Merge branch 'bugfix/sbx_tuning'

4 files changed, 220 insertions, 178 deletions

diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp
index 9db29e65a..5b713c6d7 100644
--- a/host/lib/usrp/dboard/db_sbx_common.cpp
+++ b/host/lib/usrp/dboard/db_sbx_common.cpp
@@ -21,6 +21,137 @@ using namespace uhd;
 using namespace uhd::usrp;
 using namespace boost::assign;
 
+/***********************************************************************
+ * ADF 4350/4351 Tuning Utility
+ **********************************************************************/
+sbx_xcvr::sbx_versionx::adf435x_tuning_settings sbx_xcvr::sbx_versionx::_tune_adf435x_synth(
+    double target_freq,
+    double ref_freq,
+    const adf435x_tuning_constraints& constraints,
+    double& actual_freq)
+{
+    //Default invalid value for actual_freq
+    actual_freq = 0;
+
+    double pfd_freq = 0;
+    boost::uint16_t R = 0, BS = 0, N = 0, FRAC = 0, MOD = 0;
+    boost::uint16_t RFdiv = static_cast<boost::uint16_t>(constraints.rf_divider_range.start());
+    bool D = false, T = false;
+
+    //Reference doubler for 50% duty cycle
+    //If ref_freq < 12.5MHz enable the reference doubler
+    D = (ref_freq <= constraints.ref_doubler_threshold);
+
+    static const double MIN_VCO_FREQ = 2.2e9;
+    static const double MAX_VCO_FREQ = 4.4e9;
+
+    //increase RF divider until acceptable VCO frequency
+    double vco_freq = target_freq;
+    while (vco_freq < MIN_VCO_FREQ && RFdiv < static_cast<boost::uint16_t>(constraints.rf_divider_range.stop())) {
+        vco_freq *= 2;
+        RFdiv *= 2;
+    }
+
+    /*
+     * The goal here is to loop though possible R dividers,
+     * band select clock dividers, N (int) dividers, and FRAC
+     * (frac) dividers.
+     *
+     * Calculate the N and F dividers for each set of values.
+     * The loop exits when it meets all of the constraints.
+     * The resulting loop values are loaded into the registers.
+     *
+     * from pg.21
+     *
+     * f_pfd = f_ref*(1+D)/(R*(1+T))
+     * f_vco = (N + (FRAC/MOD))*f_pfd
+     *    N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD
+     * f_rf = f_vco/RFdiv)
+     * f_actual = f_rf/2
+     */
+    for(R = 1; R <= 1023; R+=1){
+        //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T)
+        pfd_freq = ref_freq*(D?2:1)/(R*(T?2:1));
+
+        //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth)
+        if (pfd_freq > constraints.pfd_freq_max) continue;
+
+        //ignore fractional part of tuning
+        //N is computed from target_freq and not vco_freq because the feedback
+        //mode is set to FEEDBACK_SELECT_DIVIDED
+        N = boost::uint16_t(std::floor(target_freq/pfd_freq));
+
+        //keep N > minimum int divider requirement
+        if (N < static_cast<boost::uint16_t>(constraints.int_range.start())) continue;
+
+        for(BS=1; BS <= 255; BS+=1){
+            //keep the band select frequency at or below band_sel_freq_max
+            //constraint on band select clock
+            if (pfd_freq/BS > constraints.band_sel_freq_max) continue;
+            goto done_loop;
+        }
+    } done_loop:
+
+    //Fractional-N calculation
+    MOD = 4095; //max fractional accuracy
+    //N is computed from target_freq and not vco_freq because the feedback
+    //mode is set to FEEDBACK_SELECT_DIVIDED
+    FRAC = static_cast<boost::uint16_t>((target_freq/pfd_freq - N)*MOD);
+    if (constraints.force_frac0) {
+        if (FRAC > (MOD / 2)) { //Round integer such that actual freq is closest to target
+            N++;
+        }
+        FRAC = 0;
+    }
+
+    //Reference divide-by-2 for 50% duty cycle
+    // if R even, move one divide by 2 to to regs.reference_divide_by_2
+    if(R % 2 == 0) {
+        T = true;
+        R /= 2;
+    }
+
+    //Typical phase resync time documented in data sheet pg.24
+    static const double PHASE_RESYNC_TIME = 400e-6;
+
+    //actual frequency calculation
+    actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(D?2:1)/(R*(T?2:1)));
+
+    //load the settings
+    adf435x_tuning_settings settings;
+    settings.frac_12_bit = FRAC;
+    settings.int_16_bit = N;
+    settings.mod_12_bit = MOD;
+    settings.clock_divider_12_bit = std::max<boost::uint16_t>(1, std::ceil(PHASE_RESYNC_TIME*pfd_freq/MOD));
+    settings.r_counter_10_bit = R;
+    settings.r_divide_by_2_en = T;
+    settings.r_doubler_en = D;
+    settings.band_select_clock_div = BS;
+    settings.rf_divider = RFdiv;
+    settings.feedback_after_divider = true;
+
+    UHD_LOGV(often)
+        << boost::format("ADF 435X Frequencies (MHz): REQUESTED=%0.9f, ACTUAL=%0.9f"
+        ) % (target_freq/1e6) % (actual_freq/1e6) << std::endl
+        << boost::format("ADF 435X Intermediates (MHz): VCO=%0.2f, PFD=%0.2f, BAND=%0.2f, REF=%0.2f"
+        ) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) % (ref_freq/1e6) << std::endl
+        << boost::format("ADF 435X Settings: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d"
+        ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl;
+
+    UHD_ASSERT_THROW((settings.frac_12_bit          & ((boost::uint16_t)~0xFFF)) == 0);
+    UHD_ASSERT_THROW((settings.mod_12_bit           & ((boost::uint16_t)~0xFFF)) == 0);
+    UHD_ASSERT_THROW((settings.clock_divider_12_bit & ((boost::uint16_t)~0xFFF)) == 0);
+    UHD_ASSERT_THROW((settings.r_counter_10_bit     & ((boost::uint16_t)~0x3FF)) == 0);
+
+    UHD_ASSERT_THROW(vco_freq >= MIN_VCO_FREQ and vco_freq <= MAX_VCO_FREQ);
+    UHD_ASSERT_THROW(settings.rf_divider >= static_cast<boost::uint16_t>(constraints.rf_divider_range.start()));
+    UHD_ASSERT_THROW(settings.rf_divider <= static_cast<boost::uint16_t>(constraints.rf_divider_range.stop()));
+    UHD_ASSERT_THROW(settings.int_16_bit >= static_cast<boost::uint16_t>(constraints.int_range.start()));
+    UHD_ASSERT_THROW(settings.int_16_bit <= static_cast<boost::uint16_t>(constraints.int_range.stop()));
+
+    return settings;
+}
+
 
