;  // Write a 1 or 0 for controlling CS
+  volatile uint32_t clkdiv;
+  volatile uint32_t send_dat;
+  volatile uint32_t receive_dat;
+} sdspi_regs_t;
+
+#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE)
+
+#endif //USRP2
+
+///////////////////////////////////////////////////
+// ICAP, Slave 13
+///////////////////////////////////////////////////
+#ifdef USRP2P
+
+typedef struct {
+  uint32_t icap; //only the lower 8 bits matter
+} icap_regs_t;
+
+#define icap_regs ((icap_regs_t *) ICAP_BASE)
+
+///////////////////////////////////////////////////
+// SPI Flash interface, Slave 14
+// Control register definitions are the same as SPI, so use SPI_CTRL_ASS, etc.
+// Peripheral mask not needed since bus is dedicated (CE held low)
+///////////////////////////////////////////////////
+
+typedef struct {
+  volatile uint32_t	txrx0;
+  volatile uint32_t	txrx1;
+  volatile uint32_t	txrx2;
+  volatile uint32_t	txrx3;
+  volatile uint32_t	ctrl;
+  volatile uint32_t	div;
+  volatile uint32_t	ss;
+} spif_regs_t;
+
+#define spif_regs ((spif_regs_t *) SPIF_BASE)
+
+#endif //USRP2P
+
+#endif /* INCLUDED_MEMORY_MAP_H */