zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

25 files changed, 0 insertions, 3177 deletions

diff --git a/firmware/microblaze/usrp2p/CMakeLists.txt b/firmware/microblaze/usrp2p/CMakeLists.txt
deleted file mode 100644
index 41ef8f1dd..000000000
--- a/firmware/microblaze/usrp2p/CMakeLists.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-########################################################################
-INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt)
-INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR})
-
-ADD_DEFINITIONS(-DUSRP2P)
-
-ADD_LIBRARY(libusrp2pfw STATIC
-    ${COMMON_SRCS}
-    spif.c
-    spi_flash.c
-    spi_flash_read.c
-    bootloader_utils.c
-    ethernet.c
-    xilinx_s3_icap.c
-    udp_fw_update.c
-)
-
-ADD_SUBDIRECTORY(bootloader)
-
-########################################################################
-ADD_EXECUTABLE(usrp2p_txrx_uhd.elf ${CMAKE_SOURCE_DIR}/apps/txrx_uhd.c)
-TARGET_LINK_LIBRARIES(usrp2p_txrx_uhd.elf libusrp2pfw)
-GEN_OUTPUTS(usrp2p_txrx_uhd.elf)
-
-ADD_EXECUTABLE(usrp2p_blinkenlights.elf ${CMAKE_SOURCE_DIR}/apps/blinkenlights.c)
-TARGET_LINK_LIBRARIES(usrp2p_blinkenlights.elf libusrp2pfw)
-GEN_OUTPUTS(usrp2p_blinkenlights.elf)
-
-ADD_EXECUTABLE(usrp2p_uart_flash_loader.elf ${CMAKE_SOURCE_DIR}/apps/uart_flash_loader.c)
-TARGET_LINK_LIBRARIES(usrp2p_uart_flash_loader.elf libusrp2pfw)
-GEN_OUTPUTS(usrp2p_uart_flash_loader.elf)
diff --git a/firmware/microblaze/usrp2p/Makefile.am b/firmware/microblaze/usrp2p/Makefile.am
deleted file mode 100644
index 40766b406..000000000
--- a/firmware/microblaze/usrp2p/Makefile.am
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(top_srcdir)/Makefile.common
-
-AM_CFLAGS = \
-	$(COMMON_CFLAGS) \
-	-DUSRP2P
-
-AM_LDFLAGS = \
-	$(COMMON_LFLAGS) \
-	-Wl,-defsym -Wl,_TEXT_START_ADDR=0x8050 \
-	-Wl,-defsym -Wl,_STACK_SIZE=3072
-
-LDADD = libusrp2p.a
-
-#all of this here is to relocate the hardware vectors to somewhere normal.
-RELOCATE_ARGS = \
-	--change-section-address .vectors.sw_exception+0x8000 \
-	--change-section-address .vectors.hw_exception+0x8000 \
-	--change-section-address .vectors.interrupt+0x8000 \
-	--change-section-address .vectors.reset+0x8000
-
-#	$(MB_OBJCOPY) -O ihex $< $@
-# the below would work if objcopy weren't written by apes
-#	$(MB_OBJCOPY) -O ihex -w --change-section-address .vectors*+0x8000 $< $@
-# using the below will throw away the interrupt vectors when they get relocated below 0x0000.
-#	$(MB_OBJCOPY) -O ihex --change-addresses -0x8000 $< $@
-
-########################################################################
-# USRP2P specific library and programs
-########################################################################
-noinst_LIBRARIES = libusrp2p.a
-
-libusrp2p_a_SOURCES = \
-	$(COMMON_SRCS) \
-	spif.c \
-	spi_flash.c \
-	spi_flash_read.c \
-	bootloader_utils.c \
-	ethernet.c \
-	xilinx_s3_icap.c \
-  udp_fw_update.c
-
-noinst_PROGRAMS = \
-	usrp2p_txrx_uhd.elf \
-  usrp2p_blinkenlights.elf \
-  usrp2p_uart_flash_loader.elf
-
-usrp2p_txrx_uhd_elf_SOURCES = \
-	$(top_srcdir)/apps/txrx_uhd.c
-
-usrp2p_blinkenlights_elf_SOURCES = \
-  $(top_srcdir)/apps/blinkenlights.c
-
-usrp2p_uart_flash_loader_elf_SOURCES = \
-  $(top_srcdir)/apps/uart_flash_loader.c
diff --git a/firmware/microblaze/usrp2p/bootconfig.h b/firmware/microblaze/usrp2p/bootconfig.h
deleted file mode 100644
index 35c2726ed..000000000
--- a/firmware/microblaze/usrp2p/bootconfig.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef INCLUDED_BOOTCONFIG_H
-#define INCLUDED_BOOTCONFIG_H
-
-#include <stdbool.h>
-
-typedef struct {
-  unsigned char	fpga_image_number;
-  unsigned char	firmware_image_number;
-} bootconfig_t;
-
-static inline bootconfig_t
-make_bootconfig(unsigned char fpga_image_number, unsigned char firmware_image_number)
-{
-  bootconfig_t r;
-  r.fpga_image_number = fpga_image_number;
-  r.firmware_image_number = firmware_image_number;
-  return r;
-}
-
-void bootconfig_init(void);	/* One time call to initialize */
-
-/*!
- * \return default boot configuration
- */
-bootconfig_t bootconfig_get_default(void);
-
-/*!
- * \brief Set the default boot configuration.
- */
-bool bootconfig_set_default(bootconfig_t bc);
-
-/*!
- * \brief attempt to boot the given fpga and software image.
- *
- * If successful, this routine does not return.
- * If it fail for some reason, it returns.
- */
-void bootconfig_boot(bootconfig_t bc);
-
-#endif /* INCLUDED_BOOTCONFIG_H */
diff --git a/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt b/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt
deleted file mode 100644
index 41c86cc9a..000000000
--- a/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# Copyright 2010 Ettus Research LLC
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-########################################################################
-INCLUDE(FindPythonInterp)
-
-MACRO(GEN_RMI target)
-    GET_FILENAME_COMPONENT(name ${target} NAME_WE)
-    #command to create a rmi from elf
-    ADD_CUSTOM_COMMAND(
-        OUTPUT ${name}.rmi DEPENDS ${name}.bin
-        COMMAND ${PYTHON_EXECUTABLE}
-        ARGS ${CMAKE_SOURCE_DIR}/bin/bin_to_ram_macro_init.py ${name}.bin ${name}.rmi
-    )
-    #add a top level target for output files
-    ADD_CUSTOM_TARGET(
-        ${name}_rmi ALL DEPENDS ${name}.rmi
-    )
-ENDMACRO(GEN_RMI)
-
-########################################################################
-ADD_EXECUTABLE(init_bootloader.elf init_bootloader.c)
-TARGET_LINK_LIBRARIES(init_bootloader.elf libusrp2pfw)
-GEN_OUTPUTS(init_bootloader.elf)
-GEN_RMI(init_bootloader.bin)
diff --git a/firmware/microblaze/usrp2p/bootloader/Makefile.am b/firmware/microblaze/usrp2p/bootloader/Makefile.am
deleted file mode 100644
index 1fc5daf9c..000000000
--- a/firmware/microblaze/usrp2p/bootloader/Makefile.am
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# Copyright 2007,2008,2009 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-include $(top_srcdir)/Makefile.common
-
-ROM_LINKER_SCRIPT = u2p2-rom.ld
-
-# loads into 8K boot ram located at 0x0000_0000
-AM_CFLAGS = $(COMMON_CFLAGS) -I$(top_srcdir)/usrp2p
-AM_LDFLAGS = -Wl,-T,$(ROM_LINKER_SCRIPT) $(COMMON_LFLAGS) -Wl,-defsym -Wl,_STACK_SIZE=1024
-
-EXTRA_DIST = $(ROM_LINKER_SCRIPT)
-
-LDADD = $(top_srcdir)/usrp2p/libusrp2p.a
-
-noinst_PROGRAMS = \
-	init_bootloader.elf
-
-init_bootloader_elf_SOURCES = init_bootloader.c
-
-.bin.rmi:
-	$(top_srcdir)/bin/bin_to_ram_macro_init.py $< $@
-
-_generated_from_elf += \
-	$(noinst_PROGRAMS:.elf=.rmi)
diff --git a/firmware/microblaze/usrp2p/bootloader/fpga_bootloader.c b/firmware/microblaze/usrp2p/bootloader/fpga_bootloader.c
deleted file mode 100644
index 9feff6ecd..000000000
--- a/firmware/microblaze/usrp2p/bootloader/fpga_bootloader.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This code is bootloader f/w for the slot 0 fpga image.  It's job is
- * to figure out which fpga image should be loaded, and then to load
- * that image from the SPI flash.  (FIXME handle retries, errors,
- * etc.)
- *
- * If the center button is down during boot, it loads firwmare
- * from 0:0 instead of its normal action.
- */
-
-#include <stdlib.h>
-#include <hal_io.h>
-#include <nonstdio.h>
-#include <mdelay.h>
-#include <quadradio/flashdir.h>
-#include <xilinx_v5_icap.h>
-#include <bootconfig.h>
-#include <bootconfig_private.h>
-#include <spi_flash.h>
-#include <string.h>
-#include <bootloader_utils.h>
-#include <hal_interrupts.h>
-
-#define VERBOSE 1
-
-#define	OUR_FPGA_IMAGE_NUMBER	0	// this code only runs in slot 0
-
-void hal_uart_init(void);
-void spif_init(void);
-void i2c_init(void);
-void bootconfig_init(void);
-
-void pic_interrupt_handler() __attribute__ ((interrupt_handler));
-
-void pic_interrupt_handler()
-{
-  // nop stub
-}
-
-static int
-flash_addr_of_fpga_slot(unsigned int fpga_slot)
-{
-  const struct flashdir *fd = get_flashdir();
-  return fd->slot[fpga_slot + fd->fpga_slot0].start << spi_flash_log2_sector_size();
-}
-
-
-/*
- * If the first 256 bytes of the image contain the string of bytes,
- * ff ff ff ff aa 99 55 66, we consider it a likely bitstream.
- */
-static bool
-looks_like_a_bitstream(unsigned int fpga_slot)
-{
-  unsigned char buf[256];
-  static const unsigned char pattern[] = {
-    0xff, 0xff, 0xff, 0xff, 0xaa, 0x99, 0x55, 0x66
-  };
-
-  // Read the first 256 bytes of the bitstream
-  spi_flash_read(flash_addr_of_fpga_slot(fpga_slot), sizeof(buf), buf);
-
-  for (int i = 0; i <= sizeof(buf) - sizeof(pattern); i++)
-    if (memcmp(pattern, &buf[i], sizeof(pattern)) == 0)
-      return true;
-
-  return false;
-}
-
-static bool
-plausible_bootconfig(bootconfig_t bc)
-{
-  // Are the fields in range?
-  if (!validate_bootconfig(bc))
-    return false;
-
-  if (!looks_like_a_bitstream(map_fpga_image_number_to_fpga_slot(bc.fpga_image_number)))
-    return false;
-
-  return true;
-}
-
-// Attempt to boot the fpga image specified in next_boot
-static void
-initial_boot_attempt(eeprom_boot_info_t *ee)
-{
-  if (ee->next_boot.fpga_image_number == OUR_FPGA_IMAGE_NUMBER){
-    load_firmware();
-    return;
-  }
-
-  ee->nattempts = 1;
-  _bc_write_eeprom_shadow();
-
-  unsigned int target_slot =
-    map_fpga_image_number_to_fpga_slot(ee->next_boot.fpga_image_number);
-  int flash_addr = flash_addr_of_fpga_slot(target_slot);
-
-  putstr("fpga_bootloader: chaining to ");
-  puthex4(ee->next_boot.fpga_image_number);
-  putchar(':');
-  puthex4(ee->next_boot.firmware_image_number);
-  newline();
-  mdelay(100);
-
-  while (1){
-    icap_reload_fpga(flash_addr);
-  }
-}
-
-int
-main(int argc, char **argv)
-{
-  hal_disable_ints();	// In case we got here via jmp 0x0
-  hal_uart_init();
-  i2c_init();
-  bootconfig_init();	// Must come after i2c_init.
-  spif_init();		// Needed for get_flashdir.
-
-  sr_leds->leds =  0xAAAA;
-
-  putstr("\n\n>>> fpga_bootloader <<<\n");
-
-  putstr("\nBOOTSTS ");
-  int bootsts = icap_read_config_reg(rBOOTSTS);
-  puthex32_nl(bootsts);
-  putstr("STAT    ");
-  int stat = icap_read_config_reg(rSTAT);
-  puthex32_nl(stat);
-
-  bool fallback =
-    ((bootsts & (BOOTSTS_VALID_0 | BOOTSTS_FALLBACK_0))
-     == (BOOTSTS_VALID_0 | BOOTSTS_FALLBACK_0));
-
-  if (fallback){
-    puts("FALLBACK_0 is set");
-    // FIXME handle fallback condition.