 /***********************************************************************
  * Register the SBX dboard (min freq, max freq, rx div2, tx div2)
@@ -362,4 +493,3 @@ void sbx_xcvr::flash_leds(void) {
     this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO));
     this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO));
 }
-
diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp
index 4f3a2eeaa..e9bb2434c 100644
--- a/host/lib/usrp/dboard/db_sbx_common.hpp
+++ b/host/lib/usrp/dboard/db_sbx_common.hpp
@@ -181,6 +181,34 @@ protected:
         ~sbx_versionx(void) {}
 
         virtual double set_lo_freq(dboard_iface::unit_t unit, double target_freq) = 0;
+    protected:
+        struct adf435x_tuning_constraints {
+            bool            force_frac0;
+            double          ref_doubler_threshold;
+            double          pfd_freq_max;
+            double          band_sel_freq_max;
+            uhd::range_t    rf_divider_range;
+            uhd::range_t    int_range;
+        };
+
+        struct adf435x_tuning_settings {
+            boost::uint16_t frac_12_bit;
+            boost::uint16_t int_16_bit;
+            boost::uint16_t mod_12_bit;
+            boost::uint16_t r_counter_10_bit;
+            bool            r_doubler_en;
+            bool            r_divide_by_2_en;
+            boost::uint16_t clock_divider_12_bit;
+            boost::uint8_t  band_select_clock_div;
+            boost::uint16_t rf_divider;
+            bool            feedback_after_divider;
+        };
+
+        adf435x_tuning_settings _tune_adf435x_synth(
+            double target_freq,
+            double ref_freq,
+            const adf435x_tuning_constraints& constraints,
+            double& actual_freq);
     };
 
