fpga: x400: Add axi_inter_4x64_512_bd IP

3 files changed, 604 insertions, 0 deletions

diff --git a/fpga/usrp3/top/x400/ip/Makefile.inc b/fpga/usrp3/top/x400/ip/Makefile.inc
index 40ec71b9a..45a50149f 100644
--- a/fpga/usrp3/top/x400/ip/Makefile.inc
+++ b/fpga/usrp3/top/x400/ip/Makefile.inc
@@ -9,6 +9,7 @@ include $(IP_DIR)/x4xx_ps_rfdc_bd/Makefile.inc
 include $(IP_DIR)/axi_interconnect_app_bd/Makefile.inc
 include $(IP_DIR)/axi_interconnect_eth_bd/Makefile.inc
 include $(IP_DIR)/axi_interconnect_dma_bd/Makefile.inc
+include $(IP_DIR)/axi_inter_4x64_512_bd/Makefile.inc
 include $(IP_DIR)/axi_inter_2x128_512_bd/Makefile.inc
 include $(IP_DIR)/ddr4_64bits/Makefile.inc
 include $(IP_DIR)/adc_100m_bd/Makefile.inc
@@ -31,6 +32,7 @@ $(IP_AXI_INTERCONNECT_ETH_BD_SRCS) \
 $(IP_AXI_INTERCONNECT_ETH_HDL_SRCS) \
 $(IP_AXI_INTERCONNECT_DMA_BD_SRCS) \
 $(IP_AXI_INTERCONNECT_DMA_HDL_SRCS) \
+$(IP_AXI_INTER_4X64_512_BD_SRCS) \
 $(IP_AXI_INTER_2X128_512_BD_SRCS) \
 $(IP_ADC_100M_BD_SRCS) \
 $(IP_ADC_100M_HDL_SRCS) \
@@ -59,6 +61,7 @@ $(BD_X4XX_PS_RFDC_BD_OUTS) \
 $(BD_AXI_INTERCONNECT_APP_BD_OUTS) \
 $(BD_AXI_INTERCONNECT_ETH_BD_OUTS) \
 $(BD_AXI_INTERCONNECT_DMA_BD_OUTS) \
+$(BD_AXI_INTER_4x64_512_BD_OUTS) \
 $(BD_AXI_INTER_2X128_512_BD_OUTS) \
 $(BD_ADC_100M_BD_OUTS) \
 $(BD_ADC_400M_BD_OUTS)  \
diff --git a/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/Makefile.inc b/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/Makefile.inc
new file mode 100644
index 000000000..4fbf90cae
--- /dev/null
+++ b/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/Makefile.inc
@@ -0,0 +1,28 @@
+#
+# Copyright 2022 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+
+include $(TOOLS_DIR)/make/viv_ip_builder.mak
+
+IP_AXI_INTER_4X64_512_ORIG_SRCS = $(addprefix $(IP_DIR)/axi_inter_4x64_512_bd/, \
+axi_inter_4x64_512_bd.tcl \
+)
+
+IP_AXI_INTER_4X64_512_BDTCL_SRCS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x64_512_bd/, \
+axi_inter_4x64_512_bd.tcl \
+)
+
+IP_AXI_INTER_4X64_512_BD_SRCS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x64_512_bd/, \
+axi_inter_4x64_512_bd/axi_inter_4x64_512_bd.bd \
+)
+
+BD_AXI_INTER_4X64_512_BD_OUTS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x64_512_bd/, \
+axi_inter_4x64_512_bd.bd.out \
+axi_inter_4x64_512_bd/axi_inter_4x64_512_bd_ooc.xdc \
+axi_inter_4x64_512_bd/synth/axi_inter_4x64_512_bd.v \
+)
+
+$(IP_AXI_INTER_4X64_512_BD_SRCS) $(BD_AXI_INTER_4X64_512_BD_OUTS) $(IP_AXI_INTER_4X64_512_BDTCL_SRCS): $(IP_AXI_INTER_4X64_512_ORIG_SRCS)
+	$(call BUILD_VIVADO_BDTCL,axi_inter_4x64_512_bd,$(ARCH),$(PART_ID),$(IP_DIR),$(IP_BUILD_DIR),$(LIB_DIR)/vivado_ipi)
diff --git a/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/axi_inter_4x64_512_bd.tcl b/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/axi_inter_4x64_512_bd.tcl
new file mode 100644
index 000000000..c99f0856d
--- /dev/null
+++ b/fpga/usrp3/top/x400/ip/axi_inter_4x64_512_bd/axi_inter_4x64_512_bd.tcl
@@ -0,0 +1,573 @@
+
+################################################################
+# This is a generated script based on design: axi_inter_4x64_512_bd
+#
+# Though there are limitations about the generated script,
+# the main purpose of this utility is to make learning
+# IP Integrator Tcl commands easier.