-  }
-
-  const struct flashdir *fd = get_flashdir();
-  if (fd == 0)
-    abort();
-
-  eeprom_boot_info_t *ee = _bc_get_eeprom_shadow();
-
-  if (VERBOSE){
-    putstr("nattempts: ");
-    puthex8_nl(ee->nattempts);
-  }
-
-  mdelay(500);	// wait for low-pass on switches
-  putstr("switches: "); puthex32_nl(readback->switches);
-
-  bool center_btn_down = (readback->switches & BTN_CENTER) != 0;
-  if (center_btn_down){
-    putstr("Center button is down!\n");
-    // Force boot of image 0:0
-    ee->next_boot = make_bootconfig(0, 0);
-  }
-
-  // if next_boot is valid, try it
-  if (plausible_bootconfig(ee->next_boot))
-    initial_boot_attempt(ee);	// no return
-
-  // if default_boot is valid, try it
-  if (plausible_bootconfig(ee->default_boot)){
-    ee->next_boot = ee->default_boot;
-    initial_boot_attempt(ee);	// no return
-  }
-
-  // If we're here, we're in trouble.  Try all of them...
-  for (int i = 0; i < 4; i++){
-    bootconfig_t bc = make_bootconfig(i, 0);
-    if (plausible_bootconfig(bc)){
-      ee->next_boot = bc;
-      initial_boot_attempt(ee);	// no return
-    }
-  }
-
-  // FIXME, try to find something we can load
-  puts("\n!!! Failed to find a valid FPGA bitstream!\n\n");
-
-  return 0;
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/fw_bootloader.c b/firmware/microblaze/usrp2p/bootloader/fw_bootloader.c
deleted file mode 100644
index a2c32bf8e..000000000
--- a/firmware/microblaze/usrp2p/bootloader/fw_bootloader.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <memory_map.h>
-#include <nonstdio.h>
-#include <stdlib.h>
-#include <bootconfig.h>
-#include <bootconfig_private.h>
-#include <bootloader_utils.h>
-#include <hal_interrupts.h>
-
-
-void hal_uart_init(void);
-void spif_init(void);
-void i2c_init(void);
-void bootconfig_init(void);
-
-void pic_interrupt_handler() __attribute__ ((interrupt_handler));
-
-void pic_interrupt_handler()
-{
-  // nop stub
-}
-
-int
-main(int argc, char **argv)
-{
-  hal_disable_ints();	// In case we got here via jmp 0x0
-  hal_uart_init();
-  i2c_init();
-  bootconfig_init();	// Must come after i2c_init.
-  spif_init();		// Needed for get_flashdir.
-
-  load_firmware();
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/icap_test.c b/firmware/microblaze/usrp2p/bootloader/icap_test.c
deleted file mode 100644
index 5feb9d014..000000000
--- a/firmware/microblaze/usrp2p/bootloader/icap_test.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2010 Ettus Research LLC
- *
- */
-
-#include <memory_map.h>
-#include <hal_io.h>
-#include <xilinx_s3_icap.h>
-#include <nonstdio.h>
-
-void delay(uint32_t t) {
-	while(t-- != 0) asm("NOP");
-}
-
-
-int main(int argc, char *argv[]) {
-	pic_init();
-	hal_uart_init();
-	puts("\nStarting delay...\n");
-
-	output_regs->leds = 0xFF;
-	delay(4000000);
-	output_regs->leds = 0x00;
-	delay(4000000);
-
-	puts("Rebooting FPGA to 0x00000000\n");
-	icap_reload_fpga((uint32_t)0x00000000);
-
-	return 0;
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c b/firmware/microblaze/usrp2p/bootloader/init_bootloader.c
deleted file mode 100644
index cfa80ffea..000000000
--- a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2010 Ettus Research LLC
- *
- */
-
-#include <memory_map.h>
-#include <nonstdio.h>
-#include <hal_io.h>
-#include <xilinx_s3_icap.h>
-#include <spi_flash.h>
-#include <spi_flash_private.h>
-//#include <clocks.h>
-#include <ihex.h>
-#include <bootloader_utils.h>
-#include <string.h>
-#include <hal_uart.h>
-#include <i2c.h>
-#include "usrp2/fw_common.h"
-
-//void pic_interrupt_handler() __attribute__ ((interrupt_handler));
-
-void pic_interrupt_handler()
-{
-  // nop stub
-}
-
-void load_ihex(void) { //simple IHEX parser to load proper records into RAM. loads program when it receives end of record.
-	char buf[128]; //input data buffer
-	uint8_t ihx[32]; //ihex data buffer
-
-	ihex_record_t ihex_record;
-	ihex_record.data = ihx;
-
-	while(1) {
-		gets(buf);
-
-		if(!ihex_parse(buf, &ihex_record)) { //RAM data record is valid
-			if(ihex_record.addr >= RAM_BASE) { //it's expecting to see FULLY RELOCATED IHX RECORDS. every address referenced to 0x8000, including vectors.
-				memcpy((void *) (ihex_record.addr), ihex_record.data, ihex_record.length);
-				puts("OK");
-			} else if(ihex_record.type == 1) { //end of record
-				puts("OK");
-				//load main firmware
-				start_program();
-				puts("ERROR: main image returned! Back in IHEX load mode.");
-			} else puts("NOK"); //RAM loads do not support extended segment address records (04) -- upper 16 bits are always "0".
-		} else puts("NOK");
-	}
-}
-
-void delay(uint32_t t) {
-	while(t-- != 0) asm("NOP");
-}
-
-int main(int argc, char *argv[]) {
-  hal_disable_ints();	// In case we got here via jmp 0x0
-	output_regs->leds = 0xFF;
-	delay(5000);
-	output_regs->leds = 0x00;
-	hal_uart_init();
-	spif_init();
-	i2c_init(); //for EEPROM
-	puts("USRP2+ bootloader super ultra ZPU edition\n");
-	
-	bool production_image = find_safe_booted_flag();
-	set_safe_booted_flag(0); //haven't booted yet
-	
-	if(BUTTON_PUSHED) { //see memory_map.h
-		puts("Starting USRP2+ in safe mode.");
-		if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) {
-				set_safe_booted_flag(1); //let the firmware know it's the safe image
-				spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
-				start_program();
-				puts("ERROR: return from main program! This should never happen!");
-				icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
-			} else {
-				puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM.");
-				load_ihex();
-			}
-	}
-	
-	if(!production_image) {
-		puts("Checking for valid production FPGA image...");
-		if(is_valid_fpga_image(PROD_FPGA_IMAGE_LOCATION_ADDR)) {
-			puts("Valid production FPGA image found. Attempting to boot.");
-			set_safe_booted_flag(1);
-			delay(300); //so serial output can finish
-			icap_reload_fpga(PROD_FPGA_IMAGE_LOCATION_ADDR);
-		}
-		puts("No valid production FPGA image found.\nAttempting to load production firmware...");
-	}
-	if(is_valid_fw_image(PROD_FW_IMAGE_LOCATION_ADDR)) {
-		puts("Valid production firmware found. Loading...");
-		spi_flash_read(PROD_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
-		puts("Finished loading. Starting image.");
-		delay(300);
-		start_program();
-		puts("ERROR: Return from main program! This should never happen!");
-		//if this happens, though, the safest thing to do is reboot the whole FPGA and start over.
-		delay(300);
-		icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
-		return 1;
-	}
-	puts("No valid production firmware found. Trying safe firmware...");
-	if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) {
-		spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
-		puts("Finished loading. Starting image.");
-		delay(300);
-		start_program();
-		puts("ERROR: return from main program! This should never happen!");
-		delay(300);
-		icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
-		return 1;
-	}
-	puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM.");
-	load_ihex();
-
-	return 0;
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/serial_loader_burner.c b/firmware/microblaze/usrp2p/bootloader/serial_loader_burner.c
deleted file mode 100644
index 4ac4df454..000000000
--- a/firmware/microblaze/usrp2p/bootloader/serial_loader_burner.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <hal_io.h>
-#include <nonstdio.h>
-#include <mdelay.h>
-#include <gdbstub2.h>
-
-void hal_uart_init(void);
-void spif_init(void);
-
-void pic_interrupt_handler() __attribute__ ((interrupt_handler));
-
-void pic_interrupt_handler()
-{
-  // nop stub
-}
-
-int
-main(int argc, char **argv)
-{
-  hal_uart_init();
-  spif_init();
-
-  sr_leds->leds =  0;
-  mdelay(100);
-  sr_leds->leds = ~0;
-  mdelay(100);
-  sr_leds->leds =  0;
-
-  puts("\n\n>>> stage1: serial_loader_burner <<<");
-
-  gdbstub2_main_loop();
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/spi_bootloader.c b/firmware/microblaze/usrp2p/bootloader/spi_bootloader.c
deleted file mode 100644
index 678e66cf7..000000000
--- a/firmware/microblaze/usrp2p/bootloader/spi_bootloader.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <hal_io.h>
-#include <nonstdio.h>
-#include <mdelay.h>
-#include <spi_flash.h>
-#include <quadradio/flashdir.h>
-#include <quadradio/simple_binary_format.h>
-#include <stdlib.h>
-
-
-void hal_uart_init(void);
-void spif_init(void);
-
-void pic_interrupt_handler() __attribute__ ((interrupt_handler));
-
-void pic_interrupt_handler()
-{
-  // nop stub
-}
-
-static void
-error(int e)
-{
-  putstr("ERR");
-  puthex8(e);
-  newline();
-}
-
-static void
-load(uint32_t flash_addr, uint32_t ram_addr, uint32_t size)
-{
-  spi_flash_read(flash_addr, size, (void *) ram_addr);
-}
-
-static bool
-load_from_slot(const struct flashdir *fd, int fw_slot)
-{
-    putstr("Loading f/w image ");
-    putchar('0' + fw_slot);
-    putstr("... ");
-
-    if (fw_slot >= fd->fw_nslots){
-      error(1);
-      return false;
-    }
-
-    int slot = fw_slot + fd->fw_slot0;
-    if (fd->slot[slot].start == 0 || fd->slot[slot].start == 0xffff
-	|| fd->slot[slot].len == 0 || fd->slot[slot].len == 0xffff){
-      error(2);
-      return false;
-    }
-    
-    uint32_t sbf_base = fd->slot[slot].start << spi_flash_log2_sector_size();
-    uint32_t sbf_len  = fd->slot[slot].len << spi_flash_log2_sector_size();
-    uint32_t sbf_offset = 0;
-
-    struct sbf_header sbf;
-    spi_flash_read(sbf_base, sizeof(struct sbf_header), &sbf);
-    if (sbf.magic != SBF_MAGIC || sbf.nsections > SBF_MAX_SECTIONS){
-      error(3);
-      return false;
-    }
-    sbf_offset += sizeof(struct sbf_header);
-
-    unsigned int i;
-    for (i = 0; i < sbf.nsections; i++){
-      if (sbf_offset + sbf.sec_desc[i].length > sbf_len){
-	error(4);
-	return false;
-      }
-      load(sbf_offset + sbf_base,
-	   sbf.sec_desc[i].target_addr,
-	   sbf.sec_desc[i].length);
-      sbf_offset += sbf.sec_desc[i].length;
-    }
-    putstr("Done!");
-
-    typedef void (*fptr_t)(void);
-    (*(fptr_t) sbf.entry)();		// almost certainly no return
-
-    return true;
-}
-
-int
-main(int argc, char **argv)
-{
-  hal_uart_init();
-  spif_init();
-
-  sr_leds->leds =  0;
-  mdelay(100);
-  sr_leds->leds = ~0;
-  mdelay(100);
-  sr_leds->leds =  0;
-
-  putstr("\n>>> spi_bootloader <<<\n");
-
-  const struct flashdir *fd = get_flashdir();
-  if (fd == 0)
-    abort();
-
-  while(1){
-    int sw;
-    int fw_slot;
-    
-    sw = readback->switches;
-    fw_slot = sw & 0x7;
-
-    if (!load_from_slot(fd, fw_slot)){
-      if (fw_slot != 0){
-	putstr("Falling back to slot 0\n");
-	load_from_slot(fd, 0);
-      }
-    }
-  }
-}
diff --git a/firmware/microblaze/usrp2p/bootloader/u2p2-rom.ld b/firmware/microblaze/usrp2p/bootloader/u2p2-rom.ld
deleted file mode 100644
index 4c9eaa8e5..000000000
--- a/firmware/microblaze/usrp2p/bootloader/u2p2-rom.ld
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Same as default, but with bss and stack moved to top 2K of main ram
