Merged features/inband-usb -r6431:8293 into trunk.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8295 221aa14e-8319-0410-a670-987f0aec2ac5

23 files changed, 1021 insertions, 1325 deletions

diff --git a/Makefile.extra b/Makefile.extra
index 8154e2eb0..56df23c98 100644
--- a/Makefile.extra
+++ b/Makefile.extra
@@ -4,14 +4,11 @@ EXTRA_DIST =                                         \
 	inband_lib/channel_demux.v                   \
 	inband_lib/channel_ram.v                     \
 	inband_lib/cmd_reader.v                      \
-	inband_lib/data_packet_fifo.v                \
 	inband_lib/packet_builder.v                  \
 	inband_lib/register_io.v                     \
 	inband_lib/rx_buffer_inband.v                \
 	inband_lib/tx_buffer_inband.v                \
 	inband_lib/tx_packer.v                       \
-	inband_lib/usb_fifo_reader.v                 \
-	inband_lib/usb_fifo_writer.v                 \
 	inband_lib/usb_packet_fifo.v                 \
 	megacells/accum32.bsf                        \
 	megacells/accum32.cmp                        \
diff --git a/inband_lib/chan_fifo_reader.v b/inband_lib/chan_fifo_reader.v
index a6edf2c60..69da9ec5a 100755
--- a/inband_lib/chan_fifo_reader.v
+++ b/inband_lib/chan_fifo_reader.v
@@ -1,106 +1,102 @@
 module chan_fifo_reader 
-  ( reset, tx_clock, tx_strobe, adc_time, samples_format,
+   (reset, tx_clock, tx_strobe, timestamp_clock, samples_format,
     fifodata, pkt_waiting, rdreq, skip, tx_q, tx_i,
     underrun, tx_empty, debug, rssi, threshhold, rssi_wait) ;
 
-    input   wire                     reset ;
-    input   wire                     tx_clock ;
-    input   wire                     tx_strobe ; //signal to output tx_i and tx_q
-    input   wire              [31:0] adc_time ; //current time
-    input   wire               [3:0] samples_format ;// not useful at this point
-    input   wire              [31:0] fifodata ; //the data input
-    input   wire                     pkt_waiting ; //signal the next packet is ready
-    output  reg                      rdreq ; //actually an ack to the current fifodata
-    output  reg                      skip ; //finish reading current packet
-    output  reg               [15:0] tx_q ; //top 16 bit output of fifodata
-    output  reg               [15:0] tx_i ; //bottom 16 bit output of fifodata
-    output  reg                      underrun ; 
-    output  reg                      tx_empty ; //cause 0 to be the output
-    input 	wire			  [31:0] rssi;
-    input	wire			  [31:0] threshhold;
-	input	wire			  [31:0] rssi_wait;
+   input   wire                     reset ;
+   input   wire                     tx_clock ;
+   input   wire                     tx_strobe ; //signal to output tx_i and tx_q
+   input   wire              [31:0] timestamp_clock ; //current time
+   input   wire               [3:0] samples_format ;// not useful at this point
+   input   wire              [31:0] fifodata ; //the data input
+   input   wire                     pkt_waiting ; //signal the next packet is ready
+   output  reg                      rdreq ; //actually an ack to the current fifodata
+   output  reg                      skip ; //finish reading current packet
+   output  reg               [15:0] tx_q ; //top 16 bit output of fifodata
+   output  reg               [15:0] tx_i ; //bottom 16 bit output of fifodata
+   output  reg                      underrun ; 
+   output  reg                      tx_empty ; //cause 0 to be the output
+   input   wire		     [31:0] rssi;
+   input   wire		     [31:0] threshhold;
+   input   wire		     [31:0] rssi_wait;
 
-	output wire [14:0] debug;
-	assign debug = {reader_state, trash, skip, timestamp[4:0], adc_time[4:0]};
-    // Should not be needed if adc clock rate < tx clock rate
-    // Used only to debug
-    `define JITTER                   5
-    
-    //Samples format
-    // 16 bits interleaved complex samples
-    `define QI16                     4'b0
+   output wire [14:0] debug;
+   assign debug = {7'd0, rdreq, skip, reader_state, pkt_waiting, tx_strobe, tx_clock};
+   
+   //Samples format
+   // 16 bits interleaved complex samples
+   `define QI16                     4'b0
     
-    // States
-    parameter IDLE           =     3'd0;    
-	parameter HEADER         =     3'd1;
-    parameter TIMESTAMP      =     3'd2;
-    parameter WAIT           =     3'd3;
-    parameter WAITSTROBE     =     3'd4;
-    parameter SEND           =     3'd5;
+   // States
+   parameter IDLE           =     3'd0;    
+   parameter HEADER         =     3'd1;
+   parameter TIMESTAMP      =     3'd2;
+   parameter WAIT           =     3'd3;
+   parameter WAITSTROBE     =     3'd4;
+   parameter SEND           =     3'd5;
 
-    // Header format
-    `define PAYLOAD                  8:2
-    `define ENDOFBURST               27
-    `define STARTOFBURST            28
-    `define RSSI_FLAG				 26
+   // Header format
+   `define PAYLOAD                  8:2
+   `define ENDOFBURST               27
+   `define STARTOFBURST             28
+   `define RSSI_FLAG                26
 	
 
-    /* State registers */
-    reg                        [2:0] reader_state;
-	/* Local registers */  
-    reg                        [6:0] payload_len;
-    reg                        [6:0] read_len;
-    reg                       [31:0] timestamp;
-    reg                              burst;
-	reg								 trash;
-	reg								 rssi_flag;
-	reg						  [31:0] time_wait;
+   /* State registers */
+   reg                        [2:0] reader_state;
+   /* Local registers */  
+   reg                        [6:0] payload_len;
+   reg                        [6:0] read_len;
+   reg                       [31:0] timestamp;
+   reg                              burst;
+   reg                              trash;
+   reg                              rssi_flag;
+   reg			     [31:0] time_wait;
    
-    always @(posedge tx_clock)
-    begin
-        if (reset) 
-          begin
-            reader_state <= IDLE;
-            rdreq <= 0;
-            skip <= 0;
-            underrun <= 0;
-            burst <= 0;
-            tx_empty <= 1;
-            tx_q <= 0;
-            tx_i <= 0;
-			trash <= 0;
-			rssi_flag <= 0;
-			time_wait <= 0;
+   always @(posedge tx_clock)
+     begin
+       if (reset) 
+         begin
+           reader_state <= IDLE;
+           rdreq <= 0;
+           skip <= 0;
+           underrun <= 0;
+           burst <= 0;
+           tx_empty <= 1;
+           tx_q <= 0;
+           tx_i <= 0;
+           trash <= 0;
+           rssi_flag <= 0;
+           time_wait <= 0;
          end
        else 
-		   begin
+         begin
            case (reader_state)
-               IDLE:
+             IDLE:
                begin
-				/*
-				 * reset all the variables and wait for a tx_strobe
-				 * it is assumed that the ram connected to this fifo_reader 
-				 * is a short hand fifo meaning that the header to the next packet
-				 * is already available to this fifo_reader when pkt_waiting is on
-				 */
-                   skip <=0;
-				   time_wait <= 0;
-                   if (pkt_waiting == 1)
-                     begin
-                        reader_state <= HEADER;
-                        rdreq <= 1;
-                        underrun <= 0;
-                     end
-                   if (burst == 1 && pkt_waiting == 0)
-                        underrun <= 1;
-                        
-                   if (tx_strobe == 1)
-                       tx_empty <= 1 ;
+               /*
+		* reset all the variables and wait for a tx_strobe
+		* it is assumed that the ram connected to this fifo_reader 
+		* is a short hand fifo meaning that the header to the next packet
+		* is already available to this fifo_reader when pkt_waiting is on
+		*/
+                 skip <=0;
+                 time_wait <= 0;
+                 if (pkt_waiting == 1)
+                   begin
+                     reader_state <= HEADER;
+                     rdreq <= 1;
+                     underrun <= 0;
+                   end
+                 if (burst == 1 && pkt_waiting == 0)
+                     underrun <= 1;
+                 if (tx_strobe == 1)
+                     tx_empty <= 1 ;
                end
 
-				   /* Process header */
+               /* Process header */
                HEADER:
-               begin
+                 begin
                    if (tx_strobe == 1)
                        tx_empty <= 1 ;
                    
@@ -114,68 +110,64 @@ module chan_fifo_reader
                    else if (fifodata[`ENDOFBURST] == 1)
                        burst <= 0;
 
-					if (trash == 1 && fifodata[`STARTOFBURST] == 0)
-					begin
-						skip <= 1;
-						reader_state <= IDLE;
-						rdreq <= 0;
-					end 
-                    else
-					begin   
-                   		payload_len <= fifodata[`PAYLOAD] ;
-                   		read_len <= 0;
-                        rdreq <= 1;
-						reader_state <= TIMESTAMP;
-					end
-               end
+                   if (trash == 1 && fifodata[`STARTOFBURST] == 0)
+                     begin
+                       skip <= 1;
+                       reader_state <= IDLE;
+                       rdreq <= 0;
+                     end 
+                   else
+                     begin   
+                       payload_len <= fifodata[`PAYLOAD] ;
+                       read_len <= 0;
+                       rdreq <= 1;
+                       reader_state <= TIMESTAMP;
+                     end
+                 end
 
                TIMESTAMP: 
-               begin
+                 begin
                    timestamp <= fifodata;
                    reader_state <= WAIT;
                    if (tx_strobe == 1)
                        tx_empty <= 1 ;
                    rdreq <= 0;
-               end
+                 end
 				
-				   // Decide if we wait, send or discard samples
+               // Decide if we wait, send or discard samples
                WAIT: 
-               begin
+                 begin
                    if (tx_strobe == 1)
                        tx_empty <= 1 ;
                     
                    time_wait <= time_wait + 32'd1;
-				   // Outdated
-                   if ((timestamp < adc_time) ||
-							(time_wait >= rssi_wait && rssi_wait != 0 && rssi_flag))
+                   // Outdated
+                   if ((timestamp < timestamp_clock) ||
+                      (time_wait >= rssi_wait && rssi_wait != 0 && rssi_flag))
                      begin
-						trash <= 1;
-                        reader_state <= IDLE;
-                        skip <= 1;
+                       trash <= 1;
+                       reader_state <= IDLE;
+                       skip <= 1;
                      end  
                    // Let's send it					
-                   else if ((timestamp <= adc_time + `JITTER 
-                             && timestamp > adc_time)
+                   else if (timestamp == timestamp_clock 
                              || timestamp == 32'hFFFFFFFF)
-					begin
-						if (rssi <= threshhold || rssi_flag == 0)
-						  begin
-						    trash <= 0;
-                            reader_state <= WAITSTROBE; 
-                          end
-						else
-						    reader_state <= WAIT;
-					end
-				   else
-						reader_state <= WAIT;
-                   // Wait a little bit more
-                   //else if (timestamp > adc_time + `JITTER)
-                   //    reader_state <= WAIT;
-               end
+                     begin
+                       if (rssi <= threshhold || rssi_flag == 0)
+                         begin
+                           trash <= 0;
+                           reader_state <= WAITSTROBE; 
+                         end
+                       else
+                         reader_state <= WAIT;
+                     end
+                   else
+                       reader_state <= WAIT;
+                 end
                  
                // Wait for the transmit chain to be ready
                WAITSTROBE:
-               begin
+                 begin
                    // If end of payload...
                    if (read_len == payload_len)
                      begin
@@ -189,11 +181,11 @@ module chan_fifo_reader
                        reader_state <= SEND;
                        rdreq <= 1;
                      end
-               end
+                 end
                
-			   // Send the samples to the tx_chain
+               // Send the samples to the tx_chain
                SEND:
-               begin
+                 begin
                    reader_state <= WAITSTROBE; 
                    read_len <= read_len + 7'd1;
                    tx_empty <= 0;
@@ -213,13 +205,13 @@ module chan_fifo_reader
                             tx_q <= fifodata[31:16];
                         end 
                    endcase
-               end
+                 end
                
                default:
-               begin
-					//error handling
+                 begin
+                   //error handling
                    reader_state <= IDLE;
-               end
+                 end
            endcase
        end
    end
diff --git a/inband_lib/channel_demux.v b/inband_lib/channel_demux.v
index d46be9397..cca5cdb65 100644
--- a/inband_lib/channel_demux.v
+++ b/inband_lib/channel_demux.v
@@ -1,24 +1,24 @@
 module channel_demux
- #(parameter NUM_CHAN = 2, parameter CHAN_WIDTH = 2) (     //usb Side
-			input [31:0]usbdata_final,
-			input WR_final, 
-			
-			// TX Side
-			input reset,
-			input txclk,
-			output reg [CHAN_WIDTH:0] WR_channel,
-			output reg [31:0] ram_data,
-			output reg [CHAN_WIDTH:0] WR_done_channel );
-/* Parse header and forward to ram */
-	reg [2:0]reader_state;
-	reg [4:0]channel ;
-	reg [6:0]read_length ;
+ #(parameter NUM_CHAN = 2) (     //usb Side
+   input [31:0]usbdata_final,
+   input WR_final, 
+   // TX Side
+   input reset,
+   input txclk,
+   output reg [NUM_CHAN:0] WR_channel,
+   output reg [31:0] ram_data,
+   output reg [NUM_CHAN:0] WR_done_channel );
+   /* Parse header and forward to ram */
+	
+    reg [2:0]reader_state;
+    reg [4:0]channel ;
+    reg [6:0]read_length ;
 	
