summaryrefslogtreecommitdiffstats
path: root/firmware/microblaze
diff options
context:
space:
mode:
authorJosh Blum <josh@joshknows.com>2010-12-14 13:30:39 -0800
committerJosh Blum <josh@joshknows.com>2010-12-14 13:30:39 -0800
commitfcfac9f3607fdc04d3624034ada2ff724a500b06 (patch)
tree81f8ae7b52fa7460225ceedc59ebc6033cc8a5e7 /firmware/microblaze
parentc4fe49e84a5632eeae9d6102cba41d8b83ca2a99 (diff)
downloaduhd-fcfac9f3607fdc04d3624034ada2ff724a500b06.tar.gz
uhd-fcfac9f3607fdc04d3624034ada2ff724a500b06.tar.bz2
uhd-fcfac9f3607fdc04d3624034ada2ff724a500b06.zip
usrp2: removed auto* stuff (except usrp2p) and added to readme and authors
Diffstat (limited to 'firmware/microblaze')
-rw-r--r--firmware/microblaze/.gitignore45
-rw-r--r--firmware/microblaze/AUTHORS1
-rw-r--r--firmware/microblaze/COPYING674
-rw-r--r--firmware/microblaze/ChangeLog1
-rw-r--r--firmware/microblaze/INSTALL234
-rw-r--r--firmware/microblaze/Makefile.am29
-rw-r--r--firmware/microblaze/Makefile.common88
-rw-r--r--firmware/microblaze/NEWS0
-rw-r--r--firmware/microblaze/README17
-rwxr-xr-xfirmware/microblaze/bootstrap26
-rw-r--r--firmware/microblaze/configure.ac54
-rw-r--r--firmware/microblaze/lib/Makefile.inc47
-rw-r--r--firmware/microblaze/lib/net/.gitignore2
-rwxr-xr-xfirmware/microblaze/u2_flash_tool116
-rw-r--r--firmware/microblaze/usrp2/.gitignore9
-rw-r--r--firmware/microblaze/usrp2/Makefile.am45
-rw-r--r--firmware/microblaze/usrp2p/.gitignore9
-rw-r--r--firmware/microblaze/usrp2p/bootloader/.gitignore11
18 files changed, 16 insertions, 1392 deletions
diff --git a/firmware/microblaze/.gitignore b/firmware/microblaze/.gitignore
index e867fe87c..796b96d1c 100644
--- a/firmware/microblaze/.gitignore
+++ b/firmware/microblaze/.gitignore
@@ -1,46 +1 @@
-/*-stamp
-/*.a
-/*.bin
-/*.dump
-/*.log
-/*.rom
-/.deps
-/*.guess
-/*.sub
-/Makefile
-/Makefile.in
-/aclocal.m4
-/autom4te.cache
-/blink_leds
-/blink_leds2
/build
-/compile
-/config.h
-/config.h.in
-/config.log
-/config.status
-/configure
-/depcomp
-/eth_test
-/gen_eth_packets
-/ibs_rx_test
-/ibs_tx_test
-/install-sh
-/libtool
-/ltmain.sh
-/missing
-/py-compile
-/rcv_eth_packets
-/run_tests.sh
-/stamp-h1
-/test1
-/test_phy_comm
-/timer_test
-/buf_ram_test
-/buf_ram_zero
-/hello
-/configure.lineno
-/configure.guess
-/configure.sub
-*.deps
-*.o
diff --git a/firmware/microblaze/AUTHORS b/firmware/microblaze/AUTHORS
index c365261f8..c230624fb 100644
--- a/firmware/microblaze/AUTHORS
+++ b/firmware/microblaze/AUTHORS
@@ -1,3 +1,4 @@
Eric Blossom <eb@comsec.com>
Matt Ettus <matt@ettus.com>
Josh Blum <josh@ettus.com>
+Nick Foster <nick@ettus.com>
diff --git a/firmware/microblaze/COPYING b/firmware/microblaze/COPYING
deleted file mode 100644
index 94a9ed024..000000000
--- a/firmware/microblaze/COPYING
+++ /dev/null
@@ -1,674 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
- The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works. By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users. We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors. You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
- To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights. Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received. You must make sure that they, too, receive
-or can get the source code. And you must show them these terms so they
-know their rights.