     /*!
diff --git a/host/lib/usrp/dboard/db_sbx_version3.cpp b/host/lib/usrp/dboard/db_sbx_version3.cpp
index 2765d530c..b0c9cd18f 100644
--- a/host/lib/usrp/dboard/db_sbx_version3.cpp
+++ b/host/lib/usrp/dboard/db_sbx_version3.cpp
@@ -63,85 +63,21 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar
         (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16)
     ;
 
-    double actual_freq, pfd_freq;
-    double ref_freq = self_base->get_iface()->get_clock_rate(unit);
-    int R=0, BS=0, N=0, FRAC=0, MOD=0;
-    int RFdiv = 1;
-    adf4350_regs_t::reference_divide_by_2_t T     = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED;
-    adf4350_regs_t::reference_doubler_t     D     = adf4350_regs_t::REFERENCE_DOUBLER_DISABLED;    
-
-    //Reference doubler for 50% duty cycle
-    // if ref_freq < 12.5MHz enable regs.reference_divide_by_2
-    if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED;
-
-    //increase RF divider until acceptable VCO frequency
-    double vco_freq = target_freq;
-    while (vco_freq < 2.2e9) {
-        vco_freq *= 2;
-        RFdiv *= 2;
-    }
-
     //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler)
     adf4350_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5;
 
-    /*
-     * The goal here is to loop though possible R dividers,
-     * band select clock dividers, N (int) dividers, and FRAC 
-     * (frac) dividers.
-     *
-     * Calculate the N and F dividers for each set of values.
-     * The loop exits when it meets all of the constraints.
-     * The resulting loop values are loaded into the registers.
-     *
-     * from pg.21
-     *
-     * f_pfd = f_ref*(1+D)/(R*(1+T))
-     * f_vco = (N + (FRAC/MOD))*f_pfd
-     *    N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD
-     * f_rf = f_vco/RFdiv)
-     * f_actual = f_rf/2
-     */
-    for(R = 1; R <= 1023; R+=1){
-        //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T)
-        pfd_freq = ref_freq*(1+D)/(R*(1+T));
-
-        //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth)
-        if (pfd_freq > 25e6) continue;
-
-        //ignore fractional part of tuning
-        N = int(std::floor(target_freq/pfd_freq));
-
-        //keep N > minimum int divider requirement
-        if (N < prescaler_to_min_int_div[prescaler]) continue;
-
-        for(BS=1; BS <= 255; BS+=1){
-            //keep the band select frequency at or below 100KHz
-            //constraint on band select clock
-            if (pfd_freq/BS > 100e3) continue;
-            goto done_loop;
-        }
-    } done_loop:
-
-    //Fractional-N calculation
-    MOD = 4095; //max fractional accuracy
-    FRAC = int((target_freq/pfd_freq - N)*MOD);
-
-    //Reference divide-by-2 for 50% duty cycle
-    // if R even, move one divide by 2 to to regs.reference_divide_by_2
-    if(R % 2 == 0){
-        T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED;
-        R /= 2;
-    }
-
-    //actual frequency calculation
-    actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T))));
+    adf435x_tuning_constraints tuning_constraints;
+    tuning_constraints.force_frac0 = false;
+    tuning_constraints.band_sel_freq_max = 100e3;
+    tuning_constraints.ref_doubler_threshold = 12.5e6;
+    tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095);  //INT is a 12-bit field
+    tuning_constraints.pfd_freq_max = 25e6;
+    tuning_constraints.rf_divider_range = uhd::range_t(1, 16);
 
-    UHD_LOGV(often)
-        << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl
-        << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d"
-            ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl
-        << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f"
-            ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl;
+    double actual_freq;
+    adf435x_tuning_settings tuning_settings = _tune_adf435x_synth(
+        target_freq, self_base->get_iface()->get_clock_rate(unit),
+        tuning_constraints, actual_freq);
 
     //load the register values
     adf4350_regs_t regs;
@@ -151,19 +87,25 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar
     else
         regs.output_power = adf4350_regs_t::OUTPUT_POWER_5DBM;
 