 	 // States
-    parameter IDLE		=	3'd0;
-    parameter HEADER	=	3'd1;
-    parameter WAIT		=	3'd2;
-    parameter FORWARD	=	3'd3;
+    parameter IDLE      =    3'd0;
+    parameter HEADER    =    3'd1;
+    parameter WAIT      =    3'd2;
+    parameter FORWARD   =    3'd3;
 	
 	`define CHANNEL 20:16
 	`define PKT_SIZE 127
@@ -27,7 +27,7 @@ module channel_demux
 							NUM_CHAN : (usbdata_final[`CHANNEL]);
 	
 	always @(posedge txclk)
-	begin
+	  begin
 	    if (reset)
 	      begin
 	       reader_state <= IDLE;
diff --git a/inband_lib/channel_ram.v b/inband_lib/channel_ram.v
index 60450f02d..9621246c5 100755
--- a/inband_lib/channel_ram.v
+++ b/inband_lib/channel_ram.v
@@ -1,114 +1,107 @@
 module channel_ram 
-	( // System
-	input txclk,
-	input reset,
+   ( // System
+     input txclk, input reset,
+     // USB side
+     input [31:0] datain, input WR, input WR_done, output have_space,
+     // Reader side 
+     output [31:0] dataout, input RD, input RD_done, output packet_waiting);
 	
-	// USB side
-	input [31:0] datain, 
-	input WR, 
-	input WR_done,
-	output have_space,
-
-	// Reader side
-	output [31:0] dataout,
-	input RD,
-	input RD_done,
-	output packet_waiting);
-	
-	reg [6:0] wr_addr, rd_addr;
-	reg [1:0] which_ram_wr, which_ram_rd;
-	reg [2:0] nb_packets;
+   reg [6:0] wr_addr, rd_addr;
+   reg [1:0] which_ram_wr, which_ram_rd;
+   reg [2:0] nb_packets;
 	
-	reg [31:0] ram0 [0:127];
-	reg [31:0] ram1 [0:127];
-	reg [31:0] ram2 [0:127];
-	reg [31:0] ram3 [0:127];
+   reg [31:0] ram0 [0:127];
+   reg [31:0] ram1 [0:127];
+   reg [31:0] ram2 [0:127];
+   reg [31:0] ram3 [0:127];
 	
-	reg [31:0] dataout0;
-	reg [31:0] dataout1;
-	reg [31:0] dataout2;
-	reg [31:0] dataout3;
+   reg [31:0] dataout0;
+   reg [31:0] dataout1;
+   reg [31:0] dataout2;
+   reg [31:0] dataout3;
 	
-	wire wr_done_int;
-	wire rd_done_int;
-   	wire [6:0] rd_addr_final;
-	wire [1:0] which_ram_rd_final;
+   wire wr_done_int;
+   wire rd_done_int;
+   wire [6:0] rd_addr_final;
+   wire [1:0] which_ram_rd_final;
 	
-	// USB side
-	always @(posedge txclk)
-		if(WR & (which_ram_wr == 2'd0)) ram0[wr_addr] <= datain;
+   // USB side
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd0)) ram0[wr_addr] <= datain;
 			
-	always @(posedge txclk)
-		if(WR & (which_ram_wr == 2'd1)) ram1[wr_addr] <= datain;
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd1)) ram1[wr_addr] <= datain;
 
-	always @(posedge txclk)
-		if(WR & (which_ram_wr == 2'd2)) ram2[wr_addr] <= datain;
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd2)) ram2[wr_addr] <= datain;
 
-	always @(posedge txclk)
-		if(WR & (which_ram_wr == 2'd3)) ram3[wr_addr] <= datain;
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd3)) ram3[wr_addr] <= datain;
 
    assign wr_done_int = ((WR && (wr_addr == 7'd127)) || WR_done);
    
-	always @(posedge txclk)
-		if(reset)
-			wr_addr <= 0;
-		else if (WR_done)
-			wr_addr <= 0;
-		else if (WR) 
-			wr_addr <= wr_addr + 7'd1;
+   always @(posedge txclk)
+       if(reset)
+           wr_addr <= 0;
+       else if (WR_done)
+           wr_addr <= 0;
+       else if (WR) 
+           wr_addr <= wr_addr + 7'd1;
 		
-	always @(posedge txclk)
-		if(reset)
-			which_ram_wr <= 0;
-		else if (wr_done_int) 
-			which_ram_wr <= which_ram_wr + 2'd1;
+   always @(posedge txclk)
+      if(reset)
+          which_ram_wr <= 0;
+      else if (wr_done_int) 
+          which_ram_wr <= which_ram_wr + 2'd1;
 	
-	assign have_space = (nb_packets < 3'd3);
+   assign have_space = (nb_packets < 3'd3);
 		
-	// Reader side
-	// short hand fifo
-	// rd_addr_final is what rd_addr is going to be next clock cycle
-	// which_ram_rd_final is what which_ram_rd is going to be next clock cycle
-	always @(posedge txclk)  dataout0 <= ram0[rd_addr_final];
-	always @(posedge txclk)  dataout1 <= ram1[rd_addr_final];
-	always @(posedge txclk)  dataout2 <= ram2[rd_addr_final];
-	always @(posedge txclk)  dataout3 <= ram3[rd_addr_final];
+   // Reader side
+   // short hand fifo
+   // rd_addr_final is what rd_addr is going to be next clock cycle
+   // which_ram_rd_final is what which_ram_rd is going to be next clock cycle
+   always @(posedge txclk)  dataout0 <= ram0[rd_addr_final];
+   always @(posedge txclk)  dataout1 <= ram1[rd_addr_final];
+   always @(posedge txclk)  dataout2 <= ram2[rd_addr_final];
+   always @(posedge txclk)  dataout3 <= ram3[rd_addr_final];
 	
-	assign dataout = (which_ram_rd_final[1]) ? 
-						(which_ram_rd_final[0] ? dataout3 : dataout2) :
-						(which_ram_rd_final[0] ? dataout1 : dataout0);
+   assign dataout = (which_ram_rd_final[1]) ? 
+                    (which_ram_rd_final[0] ? dataout3 : dataout2) :
+                    (which_ram_rd_final[0] ? dataout1 : dataout0);
 
-	//RD_done is the only way to signal the end of one packet
-	assign rd_done_int = RD_done;   
+   //RD_done is the only way to signal the end of one packet
+   assign rd_done_int = RD_done;   
 
-	always @(posedge txclk)
-		if (reset)
-			rd_addr <= 0;
-		else if (RD_done)
-			rd_addr <= 0;
-		else if (RD) rd_addr <= rd_addr + 7'd1;
+   always @(posedge txclk)
+       if (reset)
+           rd_addr <= 0;
+       else if (RD_done)
+           rd_addr <= 0;
+       else if (RD) 
+           rd_addr <= rd_addr + 7'd1;
 			
-	assign rd_addr_final = (reset|RD_done) ? (6'd0) : 
-	                        ((RD)?(rd_addr+7'd1):rd_addr); 
-	always @(posedge txclk)
-	   if (reset)
-			which_ram_rd <= 0;
-		else if (rd_done_int)
-			which_ram_rd <= which_ram_rd + 2'd1;
+   assign rd_addr_final = (reset|RD_done) ? (6'd0) : 
+	                  ((RD)?(rd_addr+7'd1):rd_addr); 
+	
+   always @(posedge txclk)
+       if (reset)
+           which_ram_rd <= 0;
+       else if (rd_done_int)
+           which_ram_rd <= which_ram_rd + 2'd1;
 
-	assign which_ram_rd_final = (reset) ? (2'd0):
+   assign which_ram_rd_final = (reset) ? (2'd0):
 	                       ((rd_done_int) ? (which_ram_rd + 2'd1) : which_ram_rd);
 	                        
-	//packet_waiting is set to zero if rd_done_int is high
-	//because there is no guarantee that nb_packets will be pos.
-	//assign packet_waiting = (nb_packets != 0) & (~rd_done_int);
-	assign packet_waiting = (nb_packets > 1) | ((nb_packets == 1)&(~rd_done_int));
-	always @(posedge txclk)
-		if (reset)
-			nb_packets <= 0;
-		else if (wr_done_int & ~rd_done_int)
-			nb_packets <= nb_packets + 3'd1;
-		else if (rd_done_int & ~wr_done_int)
-			nb_packets <= nb_packets - 3'd1;
+   //packet_waiting is set to zero if rd_done_int is high
+   //because there is no guarantee that nb_packets will be pos.
+
+   assign packet_waiting = (nb_packets > 1) | ((nb_packets == 1)&(~rd_done_int));
+   always @(posedge txclk)
+       if (reset)
+           nb_packets <= 0;
+       else if (wr_done_int & ~rd_done_int)
+           nb_packets <= nb_packets + 3'd1;
+       else if (rd_done_int & ~wr_done_int)
+           nb_packets <= nb_packets - 3'd1;
 			
-endmodule
\ No newline at end of file
+endmodule
diff --git a/inband_lib/cmd_reader.v b/inband_lib/cmd_reader.v
index 7604321e4..b69ea02b7 100755
--- a/inband_lib/cmd_reader.v
+++ b/inband_lib/cmd_reader.v
@@ -1,292 +1,305 @@
-module cmd_reader(
-		//System
-		input reset,
-		input txclk,
-		input [31:0] adc_time,
-		//FX2 Side
-		output reg skip,
-		output reg rdreq,
-		input [31:0] fifodata,
-		input pkt_waiting,
-		//Rx side
-		input rx_WR_enabled,
-		output reg [15:0] rx_databus,
-		output reg rx_WR,
-		output reg rx_WR_done,
-		//register io
-		input wire [31:0] reg_data_out,
-		output reg [31:0] reg_data_in,
-		output reg [6:0] reg_addr,
-		output reg [1:0] reg_io_enable,
-		output wire [14:0] debug		
-	);
+module cmd_reader
+   (//System
+    input reset, input txclk, input [31:0] timestamp_clock,
+    //FX2 Side
+    output reg skip, output reg rdreq, 
+    input [31:0] fifodata, input pkt_waiting,
+    //Rx side
+    input rx_WR_enabled, output reg [15:0] rx_databus,
+    output reg rx_WR, output reg rx_WR_done,
+    //register io
+    input wire [31:0] reg_data_out, output reg [31:0] reg_data_in,
+    output reg [6:0] reg_addr, output reg [1:0] reg_io_enable,
+    output wire [14:0] debug, output reg stop, output reg [15:0] stop_time);
 	
-	// States
-    parameter IDLE				=	4'd0;
-	parameter HEADER			=  	4'd1;
-	parameter TIMESTAMP			=	4'd2;
-    parameter WAIT          	=   4'd3;
-	parameter TEST				=	4'd4;
-	parameter SEND				=	4'd5;
-	parameter PING				=	4'd6;
-	parameter WRITE_REG			=	4'd7;
-	parameter WRITE_REG_MASKED	= 	4'd8;
-	parameter READ_REG			=   4'd9;
-	parameter DELAY				=	4'd14;		
+   // States
+   parameter IDLE                       =   4'd0;
+   parameter HEADER                     =   4'd1;
+   parameter TIMESTAMP                  =   4'd2;
+   parameter WAIT          	        =   4'd3;
+   parameter TEST                       =   4'd4;
+   parameter SEND                       =   4'd5;
+   parameter PING                       =   4'd6;
+   parameter WRITE_REG                  =   4'd7;
+   parameter WRITE_REG_MASKED           =   4'd8;
+   parameter READ_REG                   =   4'd9;
+   parameter DELAY                      =   4'd14;		
 
-	`define OP_PING_FIXED				8'd0
-	`define OP_PING_FIXED_REPLY			8'd1
-	`define OP_WRITE_REG				8'd2
-	`define OP_WRITE_REG_MASKED			8'd3
-	`define OP_READ_REG					8'd4
-	`define OP_READ_REG_REPLY			8'd5
-	`define OP_DELAY					8'd12
+   `define OP_PING_FIXED                    8'd0
+   `define OP_PING_FIXED_REPLY              8'd1
+   `define OP_WRITE_REG	                    8'd2
+   `define OP_WRITE_REG_MASKED              8'd3
+   `define OP_READ_REG                      8'd4
+   `define OP_READ_REG_REPLY                8'd5
+   `define OP_DELAY                         8'd12
 	
-	reg [6:0] 	payload;
-	reg [6:0] 	payload_read;
-	reg [3:0] 	state;
-	reg [15:0]  high;
-	reg [15:0]	low;
-	reg			pending;
-	reg [31:0]  value0;
-	reg [31:0]	value1;
-	reg [31:0]	value2;
-	reg [1:0]   lines_in;
-	reg [1:0]	lines_out;
-	reg [1:0] 	lines_out_total;
+   reg [6:0]   payload;
+   reg [6:0]   payload_read;
+   reg [3:0]   state;
+   reg [15:0]  high;
+   reg [15:0]  low;
+   reg         pending;
+   reg [31:0]  value0;
+   reg [31:0]  value1;
+   reg [31:0]  value2;
+   reg [1:0]   lines_in;
+   reg [1:0]   lines_out;
+   reg [1:0]   lines_out_total;
 	
-	`define JITTER                      5
-	`define OP_CODE						31:24
-	`define PAYLOAD   					8:2
+   `define JITTER                           5
+   `define OP_CODE                          31:24
+   `define PAYLOAD                          8:2
 	
