b100: added b100 firmware (squashed)

13 files changed, 1987 insertions, 0 deletions

diff --git a/firmware/fx2/b100/.gitignore b/firmware/fx2/b100/.gitignore
new file mode 100644
index 000000000..e27ec2046
--- /dev/null
+++ b/firmware/fx2/b100/.gitignore
@@ -0,0 +1,19 @@
+/*.ihx
+/*.lnk
+/*.lst
+/*.map
+/*.mem
+/*.rel
+/*.rst
+/*.sym
+/blink_leds.asm
+/usrp_common.asm
+/command_loop.asm
+/fpga.asm
+/*.asm
+/Makefile
+/Makefile.in
+/usrp_gpif.c
+/usrp_gpif_inline.h
+/Makefile.in
+/burn-usrp1p-eeprom
diff --git a/firmware/fx2/b100/CMakeLists.txt b/firmware/fx2/b100/CMakeLists.txt
new file mode 100644
index 000000000..438aa9207
--- /dev/null
+++ b/firmware/fx2/b100/CMakeLists.txt
@@ -0,0 +1,88 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include_directories(${CMAKE_SOURCE_DIR}/common)
+
+#for usrp_common.h and the regs files...
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
+
+#now make a lib to link against
+set(libb100_sources 
+    ${CMAKE_SOURCE_DIR}/common/delay.c
+    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
+    ${CMAKE_SOURCE_DIR}/common/i2c.c
+    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
+    ${CMAKE_SOURCE_DIR}/common/isr.c
+    ${CMAKE_SOURCE_DIR}/common/timer.c
+    ${CMAKE_SOURCE_DIR}/common/usb_common.c
+#    ${CMAKE_SOURCE_DIR}/common/spi.c
+)
+
+#file(GLOB libb100_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
+#file(GLOB libb100_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
+#list(APPEND libb100_sources ${libb100_c_sources} ${libb100_a51_sources})
+
+add_library(libb100 STATIC ${libb100_sources})
+
+# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
+set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
+set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
+set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
+
+add_custom_command(
+        OUTPUT ${GPIF_SOURCE_OUTPUT}
+        DEPENDS ${EDIT_GPIF_B100}
+        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_B100} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
+        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
+)
+
+#file(GLOB b100_sources *.c)
+set(b100_sources 
+    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+    usrp_main.c
+    usrp_common.c 
+    board_specific.c 
+    fpga_load.c 
+    fpga_rev2.c 
+    usrp_gpif.c 
+    usb_descriptors.a51
+    eeprom_io.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+set_source_files_properties(
+    ${CMAKE_CURRENT_SOURCE_DIR}/usrp_main.c
+    PROPERTIES COMPILE_FLAGS "--std-sdcc99 --opt-code-speed --fommit-frame-pointer"
+)
+
+add_executable(b100_fw ${b100_sources})
+target_link_libraries(b100_fw libb100)
+
+set(eeprom1p_sources
+    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
+    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+add_custom_target(b100_eeprom ALL
+    DEPENDS b100_boot
+    COMMAND objcopy -I ihex -O binary b100_boot.ihx b100_boot.bin
+    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r2 b100_boot.bin b100_eeprom.bin
+)
+
+add_executable(b100_boot ${eeprom1p_sources})
+target_link_libraries(b100_boot libb100)
diff --git a/firmware/fx2/b100/board_specific.c b/firmware/fx2/b100/board_specific.c
new file mode 100644
index 000000000..993d925b3
--- /dev/null
+++ b/firmware/fx2/b100/board_specific.c
@@ -0,0 +1,70 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usrp_common.h"
+
+void
+set_led_0 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED0;
+  else
+    USRP_PC &= ~bmPC_LED0;
+}
+
+void 
+set_led_1 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED1;
+  else
+    USRP_PC &= ~bmPC_LED1;
+}
+
+void
+toggle_led_0 (void)
+{
+  USRP_PC ^= bmPC_LED0;
+}
+
+void
+toggle_led_1 (void)
+{
+  USRP_PC ^= bmPC_LED1;
+}
+
+void
+set_sleep_bits (unsigned char bits, unsigned char mask)
+{
+  // NOP on usrp1
+}
+
+static xdata unsigned char xbuf[1];
+
+void
+init_board (void)
+{
+  //init_spi ();
+
+  //USRP_PC &= ~bmPC_nRESET;	// active low reset
+  //USRP_PC |= bmPC_nRESET;
+}
diff --git a/firmware/fx2/b100/eeprom_io.c b/firmware/fx2/b100/eeprom_io.c
new file mode 100644
index 000000000..9eeb53636
--- /dev/null
+++ b/firmware/fx2/b100/eeprom_io.c
@@ -0,0 +1,65 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "eeprom_io.h"
+#include "i2c.h"
+#include "delay.h"
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len)
+{
+  // We setup a random read by first doing a "zero byte write".
+  // Writes carry an address.  Reads use an implicit address.
+
+  static xdata unsigned char cmd[1];
+  cmd[0] = eeprom_offset;
+  if (!i2c_write(i2c_addr, cmd, 1))
+    return 0;
+
+  return i2c_read(i2c_addr, buf, len);
+}
+
+
+#if 0
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len)
+{
+  static xdata unsigned char cmd[2];
+  unsigned char ok;
+
+  while (len-- > 0){
+    cmd[0] = eeprom_offset++;
+    cmd[1] = *buf++;
+    ok = i2c_write(i2c_addr, cmd, 2);
+    mdelay(10);		// delay 10ms worst case write time
