Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p-next

Conflicts:
	firmware/microblaze/lib/u2_init.c
	host/lib/usrp/usrp2/clock_ctrl.cpp
	host/lib/usrp/usrp2/fw_common.h
	host/lib/usrp/usrp2/mboard_impl.cpp
	host/lib/usrp/usrp2/usrp2_iface.cpp
	host/lib/usrp/usrp2/usrp2_iface.hpp

9 files changed, 154 insertions, 107 deletions

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index 482332f7c..d00f2bc1f 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -446,6 +446,7 @@ link_changed_callback(int speed)
   link_is_up = speed != 0;
   hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45);
   printf("\neth link changed: speed = %d\n", speed);
+  if (link_is_up) send_gratuitous_arp();
 }
 
 static void setup_network(void){
@@ -503,16 +504,19 @@ main(void)
   printf("FPGA compatibility number: %d\n", USRP2_FPGA_COMPAT_NUM);
   printf("Firmware compatibility number: %d\n", USRP2_FW_COMPAT_NUM);
 
-  ethernet_register_link_changed_callback(link_changed_callback);
-  ethernet_init();
-
+  //1) register the addresses into the network stack
   register_mac_addr(ethernet_mac_addr());
   register_ip_addr(get_ip_addr());
 
+  //2) register callbacks for udp ports we service
   register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet);
   register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet);
   register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet);
 
+  //3) setup ethernet hardware to bring the link up
+  ethernet_register_link_changed_callback(link_changed_callback);
+  ethernet_init();
+
   // initialize double buffering state machine for ethernet -> DSP Tx
 
   dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0,
@@ -561,7 +565,7 @@ main(void)
     }
 
     if (pending & PIC_OVERRUN_INT){
-      dbsm_handle_rx_overrun(&dsp_rx_sm);
+      //dbsm_handle_rx_overrun(&dsp_rx_sm);
       pic_regs->pending = PIC_OVERRUN_INT;	// clear pending interrupt
 
       // FIXME Figure out how to handle this robustly.
diff --git a/firmware/microblaze/lib/Makefile.inc b/firmware/microblaze/lib/Makefile.inc
index 349ff2cd0..38c630df4 100644
--- a/firmware/microblaze/lib/Makefile.inc
+++ b/firmware/microblaze/lib/Makefile.inc
@@ -26,6 +26,7 @@ COMMON_SRCS = \
 	$(top_srcdir)/lib/clocks.c \
 	$(top_srcdir)/lib/dbsm.c \
 	$(top_srcdir)/lib/eeprom.c \
+	$(top_srcdir)/lib/eth_addrs.c \
 	$(top_srcdir)/lib/eth_mac.c \
 	$(top_srcdir)/lib/_exit.c \
 	$(top_srcdir)/lib/exit.c \
diff --git a/firmware/microblaze/lib/eth_addrs.c b/firmware/microblaze/lib/eth_addrs.c
new file mode 100644
index 000000000..c6320e4fa
--- /dev/null
+++ b/firmware/microblaze/lib/eth_addrs.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2010 Ettus Research LLC
+ * Copyright 2007 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ethernet.h"
+#include "memory_map.h"
+#include "nonstdio.h"
+#include <stdbool.h>
+#include "i2c.h"
+#include "usrp2/fw_common.h"
+
+////////////////////////////////////////////////////////////////////////
+// EEPROM Layout
+////////////////////////////////////////////////////////////////////////
+#define USRP2_EE_MBOARD_MAC_ADDR 0x02 //6 bytes
+#define USRP2_EE_MBOARD_IP_ADDR  0x0C //uint32, big-endian
+
+static bool
+unprogrammed(const void *t, size_t len)
+{
+  int i;
+  uint8_t *p = (uint8_t *)t;
+  bool all_zeros = true;
+  bool all_ones =  true;
+  for (i = 0; i < len; i++){
+    all_zeros &= p[i] == 0x00;
+    all_ones  &= p[i] == 0xff;
+  }
+  return all_ones | all_zeros;
+}
+
+//////////////////// MAC Addr Stuff ///////////////////////
+
+static int8_t src_mac_addr_initialized = false;
+static eth_mac_addr_t src_mac_addr = {{
+    0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff
+  }};
+
+const eth_mac_addr_t *
+ethernet_mac_addr(void)
+{
+  if (!src_mac_addr_initialized){    // fetch from eeprom
+    src_mac_addr_initialized = true;
+
+    // if we're simulating, don't read the EEPROM model, it's REALLY slow
+    if (hwconfig_simulation_p())
+      return &src_mac_addr;
+
+    eth_mac_addr_t tmp;
+    bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp));
+    if (!ok || unprogrammed(&tmp, sizeof(tmp))){
+      // use the default
+    }
+    else
+      src_mac_addr = tmp;
+  }
+
+  return &src_mac_addr;
+}
+
+bool
+ethernet_set_mac_addr(const eth_mac_addr_t *t)
+{
+  bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t));
+  if (ok){
+    src_mac_addr = *t;
+    src_mac_addr_initialized = true;
+    //eth_mac_set_addr(t); //this breaks the link
+  }
+
+  return ok;
+}
+
+//////////////////// IP Addr Stuff ///////////////////////
+
+static int8_t src_ip_addr_initialized = false;
+static struct ip_addr src_ip_addr = {
+    (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0)
+};
+
+
+const struct ip_addr *get_ip_addr(void)
+{
+  if (!src_ip_addr_initialized){    // fetch from eeprom
+    src_ip_addr_initialized = true;
+
+    // if we're simulating, don't read the EEPROM model, it's REALLY slow
+    if (hwconfig_simulation_p())
+      return &src_ip_addr;
+
+    struct ip_addr tmp;
+    bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp));
+    if (!ok || unprogrammed(&tmp, sizeof(tmp))){
+      // use the default
+    }
+    else
+      src_ip_addr = tmp;
+  }
+
+  return &src_ip_addr;
+}
+
+bool set_ip_addr(const struct ip_addr *t){
+  bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr));
+  if (ok){
+    src_ip_addr = *t;
+    src_ip_addr_initialized = true;
+  }
+
+  return ok;
+}
diff --git a/firmware/microblaze/lib/net_common.c b/firmware/microblaze/lib/net_common.c
index 6c9509c92..beaaa5948 100644
--- a/firmware/microblaze/lib/net_common.c
+++ b/firmware/microblaze/lib/net_common.c
@@ -351,6 +351,22 @@ send_arp_reply(struct arp_eth_ipv4 *req, eth_mac_addr_t our_mac)
   send_pkt(t, ETHERTYPE_ARP, &reply, sizeof(reply), 0, 0, 0, 0);
 }
 
