remove time_sync and master_timer.

Master timer replaced with simple_timer which needs new memory map and control
functions.  it allows onetime and periodic interrupts.  Copied from quad_radio

time_sync functionality will go in time_64bit.  Right now it only does
external SMA connector, not mimo connector

3 files changed, 82 insertions, 22 deletions

diff --git a/timing/simple_timer.v b/timing/simple_timer.v
new file mode 100644
index 000000000..17c7f1c36
--- /dev/null
+++ b/timing/simple_timer.v
@@ -0,0 +1,60 @@
+
+
+module simple_timer
+  #(parameter BASE=0)
+   (input clk, input reset,
+    input set_stb, input [7:0] set_addr, input [31:0] set_data,
+    output reg onetime_int, output reg periodic_int);
+
+   reg [31:0]  onetime_ctr;
+   always @(posedge clk)
+     if(reset)
+       begin
+	  onetime_int 	  <= 0;
+	  onetime_ctr 	  <= 0;
+       end
+     else
+       if(set_stb & (set_addr == BASE))
+	 begin
+	    onetime_int   <= 0;
+	    onetime_ctr   <= set_data;
+	 end
+       else 
+	 begin
+	    if(onetime_ctr == 1)
+	      onetime_int <= 1;
+	    if(onetime_ctr != 0)
+	      onetime_ctr <= onetime_ctr - 1;
+	    else
+	      onetime_int <= 0;
+	 end // else: !if(set_stb & (set_addr == BASE))
+   
+   reg [31:0]  periodic_ctr, period;
+   always @(posedge clk)
+     if(reset)
+       begin
+	  periodic_int 	     <= 0;
+	  periodic_ctr 	     <= 0;
+	  period 	     <= 0;
+       end
+     else
+       if(set_stb & (set_addr == (BASE+1)))
+	 begin
+	    periodic_int     <= 0;
+	    periodic_ctr     <= set_data;
+	    period 	     <= set_data;
+	 end
+       else 
+	 if(periodic_ctr == 1)
+	   begin
+	      periodic_int   <= 1;
+	      periodic_ctr   <= period;
+	   end
+	 else
+	   if(periodic_ctr != 0)
+	     begin
+		periodic_int <= 0;
+		periodic_ctr <= periodic_ctr - 1;
+	     end
+   
+endmodule // simple_timer
diff --git a/top/u2_core/u2_core.v b/top/u2_core/u2_core.v
index 8cd150cb6..e384e2b93 100644
--- a/top/u2_core/u2_core.v
+++ b/top/u2_core/u2_core.v
@@ -141,6 +141,7 @@ module u2_core
    localparam SR_TX_DSP = 208;
    localparam SR_TX_CTRL = 224;
    localparam SR_TIME64 = 192;
+   localparam SR_SIMTIMER = 198;
    
    wire [7:0] 	set_addr;
    wire [31:0] 	set_data;
@@ -150,7 +151,8 @@ module u2_core
    wire 	ram_loader_rst, wb_rst, dsp_rst;
 
    wire [31:0] 	status, status_b0, status_b1, status_b2, status_b3, status_b4, status_b5, status_b6, status_b7;
-   wire 	bus_error, spi_int, i2c_int, pps_int, timer_int, buffer_int, proc_int, overrun, underrun, uart_tx_int, uart_rx_int;
+   wire 	bus_error, spi_int, i2c_int, pps_int, onetime_int, periodic_int, buffer_int;
+   wire 	proc_int, overrun, underrun, uart_tx_int, uart_rx_int;
 
    wire [31:0] 	debug_gpio_0, debug_gpio_1;
    wire [31:0] 	atr_lines;
@@ -481,8 +483,8 @@ module u2_core
 
    assign irq= {{8'b0},
 		{8'b0},
-		{4'b0, clk_status, serdes_link_up, uart_tx_int, uart_rx_int},
-		{pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,timer_int,buffer_int}};
+		{3'b0, periodic_int, clk_status, serdes_link_up, uart_tx_int, uart_rx_int},
+		{pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,onetime_int,buffer_int}};
    
    pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[3:2]),
 	   .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int),
@@ -491,13 +493,25 @@ module u2_core
    // /////////////////////////////////////////////////////////////////////////
    // Master Timer, Slave #9
 