+    if (!ok)
+      return 0;
+  }
+  return 1;
+}
+
+#endif
diff --git a/firmware/fx2/b100/eeprom_io.h b/firmware/fx2/b100/eeprom_io.h
new file mode 100644
index 000000000..558017b12
--- /dev/null
+++ b/firmware/fx2/b100/eeprom_io.h
@@ -0,0 +1,38 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_EEPROM_IO_H
+#define INCLUDED_EEPROM_IO_H
+
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len);
+
+
+#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/b100/fpga_load.c b/firmware/fx2/b100/fpga_load.c
new file mode 100644
index 000000000..54ef54ab3
--- /dev/null
+++ b/firmware/fx2/b100/fpga_load.c
@@ -0,0 +1,193 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "fpga_load.h"
+#include "delay.h"
+
+/*
+ * setup altera FPGA serial load (PS).
+ *
+ * On entry:
+ *	don't care
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_begin (void)
+{
+  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
+  udelay (40);					// wait 40 us
+  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
+
+  if (UC_BOARD_HAS_FPGA){
+    // FIXME should really cap this loop with a counter so we
+    //   don't hang forever on a hardware failure.
+    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
+      ;
+  }
+
+  // ready to xfer now
+
+  return 1;
+}
+
+/*
+ * clock out the low bit of bits.
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+
+
+#if 0
+
+static void
+clock_out_config_byte (unsigned char bits)
+{
+  unsigned char i;
+
+  // clock out configuration byte, least significant bit first
+
+  for (i = 0; i < 8; i++){
+
+    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
+    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
+    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
+
+    bits = bits >> 1;
+  }
+}
+	
+#else
+
+static void 
+clock_out_config_byte (unsigned char bits) _naked
+{
+    _asm
+	mov	a, dpl
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	ret	
+
+    _endasm;
+}
+
+#endif
+
+static void
+clock_out_bytes (unsigned char bytecount,
+		 unsigned char xdata *p)
+{
+  while (bytecount-- > 0)
+    clock_out_config_byte (*p++);
+}
+
+/*
+ * Transfer block of bytes from packet to FPGA serial configuration port
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+{
+  clock_out_bytes (bytecount, p);
+  return 1;
+}
+
+/*
+ * check for successful load...
+ */
+unsigned char
+fpga_load_end (void)
+{
+  unsigned char status = USRP_ALTERA_CONFIG;
+
+  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
+    return 1;
+
+  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
+    return 0;
+
+  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
+    return 1;					// everything's cool
+
+  // I don't think this should happen.  It indicates that
+  // programming is still in progress.
+
+  return 0;
+}
diff --git a/firmware/fx2/b100/fpga_rev2.c b/firmware/fx2/b100/fpga_rev2.c
new file mode 100644
index 000000000..326a01732
--- /dev/null
+++ b/firmware/fx2/b100/fpga_rev2.c
@@ -0,0 +1,51 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "fpga.h"
+#include "fpga_regs_common.h"
+#include "usrp_common.h"
+#include "usrp_globals.h"
+
+unsigned char g_tx_reset = 0;
+unsigned char g_rx_reset = 0;
+
+void
+fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+{
+	//nop
+}
+
+
+static xdata unsigned char regval[4] = {0, 0, 0, 0};
+
+// Resets both AD9862's and the FPGA serial bus interface.
+
+void
+fpga_set_reset (unsigned char on)
+{
+  on &= 0x1;
+
+  if (on){
+  }
+  else
+    ;
+}
diff --git a/firmware/fx2/b100/fpga_rev2.h b/firmware/fx2/b100/fpga_rev2.h
new file mode 100644
index 000000000..0773d1cd7
--- /dev/null
+++ b/firmware/fx2/b100/fpga_rev2.h
@@ -0,0 +1,44 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef INCLUDED_FPGA_REV1_H
+#define INCLUDED_FPGA_REV1_H
+
+/*
+ * return TRUE if FPGA internal fifo has room for a single packet
+ */
+#define fpga_has_room_for_data_packet()	(!(GPIFREADYSTAT & bmDATA_FIFO_FULL))
+#define fpga_has_room_for_ctrl_packet()	(!(GPIFREADYSTAT & bmCTRL_FIFO_FULL))
+
+/*
+ * return TRUE if FPGA internal fifo has at least one packet available
+ */
+#define fpga_has_data_packet_avail()		(!(GPIFREADYSTAT & bmDATA_EMPTY))
+#define fpga_has_ctrl_packet_avail()            (!(GPIFREADYSTAT & bmCTRL_EMPTY))
+
+#define fx2_has_ctrl_packet_avail()         (!(EP24FIFOFLGS & EP4FIFOEMPTY))
+#define fx2_has_data_packet_avail()         (!(EP24FIFOFLGS & EP2FIFOEMPTY))
+
+#define fx2_has_room_for_ctrl_packet()      (!(EP8CS & bmEPFULL))
+#define fx2_has_room_for_data_packet()      (!(EP6CS & bmEPFULL))
+
+#define fx2_gpif_is_idle()                  (GPIFTRIG & bmGPIF_IDLE) 
+
+#endif /* INCLUDED_FPGA_REV1_H */
diff --git a/firmware/fx2/b100/gpif.c b/firmware/fx2/b100/gpif.c
new file mode 100644
index 000000000..b499e4fcf
--- /dev/null
+++ b/firmware/fx2/b100/gpif.c
@@ -0,0 +1,292 @@
+// This program configures the General Programmable Interface (GPIF) for FX2.     

+// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 

+//                                                                                

+// DO NOT EDIT ...                  

+// GPIF Initialization              

+// Interface Timing      Async        

+// Internal Ready Init   IntRdy=1     

+// CTL Out Tristate-able Binary       

+// SingleWrite WF Select     1     

+// SingleRead WF Select      0     

+// FifoWrite WF Select       3     

+// FifoRead WF Select        2     

+// Data Bus Idle Drive   Tristate     

+// END DO NOT EDIT                  

+                                    

+// DO NOT EDIT ...       

+// GPIF Wave Names       

+// Wave 0   = singlerd     

+// Wave 1   = singlewr     

+// Wave 2   = FIFORd       

+// Wave 3   = FIFOWr       

+                         

+// GPIF Ctrl Outputs   Level   

+// CTL 0    = WEN#     CMOS        

+// CTL 1    = REN#     CMOS        

+// CTL 2    = OE#      CMOS        

+// CTL 3    = EP       CMOS        

+// CTL 4    = unused   CMOS        

+// CTL 5    = unused   CMOS        

+                               

+// GPIF Rdy Inputs         

+// RDY0     = EF#            

+// RDY1     = FF#            

+// RDY2     = DRDY         

+// RDY3     = CRDY         

+// RDY4     = unused         

+// RDY5     = TCXpire        

+// FIFOFlag = FIFOFlag       

+// IntReady = IntReady       

+// END DO NOT EDIT         

+// DO NOT EDIT ...                                                                         

+//                                                                                         

+// GPIF Waveform 0: singlerd                                                                

+//                                                                                         

+// Interval     0         1         2         3         4         5         6     Idle (7) 

+//          _________ _________ _________ _________ _________ _________ _________ _________

+//                                                                                         

+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           

+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            

+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           

+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             

+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             

+//   Term A                                                                                

+//   LFunc                                                                                 

+//   Term B                                                                                

+// Branch1                                                                                 

+// Branch0                                                                                 

+// Re-Exec                                                                                 

+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            

+// WEN#         0         0         0         0         0         0         0         0    

+// REN#         0         0         0         0         0         0         0         0    

+// OE#          0         0         0         0         0         0         0         0    

+// CLRST        0         0         0         0         0         0         0         0    

+// unused       0         0         0         0         0         0         0         0    

+// BOGUS        0         0         0         0         0         0         0         0    

+//                     

+// END DO NOT EDIT     

+// DO NOT EDIT ...                                                                         

+//                                                                                         

+// GPIF Waveform 1: singlewr                                                                

+//                                                                                         

+// Interval     0         1         2         3         4         5         6     Idle (7) 

+//          _________ _________ _________ _________ _________ _________ _________ _________

+//                                                                                         

+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           

+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           

+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           

+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             

+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             

+//   Term A           EF#                                                                  

+//   LFunc            AND                                                                  

+//   Term B           EF#                                                                  

+// Branch1            ThenIdle                                                             

+// Branch0            ElseIdle                                                             

+// Re-Exec            No                                                                   

+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            

+// WEN#         0         1         1         1         1         1         1         0    

+// REN#         0         0         0         0         0         0         0         0    

+// OE#          0         0         0         0         0         0         0         0    

+// CLRST        0         0         0         0         0         0         0         0    

+// unused       0         0         0         0         0         0         0         0    

+// BOGUS        0         0         0         0         0         0         0         0    

+//                     

+// END DO NOT EDIT     

+// DO NOT EDIT ...                                                                         

+//                                                                                         

+// GPIF Waveform 2: FIFORd                                                                  

+//                                                                                         

+// Interval     0         1         2         3         4         5         6     Idle (7) 

+//          _________ _________ _________ _________ _________ _________ _________ _________

+//                                                                                         

+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           

+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            

+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           

+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             

+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             

+//   Term A           TCXpire             TCXpire                                          

+//   LFunc            AND                 AND                                              

+//   Term B           TCXpire             TCXpire                                          

+// Branch1            Then 2              ThenIdle                                         

+// Branch0            Else 1              ElseIdle                                         

+// Re-Exec            No                  No                                               

+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            

+// WEN#         0         0         0         0         0         0         0         0    

+// REN#         1         0         0         0         0         0         0         0    

+// OE#          1         1         1         0         0         0         0         0    

+// CLRST        0         0         0         0         0         0         0         0    

+// unused       0         0         0         0         0         0         0         0    

+// BOGUS        0         0         0         0         0         0         0         0    

+//                     

+// END DO NOT EDIT     

+// DO NOT EDIT ...                                                                         

+//                                                                                         

+// GPIF Waveform 3: FIFOWr                                                                  

+//                                                                                         

+// Interval     0         1         2         3         4         5         6     Idle (7) 

+//          _________ _________ _________ _________ _________ _________ _________ _________

+//                                                                                         

+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           

+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           

+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           

+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             

+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             

+//   Term A           TCXpire                                                              

+//   LFunc            AND                                                                  

+//   Term B           TCXpire                                                              

+// Branch1            ThenIdle                                                             

+// Branch0            Else 1                                                               

+// Re-Exec            No                                                                   

+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            

+// WEN#         0         0         0         0         0         0         0         0    

+// REN#         0         0         0         0         0         0         0         0    

+// OE#          0         0         0         0         0         0         0         0    

+// CLRST        0         0         0         0         0         0         0         0    

+// unused       0         0         0         0         0         0         0         0    

+// BOGUS        0         0         0         0         0         0         0         0    

+//                     

+// END DO NOT EDIT     

+                                              

+// GPIF Program Code                          

+                                              

+// DO NOT EDIT ...                            

+#include "fx2.h"                            

+#include "fx2regs.h"                        

+#include "fx2sdly.h"     // SYNCDELAY macro 

+// END DO NOT EDIT                            

+                                              

+// DO NOT EDIT ...                     

+const char xdata WaveData[128] =     

+{                                      

+// Wave 0 

+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,

+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,

+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,

+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,

+// Wave 1 

+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,

+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,

+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,

+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,

+// Wave 2 

+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,

+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,

+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,

+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,

+// Wave 3 

+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,

+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,

+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,

+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,

+};                     

+// END DO NOT EDIT     

+                       

+// DO NOT EDIT ...                     

+const char xdata FlowStates[36] =   

+{                                      

+/* Wave 0 FlowStates */ 0x81,0x2D,0x0E,0x00,0x00,0x04,0x03,0x02,0x00,

+/* Wave 1 FlowStates */ 0x81,0x2D,0x09,0x00,0x00,0x04,0x03,0x02,0x00,

+/* Wave 2 FlowStates */ 0x81,0x2D,0x06,0x00,0x00,0x04,0x03,0x02,0x00,

+/* Wave 3 FlowStates */ 0x81,0x2D,0x01,0x00,0x00,0x04,0x03,0x02,0x00,

+};                     

+// END DO NOT EDIT     

+                       

+// DO NOT EDIT ...                                               

+const char xdata InitData[7] =                                   

+{                                                                

+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     

+};                                                               

+// END DO NOT EDIT                                               

+                                                                 

+// TO DO: You may add additional code below.