+void send_gratuitous_arp(void){
+  struct arp_eth_ipv4 req _AL4;
+  req.ar_hrd = ARPHRD_ETHER;
+  req.ar_pro = ETHERTYPE_IPV4;
+  req.ar_hln = sizeof(eth_mac_addr_t);
+  req.ar_pln = sizeof(struct ip_addr);
+  req.ar_op = ARPOP_REQUEST;
+  memcpy(req.ar_sha, ethernet_mac_addr(), sizeof(eth_mac_addr_t));
+  memcpy(req.ar_sip, get_ip_addr(),       sizeof(struct ip_addr));
+  memset(req.ar_tha, 0x00,                sizeof(eth_mac_addr_t));
+  memcpy(req.ar_tip, get_ip_addr(),       sizeof(struct ip_addr));
+
+  //send the request with a broadcast ethernet mac address
+  eth_mac_addr_t t; memset(&t, 0xff, sizeof(t));
+  send_pkt(t, ETHERTYPE_ARP, &req, sizeof(req), 0, 0, 0, 0);
+}
 
 static void
 handle_arp_packet(struct arp_eth_ipv4 *p, size_t size)
diff --git a/firmware/microblaze/lib/net_common.h b/firmware/microblaze/lib/net_common.h
index 112669b46..3040e5ef3 100644
--- a/firmware/microblaze/lib/net_common.h
+++ b/firmware/microblaze/lib/net_common.h
@@ -47,4 +47,6 @@ void send_udp_pkt(int src_port, struct socket_address dst,
 
 void handle_eth_packet(uint32_t *p, size_t nlines);
 
+void send_gratuitous_arp(void);
+
 #endif /* INCLUDED_NET_COMMON_H */
diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c
index 3c8f5f02a..4a553a713 100644
--- a/firmware/microblaze/lib/u2_init.c
+++ b/firmware/microblaze/lib/u2_init.c
@@ -62,7 +62,6 @@ u2_init(void)
   i2c_init();
   i2c_register_handler(); //for using async I2C
   hal_enable_ints();
-  get_hw_rev();
 
   bp_init();	// buffer pool
   
diff --git a/firmware/microblaze/lib/u2_init.h b/firmware/microblaze/lib/u2_init.h
index 334791189..848bd88de 100644
--- a/firmware/microblaze/lib/u2_init.h
+++ b/firmware/microblaze/lib/u2_init.h
@@ -20,9 +20,6 @@
 