-	wire [7:0] ops;
-	assign ops = value0[`OP_CODE];
-	assign debug = {state[3:0], lines_out[1:0], pending, rx_WR, rx_WR_enabled, value0[2:0], ops[2:0]};
+   wire [7:0] ops;
+   assign ops = value0[`OP_CODE];
+   assign debug = {state[3:0], lines_out[1:0], pending, rx_WR, rx_WR_enabled, value0[2:0], ops[2:0]};
 	
-	always @(posedge txclk)
-		if (reset)
-		  begin
-			pending <= 0;
-		    state <= IDLE;
-			skip <= 0;
-			rdreq <= 0;
-			rx_WR <= 0;
-			reg_io_enable <= 0;
-			reg_data_in <= 0;
-			reg_addr <= 0;
-		  end
-		else case (state)
-			IDLE : begin
-				payload_read <= 0;
-				skip <= 0;
-				lines_in <= 0;
-				if (pkt_waiting)
-				  begin
-					state <= HEADER;
-					rdreq <= 1;
-				  end
-			end
+   always @(posedge txclk)
+       if (reset)
+         begin
+           pending <= 0;
+           state <= IDLE;
+           skip <= 0;
+           rdreq <= 0;
+           rx_WR <= 0;
+           reg_io_enable <= 0;
+           reg_data_in <= 0;
+           reg_addr <= 0;
+           stop <= 0;
+          end
+        else case (state)
+          IDLE : 
+            begin
+              payload_read <= 0;
+              skip <= 0;
+              lines_in <= 0;
+              if(pkt_waiting)
+                begin
+                  state <= HEADER;
+                  rdreq <= 1;
+                end
+             end
+          
+          HEADER : 
+            begin
+              payload <= fifodata[`PAYLOAD];
+              state <= TIMESTAMP;
+            end
+          
+          TIMESTAMP : 
+            begin
+              value0 <= fifodata;
+              state <= WAIT;
+              rdreq <= 0;
+            end
 			
-			HEADER : begin
-				payload <= fifodata[`PAYLOAD];
-				state <= TIMESTAMP;
-			end
+          WAIT : 
+            begin
+              // Let's send it
+              if ((value0 <= timestamp_clock + `JITTER 
+                 && value0 > timestamp_clock)
+                 || value0 == 32'hFFFFFFFF)
+                  state <= TEST;
+              // Wait a little bit more
+              else if (value0 > timestamp_clock + `JITTER)
+                  state <= WAIT; 
+              // Outdated
+              else if (value0 < timestamp_clock)
+                begin
+                  state <= IDLE;
+                  skip <= 1;
+                end
+            end
 			
-			TIMESTAMP : begin
-				value0 <= fifodata;
-				state <= WAIT;
-				rdreq <= 0;
-			end
-			
-			WAIT : begin
-  					// Let's send it
-                   if ((value0 <= adc_time + `JITTER 
-                             && value0 > adc_time)
-                             || value0 == 32'hFFFFFFFF)
-                       state <= TEST;
-                   // Wait a little bit more
-                   else if (value0 > adc_time + `JITTER)
-                       state <= WAIT; 
-                   // Outdated
-                   else if (value0 < adc_time)
-                     begin
-                        state <= IDLE;
+          TEST : 
+            begin
+              reg_io_enable <= 0;
+              rx_WR <= 0;
+              rx_WR_done <= 1;
+              stop <= 0;
+              if (payload_read == payload)
+                begin
+                  skip <= 1;
+                  state <= IDLE;
+                  rdreq <= 0;
+                end
+              else
+                begin
+                  value0 <= fifodata;
+                  lines_in <= 2'd1;
+                  rdreq <= 1;
+                  payload_read <= payload_read + 7'd1;
+                  lines_out <= 0;
+                  case (fifodata[`OP_CODE])
+                    `OP_PING_FIXED: 
+                      begin
+                        state <= PING;
+                      end
+                    `OP_WRITE_REG: 
+                      begin
+                        state <= WRITE_REG;
+                        pending <= 1;
+                      end
+                    `OP_WRITE_REG_MASKED: 
+                      begin
+                        state <= WRITE_REG_MASKED;
+                        pending <= 1;
+                      end
+                    `OP_READ_REG: 
+                      begin
+                        state <= READ_REG;
+                      end
+                    `OP_DELAY: 
+                      begin
+                        state <= DELAY;
+                      end
+                    default: 
+                      begin
+                      //error, skip this packet
                         skip <= 1;
-                     end
-			end
-			
-			TEST : begin
-				reg_io_enable <= 0;
-				rx_WR <= 0;
-				rx_WR_done <= 1;
-				if (payload_read == payload)
-					begin
-						skip <= 1;
-						state <= IDLE;
-						rdreq <= 0;
-					end
-				else
-					begin
-						value0 <= fifodata;
-						lines_in <= 2'd1;
-						rdreq <= 1;
-						payload_read <= payload_read + 7'd1;
-						lines_out <= 0;
-						case (fifodata[`OP_CODE])
-							`OP_PING_FIXED: begin
-								state <= PING;
-							end
-							`OP_WRITE_REG: begin
-								state <= WRITE_REG;
-								pending <= 1;
-							end
-							`OP_WRITE_REG_MASKED: begin
-								state <= WRITE_REG_MASKED;
-								pending <= 1;
-							end
-							`OP_READ_REG: begin
-								state <= READ_REG;
-							end
-							`OP_DELAY: begin
-								state <= DELAY;
-							end
-							default: begin
-							//error, skip this packet
-								skip <= 1;
-								state <= IDLE;
-							end
-						endcase
-					end
-			end
+                        state <= IDLE;
+                      end
+                  endcase
+                end
+              end
 			
-			SEND: begin
-				rdreq <= 0;
-				rx_WR_done <= 0;
-				if (pending)
-					begin
-						rx_WR <= 1;
-						rx_databus <= high;
-						pending <= 0;
-						if (lines_out == lines_out_total)
-							state <= TEST;
-						else case (ops)
-							`OP_READ_REG: begin
-								state <= READ_REG;
-							end
-							default: begin
-								state <= TEST;
-							end
-						endcase
-					end
-				else
-					begin
-						if (rx_WR_enabled)
-						begin
-							rx_WR <= 1;
-							rx_databus <= low;
-							pending <= 1;
-							lines_out <= lines_out + 2'd1;
-						end
-						else
-							rx_WR <= 0;
-					end
-			end
+            SEND: 
+              begin
+                rdreq <= 0;
+                rx_WR_done <= 0;
+                if (pending)
+                  begin
+                    rx_WR <= 1;
+                    rx_databus <= high;
+                    pending <= 0;
+                    if (lines_out == lines_out_total)
+                        state <= TEST;
+                    else case (ops)
+                        `OP_READ_REG: 
+                          begin
+                            state <= READ_REG;
+                          end
+                         default: 
+                           begin
+                             state <= TEST;
+                           end
+                    endcase
+                  end
+                else
+                  begin
+                    if (rx_WR_enabled)
+                      begin
+                        rx_WR <= 1;
+                        rx_databus <= low;
+                        pending <= 1;
+                        lines_out <= lines_out + 2'd1;
+                      end
+                    else
+                        rx_WR <= 0;
+                  end
+                end
 			
-			PING: begin
-				rx_WR <= 0;
-				rdreq <= 0;
-				rx_WR_done <= 0;
-				lines_out_total <= 2'd1;
-				pending <= 0;
-				state <= SEND;
-				high <= {`OP_PING_FIXED_REPLY, 8'd2};
-				low <= value0[15:0];	
-			end
+            PING: 
+              begin
+                rx_WR <= 0;
+                rdreq <= 0;
+                rx_WR_done <= 0;
+                lines_out_total <= 2'd1;
+                pending <= 0; 
+                state <= SEND;
+                high <= {`OP_PING_FIXED_REPLY, 8'd2};
+                low <= value0[15:0];	
+              end
 			
-			READ_REG: begin
-				rx_WR <= 0;
-				rx_WR_done <= 0;
-				rdreq <= 0;
-				lines_out_total <= 2'd2;
-				pending <= 0;
-				state <= SEND;
-				if (lines_out == 0)
-					begin
-						high <= {`OP_READ_REG_REPLY, 8'd6};
-						low <= value0[15:0];
-						reg_io_enable <= 2'd3;
-						reg_addr <= value0[6:0];
-					end
-				else
-					begin		
-						high <= reg_data_out[31:16];
-						low <= reg_data_out[15:0];
-					end
-			end
+            READ_REG: 
+              begin
+                rx_WR <= 0;
+                rx_WR_done <= 0;
+                rdreq <= 0;
+                lines_out_total <= 2'd2;
+                pending <= 0;
+                state <= SEND;
+                if (lines_out == 0)
+                  begin
+                    high <= {`OP_READ_REG_REPLY, 8'd6};
+                    low <= value0[15:0];
+                    reg_io_enable <= 2'd3;
+                    reg_addr <= value0[6:0];
+                  end
+                else
+                  begin		
+                    high <= reg_data_out[31:16];
+                    low <= reg_data_out[15:0];
+                  end
+             end    
 			
-			WRITE_REG: begin
-				rx_WR <= 0;
-				if (pending)
-					pending <= 0;
-				else
-					begin
-						if (lines_in == 2'd1)
-						begin
-							payload_read <= payload_read + 7'd1;
-							lines_in <= lines_in + 2'd1;
-							value1 <= fifodata;
-							rdreq <= 0;
-						end
-						else
-						begin
-							reg_io_enable <= 2'd2;
-							reg_data_in <= value1;
-							reg_addr <= value0[6:0];
-							state <= TEST;
-						end
-					end
-			end
+            WRITE_REG: 
+              begin
+                rx_WR <= 0;
+                if (pending)
+                    pending <= 0;
+                else
+                  begin
+                    if (lines_in == 2'd1)
+                      begin
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value1 <= fifodata;
+                        rdreq <= 0;
+                      end
+                    else
+                      begin
+                        reg_io_enable <= 2'd2;
+                        reg_data_in <= value1;
+                        reg_addr <= value0[6:0];
+                        state <= TEST;
+                      end
+                  end
+              end
 			
-			WRITE_REG_MASKED: begin
-				rx_WR <= 0;
-				if (pending)
-					pending <= 0;
-				else
-					begin
-						if (lines_in == 2'd1)
-						begin
-							rdreq <= 1;
-							payload_read <= payload_read + 7'd1;
-							lines_in <= lines_in + 2'd1;
-							value1 <= fifodata;
-						end
-						else if (lines_in == 2'd2)
-						begin
-							rdreq <= 0;
-							payload_read <= payload_read + 7'd1;
-							lines_in <= lines_in + 2'd1;
-							value2 <= fifodata;
-						end
-						else
-						begin
-							reg_io_enable <= 2'd2;
-							reg_data_in <= (value1 & value2);
-							reg_addr <= value0[6:0];
-							state <= TEST;
-						end
-					end
-			end
+            WRITE_REG_MASKED: 
+              begin
+                rx_WR <= 0;
+                if (pending)
+                    pending <= 0;
+                else
+                  begin
+                    if (lines_in == 2'd1)
+                      begin
+                        rdreq <= 1;
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value1 <= fifodata;
+                      end
+                    else if (lines_in == 2'd2)
+                      begin
+                        rdreq <= 0;
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value2 <= fifodata;
+                      end
+                    else
+                      begin
+                        reg_io_enable <= 2'd2;
+                        reg_data_in <= (value1 & value2);
+                        reg_addr <= value0[6:0];
+                        state <= TEST;
+                      end
+                  end
+              end
 			
-			DELAY : begin
-				rdreq <= 0;
-				value1 <= value1 + 32'd1;
-				if (value0[15:0] == value1[15:0])
-					state <= TEST;
-			end
+            DELAY : 
+              begin
+                rdreq <= 0;
+                stop <= 1;
+                stop_time <= value0[15:0];
+                state <= TEST;
+              end
 			
