Remove old mac. Good riddance.

1 files changed, 0 insertions, 144 deletions

diff --git a/eth/tx_prot_engine.v b/eth/tx_prot_engine.v
deleted file mode 100644
index 894d74a11..000000000
--- a/eth/tx_prot_engine.v
+++ /dev/null
@@ -1,144 +0,0 @@
-
-module tx_prot_engine
-  (input clk, input rst,
-   
-   // To MAC
-   input Tx_mac_wa,
-   output Tx_mac_wr,
-   output [31:0] Tx_mac_data,
-   output [1:0] Tx_mac_BE,
-   output Tx_mac_sop,
-   output Tx_mac_eop,
-
-   // To buffer interface
-   input [31:0] rd_dat_i,
-   output rd_read_o,
-   output rd_done_o,
-   output rd_error_o,
-   input rd_sop_i,
-   input rd_eop_i,
-
-   // To control
-   input set_stb,
-   input [7:0] set_addr,
-   input [31:0] set_data,
-
-   // Protocol Stuff
-   input [15:0] rx_fifo_status,
-   input [7:0] rx_seqnum
-   //input [7:0] tx_channel,
-   //input [7:0] tx_flags
-   );
-
-   wire [3:0] 	hdr_adr;
-   wire [31:0] 	hdr_dat;
-   wire [7:0] 	tx_channel;
-   
-   header_ram #(.REGNUM(32),.WIDTH(32)) tx_header_ram
-     (.clk(clk),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .addr(hdr_adr),.q(hdr_dat));
-
-   setting_reg #(.my_addr(32)) sr_channel
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),.in(set_data),
-      .out(tx_channel),.changed());
-   
-   // Might as well use a shortfifo here since they are basically free
-   wire  empty, full, sfifo_write, sfifo_read;
-   wire [33:0] sfifo_in, sfifo_out;
-   
-   shortfifo #(.WIDTH(34)) txmac_sfifo
-     (.clk(clk),.rst(rst),.clear(0),
-      .datain(sfifo_in),.write(sfifo_write),.full(full),
-      .dataout(sfifo_out),.read(sfifo_read),.empty(empty));
-
-   // MAC side signals
-   // Inputs -- Tx_mac_wa, sfifo_out, empty
-   // outputs -- sfifo_read, Tx_mac_data, Tx_mac_wr, Tx_mac_BE, Tx_mac_sop, Tx_mac_eop
-   
-   //  We are allowed to do one more write after we are told the FIFO is full
-   //  This allows us to register the _wa signal and speed up timing.
-   reg 	       tx_mac_wa_d1;
-   always @(posedge clk)
-     tx_mac_wa_d1 <= Tx_mac_wa;
-
-   reg [2:0]   prot_state;
-   localparam  PROT_IDLE = 0;
-   localparam  PROT_HDR1 = 1;
-   localparam  PROT_HDR2 = 2;
-   localparam  PROT_HDR3 = 3;
-   localparam  PROT_HDR4 = 4;
-   localparam  PROT_HDR5 = 5;
-   localparam  PROT_PKT  = 6;
-
-   reg [7:0]   tx_seqnum;
-   reg 	       all_match;
-   always @(posedge clk)
-     if(rst) 
-       tx_seqnum <= 0;
-     else if(set_stb & (set_addr == 36))
-       tx_seqnum <= set_data[7:0];
-     else if(tx_mac_wa_d1 & all_match & (prot_state == PROT_HDR5))
-       tx_seqnum <= tx_seqnum + 1;
-   
-   always @(posedge clk)
-     if(rst)
-       prot_state <= PROT_IDLE;
-     else
-       if(tx_mac_wa_d1 & ~empty)
-	 case(prot_state)
-	   PROT_IDLE :
-	     prot_state <= PROT_HDR1;
-	   PROT_HDR1 :
-	     prot_state <= PROT_HDR2;
-	   PROT_HDR2 :
-	     prot_state <= PROT_HDR3;
-	   PROT_HDR3 :
-	     prot_state <= PROT_HDR4;
-	   PROT_HDR4 :
-	     prot_state <= PROT_HDR5;
-	   PROT_HDR5 :
-	     prot_state <= PROT_PKT;
-	   PROT_PKT :
-	     if(sfifo_out[32] & ~empty)
-	       prot_state <= PROT_IDLE;
-	   default :
-	     prot_state <= PROT_IDLE;
-	 endcase // case(prot_state)
-
-   assign      hdr_adr = {1'b0,prot_state};
-   wire        match = (hdr_dat == sfifo_out[31:0]);   
-   always @(posedge clk)
-     if(prot_state == PROT_IDLE)
-       all_match <= 1;
-     else if(tx_mac_wa_d1 & ~empty &
-	     ((prot_state==PROT_HDR1)|(prot_state==PROT_HDR2)|(prot_state==PROT_HDR3)))
-       all_match <= all_match & match;
-   
-   localparam  ETH_TYPE = 16'hBEEF;
-   assign      Tx_mac_data = 
-	       ((prot_state == PROT_HDR5) & all_match) ? {rx_fifo_status,tx_seqnum,rx_seqnum} :
-	       sfifo_out[31:0];
-   assign      sfifo_read = (prot_state != PROT_IDLE) & ~empty & tx_mac_wa_d1;
-   assign      Tx_mac_wr = sfifo_read;
-   assign      Tx_mac_BE = 0;  // Since we only deal with packets that are multiples of 32 bits long
-   assign      Tx_mac_sop = sfifo_out[33];
-   assign      Tx_mac_eop = sfifo_out[32];
-
-   // BUFFER side signals
-   reg 	       xfer_active;
-   always @(posedge clk)
-     if(rst)
-       xfer_active <= 0;
-     else if(rd_eop_i & ~full)
-       xfer_active <= 0;
-     else if(rd_sop_i)
-       xfer_active <= 1;
-   
-   assign      sfifo_in = {rd_sop_i, rd_eop_i, rd_dat_i};
-   assign      sfifo_write = xfer_active & ~full;
-
-   assign      rd_read_o = sfifo_write;
-   assign      rd_done_o = 0;  // Always send everything we're given?
-   assign      rd_error_o = 0;  // No possible error situations?
-   
-endmodule // tx_prot_engine