summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMatt Ettus <matt@ettus.com>2010-10-06 16:17:13 -0700
committerMatt Ettus <matt@ettus.com>2010-10-06 16:17:13 -0700
commit1715dd3cbbe41fff273e5b8a407595903cbd491a (patch)
tree956caa54f1945950db78e47f3a8678c53d618733
parent1c3dfe21f8bacbf762b440a23ce652a879288615 (diff)
parentc07bc03b4f0fe6210f3bfc6ecdc079487d882f7d (diff)
downloaduhd-1715dd3cbbe41fff273e5b8a407595903cbd491a.tar.gz
uhd-1715dd3cbbe41fff273e5b8a407595903cbd491a.tar.bz2
uhd-1715dd3cbbe41fff273e5b8a407595903cbd491a.zip
Merge branch 'ise12' into efifo_merge_dcm
* ise12: fix timing problem on DAC output bus clean up DAC inversion and swapping to match schematics Clean up iq swapping on RX. It is now swapped in the top level. widened muxes to 4 bits to match tx side and handle more ADCs in future
-rw-r--r--usrp2/sdr_lib/dsp_core_rx.v35
-rw-r--r--usrp2/top/u2_rev3/u2_core_udp.v2
-rw-r--r--usrp2/top/u2_rev3/u2_rev3.v15
3 files changed, 23 insertions, 29 deletions
diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/dsp_core_rx.v
index 1e689fc7f..1318809d6 100644
--- a/usrp2/sdr_lib/dsp_core_rx.v
+++ b/usrp2/sdr_lib/dsp_core_rx.v
@@ -57,41 +57,32 @@ module dsp_core_rx
(.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
.adc_in(adc_b),.adc_out(adc_b_ofs));
- wire [3:0] muxctrl;
- setting_reg #(.my_addr(BASE+5)) sr_8
+ wire [7:0] muxctrl;
+ setting_reg #(.my_addr(BASE+5), .width(8)) sr_8
(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out({UNUSED_2,muxctrl}),.changed());
wire [1:0] gpio_ena;
- setting_reg #(.my_addr(BASE+6)) sr_9
+ setting_reg #(.my_addr(BASE+6), .width(2)) sr_9
(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out({UNUSED_3,gpio_ena}),.changed());
- // The TVRX connects to what is called adc_b, thus A and B are
- // swapped throughout the design.
- //
- // In the interest of expediency and keeping the s/w sane, we just remap them here.
- // The I & Q fields are mapped the same:
- // 0 -> "the real A" (as determined by the TVRX)
- // 1 -> "the real B"
- // 2 -> const zero
-
always @(posedge clk)
- case(muxctrl[1:0]) // The I mapping
- 0: adc_i <= adc_b_ofs; // "the real A"
- 1: adc_i <= adc_a_ofs;
+ case(muxctrl[3:0]) // The I mapping
+ 0: adc_i <= adc_a_ofs;
+ 1: adc_i <= adc_b_ofs;
2: adc_i <= 0;
default: adc_i <= 0;
- endcase // case(muxctrl[1:0])
-
+ endcase // case (muxctrl[3:0])
+
always @(posedge clk)
- case(muxctrl[3:2]) // The Q mapping
- 0: adc_q <= adc_b_ofs; // "the real A"
- 1: adc_q <= adc_a_ofs;
+ case(muxctrl[7:4]) // The Q mapping
+ 0: adc_q <= adc_a_ofs;
+ 1: adc_q <= adc_b_ofs;
2: adc_q <= 0;
default: adc_q <= 0;
- endcase // case(muxctrl[3:2])
-
+ endcase // case (muxctrl[7:4])
+
always @(posedge clk)
if(rst)
phase <= 0;
diff --git a/usrp2/top/u2_rev3/u2_core_udp.v b/usrp2/top/u2_rev3/u2_core_udp.v
index bcbaa1f30..2cf7fe5ee 100644
--- a/usrp2/top/u2_rev3/u2_core_udp.v
+++ b/usrp2/top/u2_rev3/u2_core_udp.v
@@ -427,7 +427,7 @@ module u2_core
cycle_count <= cycle_count + 1;
//compatibility number -> increment when the fpga has been sufficiently altered
- localparam compat_num = 32'd1;
+ localparam compat_num = 32'd2;
wb_readback_mux buff_pool_status
(.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb),
diff --git a/usrp2/top/u2_rev3/u2_rev3.v b/usrp2/top/u2_rev3/u2_rev3.v
index 53f1e0a14..4f7f9bf1a 100644
--- a/usrp2/top/u2_rev3/u2_rev3.v
+++ b/usrp2/top/u2_rev3/u2_rev3.v
@@ -203,12 +203,13 @@ module u2_rev3
reg [13:0] adc_a_reg1, adc_b_reg1, adc_a_reg2, adc_b_reg2;
reg adc_ovf_a_reg1, adc_ovf_a_reg2, adc_ovf_b_reg1, adc_ovf_b_reg2;
+ // ADC A and B are swapped in schematic to facilitate clean layout
always @(posedge dsp_clk)
begin
- adc_a_reg1 <= adc_a;
- adc_b_reg1 <= adc_b;
- adc_ovf_a_reg1 <= adc_ovf_a;
- adc_ovf_b_reg1 <= adc_ovf_b;
+ adc_a_reg1 <= adc_b;
+ adc_b_reg1 <= adc_a;
+ adc_ovf_a_reg1 <= adc_ovf_b;
+ adc_ovf_b_reg1 <= adc_ovf_a;
end
always @(posedge dsp_clk)
@@ -327,8 +328,10 @@ module u2_rev3
end
wire [15:0] dac_a_int, dac_b_int;
- always @(negedge dsp_clk) dac_a <= dac_a_int;
- always @(negedge dsp_clk) dac_b <= dac_b_int;
+ // DAC A and B are swapped in schematic to facilitate clean layout
+ // DAC A is also inverted in schematic to facilitate clean layout
+ always @(posedge dsp_clk) dac_a <= ~dac_b_int;
+ always @(posedge dsp_clk) dac_b <= dac_a_int;
/*
OFDDRRSE OFDDRRSE_serdes_inst