+################################################################
+
+namespace eval _tcl {
+proc get_script_folder {} {
+   set script_path [file normalize [info script]]
+   set script_folder [file dirname $script_path]
+   return $script_folder
+}
+}
+variable script_folder
+set script_folder [_tcl::get_script_folder]
+
+################################################################
+# Check if script is running in correct Vivado version.
+################################################################
+set scripts_vivado_version 2019.1
+set current_vivado_version [version -short]
+
+if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
+   puts ""
+   catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
+
+   return 1
+}
+
+################################################################
+# START
+################################################################
+
+# To test this script, run the following commands from Vivado Tcl console:
+# source axi_inter_4x64_512_bd_script.tcl
+
+# If there is no project opened, this script will create a
+# project, but make sure you do not have an existing project
+# <./myproj/project_1.xpr> in the current working folder.
+
+set list_projs [get_projects -quiet]
+if { $list_projs eq "" } {
+   create_project project_1 myproj -part xczu28dr-ffvg1517-1-e
+}
+
+
+# CHANGE DESIGN NAME HERE
+variable design_name
+set design_name axi_inter_4x64_512_bd
+
+# If you do not already have an existing IP Integrator design open,
+# you can create a design using the following command:
+#    create_bd_design $design_name
+
+# Creating design if needed
+set errMsg ""
+set nRet 0
+
+set cur_design [current_bd_design -quiet]
+set list_cells [get_bd_cells -quiet]
+
+if { ${design_name} eq "" } {
+   # USE CASES:
+   #    1) Design_name not set
+
+   set errMsg "Please set the variable <design_name> to a non-empty value."
+   set nRet 1
+
+} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
+   # USE CASES:
+   #    2): Current design opened AND is empty AND names same.
+   #    3): Current design opened AND is empty AND names diff; design_name NOT in project.
+   #    4): Current design opened AND is empty AND names diff; design_name exists in project.
+
+   if { $cur_design ne $design_name } {
+      common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
+      set design_name [get_property NAME $cur_design]
+   }
+   common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
+
+} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
+   # USE CASES:
+   #    5) Current design opened AND has components AND same names.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 1
+} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
+   # USE CASES: 
+   #    6) Current opened design, has components, but diff names, design_name exists in project.
+   #    7) No opened design, design_name exists in project.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 2
+
+} else {
+   # USE CASES:
+   #    8) No opened design, design_name not in project.
+   #    9) Current opened design, has components, but diff names, design_name not in project.
+
+   common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
+
+   create_bd_design $design_name
+
+   common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
+   current_bd_design $design_name
+
+}
+
+  # Add USER_COMMENTS on $design_name
+  set_property USER_COMMENTS.comment_0 "Note 1: The ID width of the AXI interconnect (xbar) master changes depending on the axi_interconnect optimization strategy. It will be zero for 'minimize area' and non-zero for 'maximize performance'.
+Note 2: I have explicitly set ID width to 1 on the input ports to match our AXI master and to 4 on the output block to match the DRAM slave." [get_bd_designs $design_name]
+
+common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
+
+if { $nRet != 0 } {
+   catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
+   return $nRet
+}
+
+set bCheckIPsPassed 1
+##################################################################
+# CHECK IPs
+##################################################################
+set bCheckIPs 1
+if { $bCheckIPs == 1 } {
+   set list_check_ips "\ 
+xilinx.com:ip:axi_crossbar:2.1\
+xilinx.com:ip:axi_dwidth_converter:2.1\
+xilinx.com:ip:axi_register_slice:2.1\
+"
+
+   set list_ips_missing ""
+   common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
+
+   foreach ip_vlnv $list_check_ips {
+      set ip_obj [get_ipdefs -all $ip_vlnv]
+      if { $ip_obj eq "" } {
+         lappend list_ips_missing $ip_vlnv
+      }
+   }
+
+   if { $list_ips_missing ne "" } {
+      catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n  $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
+      set bCheckIPsPassed 0
+   }
+
+}
+
+if { $bCheckIPsPassed != 1 } {
+  common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
+  return 3
+}
+
+##################################################################
+# DESIGN PROCs
+##################################################################
+
+
+
+# Procedure to create entire design; Provide argument to make
+# procedure reusable. If parentCell is "", will use root.