+

+void GpifInit( void )

+{

+  BYTE i;

+ 

+  // Registers which require a synchronization delay, see section 15.14

+  // FIFORESET        FIFOPINPOLAR

+  // INPKTEND         OUTPKTEND

+  // EPxBCH:L         REVCTL

+  // GPIFTCB3         GPIFTCB2

+  // GPIFTCB1         GPIFTCB0

+  // EPxFIFOPFH:L     EPxAUTOINLENH:L

+  // EPxFIFOCFG       EPxGPIFFLGSEL

+  // PINFLAGSxx       EPxFIFOIRQ

+  // EPxFIFOIE        GPIFIRQ

+  // GPIFIE           GPIFADRH:L

+  // UDMACRCH:L       EPxGPIFTRIG

+  // GPIFTRIG

+  

+  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...

+  //      ...these have been replaced by GPIFTC[B3:B0] registers

+ 

+  // 8051 doesn't have access to waveform memories 'til

+  // the part is in GPIF mode.

+ 

+  IFCONFIG = 0xEE;

+  // IFCLKSRC=1   , FIFOs executes on internal clk source

+  // xMHz=1       , 48MHz internal clk rate

+  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz

+  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk

+  // ASYNC=1      , master samples asynchronous

+  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF

+  // IFCFG[1:0]=10, FX2 in GPIF master mode

+ 

+  GPIFABORT = 0xFF;  // abort any waveforms pending

+ 

+  GPIFREADYCFG = InitData[ 0 ];

+  GPIFCTLCFG = InitData[ 1 ];

+  GPIFIDLECS = InitData[ 2 ];

+  GPIFIDLECTL = InitData[ 3 ];

+  GPIFWFSELECT = InitData[ 5 ];

+  GPIFREADYSTAT = InitData[ 6 ];

+ 

+  // use dual autopointer feature... 

+  AUTOPTRSETUP = 0x07;          // inc both pointers, 

+                                // ...warning: this introduces pdata hole(s)

+                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)

+  

+  // source

+  AUTOPTRH1 = MSB( &WaveData );

+  AUTOPTRL1 = LSB( &WaveData );

+  

+  // destination

+  AUTOPTRH2 = 0xE4;

+  AUTOPTRL2 = 0x00;

+ 

+  // transfer

+  for ( i = 0x00; i < 128; i++ )

+  {

+    EXTAUTODAT2 = EXTAUTODAT1;

+  }

+ 

+// Configure GPIF Address pins, output initial value,

+  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]

+  OEC = 0xFF;         // and as outputs

+  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]

+  OEE |= 0x80;        // and as output

+ 

+// ...OR... tri-state GPIFADR[8:0] pins

+//  PORTCCFG = 0x00;  // [7:0] as port I/O

+//  OEC = 0x00;       // and as inputs

+//  PORTECFG &= 0x7F; // [8] as port I/O

+//  OEE &= 0x7F;      // and as input

+ 

+// GPIF address pins update when GPIFADRH/L written

+  SYNCDELAY;                    // 

+  GPIFADRH = 0x00;    // bits[7:1] always 0

+  SYNCDELAY;                    // 

+  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000

+ 

+// Configure GPIF FlowStates registers for Wave 0 of WaveData

+  FLOWSTATE = FlowStates[ 0 ];

+  FLOWLOGIC = FlowStates[ 1 ];

+  FLOWEQ0CTL = FlowStates[ 2 ];

+  FLOWEQ1CTL = FlowStates[ 3 ];

+  FLOWHOLDOFF = FlowStates[ 4 ];

+  FLOWSTB = FlowStates[ 5 ];

+  FLOWSTBEDGE = FlowStates[ 6 ];

+  FLOWSTBHPERIOD = FlowStates[ 7 ];

