usrp2: reorganized firmware directory

1 files changed, 197 insertions, 0 deletions

diff --git a/firmware/microblaze/usrp2/sd.c b/firmware/microblaze/usrp2/sd.c
new file mode 100644
index 000000000..d000b28ae
--- /dev/null
+++ b/firmware/microblaze/usrp2/sd.c
@@ -0,0 +1,197 @@
+/* -*- c -*- */
+/*
+ * Copyright 2008 Ettus Research LLC
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "sd.h"
+#include "memory_map.h"
+#include "stdint.h"
+#include "stdio.h"
+
+static inline void
+sd_packarg(unsigned char *argument,unsigned int value)
+{
+  argument[3] = (unsigned char)(value >> 24);
+  argument[2] = (unsigned char)(value >> 16);
+  argument[1] = (unsigned char)(value >> 8);
+  argument[0] = (unsigned char)(value);
+}
+
+int
+sd_init(void)
+{
+  unsigned char response[5];
+  unsigned char argument[4];
+  int i,j;
+
+  for(i=0;i<4;i++)
+    argument[i] = 0;
+
+  // Set clock to less than 400 kHz to start out
+  sdspi_regs->clkdiv = 128;
+
+  // Delay at least 74 cycles
+  sd_assert_cs();
+  for(i = 0; i < 100; i++)
+    sd_send_byte(SD_IDLE);
+  sd_deassert_cs();
+  
+  // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58
+  // Put card in idle state
+  if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0)
+    return 0;  // Something went wrong in command
+
+  j = 0;
+  do {
+    j++;
+    if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1)
+      sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument);
+    else
+      j = SD_IDLE_WAIT_MAX;
+  }
+  while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX));
+
+  if(j>= SD_IDLE_WAIT_MAX)  // IDLE timeout exceeded, card asleep
+    return 0;
+  
+  // CMD58 reads the SD card capabilities
+  if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0)
+    return 0;  // CMD58 FAIL
+
+  if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33)
+    return 0;  // Card doesn't do 3.3V
+
+  //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]);
+
+  // Set blocklen here
+  sd_packarg(argument,SD_BLOCKLEN);
+  if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0)
+    return 0;    // Set Blocklen failed
+  
+  // Reset back to high speed
+  sdspi_regs->clkdiv = 4;
+  //puts("finished init\n");
+  return 1;
+}
+
+int sd_send_command(unsigned char cmd,unsigned char response_type,
+		    unsigned char *response,unsigned char *argument)
+{
+  int i;
+  char response_length;
+  unsigned char tmp;
+
+  sd_assert_cs();
+  sd_send_byte((cmd & 0x3F) | 0x40);
+  for(i=3;i>=0;i--)
+    sd_send_byte(argument[i]);
+  sd_send_byte(SD_CRC);   // Always the same
+
+  response_length = 0;
+  switch(response_type)
+    {
+    case SD_R1:
+    case SD_R1B:
+      response_length = 1;
+      break;
+    case SD_R2:
+      response_length = 2;
+      break;
+    case SD_R3:
+      response_length = 5;
+      break;
+    default:
+      break;
+    }
+
+  // Wait for a response, which will have a 0 start bit
+  i = 0;
+  do
+    {
+      tmp = sd_rcv_byte();
+      i++;
+    }
+  while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT);
+
+  if(i>= SD_CMD_TIMEOUT)
+    {
+      sd_deassert_cs();
+      //puts("cmd send timeout\n");
+      return 0;
+    }
+
+  for(i=response_length-1; i>=0; i--)
+    {
+      response[i] = tmp;
+      tmp = sd_rcv_byte();
+    }
+  i = 0;
+  if(response_type == SD_R1B)
+    {
+      do
+	{
+	  i++;
+	  tmp = sd_rcv_byte();
+	}
+      while(tmp != SD_IDLE);
+      sd_send_byte(SD_IDLE);
+    }
+  
+  //puts("send cmd success\n");
+  sd_deassert_cs();
+  return 1;
+}
+
+int
+sd_read_block (unsigned int blockaddr, unsigned char *buf)
+{
+  unsigned char response[5];
+  unsigned char argument[4];
+  unsigned int i = 0;
+  unsigned char tmp;
+
+  blockaddr <<= SD_BLOCKLEN_NBITS;
+  sd_packarg(argument,blockaddr);
+  if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0)
+    return 0;    //Failed READ;
+  if(response[0] != 0)
+    return 0;    //Misaligned READ
+
+  sd_assert_cs();
+  i = 0;
+  do
+    {
+      tmp = sd_rcv_byte();
+      i++;
+    }
+  while((tmp == 0xFF) && (i < SD_RD_TIMEOUT));
+  if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0))
+    {
+      sd_send_byte(SD_IDLE);  // Send a dummy before quitting
+      return 0;   // Data ERROR
+    }
+  for(i=0;i<SD_BLOCKLEN;i++)
+    buf[i] = sd_rcv_byte();
+  return 1;
+
+}
+
+int
+sd_write_block(unsigned int blockaddr, const unsigned char *buf)
+{
+  // FIXME not implemented yet
+  return 0;
+}