e3xx: Added firmware for battery based devices.

Note: This firmware does *not* support Rev B units.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>

1 files changed, 97 insertions, 0 deletions

diff --git a/firmware/e300/battery/io.h b/firmware/e300/battery/io.h
new file mode 100644
index 000000000..81c007268
--- /dev/null
+++ b/firmware/e300/battery/io.h
@@ -0,0 +1,97 @@
+/* USRP E310 IO helpers
+ * Copyright (C) 2014 Ettus Research
+ * This file is part of the USRP E310 Firmware
+ * The USRP E310 Firmware is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ * The USRP E310 Firmware is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with the USRP E310 Firmware. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+* \file io.h
+* \brief IO helper functions to manipulate the MCUs pins
+*/
+
+#ifndef IO_H
+#define IO_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#define IO_PX(port, pin) ((uint8_t)(((port - 'A') << 4) + pin))
+#define IO_PA(pin) IO_PX('A', pin)
+#define IO_PB(pin) IO_PX('B', pin)
+#define IO_PC(pin) IO_PX('C', pin)
+#define IO_PD(pin) IO_PX('D', pin)
+
+typedef const uint8_t io_pin_t;
+
+/**
+ * \brief Make pin an output pin
+ *
+ * \param pin The pin to modify 
+ */
+void io_output_pin(io_pin_t pin);
+
+/**
+ * \brief Make pin an input pin
+ *
+ * \param pin The pin to modify
+ */
+void io_input_pin(io_pin_t pin);
+
+/**
+ * \brief Check if pin is an output
+ *
+ * \param pin The pin to query
+ * \return Returns true if the pin is configured as output
+ */
+bool io_is_output(io_pin_t pin);
+
+/**
+ * \brief Check if pin is an input
+ *
+ * \param pin The pin to query
+ * \return Returns true if the pin is configured as input
+ */
+bool io_is_input(io_pin_t pin);
+
+/**
+ * \brief If the pin is in input mode, this will enable the pull-up,
+ *        if the pin is in output mode, this will set a logic high level 
+ *
+ * \param[in] pin The pin to modify
+ */
+void io_set_pin(io_pin_t pin);
+
+/**
+ * \brief If the pin is in input mode this will disable the pull-up
+ *        if the pin is in output mode, this will set a logic low level
+ *
+ * \param[in] pin The pin to modify
+ */
+void io_clear_pin(io_pin_t pin);
+
+/**
+ * \brief If the pin is in input mode, this returns true if the pull-up is active,
+ *        if the pin is in output mode, this returns true if a logic high is set
+ * \param[in] pin The pin to query
+ * \return True if pin is set, False otherwise
+ */
+bool io_is_pin_set(io_pin_t pin);
+
+
+/**
+ * \brief If the pin is in input mode, this returns the logic input value
+ * \param[in] pin The pin to query
+ * \return Returns true if a logic high is observed on the input pin
+ */
+bool io_test_pin(io_pin_t pin);
+
+#endif /* IO_H */