-
- Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
- For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software. For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
- Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so. This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software. The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable. Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products. If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
- Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary. To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- TERMS AND CONDITIONS
-
- 0. Definitions.
-
- "This License" refers to version 3 of the GNU General Public License.
-
- "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
- "The Program" refers to any copyrightable work licensed under this
-License. Each licensee is addressed as "you". "Licensees" and
-"recipients" may be individuals or organizations.
-
- To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy. The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
- A "covered work" means either the unmodified Program or a work based
-on the Program.
-
- To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy. Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
- To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies. Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
- An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License. If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
- 1. Source Code.
-
- The "source code" for a work means the preferred form of the work
-for making modifications to it. "Object code" means any non-source
-form of a work.
-
- A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
- The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form. A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
- The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities. However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work. For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
- The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
- The Corresponding Source for a work in source code form is that
-same work.
-
- 2. Basic Permissions.
-
- All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met. This License explicitly affirms your unlimited
-permission to run the unmodified Program. The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work. This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
- You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force. You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright. Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
- Conveying under any other circumstances is permitted solely under
-the conditions stated below. Sublicensing is not allowed; section 10
-makes it unnecessary.
-
- 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
- No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
- When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
- 4. Conveying Verbatim Copies.
-
- You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
- You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
- 5. Conveying Modified Source Versions.
-
- You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
- a) The work must carry prominent notices stating that you modified
- it, and giving a relevant date.
-
- b) The work must carry prominent notices stating that it is
- released under this License and any conditions added under section
- 7. This requirement modifies the requirement in section 4 to
- "keep intact all notices".
-
- c) You must license the entire work, as a whole, under this
- License to anyone who comes into possession of a copy. This
- License will therefore apply, along with any applicable section 7
- additional terms, to the whole of the work, and all its parts,
- regardless of how they are packaged. This License gives no
- permission to license the work in any other way, but it does not
- invalidate such permission if you have separately received it.
-
- d) If the work has interactive user interfaces, each must display
- Appropriate Legal Notices; however, if the Program has interactive
- interfaces that do not display Appropriate Legal Notices, your
- work need not make them do so.
-
- A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit. Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
- 6. Conveying Non-Source Forms.
-
- You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
- a) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by the
- Corresponding Source fixed on a durable physical medium
- customarily used for software interchange.
-
- b) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by a
- written offer, valid for at least three years and valid for as
- long as you offer spare parts or customer support for that product
- model, to give anyone who possesses the object code either (1) a
- copy of the Corresponding Source for all the software in the
- product that is covered by this License, on a durable physical
- medium customarily used for software interchange, for a price no
- more than your reasonable cost of physically performing this
- conveying of source, or (2) access to copy the
- Corresponding Source from a network server at no charge.
-
- c) Convey individual copies of the object code with a copy of the
- written offer to provide the Corresponding Source. This
- alternative is allowed only occasionally and noncommercially, and
- only if you received the object code with such an offer, in accord
- with subsection 6b.
-
- d) Convey the object code by offering access from a designated
- place (gratis or for a charge), and offer equivalent access to the
- Corresponding Source in the same way through the same place at no
- further charge. You need not require recipients to copy the
- Corresponding Source along with the object code. If the place to
- copy the object code is a network server, the Corresponding Source
- may be on a different server (operated by you or a third party)
- that supports equivalent copying facilities, provided you maintain
- clear directions next to the object code saying where to find the
- Corresponding Source. Regardless of what server hosts the
- Corresponding Source, you remain obligated to ensure that it is
- available for as long as needed to satisfy these requirements.
-
- e) Convey the object code using peer-to-peer transmission, provided
- you inform other peers where the object code and Corresponding
- Source of the work are being offered to the general public at no
- charge under subsection 6d.
-
- A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
- A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling. In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage. For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product. A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
- "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source. The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
- If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information. But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
- The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed. Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
- Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
- 7. Additional Terms.
-
- "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law. If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
- When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it. (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.) You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
- Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
- a) Disclaiming warranty or limiting liability differently from the
- terms of sections 15 and 16 of this License; or
-
- b) Requiring preservation of specified reasonable legal notices or
- author attributions in that material or in the Appropriate Legal
- Notices displayed by works containing it; or
-
- c) Prohibiting misrepresentation of the origin of that material, or
- requiring that modified versions of such material be marked in
- reasonable ways as different from the original version; or
-
- d) Limiting the use for publicity purposes of names of licensors or
- authors of the material; or
-
- e) Declining to grant rights under trademark law for use of some
- trade names, trademarks, or service marks; or
-
- f) Requiring indemnification of licensors and authors of that
- material by anyone who conveys the material (or modified versions of
- it) with contractual assumptions of liability to the recipient, for
- any liability that these contractual assumptions directly impose on
- those licensors and authors.