-			default : begin
-				//error state handling
-				state <= IDLE;
-			end
-		endcase
-endmodule
\ No newline at end of file
+            default : 
+              begin
+                //error state handling
+                state <= IDLE;
+              end
+        endcase
+endmodule
diff --git a/inband_lib/data_packet_fifo.v b/inband_lib/data_packet_fifo.v
deleted file mode 100755
index a9bcbdae7..000000000
--- a/inband_lib/data_packet_fifo.v
+++ /dev/null
@@ -1,118 +0,0 @@
-module data_packet_fifo 
-  ( input       reset,
-    input       clock,
-    input       [31:0]ram_data_in,
-    input       write_enable,
-    output  reg have_space,
-    output  reg [31:0]ram_data_out,
-    output  reg pkt_waiting,
-	output	reg	isfull,
-	output	reg [1:0]usb_ram_packet_out,
-	output	reg [1:0]usb_ram_packet_in,
-    input       read_enable,
-    input       pkt_complete,
-    input       skip_packet) ;
-
-    /* Some parameters for usage later on */
-    parameter DATA_WIDTH = 32 ;
-    parameter PKT_DEPTH = 128 ;
-    parameter NUM_PACKETS = 4 ;
-
-    /* Create the RAM here */
-    reg [DATA_WIDTH-1:0] usb_ram [PKT_DEPTH*NUM_PACKETS-1:0] ;
-
-    /* Create the address signals */
-    reg [6:0] usb_ram_offset_out ;
-    //reg [1:0] usb_ram_packet_out ;
-    reg [6:0] usb_ram_offset_in ;
-    //reg [1:0] usb_ram_packet_in ;
-
-    wire [6-2+NUM_PACKETS:0] usb_ram_aout ;
-    wire [6-2+NUM_PACKETS:0] usb_ram_ain ;
-    //reg isfull;
-
-    assign usb_ram_aout = {usb_ram_packet_out, usb_ram_offset_out} ;
-    assign usb_ram_ain = {usb_ram_packet_in, usb_ram_offset_in} ;
-    
-    // Check if there is one full packet to process
-    always @(usb_ram_ain, usb_ram_aout, isfull)
-    begin
-        if (usb_ram_ain == usb_ram_aout)
-            pkt_waiting <= isfull ;
-        else if (usb_ram_ain > usb_ram_aout)
-            pkt_waiting <= (usb_ram_ain - usb_ram_aout) >= PKT_DEPTH;
-        else
-            pkt_waiting <= (usb_ram_ain + 10'b1000000000 - usb_ram_aout) >= PKT_DEPTH;
-    end
- 
-    // Check if there is room
-    always @(usb_ram_ain, usb_ram_aout, isfull)
-    begin
-        if (usb_ram_ain == usb_ram_aout)
-            have_space <= ~isfull;   
-        else if (usb_ram_ain > usb_ram_aout)
-            have_space <= ((usb_ram_ain - usb_ram_aout) <= PKT_DEPTH * (NUM_PACKETS - 1))? 1'b1 : 1'b0;
-        else
-            have_space <= (usb_ram_aout - usb_ram_ain) >= PKT_DEPTH;
-    end
-
-
-
-    /* RAM Writing/Reading process */
-    always @(posedge clock)
-    begin
-        if( write_enable ) 
-          begin
-            usb_ram[usb_ram_ain] <= ram_data_in ;
-          end
-		ram_data_out <= usb_ram[usb_ram_aout] ;
-    end
-
-    /* RAM Write/Read Address process */
-    always @(posedge clock)
-    begin
-        if( reset ) 
-          begin
-            usb_ram_packet_out <= 0 ;
-            usb_ram_offset_out <= 0 ;
-			usb_ram_offset_in <= 0 ;
-            usb_ram_packet_in <= 0 ;
-            isfull <= 0;
-          end
-        else
-		  begin
-            if( skip_packet )
-              begin
-                usb_ram_packet_out <= usb_ram_packet_out + 1 ;
-                usb_ram_offset_out <= 0 ;
-                isfull <= 0;
-              end
-            else if(read_enable) 
-			  begin
-                if( usb_ram_offset_out == 7'b1111111 )
-                  begin
-                    isfull <= 0 ;
-                    usb_ram_offset_out <= 0 ;
-                    usb_ram_packet_out <= usb_ram_packet_out + 1 ;
-                  end
-                else
-                    usb_ram_offset_out <= usb_ram_offset_out + 1 ;  
-              end
-			if( pkt_complete )
-              begin
-                usb_ram_packet_in <= usb_ram_packet_in + 1 ;
-                usb_ram_offset_in <= 0 ;
-                if ((usb_ram_packet_in + 2'b1) == usb_ram_packet_out)
-                    isfull <= 1 ;
-              end
-            else if( write_enable ) 
-              begin
-                if (usb_ram_offset_in == 7'b1111111)
-                    usb_ram_offset_in <= 7'b1111111 ;    
-                else
-                    usb_ram_offset_in <= usb_ram_offset_in + 1 ;
-              end
-		  end
-    end
-
-endmodule
diff --git a/inband_lib/packet_builder.v b/inband_lib/packet_builder.v
index fbf0a656e..2c9122394 100755
--- a/inband_lib/packet_builder.v
+++ b/inband_lib/packet_builder.v
@@ -1,8 +1,8 @@
-module packet_builder #(parameter NUM_CHAN = 1)(
+module packet_builder #(parameter NUM_CHAN = 2)(
     // System
     input rxclk,
     input reset,
-	 input [31:0] adctime,
+	 input [31:0] timestamp_clock,
 	 input [3:0] channels,
     // ADC side
     input [15:0]chan_fifodata,
@@ -14,17 +14,17 @@ module packet_builder #(parameter NUM_CHAN = 1)(
     output reg WR,
     output reg [15:0]fifodata,
     input have_space, 
-	input wire [31:0]rssi_0, input wire [31:0]rssi_1, input wire [31:0]rssi_2,
-	input wire [31:0]rssi_3, output wire [7:0] debugbus,
-	input [NUM_CHAN:0] overrun, input [NUM_CHAN:0] underrun);
+    input wire [31:0]rssi_0, input wire [31:0]rssi_1, input wire [31:0]rssi_2,
+    input wire [31:0]rssi_3, output wire [7:0] debugbus,
+    input [NUM_CHAN:0] underrun);
     
     
     // States
     `define IDLE                     3'd0
     `define HEADER1                  3'd1
-	`define HEADER2					 3'd2
+    `define HEADER2                  3'd2
     `define TIMESTAMP                3'd3
- 	`define FORWARD					 3'd4
+    `define FORWARD                  3'd4
 	
     `define MAXPAYLOAD 504
     
@@ -39,51 +39,67 @@ module packet_builder #(parameter NUM_CHAN = 1)(
     `define UNDERRUN 14
     `define OVERRUN 15
     
+    reg [NUM_CHAN:0] overrun;
     reg [2:0] state;
     reg [8:0] read_length;
     reg [8:0] payload_len;
-    reg tstamp_complete;
+    reg timestamp_complete;
     reg [3:0] check_next;
-	wire [8:0] chan_used;
+	
     wire [31:0] true_rssi;
-	wire [4:0] true_channel;
+    wire [4:0] true_channel;
+    wire ready_to_send;
+
+    assign debugbus = {chan_empty[0], rd_select[0], have_space, 
+                       (chan_usedw >= 10'd504), (chan_usedw ==0),  
+                       ready_to_send, state[1:0]};
 
-	assign debugbus = {state, chan_empty[0], underrun[0], check_next[0],
-						have_space, rd_select[0]};
-	assign chan_used = chan_usedw[8:0];
-	assign true_rssi = (rd_select[1]) ? ((rd_select[0]) ? rssi_3:rssi_2) :
+    assign true_rssi = (rd_select[1]) ? ((rd_select[0]) ? rssi_3:rssi_2) :
 							((rd_select[0]) ? rssi_1:rssi_0);
-	assign true_channel = (check_next == 4'd0 ? 5'h1f : {1'd0, check_next - 4'd1});	
+    assign true_channel = (check_next == 4'd0 ? 5'h1f : {1'd0, check_next - 4'd1});
+    assign ready_to_send = (chan_usedw >= 10'd504) || (chan_usedw == 0) || 
+                           ((rd_select == NUM_CHAN)&&(chan_usedw > 0));
+		
     always @(posedge rxclk)
     begin
         if (reset)
           begin
+            overrun <= 0;
             WR <= 0;
             rd_select <= 0;
             chan_rdreq <= 0;
-            tstamp_complete <= 0;
+            timestamp_complete <= 0;
             check_next <= 0;
             state <= `IDLE;
           end
         else case (state)
             `IDLE: begin
-				chan_rdreq <= #1 0;
-				if (have_space)
-				  begin
-					if(~chan_empty[check_next])
-				      begin
-                		state <= #1 `HEADER1;
-						rd_select <= #1 check_next;
-				  	  end
-					check_next <= #1 (check_next == channels ? 4'd0 : check_next + 4'd1);
-				  end	
+		chan_rdreq <= #1 0;
+		//check if the channel is full
+		if(~chan_empty[check_next])
+		  begin
+                    if (have_space)
+                      begin
+                        //transmit if the usb buffer have space
+                       //check if we should send
+                       if (ready_to_send)
+                           state <= #1 `HEADER1;
+						    
+                       overrun[check_next] <= 0;
+                      end
+                  else
+                    begin
+                      state <= #1 `IDLE;
+                      overrun[check_next] <= 1;
+                    end
+                  rd_select <= #1 check_next;
+                end
+                check_next <= #1 (check_next == channels ? 4'd0 : check_next + 4'd1);
             end
             
             `HEADER1: begin
-                fifodata[`PAYLOAD_LEN] <= #1 (chan_used > 9'd252
-                                           ? 9'd252 : chan_used << 1);
-                payload_len <= #1 (chan_used > 9'd252
-                                ? 9'd252 : chan_used << 1);
+                fifodata[`PAYLOAD_LEN] <= #1 9'd504;
+                payload_len <= #1 9'd504;
                 fifodata[`TAG] <= #1 0;
                 fifodata[`MBZ] <= #1 0;
                 WR <= #1 1;
@@ -103,13 +119,13 @@ module packet_builder #(parameter NUM_CHAN = 1)(
             end
             
             `TIMESTAMP: begin
-                fifodata <= #1 (tstamp_complete ? adctime[31:16] : adctime[15:0]);
-                tstamp_complete <= #1 ~tstamp_complete;
+                fifodata <= #1 (timestamp_complete ? timestamp_clock[31:16] : timestamp_clock[15:0]);
+                timestamp_complete <= #1 ~timestamp_complete;
                 
-                if (~tstamp_complete)
+                if (~timestamp_complete)
                     chan_rdreq <= #1 1;
                 
-                state <= #1 (tstamp_complete ? `FORWARD : `TIMESTAMP);
+                state <= #1 (timestamp_complete ? `FORWARD : `TIMESTAMP);
             end
             
             `FORWARD: begin
diff --git a/inband_lib/register_io.v b/inband_lib/register_io.v
index b116b3ace..2b0cd1732 100755
--- a/inband_lib/register_io.v
+++ b/inband_lib/register_io.v
@@ -1,15 +1,38 @@
 module register_io
-	(input clk, input reset, input wire [1:0] enable, input wire [6:0] addr, 
-	 input wire [31:0] datain, output reg [31:0] dataout, output wire [15:0] debugbus,
-	 input wire [31:0] rssi_0, input wire [31:0] rssi_1,
-	 input wire [31:0] rssi_2, input wire [31:0] rssi_3, 
-	 output wire [31:0] threshhold, output wire [31:0] rssi_wait);
-	 
+	(clk, reset, enable, addr, datain, dataout, debugbus, addr_wr, data_wr, strobe_wr,
+	 rssi_0, rssi_1, rssi_2, rssi_3, threshhold, rssi_wait, reg_0, reg_1, reg_2, reg_3, 
+     debug_en, misc, txmux);   
+	
+	input clk;
+	input reset;
+	input wire [1:0] enable;
+	input wire [6:0] addr; 
+	input wire [31:0] datain;
+	output reg [31:0] dataout;
+	output wire [15:0] debugbus;
+	output reg [6:0] addr_wr;
+	output reg [31:0] data_wr;
+	output wire strobe_wr; 
+	input wire [31:0] rssi_0;
+	input wire [31:0] rssi_1;
+	input wire [31:0] rssi_2; 
+	input wire [31:0] rssi_3; 
+	output wire [31:0] threshhold;
+	output wire [31:0] rssi_wait;
+	input wire [15:0] reg_0;
+	input wire [15:0] reg_1; 
+	input wire [15:0] reg_2; 
+	input wire [15:0] reg_3;
+	input wire [3:0]  debug_en;
+	input wire [7:0]  misc;
+	input wire [31:0] txmux;
+	
 	reg strobe;
-	wire [31:0] out[7:0];
+	wire [31:0] out[2:1];
 	assign debugbus = {clk, enable, addr[2:0], datain[4:0], dataout[4:0]};
 	assign threshhold = out[1];
 	assign rssi_wait = out[2];
+	assign strobe_wr = strobe;
 	
 	always @(*)
         if (reset | ~enable[1])
@@ -22,41 +45,38 @@ module register_io
 	         if (enable[0])
 	           begin
 	             //read
-                 if (addr == 7'd9)
-                 	dataout <= rssi_0;
-                 else if (addr == 7'd10)
-                 	dataout <= rssi_1;
-                 else if (addr == 7'd11)
-                 	dataout <= rssi_2;
-                 else if (addr == 7'd12)
-                 	dataout <= rssi_3;
-                 else
-	             	dataout <= out[addr[2:0]];
-	             strobe <= 0;
-               end
+				if (addr <= 7'd52 && addr > 7'd50)
+					dataout <= out[addr-7'd50];
+				else
+					dataout <= 32'hFFFFFFFF; 	
+	            strobe <= 0;
+              end
              else
                begin
                  //write
 	             dataout <= dataout;
                  strobe <= 1;
+				 data_wr <= datain;
+				 addr_wr <= addr;
                end
           end
 