- * Copied from qr-rom.ld
- */
-
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-microblaze", "", "")
-/*SEARCH_DIR("/home/eb/build/Xilinx_EDK_GNU_10.1i/mb/release/lin/mb/microblaze-xilinx-elf/lib");*/
-
-
-ENTRY(_start)
-_TEXT_START_ADDR = DEFINED(_TEXT_START_ADDR) ? _TEXT_START_ADDR : 0x50;
-_HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x0;
-_STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x400;
-_BSS_START_ADDR = DEFINED(_BSS_START_ADDR) ? _BSS_START_ADDR : 0xF800;
-SECTIONS
-{
-  .vectors.reset 0x0 : { KEEP (*(.vectors.reset)) } = 0
-  .vectors.sw_exception 0x8 : { KEEP (*(.vectors.sw_exception)) } = 0
-  .vectors.interrupt 0x10 : { KEEP (*(.vectors.interrupt)) } = 0
-  .vectors.debug_sw_break 0x18 : { KEEP (*(.vectors.debug_sw_break)) } = 0
-  .vectors.hw_exception 0x20 : { KEEP (*(.vectors.hw_exception)) } = 0
-  . = _TEXT_START_ADDR;
-   _ftext  =  .;
-  .text : {
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-  }
-   _etext  =  .;
-  .init : { KEEP (*(.init))	} =0
-  .fini : { KEEP (*(.fini))	} =0
-  PROVIDE (__CTOR_LIST__ = .);
-  PROVIDE (___CTOR_LIST__ = .);
-  .ctors   :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-  PROVIDE (__CTOR_END__ = .);
-  PROVIDE (___CTOR_END__ = .);
-  PROVIDE (__DTOR_LIST__ = .);
-  PROVIDE (___DTOR_LIST__ = .);
-   .dtors         :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-  PROVIDE (__DTOR_END__ = .);
-  PROVIDE (___DTOR_END__ = .);
-   . = ALIGN(4);
-    _frodata = . ;
-  .rodata : {
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-    CONSTRUCTORS; /* Is this needed? */
-  }
-   _erodata = .;
-  /* Alignments by 8 to ensure that _SDA2_BASE_ on a word boundary */
-  /* Note that .sdata2 and .sbss2 must be contiguous */
-  . = ALIGN(8);
-   _ssrw = .;
-  .sdata2 : {
-    *(.sdata2)
-    *(.sdata2.*)
-    *(.gnu.linkonce.s2.*)
-  }
-  . = ALIGN(4);
-  .sbss2 : {
-    PROVIDE (__sbss2_start = .);
-    *(.sbss2)
-    *(.sbss2.*)
-    *(.gnu.linkonce.sb2.*)
-    PROVIDE (__sbss2_end = .);
-  }
-  . = ALIGN(8);
-   _essrw = .;
-   _ssrw_size = _essrw - _ssrw;
-   PROVIDE (_SDA2_BASE_ = _ssrw + (_ssrw_size / 2 ));
-   . = ALIGN(4);
-   _fdata = .;
-  .data : {
-    *(.data)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS; /* Is this needed? */
-  }
-   _edata = . ;
-   /* Added to handle pic code */
-  .got : {
-    *(.got)
-  }
-  .got1 : {
-    *(.got1)
-  }
-  .got2 : {
-    *(.got2)
-  }
-  /* Added by Sathya to handle C++ exceptions */
-  .eh_frame : {
-    *(.eh_frame)
-  }
-  .jcr : {
-    *(.jcr)
-  }
-  .gcc_except_table : {
-    *(.gcc_except_table)
-  }
-  /* Alignments by 8 to ensure that _SDA_BASE_ on a word boundary */
-  /* Note that .sdata and .sbss must be contiguous */
-  . = ALIGN(8);
-   _ssro = .;
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-  .sbss : {
-    PROVIDE (__sbss_start = .);
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    PROVIDE (__sbss_end = .);
-  }
-  . = ALIGN(8);
-   _essro = .;
-   _ssro_size = _essro - _ssro;
-  PROVIDE (_SDA_BASE_ = _ssro + (_ssro_size / 2 ));
-   . = _BSS_START_ADDR;
-   . = ALIGN(4);
-   _fbss = .;
-  .bss : {
-    PROVIDE (__bss_start = .);
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-    PROVIDE (__bss_end = .);
-  }
-   . = ALIGN(4);
-  .heap : {
-     _heap = .;
-     _heap_start = .;
-     . += _HEAP_SIZE;
-     _heap_end = .;
-  }
-  _end = .;
-   . = ALIGN(4);
-   . = 0xFFF0;
-  .stack : {
-  /*
-     _stack_end = .;
-     . += _STACK_SIZE;
-     . = ALIGN(8);
-     _stack = .;
-     _end = .;
-   */
-   _stack_end = .;
-   _stack = .;
-  }
-  .tdata : {
-    *(.tdata)
-    *(.tdata.*)
-    *(.gnu.linkonce.td.*)
-  }
-  .tbss : {
-    *(.tbss)
-    *(.tbss.*)
-    *(.gnu.linkonce.tb.*)
-  }
-}
diff --git a/firmware/microblaze/usrp2p/bootloader_utils.c b/firmware/microblaze/usrp2p/bootloader_utils.c
deleted file mode 100644
index 379c5f957..000000000
--- a/firmware/microblaze/usrp2p/bootloader_utils.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2010 Ettus Research LLC
- *
- */
-
-//contains routines for loading programs from Flash. depends on Flash libraries.
-//also contains routines for reading / writing EEPROM flags for the bootloader
-#include <stdbool.h>
-#include <string.h>
-#include <bootloader_utils.h>
-#include <spi_flash.h>
-#include <memory_map.h>
-#include <nonstdio.h>
-
-int is_valid_fpga_image(uint32_t addr) {
-//	printf("is_valid_fpga_image(): starting with addr=%x...\n", addr);
-	uint8_t imgbuf[64];
-	spi_flash_read(addr, 64, imgbuf);
-	//we're just looking for leading 0xFF padding, followed by the sync bytes 0xAA 0x99
-	for(size_t i = 0; i<63; i++) {
-		if(imgbuf[i] == 0xFF) continue;
-		if(imgbuf[i] == 0xAA && imgbuf[i+1] == 0x99) {
-			//printf("is_valid_fpga_image(): found valid FPGA image\n");
-			return 1;
-		}
-	}
-	
-	return 0;
-}
-
-int is_valid_fw_image(uint32_t addr) {
-	static const uint8_t fwheader[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x80, 0x70}; //just lookin for a jump to anywhere located at the reset vector
-	//printf("is_valid_fw_image(): starting with addr=%x...\n", addr);
-	uint8_t buf[12];
-	spi_flash_read(addr, 6, buf);
-	//printf("is_valid_fw_image(): read ");
-	//for(int i = 0; i < 5; i++) printf("%x ", buf[i]);
-	//printf("\n");
-	return memcmp(buf, fwheader, 6) == 0;
-}
-
-void start_program(void)
-{
-	//ignoring the addr now
-	//all this does is tap that register
-	*((volatile uint32_t *) SR_ADDR_BLDRDONE) = 1;
-}
diff --git a/firmware/microblaze/usrp2p/bootloader_utils.h b/firmware/microblaze/usrp2p/bootloader_utils.h
deleted file mode 100644
index 0f49ae6cd..000000000
--- a/firmware/microblaze/usrp2p/bootloader_utils.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2010 Ettus Research LLC
- *
- */
-
-#include <stdint.h>
-
-//we're working in bytes and byte addresses so we can run the same code with Flash chips of different sector sizes.
-//it's really 1463736, but rounded up to 1.5MB
-#define FPGA_IMAGE_SIZE_BYTES 1572864
-//16K
-#define FW_IMAGE_SIZE_BYTES 0x3fff
-
-#define SAFE_FPGA_IMAGE_LOCATION_ADDR 0x00000000
-#define SAFE_FW_IMAGE_LOCATION_ADDR 0x003F0000
-#define PROD_FPGA_IMAGE_LOCATION_ADDR 0x00180000
-#define PROD_FW_IMAGE_LOCATION_ADDR 0x00300000
-
-int is_valid_fpga_image(uint32_t addr);
-int is_valid_fw_image(uint32_t addr);
-void start_program(void);
diff --git a/firmware/microblaze/usrp2p/eth_phy.h b/firmware/microblaze/usrp2p/eth_phy.h
deleted file mode 100644
index d233e96e8..000000000
--- a/firmware/microblaze/usrp2p/eth_phy.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* Much of this was extracted from the Linux e1000_hw.h file */
-
-#ifndef INCLUDED_ETH_PHY_H
-#define INCLUDED_ETH_PHY_H
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-
-#define PHY_CTRL         0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Regiser */
-#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
-
-/* PHY 1000 MII Register additions in ET1011C */
-#define PHY_INT_MASK     24
-#define PHY_INT_STATUS   25
-#define PHY_PHY_STATUS   26
-#define PHY_LED2         28
-
-/* Bit definitions for some of the registers above */
-
-/* PHY Control Register (PHY_CTRL) */
-#define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
-#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
-#define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN       0x0800  /* Power down */
-#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
-
-/* PHY Status Register (PHY_STATUS) */
-#define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
-#define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
-
-/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */
-#define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
-#define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
-#define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
-
-/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
-
-/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */
-#define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
-
-/* Next Page TX Register (PHY_NEXT_PAGE_TX) */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
-                                    * of different NP
-                                    */
-#define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                    * 0 = cannot comply with msg
-                                    */
-#define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow
-                                    * 0 = sending last NP
-                                    */
-
-/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
-                                       * of different NP
-                                       */
-#define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
-                                       * 0 = cannot comply with msg
-                                       */
-#define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
-                                        * 0 = sending last NP
-                                        */
-
-/* 1000BASE-T Control Register (PHY_1000T_CTRL) */
-#define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
-#define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
-                                        /* 0=DTE device */
-#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
-                                        /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
-                                        /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
-
-/* 1000BASE-T Status Register (PHY_1000T_STATUS) */
-#define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
-#define SR_1000T_REMOTE_RX_STATUS_SHIFT          12
-#define SR_1000T_LOCAL_RX_STATUS_SHIFT           13
-#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
-
-/* Extended Status Register (PHY_EXT_STATUS) */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-
-#define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) */
-
-#define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
-                                      /* (0=enable, 1=disable) */
-
-/* PHY Status Register (PHY_PHY_STATUS) */
-#define PHYSTAT_ASYMMETRIC   (1 << 0)
-#define PHYSTAT_PAUSE        (1 << 1)
-#define PHYSTAT_AUTONEG_EN   (1 << 2)
-#define PHYSTAT_COLLISION    (1 << 3)
-#define PHYSTAT_RXSTAT       (1 << 4)
-#define PHYSTAT_TXSTAT       (1 << 5)
-#define PHYSTAT_LINK         (1 << 6)
-#define PHYSTAT_DUPLEX       (1 << 7)
-#define PHYSTAT_SPEED_MASK   ((1 << 8) | (1 << 9))
-#define PHYSTAT_SPEED_1000   (1 << 9)
-#define PHYSTAT_SPEED_100    (1 << 8)
-#define PHYSTAT_SPEED_10     0
-#define PHYSTAT_POLARITY     (1 << 10)
-#define PHYSTAT_MDIX         (1 << 11)
-#define PHYSTAT_AUTONEG_STAT (1 << 12)
-#define PHYSTAT_STANDBY      (1 << 13)
-
-/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */
-#define PHY_INT_ENABLE         (1 << 0)
-#define PHY_INT_DOWNSHIFT      (1 << 1)
-#define PHY_INT_LINK_STATUS_CHANGE  (1 << 2)
