Deleted manually those files to correspond with USRP2P branch.

1 files changed, 0 insertions, 187 deletions

diff --git a/firmware/microblaze/apps/gen_eth_packets.c b/firmware/microblaze/apps/gen_eth_packets.c
deleted file mode 100644
index 4d521f6bf..000000000
--- a/firmware/microblaze/apps/gen_eth_packets.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright 2007 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-#include "u2_init.h"
-#include "memory_map.h"
-#include "spi.h"
-#include "hal_io.h"
-#include "buffer_pool.h"
-#include "pic.h"
-#include <stdbool.h>
-#include "ethernet.h"
-#include "nonstdio.h"
-#include "usrp2_eth_packet.h"
-#include "memcpy_wa.h"
-#include "print_rmon_regs.h"
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-
-
-// ----------------------------------------------------------------
-
-static eth_mac_addr_t dst_mac_addr =
-  {{  0xff, 0xff, 0xff, 0xff, 0xff, 0xff }};
-
-// ----------------------------------------------------------------
-
-// #define	PACKET_SIZE 1500		// bytes
-// #define ETH_DATA_RATE 1000000		// 1MB/s
-// #define	ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE)	// 13,3333 pkts/s
-
-// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE;	// ticks between interrupts
-
-static int timer_delta = (int)(MASTER_CLK_RATE * 1e-3);		// tick at 1 kHz
-static int sim_timer_delta = (int)(MASTER_CLK_RATE * 100e-6);	// tick at 10 kHz
-
-static volatile bool send_packet_now = false;   // timer handler sets this
-static volatile bool link_is_up = false;	// eth handler sets this
-
-int packet_number = 0;
-
-
-#define CPU_TX_BUF	0	// cpu xmits ethernet frames from here
-#define CPU_RX_BUF	1	// receive ethernet frames here
-
-// ----------------------------------------------------------------
-
-/*
- * Called when eth phy state changes (w/ interrupts disabled)
- */
-void
-link_changed_callback(int speed)
-{
-  link_is_up = speed == 0 ? false : true;
-  hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2);
-  printf("\neth link changed: speed = %d\n", speed);
-}
-
-void
-timer_irq_handler(unsigned irq)
-{
-  hal_set_timeout(timer_delta);	// schedule next timeout
-  send_packet_now = 1;
-}
-
-
-static void
-init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum)
-{
-  int i = 0;
-  int mark = ((bufnum & 0xff) << 24) | 0x005A0000;
-
-  for (i = 0; i < BP_NLINES; i++){
-    buf[i] = mark | i;
-    mark ^= 0x00FF0000;
-  }
-
-  // copy header into buffer
-  memcpy_wa(buf, pkt, sizeof(*pkt));
-}
-
-static void
-init_packets(void)
-{
-  u2_eth_packet_t	pkt __attribute__((aligned (4)));
-
-  memset(&pkt, 0, sizeof(pkt));
-
-  pkt.ehdr.dst = dst_mac_addr;
-  pkt.ehdr.src = *ethernet_mac_addr();
-  pkt.ehdr.ethertype = U2_ETHERTYPE;
-  pkt.fixed.word0 = 0x01234567;
-  pkt.fixed.timestamp = 0xffffffff;
-
-  // init just the one we're using
-  init_packet((void *)buffer_ram(CPU_TX_BUF), &pkt, CPU_TX_BUF);
-}
-
-int
-main(void)
-{
-  int npackets_sent = 0;
-
-  u2_init();
-
-  // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output
-  //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111");
-  //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111");
-
-  putstr("\ngen_eth_packets\n");
-  
-  hal_set_leds(0x0, 0x3);
-
-  init_packets();
-
-  pic_register_handler(IRQ_TIMER, timer_irq_handler);
-
-  if (hwconfig_simulation_p())
-    timer_delta = sim_timer_delta;
-
-  hal_set_timeout(timer_delta);
-
-  ethernet_register_link_changed_callback(link_changed_callback);
-  ethernet_init();
-
-  /*
-  if (hwconfig_simulation_p()){
-    eth_mac->speed = 4;	// hardcode mac speed to 1000
-    link_is_up = true;
-  }
-  */
-
-  // fire off a receive from the ethernet
-  bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE);
-
-  while(1){
-    uint32_t status = buffer_pool_status->status;
-
-    if (status & (BPS_DONE(CPU_RX_BUF) | BPS_ERROR(CPU_RX_BUF))){
-      bp_clear_buf(CPU_RX_BUF);
-      // ignore incoming ethernet packets; they were looped back in sim
-      bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE);
-    }
-
-    if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))){
-      if (status & BPS_ERROR(CPU_TX_BUF)){
-	putchar('E');
-      }
-      bp_clear_buf(CPU_TX_BUF);
-      npackets_sent++;
-      if ((npackets_sent & 0xF) == 0){	// print after every 16 packets
-	//print_rmon_regs();
-	putchar('.');
-      }
-    }
-
-    if (link_is_up && send_packet_now && (status & BPS_IDLE(CPU_TX_BUF))){
-      send_packet_now = false;
-
-      // kick off the next packet
-      // FIXME set packet number in packet
-
-      bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, 255);	// 1KB total
-      hal_toggle_leds(0x1);
-    }
-  }
-
-  hal_finish();
-  return 1;
-}