+proc create_root_design { parentCell } {
+
+  variable script_folder
+  variable design_name
+
+  if { $parentCell eq "" } {
+     set parentCell [get_bd_cells /]
+  }
+
+  # Get object for parentCell
+  set parentObj [get_bd_cells $parentCell]
+  if { $parentObj == "" } {
+     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
+     return
+  }
+
+  # Make sure parentObj is hier blk
+  set parentType [get_property TYPE $parentObj]
+  if { $parentType ne "hier" } {
+     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
+     return
+  }
+
+  # Save current instance; Restore later
+  set oldCurInst [current_bd_instance .]
+
+  # Set parent object as current
+  current_bd_instance $parentObj
+
+
+  # Create interface ports
+  set M0_AXI [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M0_AXI ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.DATA_WIDTH {512} \
+   CONFIG.FREQ_HZ {350000000} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.PROTOCOL {AXI4} \
+   ] $M0_AXI
+
+  set S0_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S0_AXI ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.ARUSER_WIDTH {0} \
+   CONFIG.AWUSER_WIDTH {0} \
+   CONFIG.BUSER_WIDTH {0} \
+   CONFIG.DATA_WIDTH {64} \
+   CONFIG.FREQ_HZ {350000000} \
+   CONFIG.HAS_BRESP {1} \
+   CONFIG.HAS_BURST {1} \
+   CONFIG.HAS_CACHE {1} \
+   CONFIG.HAS_LOCK {1} \
+   CONFIG.HAS_PROT {1} \
+   CONFIG.HAS_QOS {1} \
+   CONFIG.HAS_REGION {1} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {1} \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.MAX_BURST_LENGTH {256} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_READ_THREADS {1} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_THREADS {1} \
+   CONFIG.PHASE {0.000} \
+   CONFIG.PROTOCOL {AXI4} \
+   CONFIG.READ_WRITE_MODE {READ_WRITE} \
+   CONFIG.RUSER_BITS_PER_BYTE {0} \
+   CONFIG.RUSER_WIDTH {0} \
+   CONFIG.SUPPORTS_NARROW_BURST {1} \
+   CONFIG.WUSER_BITS_PER_BYTE {0} \
+   CONFIG.WUSER_WIDTH {0} \
+   ] $S0_AXI
+
+  set S1_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S1_AXI ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.ARUSER_WIDTH {0} \
+   CONFIG.AWUSER_WIDTH {0} \
+   CONFIG.BUSER_WIDTH {0} \
+   CONFIG.DATA_WIDTH {64} \
+   CONFIG.FREQ_HZ {350000000} \
+   CONFIG.HAS_BRESP {1} \
+   CONFIG.HAS_BURST {1} \
+   CONFIG.HAS_CACHE {1} \
+   CONFIG.HAS_LOCK {1} \
+   CONFIG.HAS_PROT {1} \
+   CONFIG.HAS_QOS {1} \
+   CONFIG.HAS_REGION {1} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {1} \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.MAX_BURST_LENGTH {256} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_READ_THREADS {1} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_THREADS {1} \
+   CONFIG.PHASE {0.000} \
+   CONFIG.PROTOCOL {AXI4} \
+   CONFIG.READ_WRITE_MODE {READ_WRITE} \
+   CONFIG.RUSER_BITS_PER_BYTE {0} \
+   CONFIG.RUSER_WIDTH {0} \
+   CONFIG.SUPPORTS_NARROW_BURST {1} \
+   CONFIG.WUSER_BITS_PER_BYTE {0} \
+   CONFIG.WUSER_WIDTH {0} \
+   ] $S1_AXI
+
+  set S2_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S2_AXI ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.ARUSER_WIDTH {0} \
+   CONFIG.AWUSER_WIDTH {0} \
+   CONFIG.BUSER_WIDTH {0} \
+   CONFIG.DATA_WIDTH {64} \
+   CONFIG.FREQ_HZ {350000000} \
+   CONFIG.HAS_BRESP {1} \
+   CONFIG.HAS_BURST {1} \
+   CONFIG.HAS_CACHE {1} \
+   CONFIG.HAS_LOCK {1} \
+   CONFIG.HAS_PROT {1} \
+   CONFIG.HAS_QOS {1} \
+   CONFIG.HAS_REGION {1} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {1} \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.MAX_BURST_LENGTH {256} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_READ_THREADS {1} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_THREADS {1} \