-#define PHY_INT_RX_STATUS_CHANGE (1 << 3)
-#define PHY_INT_FIFO_ERROR     (1 << 4)
-#define PHY_INT_ERR_CTR_FULL   (1 << 5)
-#define PHY_INT_NEXT_PAGE_RX   (1 << 6)
-#define PHY_INT_CRC_ERROR      (1 << 7)
-#define PHY_INT_AUTONEG_STATUS_CHANGE (1 << 8)
-#define PHY_INT_MDIO_SYNC_LOST (1 << 9)
-#define PHY_INT_TDR_IP_PHONE   (1 << 10)
-
-/* PHY LED status register 2 (used for controlling link LED for activity light) */
-#define PHY_LED_TXRX_LSB           12
-#define PHY_LED_LINK_LSB           8
-#define PHY_LED_100_LSB            4
-#define PHY_LED_1000_LSB           0
-
-#define LED_1000                   0
-#define LED_100_TX                 1
-#define LED_10                     2
-#define LED_1000_ON_100_BLINK      3
-#define LED_LINK                   4
-#define LED_TX                     5
-#define LED_RX                     6
-#define LED_ACTIVITY               7
-#define LED_FULLDUPLEX             8
-#define LED_COLLISION              9
-#define LED_LINK_ON_ACTIVITY_BLINK 10
-#define LED_LINK_ON_RX_BLINK       11
-#define LED_FULL_DUPLEX_ON_COLLISION_BLINK 12
-#define LED_BLINK                  13
-#define LED_ON                     14
-#define LED_OFF                    15
-
-
-#endif /* INCLUDED_ETH_PHY_H */
diff --git a/firmware/microblaze/usrp2p/ethernet.c b/firmware/microblaze/usrp2p/ethernet.c
deleted file mode 100644
index 03891f959..000000000
--- a/firmware/microblaze/usrp2p/ethernet.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-//Changes for USRP2P: status registers different (ethernet.h)
-
-#include "ethernet.h"
-#include "memory_map.h"
-#include "eth_phy.h"
-#include <eth_mac.h>
-#include <eth_mac_regs.h>
-#include <pic.h>
-#include <hal_io.h>
-#include <nonstdio.h>
-#include <stdbool.h>
-#include <i2c.h>
-#include "usrp2/fw_common.h"
-
-#define VERBOSE 0
-
-static ethernet_t ed_state;
-static ethernet_link_changed_callback_t ed_callback = 0;
-
-void 
-ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback)
-{
-  ed_callback = new_callback;
-}
-
-
-static void
-ed_set_mac_speed(int speed)
-{
-  printf("Speed set to %d\n",speed);
-  /*
-  switch(speed){
-  case 10:
-    eth_mac->speed = 1;
-    break;
-  case 100:
-    eth_mac->speed = 2;
-    break;
-  case 1000:
-    eth_mac->speed = 4;
-    break;
-  default:
-    break;
-  }
-  */
-}
-
-static void
-ed_link_up(int speed)
-{
-  // putstr("ed_link_up: "); puthex16_nl(speed);
-
-  ed_set_mac_speed(speed);
-
-	//turn on link LED for USRP2P
-	hal_set_leds(LED_RJ45, LED_RJ45);
-
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(speed);
-}
-
-static void
-ed_link_down(void)
-{
-  // putstr("ed_link_down\n");
-
-	//turn off link LED for USRP2P
-	hal_set_leds(0, LED_RJ45);
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(0);
-}
-
-
-static void
-ed_link_speed_change(int speed)
-{
-  ed_link_down();
-  ed_link_up(speed);
-}
-
-static void
-print_flow_control(int flow_control)
-{
-  static const char *flow_control_msg[4] = {
-    "NONE", "WE_TX", "WE_RX", "SYMMETRIC"
-  };
-  putstr("ethernet flow control: ");
-  puts(flow_control_msg[flow_control & 0x3]);
-}
-
-static void
-check_flow_control_resolution(void)
-{
-  static const unsigned char table[16] = {
-    // index = {local_asm, local_pause, partner_asm, partner_pause}
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_NONE,
-    FC_NONE,  FC_SYMM,  FC_NONE,  FC_SYMM,
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_WE_TX,
-    FC_NONE,  FC_SYMM,  FC_WE_RX, FC_SYMM
-  };
-
-  int us = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  int lp = eth_mac_miim_read(PHY_LP_ABILITY);
-  int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3);
-  ed_state.flow_control = table[index];
-
-  if (1)
-    print_flow_control(ed_state.flow_control);
-}
-
-/*
- * Read the PHY state register to determine link state and speed
- */
-static void
-ed_check_phy_state(void)
-{
-  int phystat = eth_mac_miim_read(PHY_PHY_STATUS);
-  eth_link_state_t new_state = LS_UNKNOWN;
-  int new_speed = S_UNKNOWN;
-
-  if (VERBOSE){
-    putstr("PHYSTAT: ");
-    puthex16_nl(phystat);
-  }
-
-  if (phystat & PHYSTAT_LINK){		// link's up
-    if (VERBOSE)
-      puts("  LINK_GOOD");
-
-    new_state = LS_UP;
-    switch (phystat & PHYSTAT_SPEED_MASK){
-    case PHYSTAT_SPEED_10:
-      new_speed = 10;
-      break;
-      
-    case PHYSTAT_SPEED_100:
-      new_speed = 100;
-      break;
-      
-    case PHYSTAT_SPEED_1000:
-      new_speed = 1000;
-      break;
-
-    default:
-      new_speed = S_UNKNOWN;
-      break;
-    }
-
-    check_flow_control_resolution();
-  }
-  else {				// link's down
-    if (VERBOSE)
-      puts("  NOT LINK_GOOD");
-    
-    new_state = LS_DOWN;
-    new_speed = S_UNKNOWN;
-  }
-
-  if (new_state != ed_state.link_state){
-    ed_state.link_state = new_state;		// remember new state
-    if (new_state == LS_UP)
-      ed_link_up(new_speed);
-    else if (new_state == LS_DOWN)
-      ed_link_down();
-  }
-  else if (new_state == LS_UP && new_speed != ed_state.link_speed){
-    ed_state.link_speed = new_speed;		// remember new speed
-    ed_link_speed_change(new_speed);
-  }
-}
-
-/*
- * This is fired when the ethernet PHY state changes
- */
-static void
-eth_phy_irq_handler(unsigned irq)
-{
-  ed_check_phy_state();
-  eth_mac_miim_read(PHY_INT_STATUS);
-//  eth_mac_miim_write(PHY_INT_CLEAR, ~0);	// clear all ints
-}
-
-void
-ethernet_init(void)
-{
-  eth_mac_init(ethernet_mac_addr());
-
-  ed_state.link_state = LS_UNKNOWN;
-  ed_state.link_speed = S_UNKNOWN;
-
-  // initialize MAC registers
-  //  eth_mac->tx_hwmark = 0x1e;
-  //eth_mac->tx_lwmark = 0x19;
-
-  //eth_mac->crc_chk_en = 1;
-  //eth_mac->rx_max_length = 2048;
-
-  // configure PAUSE frame stuff
-  //eth_mac->tx_pause_en = 1;		// pay attn to pause frames sent to us
-
-  //eth_mac->pause_quanta_set = 38;	// a bit more than 1 max frame 16kb/512 + fudge
-  //eth_mac->pause_frame_send_en = 1;	// enable sending pause frames
-
-
-  // setup PHY to interrupt on changes
-
-  unsigned mask =
-    (PHY_INT_ENABLE       //master interrupt enable
-     | PHY_INT_LINK_STATUS_CHANGE
-     | PHY_INT_RX_STATUS_CHANGE
-     );
-
-  eth_mac_miim_read(PHY_INT_STATUS); //clear interrupts
-  eth_mac_miim_write(PHY_INT_MASK, mask);	// enable the ones we want
-
-	//set the LED behavior to activity instead of link
-	unsigned led = (LED_ACTIVITY << PHY_LED_LINK_LSB) | (LED_TX << PHY_LED_TXRX_LSB);
-	eth_mac_miim_write(PHY_LED2, led);
-
-  pic_register_handler(IRQ_PHY, eth_phy_irq_handler);
-
-  // Advertise our flow control configuation.
-  //
-  // We and the link partner each specify two bits in the base page
-  // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR.
-  // The bits say what a device is "willing" to do, not what may actually
-  // happen as a result of the negotiation.  There are 4 cases:
-  //
-  // PAUSE  ASM_DIR
-  //
-  //  0        0        I have no flow control capability.
-  //
-  //  1        0        I both assert and respond to flow control.
-  //
-  //  0        1        I assert flow control, but cannot respond.  That is,
-  //                    I want to be able to send PAUSE frames, but will ignore any
-  //		 	you send to me.  (This is our configuration.)
-  //
-  //  1        1        I can both assert and respond to flow control AND I am willing
-  //                    to operate symmetrically OR asymmetrically in EITHER direction.
-  //                    (We hope the link partner advertises this, otherwise we don't
-  //			get what we want.)
-
-  int t = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR);
-  t |= NWAY_AR_ASM_DIR;
-
-  // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex
-  t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS);
-
-  eth_mac_miim_write(PHY_AUTONEG_ADV, t);
-  int r = eth_mac_miim_read(PHY_AUTONEG_ADV);  		// DEBUG, read back
-  if (t != r){
-    printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r);
-  }
-
-  // Restart autonegotation.  
-  // We want to ensure that we're advertising our PAUSE capabilities.
-  t = eth_mac_miim_read(PHY_CTRL);
-  eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG);
-}
-
-int
-ethernet_check_errors(void)
-{
-  // these registers are reset when read
-  
-  int	r = 0;
-  /*
-  if (eth_mac_read_rmon(0x05) != 0)
-    r |= RME_RX_CRC;
-  if (eth_mac_read_rmon(0x06) != 0)
-    r |= RME_RX_FIFO_FULL;
-  if (eth_mac_read_rmon(0x07) != 0)
-    r |= RME_RX_2SHORT_2LONG;
-  
-  if (eth_mac_read_rmon(0x25) != 0)
-    r |= RME_TX_JAM_DROP;
-  if (eth_mac_read_rmon(0x26) != 0)
-    r |= RME_TX_FIFO_UNDER;
-  if (eth_mac_read_rmon(0x27) != 0)
-    r |= RME_TX_FIFO_OVER;
-  */
-  return r;
-}
diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h
deleted file mode 100644
index 6f5c577e6..000000000
--- a/firmware/microblaze/usrp2p/memory_map.h
+++ /dev/null
@@ -1,718 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2007,2008,2009 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_MEMORY_MAP_H
-#define INCLUDED_MEMORY_MAP_H
-
-#include <stdint.h>
-
-
-#define MASTER_CLK_RATE        100000000		// 100 MHz
-
-
-////////////////////////////////////////////////////////////////
-//
-//         Memory map for embedded wishbone bus
-//
-////////////////////////////////////////////////////////////////
-
-////////////////////////////////////////////////////////////////
-// Boot RAM, Slave 0
-
-#define BOOTRAM_BASE 0x0000
-
-
-////////////////////////////////////////////////////////////////
-// Buffer Pool RAM, Slave 1
-//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
-// The control register is in Slave 7, Settings Bus.
-
-#define BUFFER_POOL_RAM_BASE 0x4000
-
-#define BP_NLINES	   0x0200	// number of 32-bit lines in a buffer
-
-#define buffer_pool_ram \
-  ((uint32_t *) BUFFER_POOL_RAM_BASE)
-
-#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES])
-
-
-/////////////////////////////////////////////////////
-// SPI Core, Slave 2.  See core docs for more info
-#define SPI_BASE 0x6000   // Base address (16-bit) is base peripheral addr
-
-typedef struct {
-  volatile uint32_t	txrx0;
-  volatile uint32_t	txrx1;
-  volatile uint32_t	txrx2;
-  volatile uint32_t	txrx3;
-  volatile uint32_t	ctrl;
-  volatile uint32_t	div;
-  volatile uint32_t	ss;
-} spi_regs_t;
-
-#define spi_regs ((spi_regs_t *) SPI_BASE)
-
-
-// Masks for controlling different peripherals
-#define SPI_SS_AD9510    1
-#define SPI_SS_AD9777    2
-#define SPI_SS_RX_DAC    4
-#define SPI_SS_RX_ADC    8
-#define SPI_SS_RX_DB    16
-#define SPI_SS_TX_DAC   32
-#define SPI_SS_TX_ADC   64
-#define SPI_SS_TX_DB   128
-#define SPI_SS_ADS62P44 256
-
-// Masks for different parts of CTRL reg
-#define SPI_CTRL_ASS      (1<<13)
-#define SPI_CTRL_IE       (1<<12)
-#define SPI_CTRL_LSB      (1<<11)
-#define SPI_CTRL_TXNEG    (1<<10)
-#define SPI_CTRL_RXNEG    (1<< 9)
-#define SPI_CTRL_GO_BSY   (1<< 8)
-#define SPI_CTRL_CHAR_LEN_MASK 0x7F
-
-////////////////////////////////////////////////
-// I2C, Slave 3
-// See Wishbone I2C-Master Core Specification.