-	//register declarations
-    setting_reg #(0) setting_reg0(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[0]));
-    setting_reg #(1) setting_reg1(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[1]));
-    setting_reg #(2) setting_reg2(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[2]));
-    setting_reg #(3) setting_reg3(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[3]));
-    setting_reg #(4) setting_reg4(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[4]));
-    setting_reg #(5) setting_reg5(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[5]));
-    setting_reg #(6) setting_reg6(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[6]));
-    setting_reg #(7) setting_reg7(.clock(clk),.reset(reset),
-    .strobe(strobe),.addr(addr),.in(datain),.out(out[7]));
-endmodule	
\ No newline at end of file
+//register declarations
+    /*setting_reg #(50) setting_reg0(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[0]));*/
+    setting_reg #(51) setting_reg1(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[1]));
+    setting_reg #(52) setting_reg2(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[2]));
+    /*setting_reg #(53) setting_reg3(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[3]));
+    setting_reg #(54) setting_reg4(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[4]));
+    setting_reg #(55) setting_reg5(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[5]));
+    setting_reg #(56) setting_reg6(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[6]));
+    setting_reg #(57) setting_reg7(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[7]));*/
+
+endmodule	
diff --git a/inband_lib/rx_buffer_inband.v b/inband_lib/rx_buffer_inband.v
index 1eaecabed..cbd2d8958 100755
--- a/inband_lib/rx_buffer_inband.v
+++ b/inband_lib/rx_buffer_inband.v
@@ -1,179 +1,209 @@
-//`include "../../firmware/include/fpga_regs_common.v"
-//`include "../../firmware/include/fpga_regs_standard.v"
-module rx_buffer_inband
-  ( input usbclk,
-    input bus_reset,
-    input reset,  // DSP side reset (used here), do not reset registers
-    input reset_regs, //Only reset registers
-    output [15:0] usbdata,
-    input RD,
-    output wire have_pkt_rdy,
-    output reg rx_overrun,
-    input wire [3:0] channels,
-    input wire [15:0] ch_0,
-    input wire [15:0] ch_1,
-    input wire [15:0] ch_2,
-    input wire [15:0] ch_3,
-    input wire [15:0] ch_4,
-    input wire [15:0] ch_5,
-    input wire [15:0] ch_6,
-    input wire [15:0] ch_7,
-    input rxclk,
-    input rxstrobe,
-    input clear_status,
-    input [6:0] serial_addr, 
-    input [31:0] serial_data, 
-    input serial_strobe,
-    output wire [15:0] debugbus,
-	
-	//Connection with tx_inband
-	input rx_WR,
-	input [15:0] rx_databus,
-	input rx_WR_done,
-	output reg rx_WR_enabled,
-	//signal strength
-	input wire [31:0] rssi_0, input wire [31:0] rssi_1,
-	input wire [31:0] rssi_2, input wire [31:0] rssi_3,
-    input wire [1:0] tx_overrun, input wire [1:0] tx_underrun
-    );
-    
-    parameter NUM_CHAN = 1;
-    genvar i ;
-    
-    // FX2 Bug Fix
-    reg [8:0] read_count;
-    always @(negedge usbclk)
-        if(bus_reset)
-            read_count <= #1 9'd0;
-        else if(RD & ~read_count[8])
-            read_count <= #1 read_count + 9'd1;
-        else
-            read_count <= #1 RD ? read_count : 9'b0;
-       
-	// Time counter
-	reg [31:0] adctime;
-	always @(posedge rxclk)
-		if (reset)
-			adctime <= 0;
-		else if (rxstrobe)
-			adctime <= adctime + 1;
-     
-    // USB side fifo
-    wire [11:0] rdusedw;
-    wire [11:0] wrusedw;
-    wire [15:0] fifodata;
-    wire WR;
-    wire have_space;
-
-    fifo_4kx16_dc	rx_usb_fifo (
-	     .aclr ( reset ),
-	     .data ( fifodata ),
-	     .rdclk ( ~usbclk ),
-	     .rdreq ( RD & ~read_count[8] ),
-	     .wrclk ( rxclk ),
-	     .wrreq ( WR ),
-	     .q ( usbdata ),
-	     .rdempty (  ),
-	     .rdusedw ( rdusedw ),
-	     .wrfull (  ),
-	     .wrusedw ( wrusedw ) );
-    
-     assign have_pkt_rdy = (rdusedw >= 12'd256);
-	 assign have_space = (wrusedw < 12'd760);
-	 
-	 // Rx side fifos
-	 wire chan_rdreq;
-	 wire [15:0] chan_fifodata;
-	 wire [9:0] chan_usedw;
-	 wire [NUM_CHAN:0] chan_empty;
-	 wire [3:0] rd_select;
-	 wire [NUM_CHAN:0] rx_full;
-	 
-	 packet_builder #(NUM_CHAN) rx_pkt_builer (
-	     .rxclk ( rxclk ),
-	     .reset ( reset ),
-		  .adctime ( adctime ),
-		  .channels ( 4'd1 ), 
-	     .chan_rdreq ( chan_rdreq ),
-	     .chan_fifodata ( chan_fifodata ),
-	     .chan_empty ( chan_empty ),
-	     .rd_select ( rd_select ),
-	     .chan_usedw ( chan_usedw ),
-	     .WR ( WR ),
-	     .fifodata ( fifodata ),
-	     .have_space ( have_space ),
-		 .rssi_0(rssi_0), .rssi_1(rssi_1),
-		.rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),
-    .overrun(tx_overrun), .underrun(tx_underrun));
-	 
-	 // Detect overrun
-	 always @(posedge rxclk)
-        if(reset)
-            rx_overrun <= 1'b0;
-        else if(rx_full[0])
-            rx_overrun <= 1'b1;
-        else if(clear_status)
-            rx_overrun <= 1'b0;
-
-	reg [6:0] test;
-	always @(posedge rxclk)
-		if (reset)
-			test <= 0;
-		else
-			test <= test + 7'd1;
-		
-	 // TODO write this genericly
-	 wire [15:0]ch[NUM_CHAN:0];
-	 assign ch[0] = ch_0;
-	 
-	 wire cmd_empty;
-	 always @(posedge rxclk)
-        if(reset)
-            rx_WR_enabled <= 1;
-		else if(cmd_empty)
-            rx_WR_enabled <= 1;
-        else if(rx_WR_done)
-            rx_WR_enabled <= 0;
-
-	wire [15:0] dataout [0:NUM_CHAN];
-	wire [9:0]  usedw	[0:NUM_CHAN];
-	wire empty[0:NUM_CHAN];
-	
-	 generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
-     begin : generate_channel_fifos
-		wire rdreq;
-
-		assign rdreq = (rd_select == i) & chan_rdreq;
-		//assign chan_empty[i] = usedw[i] < 10'd126;
-        fifo_1kx16	rx_chan_fifo (
-	         .aclr ( reset ),
-	         .clock ( rxclk ),
-	         .data ( ch[i] ),
-	         .rdreq ( rdreq ),
-			 .wrreq ( ~rx_full[i] & rxstrobe),
-	         .empty (empty[i]),
-	         .full (rx_full[i]),
-	         .q ( dataout[i]),
-             .usedw ( usedw[i]),
-			 .almost_empty(chan_empty[i])
-		);
-     end
-     endgenerate
-	wire [7:0] debug;
-	 fifo_1kx16 rx_cmd_fifo (
-	         .aclr ( reset ),
-	         .clock ( rxclk ),
-	         .data ( rx_databus ),
-	         .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),
-			 .wrreq ( rx_WR & rx_WR_enabled),
-	         .empty ( cmd_empty),
-	         .full ( rx_full[NUM_CHAN] ),
-	         .q ( dataout[NUM_CHAN]),
-             .usedw ( usedw[NUM_CHAN] )
-	);	
-  	assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;
-	assign chan_fifodata 	= dataout[rd_select];
-	assign chan_usedw	  	= usedw[rd_select];
-    assign debugbus = {rxstrobe, chan_rdreq, debug, 
-				rx_full[0], chan_empty[0], empty[0], have_space, RD, rxclk};
-endmodule
+//`include "../../firmware/include/fpga_regs_common.v"

+//`include "../../firmware/include/fpga_regs_standard.v"

+module rx_buffer_inband

+  ( input usbclk,

+    input bus_reset,

+    input reset,  // DSP side reset (used here), do not reset registers

+    input reset_regs, //Only reset registers

+    output [15:0] usbdata,

+    input RD,

+    output wire have_pkt_rdy,

+    output reg rx_overrun,

+    input wire [3:0] channels,

+    input wire [15:0] ch_0,

+    input wire [15:0] ch_1,

+    input wire [15:0] ch_2,

+    input wire [15:0] ch_3,

+    input wire [15:0] ch_4,

+    input wire [15:0] ch_5,

+    input wire [15:0] ch_6,

+    input wire [15:0] ch_7,

+    input rxclk,

+    input rxstrobe,

+    input clear_status,

+    input [6:0] serial_addr, 

+    input [31:0] serial_data, 

+    input serial_strobe,

+    output wire [15:0] debugbus,

+	

+    //Connection with tx_inband

+    input rx_WR,

+    input [15:0] rx_databus,

+    input rx_WR_done,

+    output reg rx_WR_enabled,

+    //signal strength

+    input wire [31:0] rssi_0, input wire [31:0] rssi_1,

+    input wire [31:0] rssi_2, input wire [31:0] rssi_3,

+    input wire [1:0] tx_underrun

+    );

+    

+    parameter NUM_CHAN = 1;

+    genvar i ;

+    

+    // FX2 Bug Fix

+    reg [8:0] read_count;

+    always @(negedge usbclk)

+        if(bus_reset)

+            read_count <= #1 9'd0;

+        else if(RD & ~read_count[8])

+            read_count <= #1 read_count + 9'd1;

+        else

+            read_count <= #1 RD ? read_count : 9'b0;

+       

+	// Time counter

+	reg [31:0] timestamp_clock;

+	always @(posedge rxclk)

+		if (reset)

+			timestamp_clock <= 0;

+		else

+			timestamp_clock <= timestamp_clock + 1;

+     

+  // USB side fifo

+  wire [11:0] rdusedw;

+  wire [11:0] wrusedw;

+  wire [15:0] fifodata;

+  wire [15:0] fifodata_il[0:NUM_CHAN];

+  wire WR;

+  wire have_space;

+  reg sel;

+  reg wr;

+

+  always@(posedge rxclk)

+    begin

+      if(reset)

+        begin

+          sel<=1;

+          wr<=0;

+        end

+      else if(rxstrobe)

+        begin

+          sel<=0;

+          wr<=1;

+        end

+      else if(wr&~sel)

+          sel<=1;

+      else if(wr&sel)

+          wr<=0;

+      else

+          wr<=0;

+    end

+

+  assign fifodata_il[0] = (sel)?ch_1:ch_0;

+  assign fifodata_il[1] = (sel)?ch_3:ch_2;

+

+  fifo_4kx16_dc	rx_usb_fifo (

+    .aclr ( reset ),

+    .data ( fifodata ),

+    .rdclk ( ~usbclk ),

+    .rdreq ( RD & ~read_count[8] ),

+    .wrclk ( rxclk ),

+    .wrreq ( WR ),

+    .q ( usbdata ),

+    .rdempty (  ),

+    .rdusedw ( rdusedw ),

+    .wrfull (  ),

+    .wrusedw ( wrusedw ) );

+    

+  assign have_pkt_rdy = (rdusedw >= 12'd256);

+  assign have_space = (wrusedw < 12'd760);

+	 

+  // Rx side fifos

+  // These are of size [NUM_CHAN:0] because the extra channel is used for the

+  // RX command channel.  If there were no command channel, they would be

+  // NUM_CHAN-1.

+  wire chan_rdreq;

+  wire [15:0] chan_fifodata;

+  wire [9:0] chan_usedw;

+  wire [NUM_CHAN:0] chan_empty;

+  wire [3:0] rd_select;

+  wire [NUM_CHAN:0] rx_full;

+	 

+  packet_builder #(NUM_CHAN) rx_pkt_builer (

+    .rxclk ( rxclk ),

+    .reset ( reset ),

+    .timestamp_clock ( timestamp_clock ),

+    .channels ( NUM_CHAN ),

+    .chan_rdreq ( chan_rdreq ),

+    .chan_fifodata ( chan_fifodata ),

+    .chan_empty ( chan_empty ),

+    .rd_select ( rd_select ),

+    .chan_usedw ( chan_usedw ),

+    .WR ( WR ),

+    .fifodata ( fifodata ),

+    .have_space ( have_space ),

+      .rssi_0(rssi_0), .rssi_1(rssi_1),

+      .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),

+      .underrun(tx_underrun));

+	 

+  // Detect overrun

+  always @(posedge rxclk)

+    if(reset)

+      rx_overrun <= 1'b0;

+    else if(rx_full[0])

+      rx_overrun <= 1'b1;

+    else if(clear_status)

+      rx_overrun <= 1'b0;

+

+		

+  // FIXME: what is the purpose of these two lines?

+  wire [15:0]ch[NUM_CHAN:0];

+  assign ch[0] = ch_0;

+	

+  wire cmd_empty;

+	

+  always @(posedge rxclk)

+    if(reset)

+      rx_WR_enabled <= 1;

+    else if(cmd_empty)

+      rx_WR_enabled <= 1;

+    else if(rx_WR_done)

+      rx_WR_enabled <= 0;

+

+

+  // Of Size 0:NUM_CHAN due to extra command channel.

