added enums to register map

1 files changed, 35 insertions, 29 deletions

diff --git a/host/lib/ic_reg_maps/gen_ad9522_regs.py b/host/lib/ic_reg_maps/gen_ad9522_regs.py
index 85c3e9f2b..63d8abe24 100755
--- a/host/lib/ic_reg_maps/gen_ad9522_regs.py
+++ b/host/lib/ic_reg_maps/gen_ad9522_regs.py
@@ -21,49 +21,49 @@
 # name addr[bit range inclusive] default optional enums
 ########################################################################
 REGS_TMPL="""\
-sdo_active                  0x000[7]                 0
-lsb_first_addr_incr         0x000[6]                 0
+sdo_active                  0x000[7]                 0           sdio, sdo_sdio
+lsb_first_addr_incr         0x000[6]                 0           msb, lsb
 soft_reset                  0x000[5]                 0
 mirror                      0x000[3:0]               0
-readback_active_registers   0x004[0]                 0
-pfd_polarity                0x010[7]                 0
-cp_current                  0x010[6:4]               7
-cp_mode                     0x010[3:2]               3
-pll_power_down              0x010[1:0]               1
+readback_active_registers   0x004[0]                 0           buffer, active
+pfd_polarity                0x010[7]                 0           pos, neg
+cp_current                  0x010[6:4]               7           0_6ma, 1_2ma, 1_8ma, 2_4ma, 3_0ma, 3_6ma, 4_2ma, 4_8ma
+cp_mode                     0x010[3:2]               3           high_imp, force_source, force_sink, normal
+pll_power_down              0x010[1:0]               1           normal=0, async=1, sync=3
 r_counter_lsb               0x011[7:0]               1
 r_counter_msb               0x012[5:0]               0
 a_counter                   0x013[5:0]               0
 b_counter_lsb               0x014[7:0]               3
 b_counter_msb               0x015[4:0]               0
-set_cp_pin_to_vcp_2         0x016[7]                 0
+set_cp_pin_to_vcp_2         0x016[7]                 0           normal, vcp_2
 reset_r_counter             0x016[6]                 0
 reset_a_and_b_counters      0x016[5]                 0
 reset_all_counters          0x016[4]                 0
-b_counter_bypass            0x016[3]                 0
-prescaler_p                 0x016[2:0]               6
+b_counter_bypass            0x016[3]                 0           normal, div1
+prescaler_p                 0x016[2:0]               6           div1, div2, div2_3, div4_5, div8_9, div16_17, div32_33, div3
 status_pin_control          0x017[7:2]               0
-antibacklash_pulse_width    0x017[1:0]               0
+antibacklash_pulse_width    0x017[1:0]               0           2_9ns, 1_3ns, 6_0ns, 2_9ns
 enb_cmos_ref_input_dc_off   0x018[7]                 0
-lock_detect_counter         0x018[6:5]               0
-digital_lock_detect_window  0x018[4]                 0
-disable_digital_lock_detect 0x018[3]                 0
-vco_calibration_divider     0x018[2:1]               3
+lock_detect_counter         0x018[6:5]               0           5cyc, 16cyc, 64cyc, 255cyc
+digital_lock_detect_window  0x018[4]                 0           high_range, low_range
+disable_digital_lock_detect 0x018[3]                 0           normal, disabled
+vco_calibration_divider     0x018[2:1]               3           div2, div4, div8, div16
 vco_calibration_now         0x018[0]                 0
-r_a_b_counters_sync_pin_rst 0x019[7:6]               0
+r_a_b_counters_sync_pin_rst 0x019[7:6]               0           nothing, async, sync
 r_path_delay                0x019[5:3]               0
 n_path_delay                0x019[2:0]               0
 enable_status_pin_divider   0x01A[7]                 0
-ref_freq_monitor_threshold  0x01A[6]                 0