 #include <stdbool.h>
 
-extern unsigned char u2_hw_rev_major;
-extern unsigned char u2_hw_rev_minor;
-
 /*!
  * one-time init
  */
diff --git a/firmware/microblaze/usrp2/Makefile.am b/firmware/microblaze/usrp2/Makefile.am
index e3f57728a..7a58e7253 100644
--- a/firmware/microblaze/usrp2/Makefile.am
+++ b/firmware/microblaze/usrp2/Makefile.am
@@ -27,6 +27,8 @@ AM_LDFLAGS = \
 	
 LDADD = libusrp2.a
 
+LDADD = libusrp2.a
+
 ########################################################################
 # USRP2 specific library and programs
 ########################################################################
diff --git a/firmware/microblaze/usrp2/ethernet.c b/firmware/microblaze/usrp2/ethernet.c
index d60d7dc4c..5d4654bda 100644
--- a/firmware/microblaze/usrp2/ethernet.c
+++ b/firmware/microblaze/usrp2/ethernet.c
@@ -16,16 +16,12 @@
  */
 
 #include "ethernet.h"
-#include "memory_map.h"
 #include "eth_phy.h"
 #include "eth_mac.h"
 #include "eth_mac_regs.h"
 #include "pic.h"
 #include "hal_io.h"
 #include "nonstdio.h"
-#include <stdbool.h>
-#include "i2c.h"
-#include "usrp2/fw_common.h"
 
 #define VERBOSE 1
 
@@ -269,101 +265,6 @@ ethernet_init(void)
   eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG);
 }
 
-static bool 
-unprogrammed(const void *t, size_t len)
-{
-  int i;
-  uint8_t *p = (uint8_t *)t;
-  bool all_zeros = true;
-  bool all_ones =  true;
-  for (i = 0; i < len; i++){
-    all_zeros &= p[i] == 0x00;
-    all_ones  &= p[i] == 0xff;
-  }
-  return all_ones | all_zeros;
-}
-
-//////////////////// MAC Addr Stuff ///////////////////////
-
-static int8_t src_mac_addr_initialized = false;
-static eth_mac_addr_t src_mac_addr = {{
-    0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff
-  }};
-
-const eth_mac_addr_t *
-ethernet_mac_addr(void)
-{
-  if (!src_mac_addr_initialized){    // fetch from eeprom
-    src_mac_addr_initialized = true;
-
-    // if we're simulating, don't read the EEPROM model, it's REALLY slow
-    if (hwconfig_simulation_p())
-      return &src_mac_addr;
-    
-    eth_mac_addr_t tmp;
-    bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp));
-    if (!ok || unprogrammed(&tmp, sizeof(tmp))){
-      // use the default
-    }
-    else
-      src_mac_addr = tmp;
-  }
-
-  return &src_mac_addr;
-}
-
-bool
-ethernet_set_mac_addr(const eth_mac_addr_t *t)
-{
-  bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t));
-  if (ok){
-    src_mac_addr = *t;
-    src_mac_addr_initialized = true;
-    //eth_mac_set_addr(t); //this breaks the link
-  }
-
-  return ok;
-}
-
-//////////////////// IP Addr Stuff ///////////////////////
-
-static int8_t src_ip_addr_initialized = false;
-static struct ip_addr src_ip_addr = {
-    (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0)
-};
-
-
-const struct ip_addr *get_ip_addr(void)
-{
-  if (!src_ip_addr_initialized){    // fetch from eeprom
-    src_ip_addr_initialized = true;
-
-    // if we're simulating, don't read the EEPROM model, it's REALLY slow
-    if (hwconfig_simulation_p())
-      return &src_ip_addr;
-    
-    struct ip_addr tmp;
-    bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp));
-    if (!ok || unprogrammed(&tmp, sizeof(tmp))){
-      // use the default
-    }
-    else
-      src_ip_addr = tmp;
-  }
-
-  return &src_ip_addr;
-}
-
-bool set_ip_addr(const struct ip_addr *t){
-  bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr));
-  if (ok){
-    src_ip_addr = *t;
-    src_ip_addr_initialized = true;
-  }
-
-  return ok;
-}
-
 int
 ethernet_check_errors(void)
 {