+  wire [15:0] dataout [0:NUM_CHAN];

+  wire [9:0]  usedw	[0:NUM_CHAN];

+  wire empty[0:NUM_CHAN];

+	

+  generate for (i = 0 ; i < NUM_CHAN; i = i + 1)

+    begin : generate_channel_fifos

+

+      wire rdreq;

+

+      assign rdreq = (rd_select == i) & chan_rdreq;

+

+      fifo_1kx16 rx_chan_fifo (

+      .aclr ( reset ),

+      .clock ( rxclk ),

+      .data ( fifodata_il[i] ),

+      .rdreq ( rdreq ),

+      .wrreq ( ~rx_full[i] & wr),

+      .empty (empty[i]),

+      .full (rx_full[i]),

+      .q ( dataout[i]),

+      .usedw ( usedw[i]),

+      .almost_empty(chan_empty[i])

+      );

+    end

+  endgenerate

+	

+  wire [7:0] debug;

+	 

+  fifo_1kx16 rx_cmd_fifo (

+    .aclr ( reset ),

+    .clock ( rxclk ),

+    .data ( rx_databus ),

+    .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),

+    .wrreq ( rx_WR & rx_WR_enabled),

+    .empty ( cmd_empty),

+    .full ( rx_full[NUM_CHAN] ),

+    .q ( dataout[NUM_CHAN]),

+    .usedw ( usedw[NUM_CHAN] )

+  );

+	

+  assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;

+  assign chan_fifodata = dataout[rd_select];

+  assign chan_usedw = usedw[rd_select];

+  assign debugbus = {4'd0, rxclk, rxstrobe, rx_full[0], rx_full[1], sel, wr};

+

+endmodule

diff --git a/inband_lib/tx_buffer_inband.v b/inband_lib/tx_buffer_inband.v
index fec9dbe31..2dd75f42f 100755
--- a/inband_lib/tx_buffer_inband.v
+++ b/inband_lib/tx_buffer_inband.v
@@ -1,224 +1,143 @@
 module tx_buffer_inband
-  ( usbclk, bus_reset, reset, usbdata, WR, have_space, 
-    channels, tx_i_0, tx_q_0, tx_i_1, tx_q_1,
-    tx_i_2, tx_q_2, tx_i_3, tx_q_3, txclk, txstrobe,
-    clear_status, tx_empty, debugbus, 
-	rx_databus, rx_WR, rx_WR_done, rx_WR_enabled, reg_io_enable,
-	reg_data_in, reg_data_out, reg_addr, rssi_0, rssi_1, rssi_2, 
-    rssi_3, rssi_wait, threshhold, tx_underrun
-   );
+  ( //System
+    input wire usbclk, input wire bus_reset, input wire reset, 
+    input wire [15:0] usbdata, output wire have_space, input wire [3:0] channels, 
+    //output transmit signals
+    output wire [15:0] tx_i_0, output wire [15:0] tx_q_0, 
+    output wire [15:0] tx_i_1, output wire [15:0] tx_q_1,
+    output wire [15:0] tx_i_2, output wire [15:0] tx_q_2, 
+    output wire [15:0] tx_i_3, output wire [15:0] tx_q_3, 
+    input wire txclk, input wire txstrobe, input wire WR,
+    input wire clear_status, output wire tx_empty, output wire [15:0] debugbus, 
+    //command reader io
+    output wire [15:0] rx_databus, output wire rx_WR, output wire rx_WR_done, 
+    input wire rx_WR_enabled,
+    //register io 
+    output wire [1:0] reg_io_enable, output wire [31:0] reg_data_in, output wire [6:0] reg_addr,
+    input wire [31:0] reg_data_out,  
+    //input characteristic signals
+    input wire [31:0] rssi_0, input wire [31:0] rssi_1, input wire [31:0] rssi_2, 
+    input wire [31:0] rssi_3, input wire [31:0] rssi_wait, input wire [31:0] threshhold, 
+    output wire [1:0] tx_underrun, 
+    //system stop
+    output wire stop, output wire [15:0] stop_time);
 	
-    parameter NUM_CHAN	 =      2 ;
-	/* Debug paramters */
-    parameter STROBE_RATE_0 =   8'd1 ;
-    parameter STROBE_RATE_1 =   8'd2 ;
+   parameter NUM_CHAN	 =      1 ;
     
-    input   wire                usbclk ;
-    input   wire                bus_reset ; // Used here for the 257-Hack to fix the FX2 bug
-    input   wire                reset ; // standard DSP-side reset
-    input   wire         [15:0] usbdata ;
-    input   wire                WR ;
-    input   wire                txclk ;
-    input   wire                txstrobe ;
-	input 	wire				rx_WR_enabled;
-    /* Not used yet */
-    input   wire          [3:0] channels ;
-    input   wire                clear_status ;
-    /*register io*/
-    input   wire          [31:0]reg_data_out;
-    // rssi
-    input	wire		  [31:0]rssi_0;
-    input	wire		  [31:0]rssi_1;
-    input	wire		  [31:0]rssi_2;
-    input	wire		  [31:0]rssi_3;
-    input	wire		  [31:0]threshhold;
-	input	wire		  [31:0]rssi_wait;
-	
-    output  wire                have_space ;
-    output  wire                tx_empty ;
-    output  wire         [15:0] tx_i_0 ;
-    output  wire         [15:0] tx_q_0 ;
-    output  wire         [15:0] tx_i_1 ;
-    output  wire         [15:0] tx_q_1 ;
-    output  wire         [15:0] debugbus ;
-    /* Not used yet */
-    output  wire         [15:0] tx_i_2 ;
-    output  wire         [15:0] tx_q_2 ;
-    output  wire         [15:0] tx_i_3 ;
-    output  wire         [15:0] tx_q_3 ;
-
-	output	wire		 [15:0] rx_databus ;
-	output	wire		 		rx_WR;
-	output 	wire				rx_WR_done;
-    /* reg_io */
-    output  wire         [31:0] reg_data_in;
-    output  wire         [6:0]  reg_addr;
-    output  wire         [1:0]  reg_io_enable;
-	output	wire		 [NUM_CHAN-1:0] tx_underrun;
-
-    /* To generate channel readers */
-    genvar i ;
+   /* To generate channel readers */
+   genvar i ;
     
-    /* These will eventually be external register */
-    reg                  [31:0] adc_time ;
-    wire                  [7:0] txstrobe_rate [NUM_CHAN-1:0] ;
-    wire				 [31:0] rssi [3:0];
-    assign rssi[0] = rssi_0;
-    assign rssi[1] = rssi_1;
-    assign rssi[2] = rssi_2;
-    assign rssi[3] = rssi_3;
+   /* These will eventually be external register */
+   reg                  [31:0] timestamp_clock ;
+   wire                 [7:0]  txstrobe_rate [NUM_CHAN-1:0] ;
+   wire			        [31:0] rssi [3:0];
+   assign rssi[0] = rssi_0;
+   assign rssi[1] = rssi_1;
+   assign rssi[2] = rssi_2;
+   assign rssi[3] = rssi_3;
    
-	always @(posedge txclk)
-		if (reset)
-			adc_time <= 0;
-		else if (txstrobe)
-			adc_time <= adc_time + 1;
+   always @(posedge txclk)
+       if (reset)
+           timestamp_clock <= 0;
+       else
+           timestamp_clock <= timestamp_clock + 1;
 
 
     /* Connections between tx_usb_fifo_reader and
        cnannel/command processing blocks */
-    wire                 [31:0] tx_data_bus ;
-    wire           [NUM_CHAN:0] chan_WR ;
-    wire           [NUM_CHAN:0] chan_done ;
+   wire                  [31:0] tx_data_bus ;
+   wire            [NUM_CHAN:0] chan_WR ;
+   wire            [NUM_CHAN:0] chan_done ;
     
     /* Connections between data block and the
        FX2/TX chains */
-    wire           [NUM_CHAN:0] chan_underrun ;
-    wire           [NUM_CHAN:0] chan_txempty ;
+   wire            [NUM_CHAN:0] chan_underrun;
+   wire            [NUM_CHAN:0] chan_txempty;
    
-    /* Conections between tx_data_packet_fifo and
+   /* Conections between tx_data_packet_fifo and
        its reader + strobe generator */
-    wire                 [31:0] chan_fifodata [NUM_CHAN:0] ;
-    wire                        chan_pkt_waiting [NUM_CHAN:0] ;
-    wire                        chan_rdreq [NUM_CHAN:0] ;
-    wire                        chan_skip [NUM_CHAN:0] ;
-    wire           [NUM_CHAN:0] chan_have_space ;
-    wire                        chan_txstrobe [NUM_CHAN-1:0] ;
+   wire                 [31:0] chan_fifodata [NUM_CHAN:0] ;
+   wire                        chan_pkt_waiting [NUM_CHAN:0] ;
+   wire                        chan_rdreq [NUM_CHAN:0] ;
+   wire                        chan_skip [NUM_CHAN:0] ;
+   wire                        chan_have_space [NUM_CHAN:0] ;
 
-	wire				[14:0]  debug;
+   wire		            [14:0] debug [NUM_CHAN:0];
     
-    /* Outputs to transmit chains */
-    wire                 [15:0] tx_i [NUM_CHAN-1:0] ;
-    wire                 [15:0] tx_q [NUM_CHAN-1:0] ;
+   /* Outputs to transmit chains */
+   wire                 [15:0] tx_i [NUM_CHAN:0] ;
+   wire                 [15:0] tx_q [NUM_CHAN:0] ;
+
+   assign tx_i[NUM_CHAN] = 0;
+   assign tx_q[NUM_CHAN] = 0;
     
-	/* TODO: Figure out how to write this genericly */
-    assign have_space = chan_have_space[0] & chan_have_space[1];
-    assign tx_empty = chan_txempty[0] & chan_txempty[1] ;
-    assign tx_i_0 = chan_txempty[0] ? 16'b0 : tx_i[0] ;
-    assign tx_q_0 = chan_txempty[0] ? 16'b0 : tx_q[0] ;
-    assign tx_i_1 = chan_txempty[1] ? 16'b0 : tx_i[1] ;
-    assign tx_q_1 = chan_txempty[1] ? 16'b0 : tx_q[1] ;
+   assign have_space = chan_have_space[0] & chan_have_space[1];
+   assign tx_empty = chan_txempty[0] & chan_txempty[1] ;
+
+   assign tx_i_0 = chan_txempty[0] ? 16'b0 : tx_i[0] ;
+   assign tx_q_0 = chan_txempty[0] ? 16'b0 : tx_q[0] ;
+   assign tx_i_1 = chan_txempty[1] ? 16'b0 : tx_i[1] ;
+   assign tx_q_1 = chan_txempty[1] ? 16'b0 : tx_q[1] ;
         
-    /* Debug statement */
-    assign txstrobe_rate[0] = STROBE_RATE_0 ;
-    assign txstrobe_rate[1] = STROBE_RATE_1 ;
-	assign tx_q_2 = 16'b0 ;
-	assign tx_i_2 = 16'b0 ;
-	assign tx_q_3 = 16'b0 ;
-	assign tx_i_3 = 16'b0 ;
-	assign tx_i_3 = 16'b0 ;
+   assign tx_q_2 = 16'b0 ;
+   assign tx_i_2 = 16'b0 ;
+   assign tx_q_3 = 16'b0 ;
+   assign tx_i_3 = 16'b0 ;
+   assign tx_i_3 = 16'b0 ;
 	
-	assign debugbus = {debug, txclk};
+   assign debugbus = {have_space, txclk, WR, WR_final, chan_WR, chan_done, 
+                      chan_pkt_waiting[0], chan_pkt_waiting[1],
+                      chan_rdreq[0], chan_rdreq[1], chan_txempty[0], chan_txempty[1]};
 
-	wire [31:0] usbdata_final;
-	wire		WR_final;
+   wire [31:0] usbdata_final;
+   wire		WR_final;
 
-	tx_packer tx_usb_packer
-	(
-				.bus_reset			(bus_reset),
-				.usbclk				(usbclk),
-				.WR_fx2				(WR),
-				.usbdata			(usbdata),
-				.reset				(reset),
-				.txclk				(txclk),
-				.usbdata_final 		(usbdata_final),
-				.WR_final			(WR_final)
-	);
+   tx_packer tx_usb_packer
+   (.bus_reset(bus_reset), .usbclk(usbclk), .WR_fx2(WR),
+    .usbdata(usbdata), .reset(reset), .txclk(txclk),
+    .usbdata_final(usbdata_final), .WR_final(WR_final));
 	
-	channel_demux channel_demuxer
-	(
-				.usbdata_final		(usbdata_final),
-				.WR_final			(WR_final),
-				.reset				(reset),
-				.txclk				(txclk),
-                .WR_channel         (chan_WR),
-                .WR_done_channel    (chan_done),
-                .ram_data           (tx_data_bus)				
-	);
+   channel_demux #(NUM_CHAN) channel_demuxer
+   (.usbdata_final(usbdata_final), .WR_final(WR_final),
+    .reset(reset), .txclk(txclk), .WR_channel(chan_WR),
+    .WR_done_channel(chan_done), .ram_data(tx_data_bus));
 	
-    generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
-    begin : generate_channel_readers
-		assign tx_underrun[i] = chan_underrun[i];
-        channel_ram tx_data_packet_fifo 
-            (      .reset               (reset),
-                   .txclk               (txclk), 
-                   .datain              (tx_data_bus),
-                   .WR                  (chan_WR[i]),
-                   .WR_done             (chan_done[i]),
-                   .have_space          (chan_have_space[i]),
-                   .dataout             (chan_fifodata[i]),
-                   .packet_waiting      (chan_pkt_waiting[i]),
-                   .RD                  (chan_rdreq[i]),
-                   .RD_done             (chan_skip[i])
-             );
+   generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+     begin : generate_channel_readers
+       assign tx_underrun[i] = chan_underrun[i];
 
