usrp1: Add FX2 firmware files

These firmware files for the usrp1 are imported from
GNURadio.

1 files changed, 117 insertions, 0 deletions

diff --git a/firmware/fx2/include/fpga_regs_common.v b/firmware/fx2/include/fpga_regs_common.v
new file mode 100644
index 000000000..8035d8565
--- /dev/null
+++ b/firmware/fx2/include/fpga_regs_common.v
@@ -0,0 +1,117 @@
+//
+// This file is machine generated from ./fpga_regs_common.h
+// Do not edit by hand; your edits will be overwritten.
+//
+
+// This file defines registers common to all FPGA configurations.
+// Registers 0 to 31 are reserved for use in this file.
+
+
+// The FPGA needs to know the rate that samples are coming from and
+// going to the A/D's and D/A's.  div = 128e6 / sample_rate
+
+`define FR_TX_SAMPLE_RATE_DIV     7'd0
+`define FR_RX_SAMPLE_RATE_DIV     7'd1
+
+// 2 and 3 are defined in the ATR section
+
+`define FR_MASTER_CTRL            7'd4	// master enable and reset controls
+
+// i/o direction registers for pins that go to daughterboards.
+// Setting the bit makes it an output from the FPGA to the d'board.
+// top 16 is mask, low 16 is value
+
+`define FR_OE_0                   7'd5	// slot 0
+`define FR_OE_1                   7'd6
+`define FR_OE_2                   7'd7
+`define FR_OE_3                   7'd8
+
+// i/o registers for pins that go to daughterboards.
+// top 16 is a mask, low 16 is value
+
+`define FR_IO_0                   7'd9	// slot 0
+`define FR_IO_1                   7'd10
+`define FR_IO_2                   7'd11
+`define FR_IO_3                   7'd12
+
+`define FR_MODE                   7'd13
+
+
+// If the corresponding bit is set, internal FPGA debug circuitry
+// controls the i/o pins for the associated bank of daughterboard
+// i/o pins.  Typically used for debugging FPGA designs.
+
+`define FR_DEBUG_EN               7'd14
+
+
+// If the corresponding bit is set, enable the automatic DC
+// offset correction control loop.
+//
+// The 4 low bits are significant:
+//
+//   ADC0 = (1 << 0)
+//   ADC1 = (1 << 1)
+//   ADC2 = (1 << 2)
+//   ADC3 = (1 << 3)
+//
+// This control loop works if the attached daugherboard blocks DC.
+// Currently all daughterboards do block DC.  This includes:
+// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
+
+`define FR_DC_OFFSET_CL_EN        7'd15			// DC Offset Control Loop Enable
+
+
+// offset corrections for ADC's and DAC's (2's complement)
+
+`define FR_ADC_OFFSET_0           7'd16
+`define FR_ADC_OFFSET_1           7'd17
+`define FR_ADC_OFFSET_2           7'd18
+`define FR_ADC_OFFSET_3           7'd19
+
+
+// ------------------------------------------------------------------------
+// Automatic Transmit/Receive switching
+//
+// If automatic transmit/receive (ATR) switching is enabled in the
+// FR_ATR_CTL register, the presence or absence of data in the FPGA
+// transmit fifo selects between two sets of values for each of the 4
+// banks of daughterboard i/o pins.
+//
+// Each daughterboard slot has 3 16-bit registers associated with it:
+//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
+//
+// FR_ATR_MASK_{0,1,2,3}: 
+//
+//   These registers determine which of the daugherboard i/o pins are
+//   affected by ATR switching.  If a bit in the mask is set, the
+//   corresponding i/o bit is controlled by ATR, else it's output
+//   value comes from the normal i/o pin output register:
+//   FR_IO_{0,1,2,3}.
+//
+// FR_ATR_TXVAL_{0,1,2,3}:
+// FR_ATR_RXVAL_{0,1,2,3}:
+//
+//   If the Tx fifo contains data, then the bits from TXVAL that are
+//   selected by MASK are output.  Otherwise, the bits from RXVAL that
+//   are selected by MASK are output.
+                      
+`define FR_ATR_MASK_0             7'd20	// slot 0
+`define FR_ATR_TXVAL_0            7'd21
+`define FR_ATR_RXVAL_0            7'd22
+
+`define FR_ATR_MASK_1             7'd23	// slot 1
+`define FR_ATR_TXVAL_1            7'd24
+`define FR_ATR_RXVAL_1            7'd25
+
+`define FR_ATR_MASK_2             7'd26	// slot 2
+`define FR_ATR_TXVAL_2            7'd27
+`define FR_ATR_RXVAL_2            7'd28
+
+`define FR_ATR_MASK_3             7'd29	// slot 3
+`define FR_ATR_TXVAL_3            7'd30
+`define FR_ATR_RXVAL_3            7'd31
+
+// Clock ticks to delay rising and falling edge of T/R signal
+`define FR_ATR_TX_DELAY           7'd2
+`define FR_ATR_RX_DELAY           7'd3
+