+   // No longer used, replaced with simple_timer below
+   /*
    wire [31:0] 	 master_time;
    timer timer
      (.wb_clk_i(wb_clk),.rst_i(wb_rst),
       .cyc_i(s9_cyc),.stb_i(s9_stb),.adr_i(s9_adr[4:2]),
       .we_i(s9_we),.dat_i(s9_dat_o),.dat_o(s9_dat_i),.ack_o(s9_ack),
       .sys_clk_i(dsp_clk),.master_time_i(master_time),.int_o(timer_int) );
-
+    */
+   assign s9_ack = 0;
+   
+   // /////////////////////////////////////////////////////////////////////////
+   //  Simple Timer interrupts
+   
+   simple_timer #(.BASE(SR_SIMTIMER)) simple_timer
+     (.clk(wb_clk), .reset(wb_rst),
+      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+      .onetime_int(onetime_int), .periodic_int(periodic_int));
+   
    // /////////////////////////////////////////////////////////////////////////
    // UART, Slave #10
 
@@ -525,22 +539,9 @@ module u2_core
    // //////////////////////////////////////////////////////////////////////////
    // Time Sync, Slave #12 
 
-   reg 		 pps_posedge, pps_negedge, pps_pos_d1, pps_neg_d1;
-   always @(negedge dsp_clk) pps_negedge <= pps_in;
-   always @(posedge dsp_clk) pps_posedge <= pps_in;
-   always @(posedge dsp_clk) pps_pos_d1 <= pps_posedge;
-   always @(posedge dsp_clk) pps_neg_d1 <= pps_negedge;   
+   // No longer used, see time_64bit.  Still need to handle mimo time, though
+   assign sc_ack = 0;
    
-   wire 	 pps_o;
-   time_sync time_sync
-     (.wb_clk_i(wb_clk),.rst_i(wb_rst),
-      .cyc_i(sc_cyc),.stb_i(sc_stb),.adr_i(sc_adr[4:2]),
-      .we_i(sc_we),.dat_i(sc_dat_o),.dat_o(sc_dat_i),.ack_o(sc_ack),
-      .sys_clk_i(dsp_clk),.master_time_o(master_time),
-      .pps_posedge(pps_posedge),.pps_negedge(pps_negedge),
-      .exp_pps_in(exp_pps_in),.exp_pps_out(exp_pps_out),
-      .int_o(pps_int),.epoch_o(epoch),.pps_o(pps_o) );
-
    // /////////////////////////////////////////////////////////////////////////
    // SD Card Reader / Writer, Slave #13
 
@@ -678,7 +679,7 @@ module u2_core
 
    time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit
      (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
-      .pps(pps_o), .vita_time(vita_time), .pps_int());
+      .pps(pps_in), .vita_time(vita_time), .pps_int(pps_int));
    
    // /////////////////////////////////////////////////////////////////////////////////////////
    // Debug Pins
diff --git a/top/u2_rev3/Makefile b/top/u2_rev3/Makefile
index 1f8bbe304..57d55106f 100644
--- a/top/u2_rev3/Makefile
+++ b/top/u2_rev3/Makefile
@@ -179,8 +179,7 @@ timing/time_64bit.v \
 timing/time_compare.v \
 timing/time_receiver.v \
 timing/time_sender.v \
-timing/time_sync.v \
-timing/timer.v \
+timing/simple_timer.v \
 top/u2_core/u2_core.v \
 top/u2_rev3/u2_rev3.ucf \
 top/u2_rev3/u2_rev3.v