+   CONFIG.PHASE {0.000} \
+   CONFIG.PROTOCOL {AXI4} \
+   CONFIG.READ_WRITE_MODE {READ_WRITE} \
+   CONFIG.RUSER_BITS_PER_BYTE {0} \
+   CONFIG.RUSER_WIDTH {0} \
+   CONFIG.SUPPORTS_NARROW_BURST {1} \
+   CONFIG.WUSER_BITS_PER_BYTE {0} \
+   CONFIG.WUSER_WIDTH {0} \
+   ] $S2_AXI
+
+  set S3_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S3_AXI ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.ARUSER_WIDTH {0} \
+   CONFIG.AWUSER_WIDTH {0} \
+   CONFIG.BUSER_WIDTH {0} \
+   CONFIG.DATA_WIDTH {64} \
+   CONFIG.FREQ_HZ {350000000} \
+   CONFIG.HAS_BRESP {1} \
+   CONFIG.HAS_BURST {1} \
+   CONFIG.HAS_CACHE {1} \
+   CONFIG.HAS_LOCK {1} \
+   CONFIG.HAS_PROT {1} \
+   CONFIG.HAS_QOS {1} \
+   CONFIG.HAS_REGION {1} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {1} \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.MAX_BURST_LENGTH {256} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_READ_THREADS {1} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_THREADS {1} \
+   CONFIG.PHASE {0.000} \
+   CONFIG.PROTOCOL {AXI4} \
+   CONFIG.READ_WRITE_MODE {READ_WRITE} \
+   CONFIG.RUSER_BITS_PER_BYTE {0} \
+   CONFIG.RUSER_WIDTH {0} \
+   CONFIG.SUPPORTS_NARROW_BURST {1} \
+   CONFIG.WUSER_BITS_PER_BYTE {0} \
+   CONFIG.WUSER_WIDTH {0} \
+   ] $S3_AXI
+
+
+  # Create ports
+  set M0_AXI_ACLK [ create_bd_port -dir I -type clk M0_AXI_ACLK ]
+  set_property -dict [ list \
+   CONFIG.ASSOCIATED_BUSIF {M0_AXI} \
+   CONFIG.ASSOCIATED_RESET {M0_AXI_ARESETN} \
+   CONFIG.FREQ_HZ {350000000} \
+ ] $M0_AXI_ACLK
+  set M0_AXI_ARESETN [ create_bd_port -dir I -type rst M0_AXI_ARESETN ]
+  set_property -dict [ list \
+   CONFIG.POLARITY {ACTIVE_LOW} \
+ ] $M0_AXI_ARESETN
+  set S0_AXI_ACLK [ create_bd_port -dir I -type clk S0_AXI_ACLK ]
+  set_property -dict [ list \
+   CONFIG.ASSOCIATED_BUSIF {S0_AXI:S1_AXI:S2_AXI:S3_AXI} \
+   CONFIG.ASSOCIATED_RESET {S0_AXI_ARESETN} \
+   CONFIG.FREQ_HZ {350000000} \
+ ] $S0_AXI_ACLK
+  set S0_AXI_ARESETN [ create_bd_port -dir I -type rst S0_AXI_ARESETN ]
+
+  # Create instance: axi_crossbar_0, and set properties
+  set axi_crossbar_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_crossbar:2.1 axi_crossbar_0 ]
+  set_property -dict [ list \
+   CONFIG.DATA_WIDTH {256} \
+   CONFIG.ID_WIDTH {4} \
+   CONFIG.NUM_MI {1} \
+   CONFIG.NUM_SI {4} \
+   CONFIG.S01_BASE_ID {0x00000004} \
+   CONFIG.S02_BASE_ID {0x00000008} \
+   CONFIG.S03_BASE_ID {0x0000000c} \
+   CONFIG.S04_BASE_ID {0x00000010} \
+   CONFIG.S05_BASE_ID {0x00000014} \
+   CONFIG.S06_BASE_ID {0x00000018} \
+   CONFIG.S07_BASE_ID {0x0000001c} \
+   CONFIG.S08_BASE_ID {0x00000020} \
+   CONFIG.S09_BASE_ID {0x00000024} \
+   CONFIG.S10_BASE_ID {0x00000028} \
+   CONFIG.S11_BASE_ID {0x0000002c} \
+   CONFIG.S12_BASE_ID {0x00000030} \
+   CONFIG.S13_BASE_ID {0x00000034} \
+   CONFIG.S14_BASE_ID {0x00000038} \
+   CONFIG.S15_BASE_ID {0x0000003c} \
+ ] $axi_crossbar_0
+
+  # Create instance: axi_dwidth_converter_0, and set properties
+  set axi_dwidth_converter_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_0 ]
+  set_property -dict [ list \
+   CONFIG.FIFO_MODE {1} \
+   CONFIG.MI_DATA_WIDTH {256} \
+   CONFIG.SI_DATA_WIDTH {64} \
+   CONFIG.SI_ID_WIDTH {1} \
+   CONFIG.SYNCHRONIZATION_STAGES {3} \
+ ] $axi_dwidth_converter_0
+
+  # Create instance: axi_dwidth_converter_1, and set properties
+  set axi_dwidth_converter_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_1 ]
+  set_property -dict [ list \