+}

+ 

diff --git a/firmware/fx2/b100/usb_descriptors.a51 b/firmware/fx2/b100/usb_descriptors.a51
new file mode 100644
index 000000000..cc71833fe
--- /dev/null
+++ b/firmware/fx2/b100/usb_descriptors.a51
@@ -0,0 +1,499 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+;;;
+	
+;;; USB Descriptor table for the B100
+;;; 
+;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
+;;; and 5 interfaces.  
+;;; 
+;;;	interface 0:	command and status (ep0 COMMAND)
+;;;	interface 1:	Transmit path (ep2 OUT BULK)
+;;;	interface 2:	Receive path (ep6 IN BULK)
+
+;;; interface 3:  Command transmit path (ep4 OUT BULK) for FPGA comms
+;;; interface 4:  Command receive path (ep8 IN BULK) for FPGA comms
+
+	.module usb_descriptors
+	
+	VID_FREE	 = 0x2500	; Free Software Folks
+	PID_USRP	 = 0x0001	; B100
+
+	;; We distinguish configured from unconfigured USRPs using the Device ID.
+	;; If the MSB of the DID is 0, the device is unconfigured.
+	;; The LSB of the DID is reserved for hardware revs.
+	
+	DID_USRP	 = 0x0100	; Device ID (bcd)
+
+	
+	DSCR_DEVICE	 =   1	; Descriptor type: Device
+	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
+	DSCR_STRING	 =   3	; Descriptor type: String
+	DSCR_INTRFC	 =   4	; Descriptor type: Interface
+	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
+	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
+	
+	DSCR_DEVICE_LEN	 =  18
+	DSCR_CONFIG_LEN  =   9
+	DSCR_INTRFC_LEN  =   9
+	DSCR_ENDPNT_LEN  =   7
+	DSCR_DEVQUAL_LEN =  10
+	
+	ET_CONTROL	 =   0	; Endpoint type: Control
+	ET_ISO		 =   1	; Endpoint type: Isochronous
+	ET_BULK		 =   2	; Endpoint type: Bulk
+	ET_INT		 =   3	; Endpoint type: Interrupt
+	
+	
+	;; configuration attributes
+	bmSELF_POWERED	=	1 << 6
+
+;;; --------------------------------------------------------
+;;;	external ram data
+;;;--------------------------------------------------------
+	
+	.area USBDESCSEG    (XDATA)
+	
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at high speed (480Mb/sec)
+;;; ----------------------------------------------------------------
+	
+	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
+
+	;; The .even directive isn't really honored by the linker.  Bummer!
+	;; (There's no way to specify an alignment requirement for a given area,
+	;; hence when they're concatenated together, even doesn't work.)
+	;; 
+	;; We work around this by telling the linker to put USBDESCSEG
+	;; at 0xE000 absolute.  This means that the maximimum length of this
+	;; segment is 480 bytes, leaving room for the two hash slots 
+	;; at 0xE1EO to 0xE1FF.  
+	;; 
+	;; As of July 7, 2004, this segment is 326 bytes long
+  ;; As of Sept 2, 2010, this segment is 416 bytes long
+	
+_high_speed_device_descr::
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_0::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_SERIAL	; iSerial number (string index)
+	.db	1		; bNumConfigurations
+	
+;;; describes the other speed (12Mb/sec)
+	.even
+_high_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB (LSB)
+	.db	>0x0200		; bcdUSB (MSB)
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 12Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_high_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
+	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
+	.db	5		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+
+	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	1		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_TX_PATH	; iInterface (description)
+
+	;; interface 1's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x02		; bEndpointAddress (ep 2 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 2 (receive path, ep6 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	2		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_RX_PATH	; iInterface (description)
+
+	;; interface 2's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x86		; bEndpointAddress (ep 6 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 3 (FPGA command OUT path, ep4 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	3		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_FPGA_COMMAND_OUT_PATH	; iInterface (description)
+
+	;; interface 3's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x04		; bEndpointAddress (ep 4 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<32		; wMaxPacketSize (LSB)
+	.db	>32		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 4 (FPGA command IN path, ep8 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	4		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_FPGA_COMMAND_IN_PATH	; iInterface (description)
+
+	;; interface 4's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x88		; bEndpointAddress (ep 8 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<32		; wMaxPacketSize (LSB)
+	.db	>32		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+
+_high_speed_config_descr_end:		
+
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at full speed (12Mb/sec)
+;;; ----------------------------------------------------------------
+
+	.even
+_full_speed_device_descr::	
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_1::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_NONE		; iSerial number (None)
+	.db	1		; bNumConfigurations
+	
+	
+;;; describes the other speed (480Mb/sec)
+	.even
+_full_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB
+	.db	>0x0200		; bcdUSB
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 480Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_full_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
+	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
+	.db	1		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+	
+_full_speed_config_descr_end:	
+	
+;;; ----------------------------------------------------------------
+;;;			string descriptors
+;;; ----------------------------------------------------------------
+
+_nstring_descriptors::
+	.db	(_string_descriptors_end - _string_descriptors) / 2