-
-#define I2C_BASE 0x6100
-
-typedef struct {
-  volatile uint32_t  prescaler_lo;	// r/w
-  volatile uint32_t  prescaler_hi;	// r/w
-  volatile uint32_t  ctrl;		// r/w
-  volatile uint32_t  data;		// wr = transmit reg; rd = receive reg
-  volatile uint32_t  cmd_status;	// wr = command reg;  rd = status reg
-} i2c_regs_t;
-
-#define i2c_regs ((i2c_regs_t *) I2C_BASE)
-
-#define	I2C_CTRL_EN	(1 << 7)	// core enable
-#define	I2C_CTRL_IE	(1 << 6)	// interrupt enable
-
-//
-// STA, STO, RD, WR, and IACK bits are cleared automatically
-//
-#define	I2C_CMD_START	(1 << 7)	// generate (repeated) start condition
-#define I2C_CMD_STOP	(1 << 6)	// generate stop condition
-#define	I2C_CMD_RD	(1 << 5)	// read from slave
-#define I2C_CMD_WR	(1 << 4)	// write to slave
-#define	I2C_CMD_NACK	(1 << 3)	// when a rcvr, send ACK (ACK=0) or NACK (ACK=1)
-#define I2C_CMD_RSVD_2	(1 << 2)	// reserved
-#define	I2C_CMD_RSVD_1	(1 << 1)	// reserved
-#define I2C_CMD_IACK	(1 << 0)	// set to clear pending interrupt
-
-#define I2C_ST_RXACK	(1 << 7)	// Received acknowledgement from slave (1 = NAK, 0 = ACK)
-#define	I2C_ST_BUSY	(1 << 6)	// 1 after START signal detected; 0 after STOP signal detected
-#define	I2C_ST_AL	(1 << 5)	// Arbitration lost.  1 when core lost arbitration
-#define	I2C_ST_RSVD_4	(1 << 4)	// reserved
-#define	I2C_ST_RSVD_3	(1 << 3)	// reserved
-#define	I2C_ST_RSVD_2	(1 << 2)	// reserved
-#define I2C_ST_TIP	(1 << 1)	// Transfer-in-progress
-#define	I2C_ST_IP	(1 << 0)	// Interrupt pending
-
-
-////////////////////////////////////////////////
-// GPIO, Slave 4
-//
-// These go to the daughterboard i/o pins
-
-#define GPIO_BASE 0x6200
-
-typedef struct {
-  volatile uint32_t	io;	  // tx data in high 16, rx in low 16
-  volatile uint32_t     ddr;      // 32 bits, 1 means output. tx in high 16, rx in low 16
-  volatile uint32_t	tx_sel;   // 16 2-bit fields select which source goes to TX DB
-  volatile uint32_t	rx_sel;   // 16 2-bit fields select which source goes to RX DB
-} gpio_regs_t;
-
-// each 2-bit sel field is layed out this way
-#define GPIO_SEL_SW	   0 // if pin is an output, set by software in the io reg
-#define	GPIO_SEL_ATR	   1 // if pin is an output, set by ATR logic
-#define	GPIO_SEL_DEBUG_0   2 // if pin is an output, debug lines from FPGA fabric
-#define	GPIO_SEL_DEBUG_1   3 // if pin is an output, debug lines from FPGA fabric
-
-#define gpio_base ((gpio_regs_t *) GPIO_BASE)
-
-///////////////////////////////////////////////////
-// Buffer Pool Status, Slave 5
-//
-// The buffers themselves are located in Slave 1, Buffer Pool RAM.
-// The status registers are in Slave 5, Buffer Pool Status.
-// The control register is in Slave 7, Settings Bus.
-
-#define BUFFER_POOL_STATUS_BASE 0x6300
-
-typedef struct {
-  volatile uint32_t _padding[8];
-  volatile uint32_t status;
-  volatile uint32_t hw_config;	         // see below
-  volatile uint32_t dummy[3];
-  volatile uint32_t irqs;
-  volatile uint32_t pri_enc_bp_status;
-  volatile uint32_t cycle_count;
-} buffer_pool_status_t;
-
-#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE)
-
-#define BUTTON_PUSHED ((buffer_pool_status->irqs & PIC_BUTTON) ? 0 : 1)
-
-// The hw_config register
-
-#define	HWC_SIMULATION		0x80000000
-#define	HWC_WB_CLK_DIV_MASK	0x0000000f
-
-/*!
- * \brief return non-zero if we're running under the simulator
- */
-inline static int
-hwconfig_simulation_p(void)
-{
-  return buffer_pool_status->hw_config & HWC_SIMULATION;
-}
-
-/*!
- * \brief Return Wishbone Clock divisor.
- * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor.
- */
-inline static int
-hwconfig_wishbone_divisor(void)
-{
-  return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK;
-}
-
-///////////////////////////////////////////////////
-// Ethernet Core, Slave 6
-
-#define ETH_BASE 0x6400
-
-#include "eth_mac_regs.h"
-
-#define eth_mac ((eth_mac_regs_t *) ETH_BASE)
-
-////////////////////////////////////////////////////
-// Settings Bus, Slave #7, Not Byte Addressable!
-//
-// Output-only from processor point-of-view.
-// 1KB of address space (== 256 32-bit write-only regs)
-
-
-#define MISC_OUTPUT_BASE        0x5000
-
-#define SR_MISC 0
-#define SR_TX_PROT_ENG 32
-#define SR_RX_PROT_ENG 48
-#define SR_BUFFER_POOL_CTRL 64
-#define SR_UDP_SM 96
-#define SR_TX_DSP 208
-#define SR_TX_CTRL 224
-#define SR_RX_DSP 160
-#define SR_RX_CTRL 176
-#define SR_TIME64 192
-#define SR_SIMTIMER 198
-#define SR_LAST 255
-
-#define	_SR_ADDR(sr)	(MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t))
-
-#define SR_ADDR_BLDRDONE _SR_ADDR(5)
-
-// --- buffer pool control regs ---
-
-typedef struct {
-  volatile uint32_t misc_ctrl;
-  volatile uint32_t ip_addr;
-  volatile uint32_t ctrl_ports; //ctrl (low 16) other (high 16)
-  volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16)
-  volatile uint32_t cpu_out_ctrl;
-  volatile uint32_t cpu_inp_ctrl;
-} buffer_pool_ctrl_t;
-
-#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) _SR_ADDR(SR_BUFFER_POOL_CTRL))
-
-// --- misc outputs ---
-
-typedef struct {
-  volatile uint32_t	clk_ctrl;
-  volatile uint32_t	serdes_ctrl;
-  volatile uint32_t	adc_ctrl;
-  volatile uint32_t	leds;
-  volatile uint32_t	phy_ctrl;	// LSB is reset line to eth phy
-  volatile uint32_t	debug_mux_ctrl;
-  volatile uint32_t     ram_page;       // FIXME should go somewhere else...
-  volatile uint32_t     flush_icache;   // Flush the icache
-  volatile uint32_t     led_src;        // HW or SW control for LEDs
-} output_regs_t;
-
-#define CLK_RESET  (1<<4)
-#define CLK_ENABLE (1<<3) | (1<<2)
-#define CLK_SEL    (1<<1) | (1<<0)
-
-#define SERDES_ENABLE 8
-#define SERDES_PRBSEN 4
-#define SERDES_LOOPEN 2
-#define SERDES_RXEN   1
-
-#define	ADC_CTRL_ON	0x0F
-#define	ADC_CTRL_OFF	0x00
-
-// crazy order that matches the labels on the case
-
-#define	LED_A		(1 << 2)
-#define	LED_B		(1 << 0)
-#define	LED_E		(1 << 3)
-#define	LED_D		(1 << 1)
-#define	LED_C		(1 << 4)
-//      LED_F		// controlled by CPLD
-#define	LED_RJ45	(1 << 5)
-
-#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE)
-
-// --- udp tx regs ---
-
-typedef struct {
-  // Bits 19:16 are control info; bits 15:0 are data (see below)
-  // First two words are unused.
-  volatile uint32_t _nope[2];
-  //--- ethernet header - 14 bytes---
-  volatile struct{
-    uint32_t mac_dst_0_1; //word 2
-    uint32_t mac_dst_2_3;
-    uint32_t mac_dst_4_5;
-    uint32_t mac_src_0_1;
-    uint32_t mac_src_2_3;
-    uint32_t mac_src_4_5;
-    uint32_t ether_type; //word 8
-  } eth_hdr;
-  //--- ip header - 20 bytes ---
-  volatile struct{
-    uint32_t ver_ihl_tos; //word 9
-    uint32_t total_length;
-    uint32_t identification;
-    uint32_t flags_frag_off;
-    uint32_t ttl_proto;
-    uint32_t checksum;
-    uint32_t src_addr_high;
-    uint32_t src_addr_low;
-    uint32_t dst_addr_high;
-    uint32_t dst_addr_low; //word 18
-  } ip_hdr;
-  //--- udp header - 8 bytes ---
-  volatile struct{
-    uint32_t src_port; //word 19
-    uint32_t dst_port;
-    uint32_t length;
-    uint32_t checksum; //word 22
-  } udp_hdr;
-  volatile uint32_t _pad[1];
-  volatile uint32_t dsp0_port;
-  volatile uint32_t err0_port;
-  volatile uint32_t dsp1_port;
-  volatile uint32_t err1_port;
-} sr_udp_sm_t;
-
-// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive)
-
-// Insert a UDP source port from the table
-#define UDP_SM_INS_UDP_SRC_PORT     (1 << 21)
-
-// Insert a UDP dest port from the table
-#define UDP_SM_INS_UDP_DST_PORT     (1 << 20)
-
-// This is the last word of the header
-#define	UDP_SM_LAST_WORD		(1 << 19)
-
-// Insert IP header checksum here.  Data is the xor of 16'hFFFF and
-// the values written into regs 9-13 and 15-18.
-#define	UDP_SM_INS_IP_HDR_CHKSUM	(1 << 18)
-
-// Insert IP Length here (data ignored)
-#define	UDP_SM_INS_IP_LEN		(1 << 17)
-
-// Insert UDP Length here (data ignore)
-#define	UDP_SM_INS_UDP_LEN		(1 << 16)
-
-#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM))
-
-// --- dsp tx regs ---
-
-#define MIN_CIC_INTERP	1
-#define	MAX_CIC_INTERP  128
-
-typedef struct {
-  volatile uint32_t     num_chan;
-  volatile uint32_t     clear_state;	// clears out state machine, fifos,
-  volatile uint32_t     report_sid;
-  volatile uint32_t     policy;
-  volatile uint32_t     cyc_per_up;
-  volatile uint32_t     packets_per_up;
-} sr_tx_ctrl_t;
-
-#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL))
-
-typedef struct {
-  volatile int32_t	freq;
-  volatile uint32_t	scale_iq;	// {scale_i,scale_q}
-  volatile uint32_t     interp_rate;
-  volatile uint32_t     _padding0;      // padding for the tx_mux
-                                        //   NOT freq, scale, interp
-  /*!
-   * \brief output mux configuration.
-   *
-   * <pre>
-   *     3                   2                   1                       
-   *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   *  +-------------------------------+-------+-------+-------+-------+
-   *  |                                               | DAC1  |  DAC0 |
-   *  +-------------------------------+-------+-------+-------+-------+
-   * 
-   *  There are N DUCs (1 now) with complex inputs and outputs.
-   *  There are two DACs.
-   * 
-   *  Each 4-bit DACx field specifies the source for the DAC
-   *  Each subfield is coded like this: 
-   * 
-   *     3 2 1 0
-   *    +-------+
-   *    |   N   |
-   *    +-------+
-   * 
-   *  N specifies which DUC output is connected to this DAC.
-   * 
-   *   N   which interp output
-   *  ---  -------------------
-   *   0   DUC 0 I
-   *   1   DUC 0 Q
-   *   2   DUC 1 I
-   *   3   DUC 1 Q
-   *   F   All Zeros
-   *   
-   * The default value is 0x10
-   * </pre>
-   */
-  volatile uint32_t	tx_mux;
-
-} dsp_tx_regs_t;
-  
-#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP))
-
-// --- VITA RX CTRL regs ---
-typedef struct {
-  // The following 3 are logically a single command register.
-  // They are clocked into the underlying fifo when time_ticks is written.
-  volatile uint32_t	cmd;		// {now, chain, num_samples(30)
-  volatile uint32_t	time_secs;
-  volatile uint32_t	time_ticks;
-
-  volatile uint32_t	clear_overrun;	// write anything to clear overrun
-  volatile uint32_t	vrt_header;	// word 0 of packet.  FPGA fills in packet counter
-  volatile uint32_t	vrt_stream_id;	// word 1 of packet. 