-
- All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10. If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term. If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
- If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
- Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
- 8. Termination.
-
- You may not propagate or modify a covered work except as expressly
-provided under this License. Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
- However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
- Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
- 9. Acceptance Not Required for Having Copies.
-
- You are not required to accept this License in order to receive or
-run a copy of the Program. Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance. However,
-nothing other than this License grants you permission to propagate or
-modify any covered work. These actions infringe copyright if you do
-not accept this License. Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
- 10. Automatic Licensing of Downstream Recipients.
-
- Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License. You are not responsible
-for enforcing compliance by third parties with this License.
-
- An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations. If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
- You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License. For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
- 11. Patents.
-
- A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based. The
-work thus licensed is called the contributor's "contributor version".
-
- A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version. For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
- Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
- In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement). To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
- If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients. "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
- If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
- A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License. You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
- Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
- 12. No Surrender of Others' Freedom.
-
- If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all. For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
- 13. Use with the GNU Affero General Public License.
-
- Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work. The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
- 14. Revised Versions of this License.
-
- The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation. If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
- If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
- Later license versions may give you additional or different
-permissions. However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
- 15. Disclaimer of Warranty.
-
- THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. Limitation of Liability.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
- 17. Interpretation of Sections 15 and 16.
-
- If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
- If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
- <program> Copyright (C) <year> <name of author>
- This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
- You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
- The GNU General Public License does not permit incorporating your program
-into proprietary programs. If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License. But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/firmware/microblaze/ChangeLog b/firmware/microblaze/ChangeLog
deleted file mode 100644
index 8b1378917..000000000
--- a/firmware/microblaze/ChangeLog
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/firmware/microblaze/INSTALL b/firmware/microblaze/INSTALL
deleted file mode 100644
index 5458714e1..000000000
--- a/firmware/microblaze/INSTALL
+++ /dev/null
@@ -1,234 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
diff --git a/firmware/microblaze/Makefile.am b/firmware/microblaze/Makefile.am
deleted file mode 100644
index 52fa649c2..000000000
--- a/firmware/microblaze/Makefile.am
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# Copyright 2007,2008 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(top_srcdir)/Makefile.common
-
-EXTRA_DIST = \
- u2_flash_tool
-
-SUBDIRS = \
- usrp2 \
- usrp2p \
- usrp2p/bootloader
-
diff --git a/firmware/microblaze/Makefile.common b/firmware/microblaze/Makefile.common
deleted file mode 100644
index 4e726edab..000000000
--- a/firmware/microblaze/Makefile.common
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# Copyright 2007 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(top_srcdir)/lib/Makefile.inc
-
-########################################################################
-# lwIP header include dirs
-########################################################################
-LWIPDIR = $(top_srcdir)/lwip/lwip-1.3.1
-
-LWIP_INCLUDES = \
- -I$(top_srcdir)/lwip \
- -I$(top_srcdir)/lwip_port \
- -I$(LWIPDIR)/src/include \
- -I$(LWIPDIR)/src/include/ipv4
-
-########################################################################
-# misc flags for the mb-gcc compiler
-########################################################################
-MBGCC_CFLAGS = \
- --std=gnu99 -Wall -Werror-implicit-function-declaration \
- -mxl-soft-div -msoft-float -mxl-soft-mul -mxl-barrel-shift
-
-########################################################################
-# define for the hal io (FIXME move?)
-########################################################################
-#HAL_IO = -DHAL_IO_USES_DBOARD_PINS
-HAL_IO = -DHAL_IO_USES_UART
-
-########################################################################
-# common cflags and ldflags
-########################################################################
-COMMON_CFLAGS = \
- -I$(top_srcdir)/../../host/lib/usrp \
- -I$(top_srcdir)/lib \
- $(MBGCC_CFLAGS) \
- $(LWIP_INCLUDES) \
- $(HAL_IO)
-
-COMMON_LFLAGS = \
- -Wl,-Map -Wl,$(@:.elf=.map)
-
-########################################################################
-# Common stuff for building top level microblaze images
-########################################################################
-#we use COMMON_IHX_ARGS to relocate the reset and interrupt vectors to
-#just below the start of code. upon creating the BIN, any leading padding
-#is thrown out, so the .bin file is valid for uploading to USRP2P. this
-#does not affect USRP2 because the USRP2 already starts at 0x0000, and
-#because the relocate_args are not defined for USRP2's Makefile.am.