+
+_string_descriptors::
+	.db	<str0, >str0
+	.db	<str1, >str1
+	.db	<str2, >str2
+	.db	<str3, >str3
+	.db	<str4, >str4
+	.db	<str5, >str5
+	.db	<str6, >str6
+	.db <str7, >str7
+	.db <str8, >str8
+_string_descriptors_end:
+
+	SI_NONE = 0
+	;; str0 contains the language ID's.
+	.even
+str0:	.db	str0_end - str0
+	.db	DSCR_STRING
+	.db	0
+	.db	0
+	.db	<0x0409		; magic code for US English (LSB)
+	.db	>0x0409		; magic code for US English (MSB)
+str0_end:
+
+	SI_VENDOR = 1
+	.even
+str1:	.db	str1_end - str1
+	.db	DSCR_STRING
+	.db	'F, 0		; 16-bit unicode
+	.db	'r, 0
+	.db	'e, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	'o, 0
+	.db	'f, 0
+	.db	't, 0
+	.db	'w, 0
+	.db	'a, 0
+	.db	'r, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'F, 0
+	.db	'o, 0
+	.db	'l, 0
+	.db	'k, 0
+	.db	's, 0
+str1_end:
+
+	SI_PRODUCT = 2
+	.even
+str2:	.db	str2_end - str2
+	.db	DSCR_STRING
+	.db	'U, 0
+	.db	'S, 0
+	.db	'R, 0
+	.db	'P, 0
+	.db '1, 0
+	.db 'P, 0
+	.db	' , 0
+	.db	'R, 0
+	.db	'e, 0
+	.db	'v, 0
+	.db	' , 0
+_usb_desc_hw_rev_ascii_patch_location_0::
+	.db	'?, 0
+str2_end:
+
+	SI_COMMAND_AND_STATUS = 3
+	.even
+str3:	.db	str3_end - str3
+	.db	DSCR_STRING
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'&, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	't, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'u, 0
+	.db	's, 0
+str3_end:
+
+	SI_TX_PATH = 4
+	.even
+str4:	.db	str4_end - str4
+	.db	DSCR_STRING
+	.db	'T, 0
+	.db	'r, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	's, 0
+	.db	'm, 0
+	.db	'i, 0
+	.db	't, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str4_end:
+
+	SI_RX_PATH = 5
+	.even
+str5:	.db	str5_end - str5
+	.db	DSCR_STRING
+	.db	'R, 0
+	.db	'e, 0
+	.db	'c, 0
+	.db	'e, 0
+	.db	'i, 0
+	.db	'v, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str5_end:
+
+	SI_SERIAL = 6
+	.even
+str6:	.db	str6_end - str6
+	.db	DSCR_STRING
+_usb_desc_serial_number_ascii::
+	.db	'3, 0
+	.db	'., 0
+	.db	'1, 0
+	.db	'4, 0
+	.db	'1, 0
+	.db	'5, 0
+	.db	'9, 0
+	.db	'3, 0
+str6_end:
+
+	SI_FPGA_COMMAND_OUT_PATH = 7
+	.even
+str7:	.db	str7_end - str7
+	.db	DSCR_STRING
+	.db	'F, 0
+	.db	'P, 0
+	.db	'G, 0
+	.db	'A, 0
+	.db	' , 0
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'O, 0
+	.db	'u, 0
+	.db	't, 0
+str7_end:
+
+	SI_FPGA_COMMAND_IN_PATH = 8
+	.even
+str8:	.db	str8_end - str8
+	.db	DSCR_STRING
+	.db	'F, 0
+	.db	'P, 0
+	.db	'G, 0
+	.db	'A, 0
+	.db	' , 0
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'I, 0
+	.db	'n, 0
+str8_end:
diff --git a/firmware/fx2/b100/usrp_common.c b/firmware/fx2/b100/usrp_common.c
new file mode 100644
index 000000000..4b6dde881
--- /dev/null
+++ b/firmware/fx2/b100/usrp_common.c
@@ -0,0 +1,108 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/* 
+ * common code for USRP
+ */
+
+#include "usrp_common.h"
+
+void init_board (void);
+
+void
+init_usrp (void)
+{
+  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
+  CKCON = 0;		// MOVX takes 2 cycles
+
+  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
+
+  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
+  SYNCDELAY;
+
+  // configure IO ports (B and D are used by GPIF)
+
+  IOA = bmPORT_A_INITIAL;	// Port A initial state
+  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
+
+  IOC = bmPORT_C_INITIAL;	// Port C initial state
+  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
+
+  IOE = bmPORT_E_INITIAL;	// Port E initial state
+  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
+
+
+  //REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
+  // SYNCDELAY;
+  
+  // configure end points
+
+  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
+  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
+
+  EP2CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
+  EP4CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
+  EP6CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
+  EP8CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
+
+  // reset FIFOs
+
+  FIFORESET = bmNAKALL;					SYNCDELAY;
+  FIFORESET = 2;					SYNCDELAY;
+  FIFORESET = 4;					SYNCDELAY;
+  FIFORESET = 6;					SYNCDELAY;
+  FIFORESET = 8;					SYNCDELAY;
+  FIFORESET = 0;					SYNCDELAY;
+  
+  // configure end point FIFOs
+
+  // let core see 0 to 1 transistion of autoout bit
+
+  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
+  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
+  EP6FIFOCFG = bmZEROLENIN | bmWORDWIDE;			SYNCDELAY;
+  //EP6FIFOCFG = bmWORDWIDE;			SYNCDELAY;
+  EP4FIFOCFG =             bmWORDWIDE;      SYNCDELAY;
+  EP4FIFOCFG = bmAUTOOUT | bmWORDWIDE;      SYNCDELAY;
+  EP8FIFOCFG = bmAUTOIN  | bmWORDWIDE;      SYNCDELAY;
+
+  EP0BCH = 0;			SYNCDELAY;
+
+  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
+
+  EP1OUTBC = 0;			SYNCDELAY;
+
+  EP2GPIFFLGSEL = 0x00;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
+  EP6GPIFFLGSEL = 0x00;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
+  EP4GPIFFLGSEL = 0x00;   SYNCDELAY;
+  EP8GPIFFLGSEL = 0x00;   SYNCDELAY;
+
+  // set autoin length for EP6
+  // FIXME should be f(enumeration)
+
+  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
+  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
+
+  EP8AUTOINLENH = (32) >> 8; SYNCDELAY;
+  EP8AUTOINLENL = (32) & 0xff; SYNCDELAY;
+
+  init_board ();
+}
+
diff --git a/firmware/fx2/b100/usrp_main.c b/firmware/fx2/b100/usrp_main.c
new file mode 100644
index 000000000..7558fadb8
--- /dev/null
+++ b/firmware/fx2/b100/usrp_main.c
@@ -0,0 +1,394 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "usrp_commands.h"
+#include "fpga.h"
+#include "usrp_gpif_inline.h"
+#include "timer.h"
+#include "i2c.h"
+#include "isr.h"
+#include "usb_common.h"
+#include "fx2utils.h"
+#include "usrp_globals.h"
+#include "usrp_i2c_addr.h"
+#include <string.h>
+#include "eeprom_io.h"
+#include "usb_descriptors.h"
+
+/*
+ * offsets into boot eeprom for configuration values
+ */
+#define	HW_REV_OFFSET		  5
+#define SERIAL_NO_OFFSET	248
