Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 49 insertions, 0 deletions

diff --git a/control_lib/settings_bus.v b/control_lib/settings_bus.v
new file mode 100644
index 000000000..d01a30ab4
--- /dev/null
+++ b/control_lib/settings_bus.v
@@ -0,0 +1,49 @@
+
+// Grab settings off the wishbone bus, send them out to our simpler bus on the fast clock
+
+module settings_bus
+  #(parameter AWIDTH=16, parameter DWIDTH=32)
+    (input wb_clk, 
+     input wb_rst, 
+     input [AWIDTH-1:0] wb_adr_i,
+     input [DWIDTH-1:0] wb_dat_i,
+     input wb_stb_i,
+     input wb_we_i,
+     output reg wb_ack_o,
+     input sys_clk,
+     output strobe,
+     output reg [7:0] addr,
+     output reg [31:0] data);
+
+   reg 	    stb_int, stb_int_d1;
+   
+   always @(posedge wb_clk)
+     if(wb_rst)
+       begin
+	  stb_int <= 1'b0;
+	  addr <= 8'd0;
+	  data <= 32'd0;
+       end
+     else if(wb_we_i & wb_stb_i)
+       begin
+	  stb_int <= 1'b1;
+	  addr <= wb_adr_i[9:2];
+	  data <= wb_dat_i;
+       end
+     else
+       stb_int <= 1'b0;
+
+   always @(posedge wb_clk)
+     if(wb_rst)
+       wb_ack_o <= 0;
+     else
+       wb_ack_o <= wb_stb_i & ~wb_ack_o;
+
+   always @(posedge wb_clk)
+     stb_int_d1 <= stb_int;
+
+   //assign strobe = stb_int & ~stb_int_d1;
+   assign strobe = stb_int & wb_ack_o;
+          
+endmodule // settings_bus
+