diff options
| author | jcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5> | 2008-09-08 01:00:12 +0000 |
|---|---|---|
| committer | jcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5> | 2008-09-08 01:00:12 +0000 |
| commit | 61f2f0214c5999ea42a368a4fc99f03d8eb28d1e (patch) | |
| tree | e7e24a9adc05ff1422fe3ada9926a51634741b47 /eth/bench/verilog/jumbos.scr | |
| download | uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.gz uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.bz2 uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.zip | |
Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
Diffstat (limited to 'eth/bench/verilog/jumbos.scr')
| -rw-r--r-- | eth/bench/verilog/jumbos.scr | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/eth/bench/verilog/jumbos.scr b/eth/bench/verilog/jumbos.scr new file mode 100644 index 000000000..f48870bd5 --- /dev/null +++ b/eth/bench/verilog/jumbos.scr @@ -0,0 +1,27 @@ +// This test performs transmission & reception of several Jumbo-frames of ~2Kbytes each
+// At the same time it demonstrates the wire-speed capabilities of the core
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 2047-byte frame 3 times - and expect them to be received again!
+20 07 ff 00 03
+// Transmit a 2048-byte frame 3 times - and expect them to be received again!
+20 08 00 00 03
+// Transmit a 2049-byte frame 3 times - and expect them to be received again!
+20 08 01 00 03
+// Transmit a 2050-byte frame 3 times - and expect them to be received again!
+20 08 02 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
|