zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

1 files changed, 0 insertions, 304 deletions

diff --git a/firmware/microblaze/usrp2p/ethernet.c b/firmware/microblaze/usrp2p/ethernet.c
deleted file mode 100644
index 03891f959..000000000
--- a/firmware/microblaze/usrp2p/ethernet.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-//Changes for USRP2P: status registers different (ethernet.h)
-
-#include "ethernet.h"
-#include "memory_map.h"
-#include "eth_phy.h"
-#include <eth_mac.h>
-#include <eth_mac_regs.h>
-#include <pic.h>
-#include <hal_io.h>
-#include <nonstdio.h>
-#include <stdbool.h>
-#include <i2c.h>
-#include "usrp2/fw_common.h"
-
-#define VERBOSE 0
-
-static ethernet_t ed_state;
-static ethernet_link_changed_callback_t ed_callback = 0;
-
-void 
-ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback)
-{
-  ed_callback = new_callback;
-}
-
-
-static void
-ed_set_mac_speed(int speed)
-{
-  printf("Speed set to %d\n",speed);
-  /*
-  switch(speed){
-  case 10:
-    eth_mac->speed = 1;
-    break;
-  case 100:
-    eth_mac->speed = 2;
-    break;
-  case 1000:
-    eth_mac->speed = 4;
-    break;
-  default:
-    break;
-  }
-  */
-}
-
-static void
-ed_link_up(int speed)
-{
-  // putstr("ed_link_up: "); puthex16_nl(speed);
-
-  ed_set_mac_speed(speed);
-
-	//turn on link LED for USRP2P
-	hal_set_leds(LED_RJ45, LED_RJ45);
-
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(speed);
-}
-
-static void
-ed_link_down(void)
-{
-  // putstr("ed_link_down\n");
-
-	//turn off link LED for USRP2P
-	hal_set_leds(0, LED_RJ45);
-
-  if (ed_callback)		// fire link changed callback
-    (*ed_callback)(0);
-}
-
-
-static void
-ed_link_speed_change(int speed)
-{
-  ed_link_down();
-  ed_link_up(speed);
-}
-
-static void
-print_flow_control(int flow_control)
-{
-  static const char *flow_control_msg[4] = {
-    "NONE", "WE_TX", "WE_RX", "SYMMETRIC"
-  };
-  putstr("ethernet flow control: ");
-  puts(flow_control_msg[flow_control & 0x3]);
-}
-
-static void
-check_flow_control_resolution(void)
-{
-  static const unsigned char table[16] = {
-    // index = {local_asm, local_pause, partner_asm, partner_pause}
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_NONE,
-    FC_NONE,  FC_SYMM,  FC_NONE,  FC_SYMM,
-    FC_NONE,  FC_NONE,  FC_NONE,  FC_WE_TX,
-    FC_NONE,  FC_SYMM,  FC_WE_RX, FC_SYMM
-  };
-
-  int us = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  int lp = eth_mac_miim_read(PHY_LP_ABILITY);
-  int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3);
-  ed_state.flow_control = table[index];
-
-  if (1)
-    print_flow_control(ed_state.flow_control);
-}
-
-/*
- * Read the PHY state register to determine link state and speed
- */
-static void
-ed_check_phy_state(void)
-{
-  int phystat = eth_mac_miim_read(PHY_PHY_STATUS);
-  eth_link_state_t new_state = LS_UNKNOWN;
-  int new_speed = S_UNKNOWN;
-
-  if (VERBOSE){
-    putstr("PHYSTAT: ");
-    puthex16_nl(phystat);
-  }
-
-  if (phystat & PHYSTAT_LINK){		// link's up
-    if (VERBOSE)
-      puts("  LINK_GOOD");
-
-    new_state = LS_UP;
-    switch (phystat & PHYSTAT_SPEED_MASK){
-    case PHYSTAT_SPEED_10:
-      new_speed = 10;
-      break;
-      
-    case PHYSTAT_SPEED_100:
-      new_speed = 100;
-      break;
-      
-    case PHYSTAT_SPEED_1000:
-      new_speed = 1000;
-      break;
-
-    default:
-      new_speed = S_UNKNOWN;
-      break;
-    }
-
-    check_flow_control_resolution();
-  }
-  else {				// link's down
-    if (VERBOSE)
-      puts("  NOT LINK_GOOD");
-    
-    new_state = LS_DOWN;
-    new_speed = S_UNKNOWN;
-  }
-
-  if (new_state != ed_state.link_state){
-    ed_state.link_state = new_state;		// remember new state
-    if (new_state == LS_UP)
-      ed_link_up(new_speed);
-    else if (new_state == LS_DOWN)