-    regs.frac_12_bit = FRAC;
-    regs.int_16_bit = N;
-    regs.mod_12_bit = MOD;
-    regs.clock_divider_12_bit = std::max(1, int(std::ceil(400e-6*pfd_freq/MOD)));
-    regs.feedback_select = adf4350_regs_t::FEEDBACK_SELECT_DIVIDED;
-    regs.clock_div_mode = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE;
-    regs.prescaler = prescaler;
-    regs.r_counter_10_bit = R;
-    regs.reference_divide_by_2 = T;
-    regs.reference_doubler = D;
-    regs.band_select_clock_div = BS;
-    UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv));
-    regs.rf_divider_select = rfdivsel_to_enum[RFdiv];
+    regs.frac_12_bit            = tuning_settings.frac_12_bit;
+    regs.int_16_bit             = tuning_settings.int_16_bit;
+    regs.mod_12_bit             = tuning_settings.mod_12_bit;
+    regs.clock_divider_12_bit   = tuning_settings.clock_divider_12_bit;
+    regs.feedback_select        = tuning_settings.feedback_after_divider ?
+                                    adf4350_regs_t::FEEDBACK_SELECT_DIVIDED :
+                                    adf4350_regs_t::FEEDBACK_SELECT_FUNDAMENTAL;
+    regs.clock_div_mode         = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE;
+    regs.prescaler              = prescaler;
+    regs.r_counter_10_bit       = tuning_settings.r_counter_10_bit;
+    regs.reference_divide_by_2  = tuning_settings.r_divide_by_2_en ?
+                                    adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED :
+                                    adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED;
+    regs.reference_doubler      = tuning_settings.r_doubler_en ?
+                                    adf4350_regs_t::REFERENCE_DOUBLER_ENABLED :
+                                    adf4350_regs_t::REFERENCE_DOUBLER_DISABLED;
+    regs.band_select_clock_div  = tuning_settings.band_select_clock_div;
+    UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider));
+    regs.rf_divider_select      = rfdivsel_to_enum[tuning_settings.rf_divider];
 
     //reset the N and R counter
     regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED;
diff --git a/host/lib/usrp/dboard/db_sbx_version4.cpp b/host/lib/usrp/dboard/db_sbx_version4.cpp
index 27fd68b05..8d95b0655 100644
--- a/host/lib/usrp/dboard/db_sbx_version4.cpp
+++ b/host/lib/usrp/dboard/db_sbx_version4.cpp
@@ -66,85 +66,21 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar
         (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV64)
     ;
 
-    double actual_freq, pfd_freq;
-    double ref_freq = self_base->get_iface()->get_clock_rate(unit);
-    int R=0, BS=0, N=0, FRAC=0, MOD=0;
-    int RFdiv = 1;
-    adf4351_regs_t::reference_divide_by_2_t T     = adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED;
-    adf4351_regs_t::reference_doubler_t     D     = adf4351_regs_t::REFERENCE_DOUBLER_DISABLED;    
-
-    //Reference doubler for 50% duty cycle
-    // if ref_freq < 12.5MHz enable regs.reference_divide_by_2
-    if(ref_freq <= 12.5e6) D = adf4351_regs_t::REFERENCE_DOUBLER_ENABLED;
-
-    //increase RF divider until acceptable VCO frequency
-    double vco_freq = target_freq;
-    while (vco_freq < 2.2e9) {
-        vco_freq *= 2;
-        RFdiv *= 2;
-    }
-
     //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler)
-    adf4351_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5;
-
-    /*
-     * The goal here is to loop though possible R dividers,
-     * band select clock dividers, N (int) dividers, and FRAC 
-     * (frac) dividers.
-     *
-     * Calculate the N and F dividers for each set of values.
-     * The loop exits when it meets all of the constraints.
-     * The resulting loop values are loaded into the registers.
-     *
-     * from pg.21
-     *
-     * f_pfd = f_ref*(1+D)/(R*(1+T))
-     * f_vco = (N + (FRAC/MOD))*f_pfd
-     *    N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD
-     * f_rf = f_vco/RFdiv)
-     * f_actual = f_rf/2
-     */
-    for(R = 1; R <= 1023; R+=1){
-        //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T)
-        pfd_freq = ref_freq*(1+D)/(R*(1+T));
-
-        //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth)
-        if (pfd_freq > 25e6) continue;
-
-        //ignore fractional part of tuning
-        N = int(std::floor(vco_freq/pfd_freq));
-
-        //keep N > minimum int divider requirement
-        if (N < prescaler_to_min_int_div[prescaler]) continue;
-
-        for(BS=1; BS <= 255; BS+=1){
-            //keep the band select frequency at or below 100KHz
-            //constraint on band select clock
-            if (pfd_freq/BS > 100e3) continue;
-            goto done_loop;
-        }
-    } done_loop:
-
-    //Fractional-N calculation
-    MOD = 4095; //max fractional accuracy
-    FRAC = int((target_freq/pfd_freq - N)*MOD);
-
-    //Reference divide-by-2 for 50% duty cycle
-    // if R even, move one divide by 2 to to regs.reference_divide_by_2
-    if(R % 2 == 0){
-        T = adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED;
-        R /= 2;
-    }
+    adf4351_regs_t::prescaler_t prescaler = target_freq > 3.6e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5;
 