-.elf.bin:
- $(MB_OBJCOPY) -O binary $(RELOCATE_ARGS) $< $@
-
-.elf.dump:
- $(MB_OBJDUMP) -DSC $< > $@
-
-.bin.rom:
- $(HEXDUMP) -v -e'1/1 "%.2X\n"' $< > $@
-
-.elf.ihx:
- $(MB_OBJCOPY) -O ihex $(RELOCATE_ARGS) $< $@
-
-_generated_from_elf = \
- $(noinst_PROGRAMS:.elf=.map) \
- $(noinst_PROGRAMS:.elf=.bin) \
- $(noinst_PROGRAMS:.elf=.dump) \
- $(noinst_PROGRAMS:.elf=.rom) \
- $(noinst_PROGRAMS:.elf=.ihx)
-
-noinst_DATA = $(_generated_from_elf)
-
-MOSTLYCLEANFILES = $(_generated_from_elf)
diff --git a/firmware/microblaze/NEWS b/firmware/microblaze/NEWS
deleted file mode 100644
index e69de29bb..000000000
--- a/firmware/microblaze/NEWS
+++ /dev/null
diff --git a/firmware/microblaze/README b/firmware/microblaze/README
index 1479ffe1f..ba0aa11eb 100644
--- a/firmware/microblaze/README
+++ b/firmware/microblaze/README
@@ -1,3 +1,16 @@
-./bootstrap
-./configure --host=mb
+########################################################################
+# ZPU firmware code for USRP2 and N Series
+########################################################################
+This code requires the gcc-zpu tool-chain which can be found here:
+
+http://opensource.zylin.com/zpudownload.html
+
+zpu-elf-gcc should be in your $PATH
+
+########################################################################
+# Run the following commands to build
+########################################################################
+mkdir build
+cd build
+cmake ../
make
diff --git a/firmware/microblaze/bootstrap b/firmware/microblaze/bootstrap
deleted file mode 100755
index 26987b0ec..000000000
--- a/firmware/microblaze/bootstrap
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-rm -rf *.cache
-rm -rf libusrp2/.deps
-rm -rf libusrp2p/.deps
-
-aclocal
-autoconf
-libtoolize --automake
-automake --add-missing --gnu --warnings=all
diff --git a/firmware/microblaze/configure.ac b/firmware/microblaze/configure.ac
deleted file mode 100644
index f6986f2dd..000000000
--- a/firmware/microblaze/configure.ac
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-##################################################
-## Setup Autotools
-##################################################
-AC_PREREQ(2.60)
-AC_INIT
-AM_INIT_AUTOMAKE(uhd-mb, 0)
-
-##################################################
-## Setup Compiler
-##################################################
-dnl Fix 2.64 cross compile detection for AVR and RTEMS
-dnl by not trying to compile fopen.