+ref_freq_monitor_threshold  0x01A[6]                 0           1_02mhz, 6khz
 ld_pin_control              0x01A[5:0]               0
 enable_vco_freq_monitor     0x01B[7]                 0
 enable_ref2_freq_monitor    0x01B[6]                 0
 enable_ref1_freq_monitor    0x01B[5]                 0
 refmon_pin_control          0x01B[4:0]               0
 disable_switchover_deglitch 0x01C[7]                 0
-select_ref2                 0x01C[6]                 0
-use_ref_sel_pin             0x01C[5]                 0
-enb_auto_ref_switchover     0x01C[4]                 0
-stay_on_ref2                0x01C[3]                 0
+select_ref2                 0x01C[6]                 0           ref1, ref2
+use_ref_sel_pin             0x01C[5]                 0           register, ref_sel
+enb_auto_ref_switchover     0x01C[4]                 0           manual, auto
+stay_on_ref2                0x01C[3]                 0           return_ref1, stay_ref2
 enable_ref2                 0x01C[2]                 0
 enable_ref1                 0x01C[1]                 0
 enable_differential_ref     0x01C[0]                 0
@@ -80,19 +80,19 @@ enable_zero_delay           0x01E[1]                 0
 ########################################################################
 #for $i in range(12)
 #set $addr = ($i + 0x0F0)
-out$(i)_format              $(addr)[7]             0
-out$(i)_cmos_configuration  $(addr)[6:5]           3
-out$(i)_polarity            $(addr)[4:3]           0
-out$(i)_lvds_diff_voltage   $(addr)[2:1]           1
+out$(i)_format              $(addr)[7]             0             lvds, cmos
+out$(i)_cmos_configuration  $(addr)[6:5]           3             off, a_on, b_on, ab_on
+out$(i)_polarity            $(addr)[4:3]           0             lvds_a_non_b_inv=0, lvds_a_inv_b_non=1, cmos_ab_non=0, cmos_ab_inv=1, cmos_a_non_b_inv=2, cmos_a_inv_b_non=3
+out$(i)_lvds_diff_voltage   $(addr)[2:1]           1             1_75ma, 3_5ma, 5_25ma, 7_0ma
 out$(i)_lvds_power_down     $(addr)[0]             0
 #end for
 ########################################################################
 #for $i in reversed(range(8))
-csdld_en_out_$i             0x0FC[$i]                0
+csdld_en_out_$i             0x0FC[$i]                0           ignore, async
 #end for
 ########################################################################
 #for $i in reversed(range(4))
-csdld_en_out_$(8 + $i)      0x0FD[$i]                0
+csdld_en_out_$(8 + $i)      0x0FD[$i]                0           ignore, async
 #end for
 ########################################################################
 #set $default_val = 0x7
@@ -112,11 +112,11 @@ disable_divider$(i)_ddc     $(addr2)[0]           0
 #set $default_val /= 2
 #end for
 ########################################################################
-vco_divider                  0x1E0[2:0]              2
+vco_divider                  0x1E0[2:0]              2             div2, div3, div4, div5, div6, static, div1
 power_down_clock_input_sel   0x1E1[4]                0
 power_down_vco_clock_ifc     0x1E1[3]                0
 power_down_vco_and_clock     0x1E1[2]                0
-select_vco_or_clock          0x1E1[1]                0
+select_vco_or_clock          0x1E1[1]                0             external, vco
 bypass_vco_divider           0x1E1[0]                0
 disable_power_on_sync        0x230[3]                0
 power_down_sync              0x230[2]                0
@@ -143,6 +143,12 @@ boost::uint8_t get_reg(boost::uint16_t addr){
         break;
     #end for
     }
+    if (addr == 0){ //mirror 4 bits in register 0
+        reg |= ((reg >> 7) & 0x1) << 0;
+        reg |= ((reg >> 6) & 0x1) << 1;
+        reg |= ((reg >> 5) & 0x1) << 2;
+        reg |= ((reg >> 4) & 0x1) << 3;
+    }
     return reg;
 }