-  volatile uint32_t	vrt_trailer;
-  volatile uint32_t	nsamples_per_pkt;
-  volatile uint32_t     nchannels;      // 1 in basic case, up to 4 for vector sources
-  volatile uint32_t     pad[7];         // Make each structure 16 elements long
-} sr_rx_ctrl_t;
-
-#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL))
-
-// --- dsp rx regs ---
-#define	MIN_CIC_DECIM	1
-#define	MAX_CIC_DECIM   128
-
-typedef struct {
-  volatile int32_t	freq;
-  volatile uint32_t	scale_iq;	// {scale_i,scale_q}
-  volatile uint32_t     decim_rate;
-  volatile uint32_t     dcoffset_i;     // Bit 31 high sets fixed offset mode, using lower 14 bits,
-                                        // otherwise it is automatic 
-  volatile uint32_t     dcoffset_q;     // Bit 31 high sets fixed offset mode, using lower 14 bits
-
-  /*!
-   * \brief input mux configuration.
-   *
-   * This determines which ADC (or constant zero) is connected to 
-   * each DDC input.  There are N DDCs (1 now).  Each has two inputs.
-   *
-   * <pre>
-   * Mux value:
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   * |                                                       |Q0 |I0 |
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   *
-   * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
-   * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
-   *
-   * The default value is 0x4
-   * </pre>
-   */
-  volatile uint32_t     rx_mux;        // called adc_mux in dsp_core_rx.v
-
-  /*!
-   * \brief Streaming GPIO configuration
-   *
-   * This determines whether the LSBs of I and Q samples come from the DSP
-   * pipeline or from the io_rx GPIO pins.  To stream GPIO, one must first
-   * set the GPIO data direction register to have io_rx[15] and/or io_rx[14]
-   * configured as inputs.  The GPIO pins will be sampled at the time the
-   * remainder of the DSP sample is strobed into the RX sample FIFO.  There
-   * will be a decimation-dependent fixed time offset between the GPIO
-   * sample stream and the associated RF samples.
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   * |                           MBZ                             |Q|I|
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   *
-   * I         0=LSB comes from DSP pipeline (default)
-   *           1=LSB comes from io_rx[15]
-   * 
-   * Q         0=LSB comes from DSP pipeline (default)
-   *           1=LSB comes from io_rx[14]
-   */
-  volatile uint32_t gpio_stream_enable;
-
-} dsp_rx_regs_t;
-  
-#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP))
-
-// ----------------------------------------------------------------
-// VITA49 64 bit time (write only)
-  /*!
-   * \brief Time 64 flags
-   *
-   * <pre>
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-----------------------------------------------------------+-+-+
-   * |                                                           |S|P|
-   * +-----------------------------------------------------------+-+-+
-   *
-   * P - PPS edge selection (0=negedge, 1=posedge, default=0)
-   * S - Source (0=sma, 1=mimo, 0=default)
-   *
-   * </pre>
-   */
-typedef struct {
-  volatile uint32_t	secs;	// value to set absolute secs to on next PPS
-  volatile uint32_t	ticks;	// value to set absolute ticks to on next PPS
-  volatile uint32_t flags;  // flags - see chart above
-  volatile uint32_t imm;    // set immediate (0=latch on next pps, 1=latch immediate, default=0)
-} sr_time64_t;
-
-#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64))
-
-
-/* 
- * --- ethernet tx protocol engine regs (write only) ---
- *
- * These registers control the transmit portion of the ethernet
- * protocol engine (out of USRP2).  The protocol engine handles fifo
- * status and sequence number insertion in outgoing packets, and
- * automagically generates status packets when required to inform the
- * host of changes in fifo availability.
- *
- * All outgoing packets have their fifo_status field set to the number
- * of 32-bit lines of fifo available in the ethernet Rx fifo (see
- * usrp2_eth_packet.h).  Seqno's are set if FIXME, else 0.
- *
- * FIXME clean this up once we know how it's supposed to behave.
- */
-
-typedef struct {
-  volatile uint32_t  flags;	     // not yet fully defined (channel?)
-  volatile uint32_t  mac_dst0123;    // 4 bytes of destination mac addr
-  volatile uint32_t  mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr
-  volatile uint32_t  mac_src2345;    // 4 bytes of destination mac addr
-  volatile uint32_t  seqno;	     // Write to init seqno.  It autoincs on match
-} tx_proto_engine_regs_t;
-
-#define tx_proto_engine ((tx_proto_engine_regs_t *) _SR_ADDR(SR_TX_PROT_ENG))
-
-/*
- * --- ethernet rx protocol engine regs (write only) ---
- *
- * These registers control the receive portion of the ethernet
- * protocol engine (into USRP2).  The protocol engine offloads common
- * packet inspection operations so that firmware has less to do on
- * "fast path" packets.
- *
- * The registers define conditions which must be matched for a packet
- * to be considered a "fast path" packet.  If a received packet
- * matches the src and dst mac address, ethertype, flags field, and
- * expected seqno number it is considered a "fast path" packet, and
- * the expected seqno is updated.  If the packet fails to satisfy any
- * of the above conditions it's a "slow path" packet, and the
- * corresponding SLOWPATH flag will be set buffer_status register.
- */
-
-typedef struct {
-  volatile uint32_t  flags;	     // not yet fully defined (channel?)
-  volatile uint32_t  mac_dst0123;    // 4 bytes of destination mac addr
-  volatile uint32_t  mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr
-  volatile uint32_t  mac_src2345;    // 4 bytes of destination mac addr
-  volatile uint32_t  ethertype_pad;  // ethertype in high 16-bits
-} rx_proto_engine_regs_t;
-
-#define rx_proto_engine ((rx_proto_engine_regs_t *) _SR_ADDR(SR_RX_PROT_ENG))
-
-
-
-///////////////////////////////////////////////////
-// Simple Programmable Interrupt Controller, Slave 8
-
-#define PIC_BASE  0x6500
-
-// Interrupt request lines
-// Bit numbers (LSB == 0) that correpond to interrupts into PIC
-
-#define	IRQ_BUFFER	0	// buffer manager
-#define	IRQ_ONETIME	1
-#define	IRQ_SPI		2
-#define	IRQ_I2C		3
-#define	IRQ_PHY		4	// ethernet PHY
-#define	IRQ_UNDERRUN	5
-#define	IRQ_OVERRUN	6
-#define	IRQ_PPS		7	// pulse per second
-#define	IRQ_UART_RX	8
-#define	IRQ_UART_TX	9
-#define	IRQ_SERDES	10
-#define	IRQ_CLKSTATUS	11
-#define IRQ_PERIODIC    12
-#define IRQ_BUTTON	13
-
-#define IRQ_TO_MASK(x) (1 << (x))
-
-#define PIC_BUFFER_INT    IRQ_TO_MASK(IRQ_BUFFER)
-#define PIC_ONETIME_INT   IRQ_TO_MASK(IRQ_ONETIME)
-#define PIC_SPI_INT       IRQ_TO_MASK(IRQ_SPI)
-#define PIC_I2C_INT       IRQ_TO_MASK(IRQ_I2C)
-#define PIC_PHY_INT       IRQ_TO_MASK(IRQ_PHY)
-#define PIC_UNDERRUN_INT  IRQ_TO_MASK(IRQ_UNDERRUN)
-#define PIC_OVERRUN_INT   IRQ_TO_MASK(IRQ_OVERRUN)
-#define PIC_PPS_INT   	  IRQ_TO_MASK(IRQ_PPS)
-#define PIC_UART_RX_INT   IRQ_TO_MASK(IRQ_UART_RX)
-#define PIC_UART_TX_INT   IRQ_TO_MASK(IRQ_UART_TX)
-#define PIC_SERDES        IRQ_TO_MASK(IRQ_SERDES)
-#define PIC_CLKSTATUS     IRQ_TO_MASK(IRQ_CLKSTATUS)
-#define PIC_BUTTON				IRQ_TO_MASK(IRQ_BUTTON)
-
-typedef struct {
-  volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level
-  volatile uint32_t polarity;	 // mask: 1 -> rising edge
-  volatile uint32_t mask;	 // mask: 1 -> disabled
-  volatile uint32_t pending;	 // mask: 1 -> pending; write 1's to clear pending ints
-} pic_regs_t;
-
-#define pic_regs ((pic_regs_t *) PIC_BASE)
-
-// ----------------------------------------------------------------
-// WB_CLK_RATE is the time base for this
-typedef struct {
-  volatile uint32_t	onetime;   // Number of wb clk cycles till the onetime interrupt
-  volatile uint32_t	periodic;  // Repeat rate of periodic interrupt
-} sr_simple_timer_t;
-
-#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER))
-
-///////////////////////////////////////////////////
-// UNUSED, Slave 9
-
-///////////////////////////////////////////////////
-// UART, Slave 10
-
-#define UART_BASE  0x6700
-
-typedef struct {
-  //  All elements are 8 bits except for clkdiv (16), but we use uint32 to make 
-  //    the hardware for decoding easier
-  volatile uint32_t clkdiv;  // Set to 50e6 divided by baud rate (no x16 factor)
-  volatile uint32_t txlevel; // Number of spaces in the FIFO for writes
-  volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads
-  volatile uint32_t txchar;  // Write characters to be sent here
-  volatile uint32_t rxchar;  // Read received characters here
-  volatile uint32_t x[3]; //padding to reach 32B
-} uart_regs_t;
-
-#define uart_regs ((uart_regs_t *) UART_BASE)
-
-///////////////////////////////////////////////////
-// ATR Controller, Slave 11
-
-#define ATR_BASE  0x6800
-
-typedef struct {
-  volatile uint32_t	v[16];
-} atr_regs_t;
-
-#define	ATR_IDLE	0x0	// indicies into v
-#define ATR_TX		0x1
-#define	ATR_RX		0x2
-#define	ATR_FULL	0x3
-
-#define atr_regs ((atr_regs_t *) ATR_BASE)
-
-///////////////////////////////////////////////////
-// UNUSED, Slave 12
-
-///////////////////////////////////////////////////
-// ICAP, Slave 13
-
-#define ICAP_BASE 0x6A00
-typedef struct {
-  uint32_t icap; //only the lower 8 bits matter
-} icap_regs_t;
-
-#define icap_regs ((icap_regs_t *) ICAP_BASE)
-
-///////////////////////////////////////////////////
-// SPI Flash interface, Slave 14
-// Control register definitions are the same as SPI, so use SPI_CTRL_ASS, etc.
-// Peripheral mask not needed since bus is dedicated (CE held low)
-
-#define SPIF_BASE 0x6B00
-typedef struct {
-  volatile uint32_t	txrx0;
-  volatile uint32_t	txrx1;
-  volatile uint32_t	txrx2;
-  volatile uint32_t	txrx3;
-  volatile uint32_t	ctrl;
-  volatile uint32_t	div;
-  volatile uint32_t	ss;
-} spif_regs_t;
-
-#define spif_regs ((spif_regs_t *) SPIF_BASE)
-
-////////////////////////////////////////////////////////////////
-// Main RAM, Slave 15
-
-#define RAM_BASE 0x8000
-
-
-
-///////////////////////////////////////////////////
-#endif
-
diff --git a/firmware/microblaze/usrp2p/spi_flash.c b/firmware/microblaze/usrp2p/spi_flash.c
deleted file mode 100644
index 09b74a513..000000000
--- a/firmware/microblaze/usrp2p/spi_flash.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2009 Free Software Foundation, Inc.
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "spi_flash_private.h"
-//#include <stdlib.h>
-#include <nonstdio.h>
-
-uint32_t
-spi_flash_rdsr(void)
-{
-  return spif_transact(SPI_TXRX, SPI_SS_FLASH, RDSR_CMD << 8, 16, FLAGS) & 0xff;
-}
-
-static void
-spi_flash_write_enable(void)
-{
-//	spif_transact(SPI_TXONLY, SPI_SS_FLASH, (WRSR_CMD << 8) | 0x00, 16, FLAGS); //disable write protection bits
-  spif_transact(SPI_TXONLY, SPI_SS_FLASH, WREN_CMD, 8, FLAGS);
-}
-
-bool
-spi_flash_done_p(void)
-{
-  return (spi_flash_rdsr() & SR_WIP) == 0;
-}
-
-void
-spi_flash_wait(void)
-{
-  while (!spi_flash_done_p())
-    ;
-}
-
-void
-spi_flash_erase_sector_start(uint32_t flash_addr)
-{
-  //uprintf(UART_DEBUG, "spi_flash_erase_sector_start: addr = 0x%x\n", flash_addr);
-
-  spi_flash_wait();
-  spi_flash_write_enable();
-  spif_transact(SPI_TXONLY, SPI_SS_FLASH,
-		(SE_CMD << 24) | (flash_addr & 0x00ffffff),
-		32, FLAGS);
-}
-
-bool
-spi_flash_page_program_start(uint32_t flash_addr, size_t nbytes, const void *buf)
-{
-  if (nbytes == 0 || nbytes > SPI_FLASH_PAGE_SIZE)
-    return false;
-
-  uint32_t local_buf[SPI_FLASH_PAGE_SIZE / sizeof(uint32_t)];
-  memset(local_buf, 0xff, sizeof(local_buf));	// init to 0xff (nops when programming)
-  memcpy(local_buf, buf, nbytes);
-
-  spi_flash_wait();
-  spi_flash_write_enable();
-  
-  /*
-   * We explicitly control the slave select here (/S), so that we can
-   * do the entire write operation as a single transaction from
-   * device's point of view.  (The most our SPI peripheral can transfer
-   * in a single shot is 16 bytes.)
