wb_zbt16_b is a quick hack just to be able to safely check the sram. it is not speed-optimized

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9633 221aa14e-8319-0410-a670-987f0aec2ac5

2 files changed, 68 insertions, 5 deletions

diff --git a/extram/extram_wb.v b/extram/extram_wb.v
index 8142047d7..c8428783a 100644
--- a/extram/extram_wb.v
+++ b/extram/extram_wb.v
@@ -21,7 +21,7 @@ module extram_wb
    wire     write_acc = stb_i & cyc_i & we_i;
    wire     acc = stb_i & cyc_i;
 
-   assign   RAM_CLK = wb_clk;   // 50 MHz for now, eventually should be 200 MHz
+   assign   RAM_CLK = ~wb_clk;   // 50 MHz for now, eventually should be 200 MHz
    assign   RAM_LDn = 0;        // No burst for now
    assign   RAM_CENn = 0;       // Use CE1n as our main CE
 
@@ -63,12 +63,12 @@ module extram_wb
      else
        case(RAM_state)
 	 RAM_idle :
-	   if(read_acc)
+	   if(read_acc & ~ack_o)
 	     begin
 		RAM_state <= RAM_read_1;
 		myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 1; RAM_A0_reg <= 0;
 	     end
-	   else if(write_acc)
+	   else if(write_acc & ~ack_o)
 	     begin
 		RAM_state <= RAM_write_1;
 		myOE <= 0; RAM_OE <= 0; RAM_WE <= 1; RAM_EN <= 1; RAM_A0_reg <= 0;
@@ -100,7 +100,7 @@ module extram_wb
 	 RAM_write_1 : 
 	   begin
 	      RAM_state <= RAM_write_2;
-	      myOE <= 0; RAM_OE <= 0; RAM_WE <= 1; RAM_EN <= 1; RAM_A0_reg <= 1;
+	      myOE <= 1; RAM_OE <= 0; RAM_WE <= 1; RAM_EN <= 1; RAM_A0_reg <= 1;
 	   end
 	 RAM_write_2 : 
 	   begin
@@ -126,7 +126,7 @@ module extram_wb
    assign     RAM_CE1n = ~RAM_EN;    // Active low     (RAM_state != RAM_idle);
    
    assign     RAM_D[17:16] = 2'bzz;
-   assign     RAM_D[15:0] = myOE ? ((RAM_state==RAM_write_3)?ram_out[15:0]:ram_out[31:16]) 
+   assign     RAM_D[15:0] = myOE ? ((RAM_state==RAM_write_2)?ram_out[15:0]:ram_out[31:16]) 
 	      : 16'bzzzz_zzzz_zzzz_zzzz;
 
    always @(posedge wb_clk)
diff --git a/extram/wb_zbt16_b.v b/extram/wb_zbt16_b.v
new file mode 100644
index 000000000..d93e21c99
--- /dev/null
+++ b/extram/wb_zbt16_b.v
@@ -0,0 +1,63 @@
+
+module wb_zbt16_b
+  (input               clk,
+   input               rst,
+   // Wishbone bus A, highest priority, with prefetch
+   input      [19:0]   wb_adr_i,
+   input      [15:0]   wb_dat_i,
+   output reg [15:0]   wb_dat_o,
+   input      [ 1:0]   wb_sel_i,
+   input               wb_cyc_i,
+   input               wb_stb_i,
+   output reg          wb_ack_o,
+   input               wb_we_i,
+   // Memory connection
+   output              sram_clk,
+   output     [18:0]   sram_a,
+   inout      [15:0]   sram_d,
+   output              sram_we,
+   output     [ 1:0]   sram_bw,
+   output              sram_adv,
+   output              sram_ce,
+   output              sram_oe,
+   output              sram_mode,
+   output              sram_zz
+   );
+
+   assign 	       sram_clk = ~clk;
+   //assign 	       sram_oe = 1'b0;
+   assign 	       sram_ce = 1'b0;
+   assign 	       sram_adv = 1'b0;
+   assign 	       sram_mode = 1'b0;
+   assign 	       sram_zz = 1'b0;
+   assign 	       sram_bw = 2'b0;
+   
+   // need to drive wb_dat_o, wb_ack_o,
+   // sram_a, sram_d, sram_we
+   wire 	       myOE;
+   assign 	       sram_d = myOE ? wb_dat_i : 16'bzzzz;
+   assign 	       sram_a = wb_adr_i[19:1];
+
+   reg 		       read_d1, read_d2, read_d3, write_d1, write_d2, write_d3;
+   wire 	       acc = wb_cyc_i & wb_stb_i;
+   wire 	       read_acc = wb_cyc_i & wb_stb_i & ~wb_we_i & ~read_d1 & ~read_d2 & ~read_d3;
+   wire 	       write_acc = wb_cyc_i & wb_stb_i & wb_we_i & ~write_d1 & ~write_d2 & ~write_d3;
+
+   assign 	       sram_we = ~write_acc;
+   assign 	       sram_oe = ~(read_d2 | read_d3);
+   assign 	       myOE = write_d1 | write_d2;
+   wire 	       latch_now = read_d2;
+
+   always @(posedge clk)
+     if(latch_now)
+       wb_dat_o <= sram_d;
+
+   always @(posedge clk) wb_ack_o <= read_d2 | write_d2;
+   always @(posedge clk) read_d1 <= read_acc;
+   always @(posedge clk) read_d2 <= read_d1;
+   always @(posedge clk) read_d3 <= read_d2;
+   always @(posedge clk) write_d1 <= write_acc;
+   always @(posedge clk) write_d2 <= write_d1;
+   always @(posedge clk) write_d3 <= write_d2;
+endmodule // wb_zbt16_b
+