-        chan_fifo_reader tx_chan_reader 
-           (       .reset               (reset),
-                   .tx_clock            (txclk),
-                   .tx_strobe           (txstrobe),
-                   .adc_time            (adc_time),
-                   .samples_format      (4'b0),
-                   .tx_q                (tx_q[i]),
-                   .tx_i                (tx_i[i]),
-                   .underrun            (chan_underrun[i]),
-                   .skip             	(chan_skip[i]),
-                   .rdreq               (chan_rdreq[i]),
-                   .fifodata            (chan_fifodata[i]),
-                   .pkt_waiting         (chan_pkt_waiting[i]),
-                   .tx_empty            (chan_txempty[i]),
-                   .rssi				(rssi[i]),
-                   .threshhold			(threshhold),
-				   .rssi_wait			(rssi_wait)
-            );	    
-        
+       channel_ram tx_data_packet_fifo 
+       (.reset(reset), .txclk(txclk), .datain(tx_data_bus),
+        .WR(chan_WR[i]), .WR_done(chan_done[i]),
+        .have_space(chan_have_space[i]), .dataout(chan_fifodata[i]),
+        .packet_waiting(chan_pkt_waiting[i]), .RD(chan_rdreq[i]),
+        .RD_done(chan_skip[i]));
+
+       chan_fifo_reader tx_chan_reader 
+       (.reset(reset), .tx_clock(txclk), .tx_strobe(txstrobe),
+        .timestamp_clock(timestamp_clock), .samples_format(4'b0),          
+        .tx_q(tx_q[i]), .tx_i(tx_i[i]), .underrun(chan_underrun[i]),
+        .skip(chan_skip[i]), .rdreq(chan_rdreq[i]),
+        .fifodata(chan_fifodata[i]), .pkt_waiting(chan_pkt_waiting[i]),
+        .tx_empty(chan_txempty[i]), .rssi(rssi[i]), .debug(debug[i]),
+        .threshhold(threshhold), .rssi_wait(rssi_wait));	         
     end
     endgenerate
 
 
-	channel_ram tx_cmd_packet_fifo 
-            (      .reset               (reset),
-                   .txclk               (txclk), 
-                   .datain              (tx_data_bus),
-                   .WR                  (chan_WR[NUM_CHAN]),
-                   .WR_done             (chan_done[NUM_CHAN]),
-                   .have_space          (chan_have_space[NUM_CHAN]),
-                   .dataout             (chan_fifodata[NUM_CHAN]),
-                   .packet_waiting      (chan_pkt_waiting[NUM_CHAN]),
-                   .RD                  (chan_rdreq[NUM_CHAN]),
-                   .RD_done             (chan_skip[NUM_CHAN])
-             );
+   channel_ram tx_cmd_packet_fifo 
+   (.reset(reset), .txclk(txclk), .datain(tx_data_bus), .WR(chan_WR[NUM_CHAN]),
+    .WR_done(chan_done[NUM_CHAN]), .have_space(chan_have_space[NUM_CHAN]),
+    .dataout(chan_fifodata[NUM_CHAN]), .packet_waiting(chan_pkt_waiting[NUM_CHAN]),
+    .RD(chan_rdreq[NUM_CHAN]), .RD_done(chan_skip[NUM_CHAN]));
 
-
-	cmd_reader tx_cmd_reader
-		(		.reset					(reset),
-				.txclk					(txclk),
-				.adc_time				(adc_time),
-				.skip					(chan_skip[NUM_CHAN]),
-				.rdreq					(chan_rdreq[NUM_CHAN]),
-				.fifodata				(chan_fifodata[NUM_CHAN]),
-				.pkt_waiting			(chan_pkt_waiting[NUM_CHAN]),
-				.rx_databus				(rx_databus),
-				.rx_WR					(rx_WR),
-				.rx_WR_done				(rx_WR_done),
-				.rx_WR_enabled			(rx_WR_enabled),
-				.reg_data_in			(reg_data_in),
-				.reg_data_out			(reg_data_out),
-				.reg_addr				(reg_addr),
-				.reg_io_enable			(reg_io_enable),
-				.debug					(debug)
-		);
-				
-		
-   
+   cmd_reader tx_cmd_reader
+   (.reset(reset), .txclk(txclk), .timestamp_clock(timestamp_clock), .skip(chan_skip[NUM_CHAN]),
+    .rdreq(chan_rdreq[NUM_CHAN]), .fifodata(chan_fifodata[NUM_CHAN]),
+    .pkt_waiting(chan_pkt_waiting[NUM_CHAN]), .rx_databus(rx_databus),
+    .rx_WR(rx_WR), .rx_WR_done(rx_WR_done), .rx_WR_enabled(rx_WR_enabled),
+    .reg_data_in(reg_data_in), .reg_data_out(reg_data_out), .reg_addr(reg_addr),
+    .reg_io_enable(reg_io_enable), .debug(debug[NUM_CHAN]), .stop(stop), .stop_time(stop_time));
+				   
 endmodule // tx_buffer
 
diff --git a/inband_lib/usb_fifo_reader.v b/inband_lib/usb_fifo_reader.v
deleted file mode 100755
index d002d90ff..000000000
--- a/inband_lib/usb_fifo_reader.v
+++ /dev/null
@@ -1,25 +0,0 @@
-module usb_fifo_reader (
-      input usbclk,
-      input bus_reset, 
-      input RD,
-      output rdreq,
-      );
-      
-    // FX2 Bug Fix
-    reg [8:0] read_count;
-    always @(negedge usbclk)
-        if(bus_reset)
-            read_count <= #1 9'd0;
-        else if(RD & ~read_count[8])
-            read_count <= #1 read_count + 9'd1;
-        else
-            read_count <= #1 RD ? read_count : 9'b0;
-            
-    assign rdreq = RD & ~read_count[8];
-    
-    
- 
-endmodule
-       
-   
-   
\ No newline at end of file
diff --git a/inband_lib/usb_fifo_writer.v b/inband_lib/usb_fifo_writer.v
deleted file mode 100755
index abe1dd567..000000000
--- a/inband_lib/usb_fifo_writer.v
+++ /dev/null
@@ -1,183 +0,0 @@
-
-module usb_fifo_writer
-   #(parameter BUS_WIDTH = 16,
-     parameter NUM_CHAN = 2,
-     parameter FIFO_WIDTH = 32)
-   (     //FX2 Side
-			input bus_reset, 
-			input usbclk, 
-			input WR_fx2, 
-			input [15:0]usbdata,
-			
-			// TX Side
-			input reset,
-			input txclk,
-			output reg [NUM_CHAN:0] WR_channel,
-			output reg [FIFO_WIDTH-1:0] ram_data,
-			output reg [NUM_CHAN:0] WR_done_channel );
-   
-
-	reg [8:0] write_count;
-
-	/* Fix FX2 bug */
-	always @(posedge usbclk)
-    	if(bus_reset)        // Use bus reset because this is on usbclk
-       		write_count <= #1 0;
-    	else if(WR_fx2 & ~write_count[8])
-    		write_count <= #1 write_count + 9'd1;
-    	else
-    		write_count <= #1 WR_fx2 ? write_count : 9'b0;
-
-	reg WR_fx2_fixed;
-	reg [15:0]usbdata_fixed;
-	
-	always @(posedge usbclk) 
-	begin
-	   WR_fx2_fixed <= WR_fx2 & ~write_count[8];
-	   usbdata_fixed <= usbdata;
-	end
-
-	/* Used to convert 16 bits bus_data to the 32 bits wide fifo */
-    reg                             word_complete ;
-    reg     [BUS_WIDTH-1:0]         usbdata_delayed ;
-    reg                             writing ;
-	wire	[FIFO_WIDTH-1:0]		usbdata_packed ;    
-	wire							WR_packed ;
-   
-    always @(posedge usbclk)
-    begin
-        if (bus_reset)
-          begin
-            word_complete <= 0 ;
-            writing <= 0 ;
-          end
-        else if (WR_fx2_fixed)
-          begin
-            writing <= 1 ;
-            if (word_complete)
-                word_complete <= 0 ;
-            else
-              begin
-                usbdata_delayed <= usbdata_fixed ;
-                word_complete <= 1 ;
-              end
-          end
-        else
-            writing <= 0 ;
-	end
-    
-	assign usbdata_packed = {usbdata_fixed, usbdata_delayed} ;
-    assign WR_packed = word_complete & writing ;
-
-	/* Make sure data are sync with usbclk */
- 	reg [31:0]usbdata_usbclk;
-	reg WR_usbclk; 
-    
-    always @(posedge usbclk)
-    begin
-    	if (WR_packed)
-    		usbdata_usbclk <= usbdata_packed;
-        WR_usbclk <= WR_packed;
-    end
-
-	/* Cross clock boundaries */
-	reg [FIFO_WIDTH-1:0] usbdata_tx ;
-	reg WR_tx;
-    reg WR_1;
-    reg WR_2;
-	reg [31:0] usbdata_final;
-	reg WR_final;
-   
-	always @(posedge txclk) usbdata_tx <= usbdata_usbclk;
-
-    always @(posedge txclk) 
-    	if (reset)
-    		WR_1 <= 0;
-    	else
-       		WR_1 <= WR_usbclk;
-
-    always @(posedge txclk) 
-    	if (reset)
-       		WR_2 <= 0;
-    	else
-      		WR_2 <= WR_1;
-
-	always @(posedge txclk)
-	begin
-		if (reset)
-			WR_tx <= 0;
-		else
-		   WR_tx <= WR_1 & ~WR_2;
-	end
-	
-	always @(posedge txclk)
-	begin
-	   if (reset)
-	      WR_final <= 0;
-	   else
-	   begin
-	      WR_final <= WR_tx; 
-	      if (WR_tx)
-	         usbdata_final <= usbdata_tx;
-	   end
-	end
-	     
-	/* Parse header and forward to ram */
-	reg [3:0]reader_state;
-	reg [4:0]channel ;
-	reg [9:0]read_length ;
-	
-	parameter IDLE = 4'd0;
-	parameter HEADER = 4'd1;
-	parameter WAIT = 4'd2;
-	parameter FORWARD = 4'd3;
-	
-	`define CHANNEL 20:16
-	`define PKT_SIZE 512
-	
-	always @(posedge txclk)
-	begin
-	    if (reset)
-	      begin
-	       reader_state <= 0;
-	       WR_channel <= 0;
-	       WR_done_channel <= 0;
-	      end
-	      else
-	        case (reader_state)
-	        IDLE: begin
-	            if (WR_final)
-	                reader_state <= HEADER; 
-	            end
-	       
-            // Store channel and forware header
-	        HEADER: begin
-	            channel <= (usbdata_final[`CHANNEL] == 5'h1f ? NUM_CHAN : usbdata_final[`CHANNEL]) ;
-	            WR_channel[(usbdata_final[`CHANNEL] == 5'h1f ? NUM_CHAN : usbdata_final[`CHANNEL])] <= 1;
-				//channel <= usbdata_final[`CHANNEL] ;
-	            //WR_channel[usbdata_final[`CHANNEL]] <= 1;
-	            ram_data <= usbdata_final;
-				read_length <= 10'd4 ;
-				
-                reader_state <= WAIT;
-	        end
-	       
-	        WAIT: begin
-	           WR_channel[channel] <= 0;
-	
-			   if (read_length == `PKT_SIZE)
-	               reader_state <= IDLE;
-	           else if (WR_final)
-	               reader_state <= FORWARD;
-	        end
-	       
-	        FORWARD: begin
-	           WR_channel[channel] <= 1;
-	           ram_data <= usbdata_final;
-	           read_length <= read_length + 10'd4;
-	           
-	           reader_state <= WAIT;
-	        end
-	       endcase
-	end
-endmodule  
\ No newline at end of file
diff --git a/megacells/fifo_1kx16.bsf b/megacells/fifo_1kx16.bsf
index 329be2d44..2de80816f 100755
--- a/megacells/fifo_1kx16.bsf
+++ b/megacells/fifo_1kx16.bsf
@@ -95,7 +95,7 @@ applicable agreement for further details.
 	)

 	(drawing

 		(text "16 bits x 1024 words" (rect 58 132 144 144)(font "Arial" ))

-		(text "almost_empty < 126" (rect 58 122 144 134)(font "Arial" ))

+		(text "almost_empty < 504" (rect 58 122 144 134)(font "Arial" ))

 		(line (pt 16 16)(pt 144 16)(line_width 1))

 		(line (pt 144 16)(pt 144 144)(line_width 1))

 		(line (pt 144 144)(pt 16 144)(line_width 1))

diff --git a/megacells/fifo_1kx16.v b/megacells/fifo_1kx16.v
index e22b416e5..4f7e94ef5 100755
--- a/megacells/fifo_1kx16.v
+++ b/megacells/fifo_1kx16.v
@@ -86,7 +86,7 @@ module fifo_1kx16 (
 				);

 	defparam

 		scfifo_component.add_ram_output_register = "OFF",

-		scfifo_component.almost_empty_value = 126,

+		scfifo_component.almost_empty_value = 504,

 		scfifo_component.intended_device_family = "Cyclone",

 		scfifo_component.lpm_hint = "RAM_BLOCK_TYPE=M4K",

 		scfifo_component.lpm_numwords = 1024,

@@ -105,7 +105,7 @@ endmodule
 // CNX file retrieval info

 // ============================================================

 // Retrieval info: PRIVATE: AlmostEmpty NUMERIC "1"

-// Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "126"

+// Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "504"

 // Retrieval info: PRIVATE: AlmostFull NUMERIC "0"