-m4_if(m4_defn([m4_PACKAGE_VERSION]), [2.64],
- [m4_foreach([_GCC_LANG], [C, C++, Fortran, Fortran 77],
- [m4_define([_AC_LANG_IO_PROGRAM(]_GCC_LANG[)], m4_defn([AC_LANG_PROGRAM(]_GCC_LANG[)]))])])
-
-AC_PROG_CC([mb-gcc])
-AM_PROG_CC_C_O
-LT_INIT
-
-##################################################
-## Setup Tools
-##################################################
-AC_PATH_PROG([MB_OBJCOPY], [mb-objcopy])
-AC_PATH_PROG([MB_OBJDUMP], [mb-objdump])
-AC_PATH_PROG([HEXDUMP], [hexdump])
-
-##################################################
-## Create Files
-##################################################
-AC_CONFIG_FILES([ \
- Makefile \
- usrp2p/bootloader/Makefile \
- usrp2/Makefile \
- usrp2p/Makefile \
-])
-AC_OUTPUT
diff --git a/firmware/microblaze/lib/Makefile.inc b/firmware/microblaze/lib/Makefile.inc
deleted file mode 100644
index d99fc4d98..000000000
--- a/firmware/microblaze/lib/Makefile.inc
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# Copyright 2007 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-COMMON_SRCS = \
- $(top_srcdir)/lib/u2_init.c \
- $(top_srcdir)/lib/abort.c \
- $(top_srcdir)/lib/ad9510.c \
- $(top_srcdir)/lib/clocks.c \
- $(top_srcdir)/lib/eeprom.c \
- $(top_srcdir)/lib/eth_addrs.c \
- $(top_srcdir)/lib/eth_mac.c \
- $(top_srcdir)/lib/_exit.c \
- $(top_srcdir)/lib/exit.c \
- $(top_srcdir)/lib/hal_io.c \
- $(top_srcdir)/lib/hal_uart.c \
- $(top_srcdir)/lib/i2c.c \
- $(top_srcdir)/lib/mdelay.c \
- $(top_srcdir)/lib/memcpy_wa.c \
- $(top_srcdir)/lib/memset_wa.c \
- $(top_srcdir)/lib/nonstdio.c \
- $(top_srcdir)/lib/pic.c \
- $(top_srcdir)/lib/pkt_ctrl.c \
- $(top_srcdir)/lib/print_addrs.c \
- $(top_srcdir)/lib/print_rmon_regs.c \
- $(top_srcdir)/lib/print_buffer.c \
- $(top_srcdir)/lib/printf.c \
- $(top_srcdir)/lib/ihex.c \
- $(top_srcdir)/lib/spi.c \
- $(top_srcdir)/lib/net_common.c \
- $(top_srcdir)/lib/arp_cache.c \
- $(top_srcdir)/lib/banal.c
diff --git a/firmware/microblaze/lib/net/.gitignore b/firmware/microblaze/lib/net/.gitignore
deleted file mode 100644
index 282522db0..000000000
--- a/firmware/microblaze/lib/net/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Makefile
-Makefile.in
diff --git a/firmware/microblaze/u2_flash_tool b/firmware/microblaze/u2_flash_tool
deleted file mode 100755
index 2b66a4ac0..000000000
--- a/firmware/microblaze/u2_flash_tool
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/usr/bin/env python
-
-import sys
-from optparse import OptionParser
-
-SECTOR_SIZE = 512 # bytes
-MAX_FILE_SIZE = 1 * (2**20) # maximum number of bytes we'll burn to a slot
-
-FPGA_OFFSET = 0 # offset in flash to fpga image
-FIRMWARE_OFFSET = 1 * (2**20) # offset in flash to firmware image
-
-def read_file_data(filename):
- f = open(filename, "rb")
- file_data = f.read(MAX_FILE_SIZE)
- t = len(file_data) % SECTOR_SIZE
- if t != 0:
- file_data += (SECTOR_SIZE - t)*chr(0) # pad to an even sector size w/ zeros
- return file_data
-
-
-def write_flash(offset, filename, devname):
- file_data = read_file_data(filename)
- dev = open(devname, "wb")
- dev.seek(offset, 0) # seek to absolute byte offset
- dev.write(file_data)
- dev.flush()
- dev.close()
- return True
-
-
-def verify_flash(offset, filename, devname):
- file_data = read_file_data(filename)
- dev = open(devname, "rb")
- dev.seek(offset, 0) # seek to absolute byte offset
- dev_data = dev.read(len(file_data))
- if len(dev_data) != len(file_data):
- sys.stderr.write("short read on device %s\n" % (devname,))
- return False
-
- if file_data == dev_data:
- return True
-
- # doesn't match
- nwrong = 0
- for i in range(len(file_data)):
- if dev_data[i] != file_data[i]:
- sys.stderr.write("mismatch at offset %7d. Expected 0x%02x, got 0x%02x\n" % (
- i, ord(file_data[i]), ord(dev_data[i])))
- nwrong += 1
- if nwrong > 16:
- sys.stderr.write("> 16 errors, stopping comparison\n")
- break
- return False
-
-def read_flash(offset, filename, devname):
- dev = open(devname, "rb")
- dev.seek(offset, 0) # seek to absolute byte offset
- dev_data = dev.read(MAX_FILE_SIZE)
- dev.close()
- open(filename, "wb").write(dev_data)
-
-
-def main():
- parser = OptionParser(usage="%prog: [options] filename")
- parser.add_option("-w", "--write", action="store_const", const="write", dest="mode",
- help="write FILE to TARGET slot")
- parser.add_option("-v", "--verify", action="store_const", const="verify", dest="mode",
- help="verify FILE against TARGET slot")
- parser.add_option("-r", "--read", action="store_const", const="read", dest="mode",
- help="read TARGET slot, write to FILE")
- parser.add_option("-t", "--target", type="choice", choices=("fpga", "s/w"), default="s/w",
- help="select TARGET slot from: fpga, s/w [default=%default]")
- parser.add_option("", "--dev", default=None,
- help="specify flash device file, e.g., /dev/sdb. Be careful!")
