diff options
author | Josh Blum <josh@joshknows.com> | 2010-04-13 16:19:33 -0700 |
---|---|---|
committer | Josh Blum <josh@joshknows.com> | 2010-04-13 16:19:33 -0700 |
commit | c10e58cf253feb47e16d01ff5d47924d8de71365 (patch) | |
tree | a602ab435df5c0beeb3f752e8e18391aade25344 /firmware/microblaze/lib/db.h | |
parent | 841400bb4e72375b439f04f0bd855e64b9f83f00 (diff) | |
download | uhd-c10e58cf253feb47e16d01ff5d47924d8de71365.tar.gz uhd-c10e58cf253feb47e16d01ff5d47924d8de71365.tar.bz2 uhd-c10e58cf253feb47e16d01ff5d47924d8de71365.zip |
removed unused firmware code
Diffstat (limited to 'firmware/microblaze/lib/db.h')
-rw-r--r-- | firmware/microblaze/lib/db.h | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/firmware/microblaze/lib/db.h b/firmware/microblaze/lib/db.h index 5153822c6..358cb222b 100644 --- a/firmware/microblaze/lib/db.h +++ b/firmware/microblaze/lib/db.h @@ -28,82 +28,4 @@ int read_dboard_eeprom(int i2c_addr); -struct db_base; - -/* pointers to daughterboard structures */ -extern struct db_base *tx_dboard; -extern struct db_base *rx_dboard; - - -//! Intermediate tuning information - -struct tune_result -{ - //! The RF frequency that corresponds to DC in the IF from the daughterboard - u2_fxpt_freq_t baseband_freq; - - //! The DDC/DUC frequency used to down/up convert to/from the target frequency - u2_fxpt_freq_t dxc_freq; - - //! Any differerence btwn target and actual (typically < 0.01 Hz) - u2_fxpt_freq_t residual_freq; - - //! Is the complex baseband spectrum inverted - bool inverted; -}; - - -/*! - * \brief One-time init at powerup - * - * Sets rx_dboard, tx_dboard and initializes daughterboards. - */ -void -db_init(void); - -/*! - * \brief Set daughterboard LO offset frequency. - * - * \param[in] db is the daughterboard instance - * \param[in] offset is the amount to add to tuning requests - * \param[out] success or failure - */ -bool -db_set_lo_offset(struct db_base *db, u2_fxpt_freq_t offset); - -/*! - * \brief Two stage tuning. Given target_freq, tune LO and DDC/DUC - * - * \param[in] db is the daughterboard instance - * \param[in] target_freq is the freq to translate the complex baseband to/from. - * \param[out] result provides details of the resulting configuration. - * - */ -bool -db_tune(struct db_base *db, u2_fxpt_freq_t target_freq, struct tune_result *result); - - -/* - * Set only the DDC frequency - */ -bool -db_set_ddc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq); - -/* - * Set only the DUC frequency - */ -bool -db_set_duc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq); - - -/*! - * \brief Set gain - */ -bool -db_set_gain(struct db_base *db, u2_fxpt_gain_t gain); - - -void -set_atr_regs(int bank, int atr_rxval, int atr_txval); - #endif /* INCLUDED_DB_H */ |