+#define SERIAL_NO_LEN		  8
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+
+unsigned char g_tx_enable = 0;
+unsigned char g_rx_enable = 0;
+unsigned char g_rx_overrun = 0;
+unsigned char g_tx_underrun = 0;
+bit enable_gpif = 0;
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+
+void clear_fpga_data_fifo(void);
+
+static void
+get_ep0_data (void)
+{
+  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
+
+  while (EP0CS & bmEPBUSY)	// wait for busy to clear
+    ;
+}
+
+static void initialize_gpif_buffer(int ep) {
+  //clear the GPIF buffers on startup to keep crap out of the data path
+  FIFORESET = 0x80; SYNCDELAY; //activate NAKALL
+  FIFORESET = ep; SYNCDELAY;
+  FIFORESET = 0x00; SYNCDELAY;
+}
+
+/*
+ * Handle our "Vendor Extension" commands on endpoint 0.
+ * If we handle this one, return non-zero.
+ */
+unsigned char
+app_vendor_cmd (void)
+{
+  if (bRequestType == VRT_VENDOR_IN){
+
+    /////////////////////////////////
+    //    handle the IN requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_GET_STATUS: //this is no longer done via FX2 -- the FPGA will be queried instead
+      return 0;
+      break;
+
+    case VRQ_I2C_READ:
+      if (!i2c_read (wValueL, EP0BUF, wLengthL)) return 0;
+        EP0BCH = 0;
+        EP0BCL = wLengthL;
+        break;
+      
+    case VRQ_SPI_READ:
+      return 0;
+
+    case VRQ_FW_COMPAT:
+        EP0BCH = 0;
+        EP0BCL = 2;
+        break;
+
+    default:
+      return 0;
+    }
+  }
+
+  else if (bRequestType == VRT_VENDOR_OUT){
+
+    /////////////////////////////////
+    //    handle the OUT requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_SET_LED:
+      switch (wIndexL){
+      case 0:
+        set_led_0 (wValueL);
+        break;
+	
+      case 1:
+        set_led_1 (wValueL);
+        break;
+	
+      default:
+        return 0;
+      }
+      break;
+      
+    case VRQ_FPGA_LOAD:
+      switch (wIndexL){			// sub-command
+      case FL_BEGIN:
+        return fpga_load_begin ();
+	
+      case FL_XFER:
+        get_ep0_data ();
+        return fpga_load_xfer (EP0BUF, EP0BCL);
+	
+      case FL_END:
+        return fpga_load_end ();
+	
+      default:
+        return 0;
+      }
+      break;
+
+    case VRQ_FPGA_SET_RESET:
+      //fpga_set_reset (wValueL);
+      break;
+
+    case VRQ_I2C_WRITE:
+      get_ep0_data ();
+      if (!i2c_write (wValueL, EP0BUF, EP0BCL)) return 0;
+      //USRP_LED_REG ^= bmLED1;
+      break;
+      
+    case VRQ_RESET_GPIF:
+      initialize_gpif_buffer(wValueL);
+      break;
+      
+    case VRQ_ENABLE_GPIF:
+      enable_gpif = (wValueL != 0) ? 1 : 0;
+      set_led_1(enable_gpif);
+      break;
+    
+    case VRQ_CLEAR_FPGA_FIFO:
+        clear_fpga_data_fifo();
+        break;
+
+    default:
+      return 0;
+    }
+
+  }
+  else
+    return 0;    // invalid bRequestType
+
+  return 1;
+}
+
+static int short_pkt_state = 0;
+#define SHORT_PACKET_DETECTED (short_pkt_state != bitSHORT_PACKET_SIGNAL)
+
+//yes, this is a little opaque
+//basically this is necessary because while all the logic to inform the FPGA
+//of what we're trying to do via the CTL pins is contained within the flowstates,
+//we need to assert the endpoint select pin one clock cycle before the flowstate starts.
+//this is the job of the wave descriptor. rather than switch between waves, since that
+//involves a little more setup, we just modify the wave table on the fly.
+inline static void setup_wave_data_read(void) {
+    GPIF_WAVE_DATA[80] = 0x06;
+    GPIF_WAVE_DATA[81] = 0x06;
+}
+
+inline static void setup_wave_ctrl_read(void) {
+    GPIF_WAVE_DATA[80] = 0x0E;
+    GPIF_WAVE_DATA[81] = 0x0E;
+}
+
+inline static void setup_wave_data_write(void) {
+    GPIF_WAVE_DATA[112] = 0x00;
+    GPIF_WAVE_DATA[113] = 0x00;
+}
+
+inline static void setup_wave_ctrl_write(void) {
+    GPIF_WAVE_DATA[112] = 0x08;
+    GPIF_WAVE_DATA[113] = 0x08;
+}
+
+inline static void handle_data_write(void) {
+    GPIFTCB1 = 0x01;	//SYNCDELAY;
+    GPIFTCB0 = 0x00;
+    setup_flowstate_data_write ();
+    setup_wave_data_write();
+    GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
+    SYNCDELAY;
+    while (!(GPIFTRIG & bmGPIF_IDLE));
+}
+
+inline static void handle_ctrl_write(void) {
+    GPIFTCB1 = 0x00;
+    GPIFTCB0 = 0x10;
+    setup_flowstate_ctrl_write ();
+    setup_wave_ctrl_write();
+    GPIFTRIG = bmGPIF_EP4_START | bmGPIF_WRITE; 	// start the xfer
+    SYNCDELAY;
+    while (!(GPIFTRIG & bmGPIF_IDLE));
+}
+
+inline static void handle_data_read(void) {
+    GPIFTCB1 = 0x01;
+    GPIFTCB0 = 0x00;
+    setup_flowstate_data_read ();
+    setup_wave_data_read();
+    short_pkt_state = bitSHORT_PACKET_SIGNAL;
+    GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
+    SYNCDELAY;
+    while (!(GPIFTRIG & bmGPIF_IDLE));
+    INPKTEND = 0x06;	// tell USB we filled buffer (6 is our endpoint num)
+    SYNCDELAY;
+    if(SHORT_PACKET_DETECTED) {
+        while(!(EP6CS & bmEPEMPTY)); //wait for packet to send
+        INPKTEND = 0x06; //send a ZLP
+        //toggle_led_1(); //FIXME DEBUG
+    }
+}
+
+inline static void handle_ctrl_read(void) {
+    GPIFTCB1 = 0x00;
+    GPIFTCB0 = 0x10;
+    setup_flowstate_ctrl_read ();
+    setup_wave_ctrl_read();
+    GPIFTRIG = bmGPIF_EP8_START | bmGPIF_READ; 	// start the xfer
+    SYNCDELAY;
+    while (!(GPIFTRIG & bmGPIF_IDLE));
+    INPKTEND = 8;	// tell USB we filled buffer (8 is our endpoint num)
+}
+
+//clear the FPGA datapath by reading but not submitting, instead clearing the FIFO after each transaction
+void clear_fpga_data_fifo(void) {
+    while(fpga_has_data_packet_avail()) {
+        GPIFTCB1 = 0x01;
+        GPIFTCB0 = 0x00;
+        setup_flowstate_data_read ();
+        setup_wave_data_read();
+        GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
+        SYNCDELAY;
+        while (!(GPIFTRIG & bmGPIF_IDLE));
+        initialize_gpif_buffer(6); //reset the FIFO instead of committing it