- parser.set_defaults(target="s/w", mode=None)
-
- (options, args) = parser.parse_args()
- if len(args) != 1:
- parser.print_help()
- raise SystemExit
-
- filename = args[0]
-
- if options.mode is None:
- sys.stderr.write("specify mode with -w, -v or -r\n")
- parser.print_help()
- raise SystemExit
-
- if options.dev is None:
- sys.stderr.write("specify the device file with --dev\n")
- parser.print_help()
- raise SystemExit
-
- offset = { "fpga" : FPGA_OFFSET, "s/w" : FIRMWARE_OFFSET }[options.target]
-
- if options.mode == "write":
- r = (write_flash(offset, filename, options.dev)
- and verify_flash(offset, filename, options.dev))
- elif options.mode == "verify":
- r = verify_flash(offset, filename, options.dev)
- elif options.mode == "read":
- r = read_flash(offset, filename, options.dev)
- else:
- raise NotImplemented
-
- if not r:
- raise SystemExit, 1
-
-
-if __name__ == "__main__":
- main()
-
-
-
-
-
diff --git a/firmware/microblaze/usrp2/.gitignore b/firmware/microblaze/usrp2/.gitignore
deleted file mode 100644
index 18f715618..000000000
--- a/firmware/microblaze/usrp2/.gitignore
+++ /dev/null
@@ -1,9 +0,0 @@
-/Makefile
-/Makefile.in
-/*.a
-/*.bin
-/*.dump
-/*.ihx
-/*.elf
-/*.rom
-/*.map
diff --git a/firmware/microblaze/usrp2/Makefile.am b/firmware/microblaze/usrp2/Makefile.am
deleted file mode 100644
index 7fd353204..000000000
--- a/firmware/microblaze/usrp2/Makefile.am
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(top_srcdir)/Makefile.common
-
-AM_CFLAGS = \
- $(COMMON_CFLAGS)
-
-AM_LDFLAGS = \
- $(COMMON_LFLAGS) \
- -Wl,-defsym -Wl,_TEXT_START_ADDR=0x0050 \
- -Wl,-defsym -Wl,_STACK_SIZE=3072
-
-LDADD = libusrp2.a
-
-########################################################################
-# USRP2 specific library and programs
-########################################################################
-noinst_LIBRARIES = libusrp2.a
-
-libusrp2_a_SOURCES = \
- $(COMMON_SRCS) \
- sd.c \
- ethernet.c \
- udp_fw_update.c
-
-noinst_PROGRAMS = \
- usrp2_txrx_uhd.elf
-
-usrp2_txrx_uhd_elf_SOURCES = \
- $(top_srcdir)/apps/txrx_uhd.c
diff --git a/firmware/microblaze/usrp2p/.gitignore b/firmware/microblaze/usrp2p/.gitignore
deleted file mode 100644
index 18f715618..000000000
--- a/firmware/microblaze/usrp2p/.gitignore
+++ /dev/null
@@ -1,9 +0,0 @@
-/Makefile
-/Makefile.in
-/*.a
-/*.bin
-/*.dump
-/*.ihx
-/*.elf
-/*.rom
-/*.map
diff --git a/firmware/microblaze/usrp2p/bootloader/.gitignore b/firmware/microblaze/usrp2p/bootloader/.gitignore
deleted file mode 100644
index 17b0f82f3..000000000
--- a/firmware/microblaze/usrp2p/bootloader/.gitignore
+++ /dev/null
@@ -1,11 +0,0 @@
-/*.ihx
-/*.rmi
-/*_rom
-/*.elf
-/*.bin
-/*.dump
-/*.log
-/*.rom
-/*.map
-/Makefile
-/Makefile.in