+   CONFIG.FIFO_MODE {1} \
+   CONFIG.MI_DATA_WIDTH {256} \
+   CONFIG.SI_DATA_WIDTH {64} \
+   CONFIG.SI_ID_WIDTH {1} \
+   CONFIG.SYNCHRONIZATION_STAGES {3} \
+ ] $axi_dwidth_converter_1
+
+  # Create instance: axi_dwidth_converter_2, and set properties
+  set axi_dwidth_converter_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_2 ]
+  set_property -dict [ list \
+   CONFIG.FIFO_MODE {1} \
+   CONFIG.MI_DATA_WIDTH {256} \
+   CONFIG.SI_DATA_WIDTH {64} \
+   CONFIG.SI_ID_WIDTH {1} \
+   CONFIG.SYNCHRONIZATION_STAGES {3} \
+ ] $axi_dwidth_converter_2
+
+  # Create instance: axi_dwidth_converter_3, and set properties
+  set axi_dwidth_converter_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_3 ]
+  set_property -dict [ list \
+   CONFIG.FIFO_MODE {1} \
+   CONFIG.MI_DATA_WIDTH {256} \
+   CONFIG.SI_DATA_WIDTH {64} \
+   CONFIG.SI_ID_WIDTH {1} \
+   CONFIG.SYNCHRONIZATION_STAGES {3} \
+ ] $axi_dwidth_converter_3
+
+  # Create instance: axi_dwidth_converter_4, and set properties
+  set axi_dwidth_converter_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_4 ]
+  set_property -dict [ list \
+   CONFIG.ACLK_ASYNC {1} \
+   CONFIG.FIFO_MODE {2} \
+   CONFIG.MI_DATA_WIDTH {512} \
+   CONFIG.SI_DATA_WIDTH {256} \
+   CONFIG.SI_ID_WIDTH {4} \
+   CONFIG.SYNCHRONIZATION_STAGES {2} \
+ ] $axi_dwidth_converter_4
+
+  # Create instance: axi_register_slice_0, and set properties
+  set axi_register_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_0 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_0
+
+  # Create instance: axi_register_slice_1, and set properties
+  set axi_register_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_1 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_1
+
+  # Create instance: axi_register_slice_2, and set properties
+  set axi_register_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_2 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_2
+
+  # Create instance: axi_register_slice_3, and set properties
+  set axi_register_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_3 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_3
+
+  # Create instance: axi_register_slice_4, and set properties
+  set axi_register_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_4 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_4
+
+  # Create instance: axi_register_slice_5, and set properties
+  set axi_register_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_5 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_5
+
+  # Create instance: axi_register_slice_6, and set properties
+  set axi_register_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_6 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_6
+
+  # Create instance: axi_register_slice_7, and set properties
+  set axi_register_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_7 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {1} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_7
+
+  # Create instance: axi_register_slice_8, and set properties
+  set axi_register_slice_8 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_8 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {4} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_8
+
+  # Create instance: axi_register_slice_9, and set properties
+  set axi_register_slice_9 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_9 ]
+  set_property -dict [ list \
+   CONFIG.ID_WIDTH {4} \
+   CONFIG.REG_AR {1} \
+   CONFIG.REG_AW {1} \
+   CONFIG.REG_B {1} \
+ ] $axi_register_slice_9
+
+  # Create interface connections