-   */
-  spif_wait();
-
-  spif_regs->ss = 0;
-  spif_regs->ctrl = FLAGS;	// ASS is now clear and no chip select is enabled.
-  
-  /* write PP_CMD, ADDR2, ADDR1, ADDR0 */
-
-  spif_regs->txrx0 = (PP_CMD << 24) | (flash_addr & 0x00ffffff);
-  spif_regs->ss = SPI_SS_FLASH;		// assert chip select
-  spif_regs->ctrl = FLAGS | LEN(4 * 8);		
-  spif_regs->ctrl = FLAGS | LEN(4 * 8) | SPI_CTRL_GO_BSY;
-  spif_wait();
-
-  /*  send 256 bytes total, 16 at a time */
-  for (size_t i = 0; i < 16; i++){
-    spif_regs->txrx3 = local_buf[i * 4 + 0];
-    spif_regs->txrx2 = local_buf[i * 4 + 1];
-    spif_regs->txrx1 = local_buf[i * 4 + 2];
-    spif_regs->txrx0 = local_buf[i * 4 + 3];
-    
-    spif_regs->ctrl = FLAGS | LEN(16 * 8);	// xfer 16 bytes
-    spif_regs->ctrl = FLAGS | LEN(16 * 8) | SPI_CTRL_GO_BSY;
-    spif_wait();
-  }
-  spif_regs->ss = 0;		// desassert chip select
-
-  return true;
-}
-
-void
-spi_flash_erase(uint32_t flash_addr, size_t nbytes)
-{
-  if (nbytes == 0)
-    return;
-
-  uint32_t first = round_down(flash_addr, spi_flash_sector_size());
-  uint32_t last  = round_down(flash_addr + nbytes - 1, spi_flash_sector_size());
-  
-  for (uint32_t s = first; s <= last; s += spi_flash_sector_size()){
-    spi_flash_erase_sector_start(s);
-  }
-  spi_flash_wait();
-}
-
-bool
-spi_flash_program(uint32_t flash_addr, size_t nbytes, const void *buf)
-{
-  //uprintf(UART_DEBUG, "\nspi_flash_program: addr = 0x%x, nbytes = %d\n", flash_addr, nbytes);
-
-  const unsigned char *p = (const unsigned char *) buf;
-  size_t n;
-
-  if (nbytes == 0)
-    return true;
-
-  uint32_t r = flash_addr % SPI_FLASH_PAGE_SIZE;
-  if (r){	/* do initial non-aligned page */
-    n = min(SPI_FLASH_PAGE_SIZE - r, nbytes);
-    spi_flash_page_program_start(flash_addr, n, p);
-    flash_addr += n;
-    p += n;
-    nbytes -= n;
-  }
-
-  while (nbytes > 0){
-    n = min(SPI_FLASH_PAGE_SIZE, nbytes);
-    spi_flash_page_program_start(flash_addr, n, p);
-    flash_addr += n;
-    p += n;
-    nbytes -= n;
-  }
-
-  spi_flash_wait();
-  return true;
-}
-
-void
-spi_flash_async_erase_start(spi_flash_async_state_t *s,
-			    uint32_t flash_addr, size_t nbytes)
-{
-  if (nbytes == 0){
-    s->first = s->last = s->current = 0;
-    return;
-  }
-
-  uint32_t first = round_down(flash_addr, spi_flash_sector_size());
-  uint32_t last  = round_down(flash_addr + nbytes - 1, spi_flash_sector_size());
-
-  s->first = first;
-  s->last = last;
-  s->current = first;
-
-  spi_flash_erase_sector_start(s->current);
-}
-
-bool
-spi_flash_async_erase_poll(spi_flash_async_state_t *s)
-{
-  if (!spi_flash_done_p())
-    return false;
-
-  //printf("%d/%d\n", s->current, s->last);
-
-  // The current sector erase has completed.  See if we're finished or
-  // if there's more to do.
-
-  if (s->current == s->last)	// we're done!
-    return true;
-
-  s->current += spi_flash_sector_size();
-  spi_flash_erase_sector_start(s->current);
-  return false;
-}
-
diff --git a/firmware/microblaze/usrp2p/spi_flash.h b/firmware/microblaze/usrp2p/spi_flash.h
deleted file mode 100644
index bbe7b650d..000000000
--- a/firmware/microblaze/usrp2p/spi_flash.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Free Software Foundation, Inc.
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef INCLUDED_SPI_FLASH_H
-#define INCLUDED_SPI_FLASH_H
-
-#include <stddef.h>
-#include <stdint.h>
-#include <stdbool.h>
-
-
-#define SPI_FLASH_PAGE_SIZE	256
-#define SPI_SS_FLASH 1
-
-
-uint32_t spi_flash_rdid(void);	/* Read ID */
-uint32_t spi_flash_rdsr(void);	/* Read Status Register */
-size_t spi_flash_log2_sector_size(void) __attribute__((pure));  /* either 16 or 18 */
-size_t spi_flash_log2_memory_size(void);
-
-static inline size_t
-spi_flash_sector_size(void)
-{
-  return ((size_t) 1) << spi_flash_log2_sector_size();
-}
-
-static inline size_t
-spi_flash_memory_size(void)
-{
-  return ((size_t) 1) << spi_flash_log2_memory_size();
-}
-
-void spi_flash_read(uint32_t flash_addr,  size_t nbytes, void *buf);
-
-/*
- * Erase all sectors that fall within the interval [flash_addr, flash_addr + nbytes).
- * Erasing sets the memory to ones.
- */
-void spi_flash_erase(uint32_t flash_addr, size_t nbytes);
-
-/*
- * Program the flash.
- * The area must have been erased prior to programming.
- */
-bool spi_flash_program(uint32_t flash_addr, size_t nbytes, const void *buf);
-
-/*
- * --- asynchronous routines ---
- */
-
-/*
- * Is the erasing or programming done?
- */
-bool spi_flash_done_p(void);
-
-/*
- * Wait for erasing or programming to complete
- */
-void spi_flash_wait(void);
-
-/*
- * Start the erase process on a single sector.
- * (It takes between 1 and 3 seconds to erase a 64KB sector)
- */
-void spi_flash_erase_sector_start(uint32_t flash_addr);
-
-/*
- * Start the programming process within a single page.
- * nbytes must be between 1 and 256.
- * (It takes between 1.4 and 5 ms to program a page -> 640 ms for 64KB)
- */
-bool spi_flash_page_program_start(uint32_t flash_addr, size_t nbytes, const void *buf);
-
-
-/*
- * --- high-level async erase ---
- */
-
-typedef struct {
-  uint32_t	first;
-  uint32_t	last;
-  uint32_t	current;
-} spi_flash_async_state_t;
-
-/*
- * Start to erase all sectors that fall within the interval [flash_addr, flash_addr + nbytes).
- * Erasing sets the memory to ones.
- *
- * Initializes s and begins the process.  Call spi_flash_async_erase_poll
- * to test for completion and advance state machine.
- */
-void spi_flash_async_erase_start(spi_flash_async_state_t *s,
-				 uint32_t flash_addr, size_t nbytes);
-
-/*
- * Poll for aysnc flash erase completion.
- * Returns true when the erase has completed.
- * (This should be called at something >= 4 Hz.  It takes 1 to 3 seconds to
- * erase each 64KB sector).
- */
-bool spi_flash_async_erase_poll(spi_flash_async_state_t *s);
-
-
-#endif /* INCLUDED_SPI_FLASH_H */
diff --git a/firmware/microblaze/usrp2p/spi_flash_private.h b/firmware/microblaze/usrp2p/spi_flash_private.h
deleted file mode 100644
index 9a1b8d3e3..000000000
--- a/firmware/microblaze/usrp2p/spi_flash_private.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2009 Free Software Foundation, Inc.
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_SPI_FLASH_PRIVATE_H
-#define INCLUDED_SPI_FLASH_PRIVATE_H
-
-#include "spi_flash.h"
-#include "spi.h"
-#include "memory_map.h"
-#include <string.h>
-
-
-/* M25P64 et al. */
-
-#define	WREN_CMD	0x06	// write enable
-#define	WRDI_CMD	0x04	// write disable
-#define	RDID_CMD	0x9f	// read identification
-#define	RDSR_CMD	0x05	// read status register
-#define WRSR_CMD	0x01	// write status register
-#define	READ_CMD	0x03
-#define	FAST_READ_CMD	0x0b
-#define	PP_CMD		0x02	// page program (256 bytes)
-#define	SE_CMD		0xd8	// sector erase (64KB)
-#define	BE_CMD		0xc7	// bulk erase (all)
-#define	RES_CMD		0xab	// read electronic sig (deprecated)
-
-/* Status register bits */
-
-#define	SR_SRWD		0x80
-#define	SR_BP2		0x10	// block protect bit 2
-#define	SR_BP1		0x08	// block protect bit 1
-#define	SR_BP0		0x04	// block protect bit 0
-#define	SR_WEL		0x02	// Write Enable Latch
-#define	SR_WIP		0x01	// Write in Progress.  Set if busy w/ program or erase cycle.
-
-
-#define	FLAGS (SPIF_PUSH_FALL | SPIF_LATCH_RISE)
-
-#define LEN(x) ((x) & SPI_CTRL_CHAR_LEN_MASK)
-
-
-static inline uint32_t
-min(uint32_t a, uint32_t b)
-{
-  return a < b ? a : b;
-}
-
-static inline uint32_t
-round_down(uint32_t x, uint32_t power_of_2)
-{
-  return x & -power_of_2;
-}
-
-#endif /* INCLUDED_SPI_FLASH_PRIVATE_H */
diff --git a/firmware/microblaze/usrp2p/spi_flash_read.c b/firmware/microblaze/usrp2p/spi_flash_read.c
deleted file mode 100644
index 36c326e96..000000000
--- a/firmware/microblaze/usrp2p/spi_flash_read.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2009 Free Software Foundation, Inc.
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "spi_flash_private.h"
-#include <stdlib.h>		// abort
-#include <nonstdio.h>
-
-static size_t _spi_flash_log2_memory_size;
-
-uint32_t 
-spi_flash_rdid(void)
-{
-  return spif_transact(SPI_TXRX, SPI_SS_FLASH, RDID_CMD << 24, 32, FLAGS) & 0xffffff;
-}
-
-size_t 
-spi_flash_log2_sector_size(void)
-{
-  static size_t _spi_flash_log2_sector_size;
-
-  if (_spi_flash_log2_sector_size != 0)
-    return _spi_flash_log2_sector_size;
-
-  
-  uint32_t id = spi_flash_rdid();
-  int type = (id >> 8) & 0xff;
-  int size = id & 0xff;
-  if (type != 0x20 || size < 22 || size > 24)
-    abort();
-
-  static unsigned char log2_sector_size[3] = {
-    16,	/* M25P32  */
-    16, /* M25P64  */
-    18, /* M25P128 */
-  };
-
-  _spi_flash_log2_sector_size = log2_sector_size[size - 22];
-  _spi_flash_log2_memory_size = size; //while we're at it
-  return _spi_flash_log2_sector_size;
-}
-
-size_t
-spi_flash_log2_memory_size(void)
-{
-  if (_spi_flash_log2_memory_size != 0)
-    return _spi_flash_log2_memory_size;
-
-  uint32_t id = spi_flash_rdid();
-  int type = (id >> 8) & 0xff;
-  int size = id & 0xff;
-  if (type != 0x20 || size < 22 || size > 24)
-    abort();
-
-  _spi_flash_log2_memory_size = size;
-  return _spi_flash_log2_memory_size;
-}
-
-void 
-spi_flash_read(uint32_t flash_addr,  size_t nbytes, void *buf)
-{
-  /*
-   * We explicitly control the slave select here (/S), so that we can
-   * do the entire read operation as a single transaction from
-   * device's point of view.  (The most our SPI peripheral can transfer
-   * in a single shot is 16 bytes.)
-   */
-  spif_wait();
-
-  spif_regs->ss = 0;
-  spif_regs->ctrl = FLAGS;	// ASS is now clear and no chip select is enabled.
