Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 60 insertions, 0 deletions

diff --git a/control_lib/simple_uart_tx.v b/control_lib/simple_uart_tx.v
new file mode 100644
index 000000000..e11a347ed
--- /dev/null
+++ b/control_lib/simple_uart_tx.v
@@ -0,0 +1,60 @@
+
+module simple_uart_tx
+  #(parameter DEPTH=0)
+    (input clk, input rst, 
+     input [7:0] fifo_in, input fifo_write, output [7:0] fifo_level, output fifo_full, 
+     input [15:0] clkdiv, output baudclk, output reg tx);
+   
+   reg [15:0] 	  baud_ctr;
+   reg [3:0] 	  bit_ctr;
+   
+   wire 	  read, empty;
+   wire [7:0] 	  char_to_send;
+   
+   medfifo #(.WIDTH(8),.DEPTH(DEPTH)) fifo
+     (.clk(clk),.rst(rst),
+      .datain(fifo_in),.write(fifo_write),.full(fifo_full),
+      .dataout(char_to_send),.read(read),.empty(empty),
+      .clear(0),.space(fifo_level),.occupied() );
+   
+   always @(posedge clk)
+     if(rst)
+       baud_ctr <= 0;
+     else if (baud_ctr >= clkdiv)
+       baud_ctr <= 0;
+     else
+       baud_ctr <= baud_ctr + 1;
+
+   always @(posedge clk)
+     if(rst)
+       bit_ctr <= 0;
+     else if(baud_ctr == clkdiv)
+       if(bit_ctr == 9)
+	 bit_ctr <= 0;
+       else if(bit_ctr != 0)
+	 bit_ctr <= bit_ctr + 1;
+       else if(~empty)
+	 bit_ctr <= 1;
+   
+   always @(posedge clk)
+     if(rst)
+       tx <= 1;
+     else
+       case(bit_ctr)
+	 0 : tx <= 1;
+	 1 : tx <= 0;
+	 2 : tx <= char_to_send[0];
+	 3 : tx <= char_to_send[1];
+	 4 : tx <= char_to_send[2];
+	 5 : tx <= char_to_send[3];
+	 6 : tx <= char_to_send[4];
+	 7 : tx <= char_to_send[5];
+	 8 : tx <= char_to_send[6];
+	 9 : tx <= char_to_send[7];
+	 default : tx <= 1;
+       endcase // case(bit_ctr)
+
+   assign 	  read = (bit_ctr == 9) && (baud_ctr == clkdiv);
+   assign 	  baudclk = (baud_ctr == 1);  // Only for debug purposes
+   
+endmodule // simple_uart_tx