-      ed_link_down();
-  }
-  else if (new_state == LS_UP && new_speed != ed_state.link_speed){
-    ed_state.link_speed = new_speed;		// remember new speed
-    ed_link_speed_change(new_speed);
-  }
-}
-
-/*
- * This is fired when the ethernet PHY state changes
- */
-static void
-eth_phy_irq_handler(unsigned irq)
-{
-  ed_check_phy_state();
-  eth_mac_miim_read(PHY_INT_STATUS);
-//  eth_mac_miim_write(PHY_INT_CLEAR, ~0);	// clear all ints
-}
-
-void
-ethernet_init(void)
-{
-  eth_mac_init(ethernet_mac_addr());
-
-  ed_state.link_state = LS_UNKNOWN;
-  ed_state.link_speed = S_UNKNOWN;
-
-  // initialize MAC registers
-  //  eth_mac->tx_hwmark = 0x1e;
-  //eth_mac->tx_lwmark = 0x19;
-
-  //eth_mac->crc_chk_en = 1;
-  //eth_mac->rx_max_length = 2048;
-
-  // configure PAUSE frame stuff
-  //eth_mac->tx_pause_en = 1;		// pay attn to pause frames sent to us
-
-  //eth_mac->pause_quanta_set = 38;	// a bit more than 1 max frame 16kb/512 + fudge
-  //eth_mac->pause_frame_send_en = 1;	// enable sending pause frames
-
-
-  // setup PHY to interrupt on changes
-
-  unsigned mask =
-    (PHY_INT_ENABLE       //master interrupt enable
-     | PHY_INT_LINK_STATUS_CHANGE
-     | PHY_INT_RX_STATUS_CHANGE
-     );
-
-  eth_mac_miim_read(PHY_INT_STATUS); //clear interrupts
-  eth_mac_miim_write(PHY_INT_MASK, mask);	// enable the ones we want
-
-	//set the LED behavior to activity instead of link
-	unsigned led = (LED_ACTIVITY << PHY_LED_LINK_LSB) | (LED_TX << PHY_LED_TXRX_LSB);
-	eth_mac_miim_write(PHY_LED2, led);
-
-  pic_register_handler(IRQ_PHY, eth_phy_irq_handler);
-
-  // Advertise our flow control configuation.
-  //
-  // We and the link partner each specify two bits in the base page
-  // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR.
-  // The bits say what a device is "willing" to do, not what may actually
-  // happen as a result of the negotiation.  There are 4 cases:
-  //
-  // PAUSE  ASM_DIR
-  //
-  //  0        0        I have no flow control capability.
-  //
-  //  1        0        I both assert and respond to flow control.
-  //
-  //  0        1        I assert flow control, but cannot respond.  That is,
-  //                    I want to be able to send PAUSE frames, but will ignore any
-  //		 	you send to me.  (This is our configuration.)
-  //
-  //  1        1        I can both assert and respond to flow control AND I am willing
-  //                    to operate symmetrically OR asymmetrically in EITHER direction.
-  //                    (We hope the link partner advertises this, otherwise we don't
-  //			get what we want.)
-
-  int t = eth_mac_miim_read(PHY_AUTONEG_ADV);
-  t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR);
-  t |= NWAY_AR_ASM_DIR;
-
-  // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex
-  t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS);
-
-  eth_mac_miim_write(PHY_AUTONEG_ADV, t);
-  int r = eth_mac_miim_read(PHY_AUTONEG_ADV);  		// DEBUG, read back
-  if (t != r){
-    printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r);
-  }
-
-  // Restart autonegotation.  
-  // We want to ensure that we're advertising our PAUSE capabilities.
-  t = eth_mac_miim_read(PHY_CTRL);
-  eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG);
-}
-
-int
-ethernet_check_errors(void)
-{
-  // these registers are reset when read
-  
-  int	r = 0;
-  /*
-  if (eth_mac_read_rmon(0x05) != 0)
-    r |= RME_RX_CRC;
-  if (eth_mac_read_rmon(0x06) != 0)
-    r |= RME_RX_FIFO_FULL;
-  if (eth_mac_read_rmon(0x07) != 0)
-    r |= RME_RX_2SHORT_2LONG;
-  
-  if (eth_mac_read_rmon(0x25) != 0)
-    r |= RME_TX_JAM_DROP;
-  if (eth_mac_read_rmon(0x26) != 0)
-    r |= RME_TX_FIFO_UNDER;
-  if (eth_mac_read_rmon(0x27) != 0)
-    r |= RME_TX_FIFO_OVER;
-  */
-  return r;
-}