-  
-  /*
-   * Do the 5 byte instruction tranfer:
-   *   FAST_READ_CMD, ADDR2, ADDR1, ADDR0, DUMMY
-   */
-  spif_regs->txrx1 = FAST_READ_CMD;
-  spif_regs->txrx0 = ((flash_addr & 0x00ffffff) << 8);
-  spif_regs->ss = SPI_SS_FLASH;		// assert chip select
-  spif_regs->ctrl = FLAGS | LEN(5 * 8);		
-  spif_regs->ctrl = FLAGS | LEN(5 * 8) | SPI_CTRL_GO_BSY;
-  spif_wait();
-
-  /*
-   * Read up to 16 bytes at a time until done
-   */
-  unsigned char *dst = (unsigned char *) buf;
-  size_t m;
-  for (size_t n = 0; n < nbytes; n += m){
-        
-    spif_regs->ctrl = FLAGS | LEN(16 * 8);	// xfer 16 bytes
-    spif_regs->ctrl = FLAGS | LEN(16 * 8) | SPI_CTRL_GO_BSY;
-    spif_wait();
-
-    uint32_t w[4];
-    w[0] = spif_regs->txrx3;	// txrx3 has first bits in it
-    w[1] = spif_regs->txrx2;
-    w[2] = spif_regs->txrx1;
-    w[3] = spif_regs->txrx0;
-    unsigned char *src = (unsigned char *) &w[0];
-    m = min(nbytes - n, 16);
-    for (size_t i = 0; i < m; i++)
-      *(dst++) = src[i];
-  }
-  spif_regs->ss = 0;			// deassert chip select
-}
diff --git a/firmware/microblaze/usrp2p/spif.c b/firmware/microblaze/usrp2p/spif.c
deleted file mode 100644
index 1c1a348f4..000000000
--- a/firmware/microblaze/usrp2p/spif.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2007,2008,2009 Free Software Foundation, Inc.
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * Code for the Flash SPI bus
- */
-
-#include "spi.h"
-#include "memory_map.h"
-
-void
-spif_init(void) 
-{
-  /*
-   * f_sclk = f_wb / ((div + 1) * 2)
-   */
-  spif_regs->div = 1;  // 0 = Div by 2 (31.25 MHz); 1 = Div-by-4 (15.625 MHz)
-
-  // run dummy transaction to work around invalid initial clock state
-  spif_transact(SPI_TXONLY, 0, 0, 8, SPIF_PUSH_FALL | SPIF_LATCH_RISE);
-}
-
-inline void
-spif_wait(void) 
-{
-  while (spif_regs->ctrl & SPI_CTRL_GO_BSY)
-    ;
-}
-
-uint32_t
-spif_transact(bool readback_, int slave, uint32_t data, int length, uint32_t flags) 
-{
-  flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG);
-  int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
-
-  spif_wait();
-
-  // Data we will send
-  spif_regs->txrx0 = data;
-
-  // Run it -- write once and rewrite with GO set
-  spif_regs->ctrl = ctrl;
-  // Tell it which SPI slave device to access
-  spif_regs->ss = slave & 0xff;
-  spif_regs->ctrl = ctrl | SPI_CTRL_GO_BSY;
-
-  if(readback_) {
-    spif_wait();
-    return spif_regs->txrx0;
-  }
-  else
-    return 0;
-}
diff --git a/firmware/microblaze/usrp2p/udp_fw_update.c b/firmware/microblaze/usrp2p/udp_fw_update.c
deleted file mode 100644
index ead08ad2c..000000000
--- a/firmware/microblaze/usrp2p/udp_fw_update.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2010 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-//Routines to handle updating the SPI Flash firmware via UDP
-
-#include <net_common.h>
-#include "usrp2/fw_common.h"
-#include "spi.h"
-#include "spi_flash.h"
-#include <nonstdio.h>
-#include <string.h>
-#include "ethernet.h"
-#include "udp_fw_update.h"
-#include "xilinx_s3_icap.h"
-
-//Firmware update packet handler
-void handle_udp_fw_update_packet(struct socket_address src, struct socket_address dst,
-                                 unsigned char *payload, int payload_len) {
-
-  const usrp2_fw_update_data_t *update_data_in = (usrp2_fw_update_data_t *) payload;
-
-  usrp2_fw_update_data_t update_data_out;
-  usrp2_fw_update_id_t update_data_in_id = update_data_in->id;
-
-  //ensure that the protocol versions match
-/*  if (payload_len >= sizeof(uint32_t) && update_data_in->proto_ver != USRP2_FW_COMPAT_NUM){
-    printf("!Error in update packet handler: Expected compatibility number %d, but got %d\n",
-        USRP2_FW_COMPAT_NUM, update_data_in->proto_ver
-      );
-      update_data_in_id = USRP2_FW_UPDATE_ID_OHAI_LOL; //so we can respond
-  }
-*/
-  //ensure that this is not a short packet
-  if (payload_len < sizeof(usrp2_fw_update_data_t)){
-      printf("!Error in update packet handler: Expected payload length %d, but got %d\n",
-          (int)sizeof(usrp2_fw_update_data_t), payload_len
-      );
-      update_data_in_id = USRP2_FW_UPDATE_ID_WAT;
-  }
-
-  spi_flash_async_state_t spi_flash_async_state;
-
-  switch(update_data_in_id) {
-  case USRP2_FW_UPDATE_ID_OHAI_LOL: //why hello there you handsome devil
-    update_data_out.id = USRP2_FW_UPDATE_ID_OHAI_OMG;
-    memcpy(&update_data_out.data.ip_addr, (void *)get_ip_addr(), sizeof(struct ip_addr));
-    break;
-
-  case USRP2_FW_UPDATE_ID_WATS_TEH_FLASH_INFO_LOL: //query sector size, memory size so the host can mind the boundaries
-    update_data_out.data.flash_info_args.sector_size_bytes = spi_flash_sector_size();
-    update_data_out.data.flash_info_args.memory_size_bytes = spi_flash_memory_size();
-    update_data_out.id = USRP2_FW_UPDATE_ID_HERES_TEH_FLASH_INFO_OMG;
-    break;
-
-  case USRP2_FW_UPDATE_ID_ERASE_TEH_FLASHES_LOL: //out with the old
-    spi_flash_async_erase_start(&spi_flash_async_state, update_data_in->data.flash_args.flash_addr, update_data_in->data.flash_args.length);
-    update_data_out.id = USRP2_FW_UPDATE_ID_ERASING_TEH_FLASHES_OMG;
-    break;
-
-  case USRP2_FW_UPDATE_ID_R_U_DONE_ERASING_LOL:
-    //poll for done, set something in the reply packet
-    //spi_flash_async_erase_poll() also advances the state machine, so you should call it reasonably often to get things done quicker
-    if(spi_flash_async_erase_poll(&spi_flash_async_state)) update_data_out.id = USRP2_FW_UPDATE_ID_IM_DONE_ERASING_OMG;
-    else update_data_out.id = USRP2_FW_UPDATE_ID_NOPE_NOT_DONE_ERASING_OMG;
-    break;
-
-  case USRP2_FW_UPDATE_ID_WRITE_TEH_FLASHES_LOL: //and in with the new
-    //spi_flash_program() goes pretty quick compared to page erases, so we don't bother polling -- it'll come back in some milliseconds
-    //if it doesn't come back fast enough, we'll just write smaller packets at a time until it does
-    spi_flash_program(update_data_in->data.flash_args.flash_addr, update_data_in->data.flash_args.length, update_data_in->data.flash_args.data);
-    update_data_out.id = USRP2_FW_UPDATE_ID_WROTE_TEH_FLASHES_OMG;
-    break;
-
-  case USRP2_FW_UPDATE_ID_READ_TEH_FLASHES_LOL: //for verify
-    spi_flash_read(update_data_in->data.flash_args.flash_addr,  update_data_in->data.flash_args.length, update_data_out.data.flash_args.data);
-    update_data_out.id = USRP2_FW_UPDATE_ID_KK_READ_TEH_FLASHES_OMG;
-    break;
-
-  case USRP2_FW_UPDATE_ID_RESET_MAH_COMPUTORZ_LOL: //for if we ever get the ICAP working
-    //should reset via icap_reload_fpga(uint32_t flash_address);
-    update_data_out.id = USRP2_FW_UPDATE_ID_RESETTIN_TEH_COMPUTORZ_OMG;
-    //you should note that if you get a reply packet to this the reset has obviously failed
-    icap_reload_fpga(0);
-    break;
-
-//  case USRP2_FW_UPDATE_ID_KTHXBAI: //see ya
-//    break;
-
-  default: //uhhhh
-    update_data_out.id = USRP2_FW_UPDATE_ID_WAT;
-  }
-  send_udp_pkt(USRP2_UDP_UPDATE_PORT, src, &update_data_out, sizeof(update_data_out));
-}
diff --git a/firmware/microblaze/usrp2p/xilinx_s3_icap.c b/firmware/microblaze/usrp2p/xilinx_s3_icap.c
deleted file mode 100644
index 50c85231c..000000000
--- a/firmware/microblaze/usrp2p/xilinx_s3_icap.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-
-/* Changes required to work for the Spartan-3A series:
- * The ICAP interface on the 3A is 8 bits wide, instead of 32.
- * Everything is Xilinx standard LSBit-first.
- * The operations are all different.
- * Commands are 16 bits long, presented to the ICAP interface 8 bits at a time.
-*/
-
-#include <xilinx_s3_icap.h>
-#include <memory_map.h>
-#include <spi_flash_private.h> //for READ_CMD
-
-
-/* bit swap end-for-end */
-static inline unsigned char
-swap8(unsigned char x)
-{
-  unsigned char r = 0;
-  r |= (x >> 7) & 0x01;
-  r |= (x >> 5) & 0x02;
-  r |= (x >> 3) & 0x04;
-  r |= (x >> 1) & 0x08;
-
-  r |= (x << 1) & 0x10;
-  r |= (x << 3) & 0x20;
-  r |= (x << 5) & 0x40;
-  r |= (x << 7) & 0x80;
-
-  return r;
-}
-
-void
-wr_icap(uint8_t x)
-{
-    icap_regs->icap = swap8(x);
-}
-
-uint8_t
-rd_icap(void)
-{
-    return swap8(icap_regs->icap);
-}
-
-
-void
-icap_reload_fpga(uint32_t flash_address)
-{
-    union {
-        uint32_t i;
-        uint8_t c[4];
-    } t;
-    t.i = flash_address;
-
-    //note! t.c[0] MUST contain the byte-wide read command for the flash device used.
-    //for the 25P64, and most other flash devices, this is 0x03.
-    t.c[0] = FAST_READ_CMD;
-
-    //TODO: look up the watchdog timer, ensure it won't fire too soon
-
-    //UG332 p279
-    wr_icap(0xff);
-    wr_icap(0xff); //dummy word, probably unnecessary
-    wr_icap(0xAA);
-    wr_icap(0x99); //sync word
-    wr_icap(0x32);
-    wr_icap(0x61); //Type 1 write General 1 (1 word)
-    wr_icap(t.c[2]); //bits 15-8
-    wr_icap(t.c[3]); //bits 7-0
-    wr_icap(0x32);
-    wr_icap(0x81); //Type 1 write General 2 (1 word)
-    wr_icap(t.c[0]); //C0-C8, the byte-wide read command
-    wr_icap(t.c[1]); //Upper 8 bits of 24-bit address
-    wr_icap(0x30);
-    wr_icap(0xA1); //Type 1 write CMD (1 word)
-    wr_icap(0x00);
-    wr_icap(0x0E); //REBOOT command
-    wr_icap(0x20);
-    wr_icap(0x00); //Type 1 NOP
-    wr_icap(0x20);
-    wr_icap(0x00);
-}
diff --git a/firmware/microblaze/usrp2p/xilinx_s3_icap.h b/firmware/microblaze/usrp2p/xilinx_s3_icap.h
deleted file mode 100644
index 7b7e9eccc..000000000
--- a/firmware/microblaze/usrp2p/xilinx_s3_icap.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2009 Ettus Research LLC
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_XILINX_S3_ICAP_H
-#define INCLUDED_XILINX_S3_ICAP_H
-
-#include <stdint.h>
-
-
-void wr_icap(uint8_t x);
-uint8_t rd_icap(void);
-
-//int icap_read_config_reg(int regno);
-
-/*
- * Attempt to reload the fpga from \p flash_address.
- * Shouldn't return, but might.
- */
-void icap_reload_fpga(uint32_t flash_address);
-
-
-#endif /* INCLUDED_XILINX_S3_ICAP_H */