timing fix, delays the ethernet flow control by a cycle to get it across the chip. Seems ok in testing.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10523 221aa14e-8319-0410-a670-987f0aec2ac5

2 files changed, 16 insertions, 3 deletions

diff --git a/eth/rtl/verilog/MAC_tx.v b/eth/rtl/verilog/MAC_tx.v
index 50b08dffb..bbf331022 100644
--- a/eth/rtl/verilog/MAC_tx.v
+++ b/eth/rtl/verilog/MAC_tx.v
@@ -127,6 +127,11 @@ wire            MAC_tx_addr_init    ;
 wire            MAC_tx_addr_rd      ;

 wire[7:0]       MAC_tx_addr_data    ;

 

+

+   reg 		xon_gen_d1, xoff_gen_d1;

+   always @(posedge Clk) xon_gen_d1 <= xon_gen;

+   always @(posedge Clk) xoff_gen_d1 <= xoff_gen;

+   

 //******************************************************************************        

 //instantiation                                                              

 //****************************************************************************** 

@@ -147,9 +152,9 @@ MAC_tx_ctrl U_MAC_tx_ctrl(
  //flow control           (//flow control         ),           

 .pause_apply              (pause_apply            ),            

 .pause_quanta_sub         (pause_quanta_sub       ),        

-.xoff_gen                 (xoff_gen               ),        

+.xoff_gen                 (xoff_gen_d1            ),        

 .xoff_gen_complete        (xoff_gen_complete      ),            

-.xon_gen                  (xon_gen                ),            

+.xon_gen                  (xon_gen_d1             ),            

 .xon_gen_complete         (xon_gen_complete       ),        

  //MAC_tx_FF              (//MAC_tx_FF            ),           

 .Fifo_data                (Fifo_data              ),            

diff --git a/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v b/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v
index 0fd7c603e..8da2e253c 100644
--- a/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v
+++ b/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v
@@ -627,7 +627,15 @@ always @ (posedge Clk or posedge Reset)
         pause_quanta_sub    <=0;

 

 // FIXME  The below probably won't work if the pause request comes when we are in the wrong state

-   wire clear_xonxoff = (Current_state==StateSendPauseFrame) & (IPLengthCounter==17);

+   reg clear_xonxoff;

+   always @(posedge Clk or posedge Reset)

+     if(Reset)

+       clear_xonxoff <= 0;

+     else if((Current_state==StateSendPauseFrame) & (IPLengthCounter==17))

+       clear_xonxoff <= 1;

+     else if(~xon_gen & ~xoff_gen)

+       clear_xonxoff <= 0;

+   

 always @ (posedge Clk or posedge Reset)

     if (Reset) 

         xoff_gen_complete   <=0;