diff options
| author | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:00:25 -0700 |
|---|---|---|
| committer | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:07:59 -0700 |
| commit | 1ff74777e47f3a2edefc5154484f2bdcb86c1a13 (patch) | |
| tree | 04f94ef4f7f06a210f7532592829332c7f2621f0 /eth/bench/verilog/jumbos.scr | |
| parent | 7b8f65256b5ea300187ebb6a359df2fa707a295d (diff) | |
| parent | 42fc55415af499980901c7787f44c7e74b4a9ce1 (diff) | |
| download | uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.gz uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.bz2 uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.zip | |
Merge branch 'new_eth' of http://gnuradio.org/git/matt into master
* 'new_eth' of http://gnuradio.org/git/matt: (42 commits)
Fix warnings, mostly from implicitly defined wires or unspecified widths
fullchip sim now compiles again, after moving eth and models over to new simple_gemac
remove unused opencores
remove debugging code
no idea where this came from, it shouldn't be here
Copied wb_1master back from quad radio
Remove old mac. Good riddance.
remove unused port
More xilinx fifos, more clean up of our fifos
might as well use a cascade fifo to help timing and give a little more capacity
fix a typo which caused tx glitches
Untested fixes for getting serdes onto the new fifo system. Compiles, at least
Implement Eth flow control using pause frames
parameterized fifo sizes, some reformatting
remove unused old style fifo
allow control of whether or not to honor flow control, adds some debug lines
debug the rx side
no longer used, replaced by newfifo version
remove special last_line adjustment from ethernet port
Firmware now inserts mac source address value in each frame.
...
Diffstat (limited to 'eth/bench/verilog/jumbos.scr')
| -rw-r--r-- | eth/bench/verilog/jumbos.scr | 27 |
1 files changed, 0 insertions, 27 deletions
diff --git a/eth/bench/verilog/jumbos.scr b/eth/bench/verilog/jumbos.scr deleted file mode 100644 index f48870bd5..000000000 --- a/eth/bench/verilog/jumbos.scr +++ /dev/null @@ -1,27 +0,0 @@ -// This test performs transmission & reception of several Jumbo-frames of ~2Kbytes each
-// At the same time it demonstrates the wire-speed capabilities of the core
-
-// Read from register 24 to confirm that Rx CRC check is enabled
-03 00 18 00 01 ff ff
-
-// Set speed to 1000 Mbps
-01 00 22 00 04
-
-// Setup Tx and Rx MAC addresses and type field to "IP"
-// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
-10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
-
-// Transmit a 2047-byte frame 3 times - and expect them to be received again!
-20 07 ff 00 03
-// Transmit a 2048-byte frame 3 times - and expect them to be received again!
-20 08 00 00 03
-// Transmit a 2049-byte frame 3 times - and expect them to be received again!
-20 08 01 00 03
-// Transmit a 2050-byte frame 3 times - and expect them to be received again!
-20 08 02 00 03
-
-// Wait (indefinitely) for missing Rx packets
-22 00 00
-
-// Halt
-FF
|