 // Retrieval info: PRIVATE: AlmostFullThr NUMERIC "-1"

 // Retrieval info: PRIVATE: CLOCKS_ARE_SYNCHRONIZED NUMERIC "0"

@@ -133,7 +133,7 @@ endmodule
 // Retrieval info: PRIVATE: wsFull NUMERIC "1"

 // Retrieval info: PRIVATE: wsUsedW NUMERIC "0"

 // Retrieval info: CONSTANT: ADD_RAM_OUTPUT_REGISTER STRING "OFF"

-// Retrieval info: CONSTANT: ALMOST_EMPTY_VALUE NUMERIC "126"

+// Retrieval info: CONSTANT: ALMOST_EMPTY_VALUE NUMERIC "504"

 // Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone"

 // Retrieval info: CONSTANT: LPM_HINT STRING "RAM_BLOCK_TYPE=M4K"

 // Retrieval info: CONSTANT: LPM_NUMWORDS NUMERIC "1024"

diff --git a/megacells/fifo_1kx16_bb.v b/megacells/fifo_1kx16_bb.v
index 283aada81..9d9912bc2 100755
--- a/megacells/fifo_1kx16_bb.v
+++ b/megacells/fifo_1kx16_bb.v
@@ -57,7 +57,7 @@ endmodule
 // CNX file retrieval info

 // ============================================================

 // Retrieval info: PRIVATE: AlmostEmpty NUMERIC "1"

-// Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "126"

+// Retrieval info: PRIVATE: AlmostEmptyThr NUMERIC "504"

 // Retrieval info: PRIVATE: AlmostFull NUMERIC "0"

 // Retrieval info: PRIVATE: AlmostFullThr NUMERIC "-1"

 // Retrieval info: PRIVATE: CLOCKS_ARE_SYNCHRONIZED NUMERIC "0"

@@ -85,7 +85,7 @@ endmodule
 // Retrieval info: PRIVATE: wsFull NUMERIC "1"

 // Retrieval info: PRIVATE: wsUsedW NUMERIC "0"

 // Retrieval info: CONSTANT: ADD_RAM_OUTPUT_REGISTER STRING "OFF"

-// Retrieval info: CONSTANT: ALMOST_EMPTY_VALUE NUMERIC "126"

+// Retrieval info: CONSTANT: ALMOST_EMPTY_VALUE NUMERIC "504"

 // Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone"

 // Retrieval info: CONSTANT: LPM_HINT STRING "RAM_BLOCK_TYPE=M4K"

 // Retrieval info: CONSTANT: LPM_NUMWORDS NUMERIC "1024"

diff --git a/rbf/Makefile.am b/rbf/Makefile.am
index 49d2f2592..c7c9ce670 100644
--- a/rbf/Makefile.am
+++ b/rbf/Makefile.am
@@ -26,8 +26,12 @@ datadir = $(prefix)/share/usrp
 rbfs = 				\
 	rev2/std_2rxhb_2tx.rbf	\
 	rev2/std_4rx_0tx.rbf	\
+	rev2/inband_1rxhb_1tx.rbf	\
+	rev2/inband_2rxhb_2tx.rbf	\
 	rev4/std_2rxhb_2tx.rbf	\
 	rev4/std_4rx_0tx.rbf    \
+	rev4/inband_1rxhb_1tx.rbf	\
+	rev4/inband_2rxhb_2tx.rbf	\
 	rev2/multi_2rxhb_2tx.rbf	\
 	rev4/multi_2rxhb_2tx.rbf		
 
diff --git a/rbf/rev2/inband_1rxhb_1tx.rbf b/rbf/rev2/inband_1rxhb_1tx.rbf
new file mode 100755
index 000000000..c1c9af2ce
--- /dev/null
+++ b/rbf/rev2/inband_1rxhb_1tx.rbf
diff --git a/rbf/rev2/inband_2rxhb_2tx.rbf b/rbf/rev2/inband_2rxhb_2tx.rbf
new file mode 100755
index 000000000..ca1a0f92b
--- /dev/null
+++ b/rbf/rev2/inband_2rxhb_2tx.rbf
diff --git a/rbf/rev4/inband_1rxhb_1tx.rbf b/rbf/rev4/inband_1rxhb_1tx.rbf
new file mode 100755
index 000000000..c1c9af2ce
--- /dev/null
+++ b/rbf/rev4/inband_1rxhb_1tx.rbf
diff --git a/rbf/rev4/inband_2rxhb_2tx.rbf b/rbf/rev4/inband_2rxhb_2tx.rbf
new file mode 100755
index 000000000..ca1a0f92b
--- /dev/null
+++ b/rbf/rev4/inband_2rxhb_2tx.rbf
diff --git a/toplevel/usrp_inband_usb/config.vh b/toplevel/usrp_inband_usb/config.vh
index 3291dc10b..007a529e3 100644
--- a/toplevel/usrp_inband_usb/config.vh
+++ b/toplevel/usrp_inband_usb/config.vh
@@ -34,7 +34,7 @@
   `include "../include/common_config_1rxhb_1tx.vh"
 
 // Uncomment this for 2 rx channels (w/ halfband) & 2 transmit channels
-//`include "../include/common_config_2rxhb_2tx.vh"
+//  `include "../include/common_config_2rxhb_2tx.vh"
 
 // Uncomment this for 4 rx channels (w/o halfband) & 0 transmit channels
 //`include "../include/common_config_4rx_0tx.vh"
diff --git a/toplevel/usrp_inband_usb/usrp_inband_usb.qsf b/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
index c9eebc1ad..ae0807f6f 100644
--- a/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
+++ b/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
@@ -27,7 +27,7 @@
 # ========================
 set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0
 set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04  JULY 13, 2003"
-set_global_assignment -name LAST_QUARTUS_VERSION "5.1 SP1"
+set_global_assignment -name LAST_QUARTUS_VERSION "7.2 SP2"
 
 # Pin & Location Assignments
 # ==========================
@@ -392,7 +392,6 @@ set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/ram16_2sum.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_rom.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/halfband_decim.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/mac.v
-set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_ram.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/tx_chain.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_dcoffset.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/adc_interface.v
@@ -419,4 +418,6 @@ set_global_assignment -name VERILOG_FILE ../../sdr_lib/serial_io.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/strobe_gen.v
 set_global_assignment -name VERILOG_FILE ../../sdr_lib/sign_extend.v
 set_global_assignment -name VERILOG_FILE ../../inband_lib/channel_ram.v
-set_global_assignment -name VERILOG_FILE ../../inband_lib/register_io.v
\ No newline at end of file
+set_global_assignment -name VERILOG_FILE ../../inband_lib/register_io.v
+set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
+set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"
\ No newline at end of file
diff --git a/toplevel/usrp_inband_usb/usrp_inband_usb.v b/toplevel/usrp_inband_usb/usrp_inband_usb.v
index cc625b0e7..79f0dfa4a 100644
--- a/toplevel/usrp_inband_usb/usrp_inband_usb.v
+++ b/toplevel/usrp_inband_usb/usrp_inband_usb.v
@@ -97,8 +97,6 @@ module usrp_inband_usb
    // Tri-state bus macro
    bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) );
 
-   assign      clk64 = master_clk;
-
    wire [15:0] ch0tx,ch1tx,ch2tx,ch3tx; //,ch4tx,ch5tx,ch6tx,ch7tx;
    wire [15:0] ch0rx,ch1rx,ch2rx,ch3rx,ch4rx,ch5rx,ch6rx,ch7rx;
    
@@ -129,19 +127,7 @@ module usrp_inband_usb
    assign      bb_tx_q0 = ch1tx;
    assign      bb_tx_i1 = ch2tx;
    assign      bb_tx_q1 = ch3tx;
-   
-wire [6:0] reg_addr;
-wire [31:0] reg_data_out;
-wire [31:0] reg_data_in;
-wire [1:0] reg_io_enable;
-wire [31:0] rssi_threshhold;
-wire [31:0] rssi_wait;
-
-register_io register_control
-(.clk(clk64),.reset(1'b0),.enable(reg_io_enable),.addr(reg_addr),.datain(reg_data_in),
- .dataout(reg_data_out),.rssi_0(rssi_0), .rssi_1(rssi_1), .rssi_2(rssi_2), 
- .rssi_3(rssi_3), .threshhold(rssi_threshhold), .rssi_wait(rssi_wait));
-wire [1:0] tx_overrun;
+
 wire [1:0] tx_underrun;
 
 `ifdef TX_IN_BAND
@@ -164,9 +150,15 @@ wire [1:0] tx_underrun;
 	   .reg_data_out(reg_data_out),
 	   .reg_data_in(reg_data_in),
 	   .reg_io_enable(reg_io_enable),
-	   .debugbus(),
+	   .debugbus(rx_debugbus),
 	   .rssi_0(rssi_0), .rssi_1(rssi_1), .rssi_2(rssi_2), 
-       .rssi_3(rssi_3), .threshhold(rssi_threshhold), .rssi_wait(rssi_wait));
+       .rssi_3(rssi_3), .threshhold(rssi_threshhold), .rssi_wait(rssi_wait),
+	   .stop(stop), .stop_time(stop_time));
+
+  `ifdef TX_DUAL
+    defparam tx_buffer.NUM_CHAN=2;
+  `endif
+
 `else
    tx_buffer tx_buffer
      ( .usbclk(usbclk),.bus_reset(tx_bus_reset),.reset(tx_dsp_reset),
@@ -276,14 +268,18 @@ wire [1:0] tx_underrun;
        .ch_6(ch6rx),.ch_7(ch7rx),
        .rxclk(clk64),.rxstrobe(hb_strobe),
        .clear_status(clear_status),
-       .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
 	   .rx_WR(rx_WR),
 	   .rx_databus(rx_databus),
 	   .rx_WR_done(rx_WR_done),
 	   .rx_WR_enabled(rx_WR_enabled),
 	   .debugbus(tx_debugbus),
 	   .rssi_0(rssi_0), .rssi_1(rssi_1), .rssi_2(rssi_2), .rssi_3(rssi_3),
-	   .tx_overrun(tx_overrun), .tx_underrun(tx_underrun));
+	   .tx_underrun(tx_underrun));
+    
+    `ifdef RX_DUAL
+      defparam rx_buffer.NUM_CHAN=2;
+    `endif
+
    `else
    rx_buffer rx_buffer
      ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset),
@@ -357,11 +353,52 @@ wire [1:0] tx_underrun;
    serial_io serial_io
      ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI),
        .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO),
-       .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+       .serial_addr(addr_db),.serial_data(data_db),.serial_strobe(strobe_db),
        .readback_0({io_rx_a,io_tx_a}),.readback_1({io_rx_b,io_tx_b}),.readback_2(capabilities),.readback_3(32'hf0f0931a),
        .readback_4(rssi_0),.readback_5(rssi_1),.readback_6(rssi_2),.readback_7(rssi_3)
        );
 
+   wire [6:0] reg_addr;
+   wire [31:0] reg_data_out;
+   wire [31:0] reg_data_in;
+   wire [1:0] reg_io_enable;
+   wire [31:0] rssi_threshhold;
+   wire [31:0] rssi_wait;
+   wire [6:0] addr_wr;
+   wire [31:0] data_wr;
+   wire strobe_wr;
+   wire [6:0] addr_db;
+   wire [31:0] data_db;
+   wire strobe_db;
+   assign serial_strobe = strobe_db | strobe_wr;
+   assign serial_addr = (strobe_db)? (addr_db) : (addr_wr);
+   assign serial_data = (strobe_db)? (data_db) : (data_wr);	
+   //assign serial_strobe = strobe_wr;
+   //assign serial_data = data_wr;
+   //assign serial_addr = addr_wr;
+
+   register_io register_control
+    (.clk(clk64),.reset(1'b0),.enable(reg_io_enable),.addr(reg_addr),.datain(reg_data_in),
+     .dataout(reg_data_out), .addr_wr(addr_wr), .data_wr(data_wr), .strobe_wr(strobe_wr),
+     .rssi_0(rssi_0), .rssi_1(rssi_1), .rssi_2(rssi_2), 
+     .rssi_3(rssi_3), .threshhold(rssi_threshhold), .rssi_wait(rssi_wait),
+	 .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3),
+     .debug_en(debug_en), .misc(settings), 
+	 .txmux({dac3mux,dac2mux,dac1mux,dac0mux,tx_realsignals,tx_numchan}));
+   
+   
+   //implementing freeze mode
+   reg [15:0] timestop;
+   wire stop;
+   wire [15:0] stop_time;
+   assign	clk64 = (timestop == 0) ? master_clk : 0;
+   always @(posedge master_clk)
+		if (timestop[15:0] != 0)
+			timestop <= timestop - 16'd1;
+		else if (stop)
+			timestop <= stop_time;
+						
+
    wire [15:0] reg_0,reg_1,reg_2,reg_3;
    master_control master_control
      ( .master_clk(clk64),.usbclk(usbclk),
@@ -374,8 +411,8 @@ wire [1:0] tx_underrun;
        .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
        .tx_empty(tx_empty),
        //.debug_0(rx_a_a),.debug_1(ddc0_in_i),
-       .debug_0(tx_debugbus),.debug_1(tx_debugbus),
-       .debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,(tx_underrun == 0),rx_overrun,decim_rate}),
+       .debug_0(rx_debugbus),.debug_1(ddc0_in_i),
+       .debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}),
        .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) );
    
    io_pins io_pins