+    }
+}
+
+static void
+main_loop (void)
+{
+  while (1){
+    if (usb_setup_packet_avail ())
+      usb_handle_setup_packet ();
+
+    if(enable_gpif){
+        if  (fx2_has_ctrl_packet_avail()    && fpga_has_room_for_ctrl_packet()) handle_ctrl_write();
+        if  (fx2_has_room_for_ctrl_packet() && fpga_has_ctrl_packet_avail())    handle_ctrl_read();
+        
+        //we do this
+        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
+        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
+        //five times so that
+        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
+        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
+        //we can piggyback
+        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
+        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
+        //data transfers
+        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
+        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
+        //without loop overhead
+        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
+        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
+    }
+  }
+}
+
+/*
+ * called at 100 Hz from timer2 interrupt
+ *
+ * Toggle led 0
+ */
+void
+isr_tick (void) interrupt
+{
+  static unsigned char	count = 1;
+  
+  if (--count == 0){
+    count = 50;
+    USRP_LED_REG ^= bmLED0;
+  }
+
+  clear_timer_irq ();
+}
+
+/*
+ * Read h/w rev code and serial number out of boot eeprom and
+ * patch the usb descriptors with the values.
+ */
+void
+patch_usb_descriptors(void)
+{
+  static xdata unsigned char hw_rev;
+  static xdata unsigned char serial_no[8];
+  unsigned char i;
+
+  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
+  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
+  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
+  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
+
+  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
+
+  for (i = 0; i < SERIAL_NO_LEN; i++){
+    unsigned char ch = serial_no[i];
+    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
+      ch = '0';
+    usb_desc_serial_number_ascii[i << 1] = ch;
+  }
+}
+
+void
+main (void)
+{
+  enable_gpif = 0;
+
+  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
+  
+  init_usrp ();
+  init_gpif ();
+  
+  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
+  //IFCONFIG |= bmGSTATE;			// no conflict, start with it on
+
+  set_led_0 (0);
+  set_led_1 (0);
+  
+  EA = 0;		// disable all interrupts
+
+  patch_usb_descriptors();
+
+  setup_autovectors ();
+  usb_install_handlers ();
+  //hook_timer_tick ((unsigned short) isr_tick);
+
+  EIEX4 = 1;		// disable INT4 FIXME
+  EA = 1;		// global interrupt enable
+
+  fx2_renumerate ();	// simulates disconnect / reconnect
+
+  setup_flowstate_common();
+  main_loop ();
+}
diff --git a/firmware/fx2/b100/usrp_regs.h b/firmware/fx2/b100/usrp_regs.h
new file mode 100644
index 000000000..775b5dfd3
--- /dev/null
+++ b/firmware/fx2/b100/usrp_regs.h
@@ -0,0 +1,126 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * These are the register definitions for the Rev 1 USRP prototype
+ * The Rev 1 is the version with the AD9862's and daughterboards
+ */
+
+#ifndef _B100_REGS_H_
+#define _B100_REGS_H_
+
+#include "fx2regs.h"
+
+/*
+ * Port A (bit addressable):
+ */
+
+#define USRP_PA			IOA		// Port A
+#define	USRP_PA_OE		OEA		// Port A direction register
+
+#define	USRP_ALTERA_CONFIG	USRP_PA   // Now on port A, not C
+
+#define bmALTERA_DCLK		bmBIT0
+#define bmALTERA_NCONFIG	bmBIT1
+#define bmALTERA_DATA0		bmBIT3
+#define bmALTERA_NSTATUS	bmBIT4
+#define bmALTERA_CONF_DONE	bmBIT5
+#define bmRESET_FPGA_FIFOS  bmBIT7
+
+
+#define	bmALTERA_BITS		(bmALTERA_DCLK			\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DATA0		\
+				 | bmALTERA_NSTATUS		\
+				 | bmALTERA_CONF_DONE		\
+				)
+
+
+#define	bmPORT_A_OUTPUTS	(bmALTERA_DCLK			\
+			 	 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DATA0		\
+				)
+
+#define	bmPORT_A_INITIAL	0
+
+sbit at 0x80+0 bitALTERA_DCLK;	// 0x80 is the bit address of PORT A
+sbit at 0x80+2 bitSHORT_PACKET_SIGNAL;
+sbit at 0x80+3 bitALTERA_DATA0;
+
+
+/* Port B: GPIF	FD[7:0]			*/
+
+/*
+ * Port C (bit addressable):
+ *    5:1 FPGA configuration
+ */
+
+#define	USRP_PC			IOC		// Port C
+#define	USRP_PC_OE		OEC		// Port C direction register
+
+#define	bmPC_nRESET		0 //bmBIT0		// reset line to codecs (active low)
+#define	bmPC_LED0		bmBIT0		// active low
+#define	bmPC_LED1		bmBIT1		// active low
+
+#define	bmPORT_C_OUTPUTS	(bmPC_LED0 | bmPC_LED1)
+#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
+
+
+#define	USRP_LED_REG		USRP_PC
+#define	bmLED0			bmPC_LED0
+#define	bmLED1			bmPC_LED1
+
+
+/* Port D: GPIF	FD[15:8]		*/
+
+/* Port E: not bit addressible		*/
+
+#define	USRP_PE			IOE		// Port E
+#define	USRP_PE_OE		OEE		// Port E direction register
+
+#define	bmPORT_E_OUTPUTS	(0)
+#define	bmPORT_E_INITIAL	(0)
+
+/*
+ * FPGA output lines that are tied to FX2 RDYx inputs.
+ * These are readable using GPIFREADYSTAT.
+ */
+//#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
+//#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
+
+#define bmDATA_EMPTY            bmBIT0 //data output FIFO has no data ready
+#define bmDATA_FIFO_FULL        bmBIT1 //data input FIFO is full
+#define bmCTRL_EMPTY            bmBIT2 //control output FIFO has no data ready
+#define bmCTRL_FIFO_FULL        bmBIT3 //control input FIFO is full
+
+// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
+// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
+
+/*
+ * FPGA input lines that are tied to the FX2 CTLx outputs.
+ *
+ * These are controlled by the GPIF microprogram...
+ */
+// WE					bmBIT0	// usbctl[0] write enable
+// RE					bmBIT1	// usbctl[1] read enable
+// OE					bmBIT2	// usbctl[2] output enable
+// EP                   bmBIT3  // usbctl[3] endpoint select (data/ctrl)
+
+#endif /* _USRP_REV1_REGS_H_ */