-    //actual frequency calculation
-    actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T))));
+    adf435x_tuning_constraints tuning_constraints;
+    tuning_constraints.force_frac0 = false;
+    tuning_constraints.band_sel_freq_max = 100e3;
+    tuning_constraints.ref_doubler_threshold = 12.5e6;
+    tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095);  //INT is a 12-bit field
+    tuning_constraints.pfd_freq_max = 25e6;
+    tuning_constraints.rf_divider_range = uhd::range_t(1, 64);
 
-    UHD_LOGV(often)
-        << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl
-        << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d"
-            ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl
-        << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f"
-            ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl;
+    double actual_freq;
+    adf435x_tuning_settings tuning_settings = _tune_adf435x_synth(
+        target_freq, self_base->get_iface()->get_clock_rate(unit),
+        tuning_constraints, actual_freq);
 
     //load the register values
     adf4351_regs_t regs;
@@ -154,19 +90,25 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar
     else
         regs.output_power = adf4351_regs_t::OUTPUT_POWER_5DBM;
 
-    regs.frac_12_bit = FRAC;
-    regs.int_16_bit = N;
-    regs.mod_12_bit = MOD;
-    regs.clock_divider_12_bit = std::max(1, int(std::ceil(400e-6*pfd_freq/MOD)));
-    regs.feedback_select = adf4351_regs_t::FEEDBACK_SELECT_DIVIDED;
-    regs.clock_div_mode = adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE;
-    regs.prescaler = prescaler;
-    regs.r_counter_10_bit = R;
-    regs.reference_divide_by_2 = T;
-    regs.reference_doubler = D;
-    regs.band_select_clock_div = BS;
-    UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv));
-    regs.rf_divider_select = rfdivsel_to_enum[RFdiv];
+    regs.frac_12_bit            = tuning_settings.frac_12_bit;
+    regs.int_16_bit             = tuning_settings.int_16_bit;
+    regs.mod_12_bit             = tuning_settings.mod_12_bit;
+    regs.clock_divider_12_bit   = tuning_settings.clock_divider_12_bit;
+    regs.feedback_select        = tuning_settings.feedback_after_divider ?
+                                    adf4351_regs_t::FEEDBACK_SELECT_DIVIDED :
+                                    adf4351_regs_t::FEEDBACK_SELECT_FUNDAMENTAL;
+    regs.clock_div_mode         = adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE;
+    regs.prescaler              = prescaler;
+    regs.r_counter_10_bit       = tuning_settings.r_counter_10_bit;
+    regs.reference_divide_by_2  = tuning_settings.r_divide_by_2_en ?
+                                    adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED :
+                                    adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED;
+    regs.reference_doubler      = tuning_settings.r_doubler_en ?
+                                    adf4351_regs_t::REFERENCE_DOUBLER_ENABLED :
+                                    adf4351_regs_t::REFERENCE_DOUBLER_DISABLED;
+    regs.band_select_clock_div  = tuning_settings.band_select_clock_div;
+    UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider));
+    regs.rf_divider_select      = rfdivsel_to_enum[tuning_settings.rf_divider];
 
     //reset the N and R counter
     regs.counter_reset = adf4351_regs_t::COUNTER_RESET_ENABLED;