+  connect_bd_intf_net -intf_net S0_AXI_1 [get_bd_intf_ports S0_AXI] [get_bd_intf_pins axi_register_slice_0/S_AXI]
+  connect_bd_intf_net -intf_net S1_AXI_1 [get_bd_intf_ports S1_AXI] [get_bd_intf_pins axi_register_slice_1/S_AXI]
+  connect_bd_intf_net -intf_net S2_AXI_1 [get_bd_intf_ports S2_AXI] [get_bd_intf_pins axi_register_slice_2/S_AXI]
+  connect_bd_intf_net -intf_net S3_AXI_1 [get_bd_intf_ports S3_AXI] [get_bd_intf_pins axi_register_slice_3/S_AXI]
+  connect_bd_intf_net -intf_net axi_crossbar_0_M00_AXI [get_bd_intf_pins axi_crossbar_0/M00_AXI] [get_bd_intf_pins axi_register_slice_8/S_AXI]
+  connect_bd_intf_net -intf_net axi_dwidth_converter_0_M_AXI [get_bd_intf_pins axi_dwidth_converter_0/M_AXI] [get_bd_intf_pins axi_register_slice_4/S_AXI]
+  connect_bd_intf_net -intf_net axi_dwidth_converter_1_M_AXI [get_bd_intf_pins axi_dwidth_converter_1/M_AXI] [get_bd_intf_pins axi_register_slice_5/S_AXI]
+  connect_bd_intf_net -intf_net axi_dwidth_converter_2_M_AXI1 [get_bd_intf_pins axi_dwidth_converter_2/M_AXI] [get_bd_intf_pins axi_register_slice_6/S_AXI]
+  connect_bd_intf_net -intf_net axi_dwidth_converter_3_M_AXI [get_bd_intf_pins axi_dwidth_converter_3/M_AXI] [get_bd_intf_pins axi_register_slice_7/S_AXI]
+  connect_bd_intf_net -intf_net axi_dwidth_converter_4_M_AXI [get_bd_intf_pins axi_dwidth_converter_4/M_AXI] [get_bd_intf_pins axi_register_slice_9/S_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_0_M_AXI [get_bd_intf_pins axi_dwidth_converter_0/S_AXI] [get_bd_intf_pins axi_register_slice_0/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_1_M_AXI [get_bd_intf_pins axi_dwidth_converter_1/S_AXI] [get_bd_intf_pins axi_register_slice_1/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_2_M_AXI [get_bd_intf_pins axi_dwidth_converter_2/S_AXI] [get_bd_intf_pins axi_register_slice_2/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_3_M_AXI [get_bd_intf_pins axi_dwidth_converter_3/S_AXI] [get_bd_intf_pins axi_register_slice_3/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_4_M_AXI [get_bd_intf_pins axi_crossbar_0/S00_AXI] [get_bd_intf_pins axi_register_slice_4/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_5_M_AXI [get_bd_intf_pins axi_crossbar_0/S01_AXI] [get_bd_intf_pins axi_register_slice_5/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_6_M_AXI [get_bd_intf_pins axi_crossbar_0/S02_AXI] [get_bd_intf_pins axi_register_slice_6/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_7_M_AXI [get_bd_intf_pins axi_crossbar_0/S03_AXI] [get_bd_intf_pins axi_register_slice_7/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_8_M_AXI [get_bd_intf_pins axi_dwidth_converter_4/S_AXI] [get_bd_intf_pins axi_register_slice_8/M_AXI]
+  connect_bd_intf_net -intf_net axi_register_slice_9_M_AXI [get_bd_intf_ports M0_AXI] [get_bd_intf_pins axi_register_slice_9/M_AXI]
+
+  # Create port connections
+  connect_bd_net -net M0_AXI_ACLK_1 [get_bd_ports M0_AXI_ACLK] [get_bd_pins axi_dwidth_converter_4/m_axi_aclk] [get_bd_pins axi_register_slice_9/aclk]
+  connect_bd_net -net M0_AXI_ARESETN_1 [get_bd_ports M0_AXI_ARESETN] [get_bd_pins axi_dwidth_converter_4/m_axi_aresetn] [get_bd_pins axi_register_slice_9/aresetn]
+  connect_bd_net -net S0_AXI_ACLK_1 [get_bd_ports S0_AXI_ACLK] [get_bd_pins axi_crossbar_0/aclk] [get_bd_pins axi_dwidth_converter_0/s_axi_aclk] [get_bd_pins axi_dwidth_converter_1/s_axi_aclk] [get_bd_pins axi_dwidth_converter_2/s_axi_aclk] [get_bd_pins axi_dwidth_converter_3/s_axi_aclk] [get_bd_pins axi_dwidth_converter_4/s_axi_aclk] [get_bd_pins axi_register_slice_0/aclk] [get_bd_pins axi_register_slice_1/aclk] [get_bd_pins axi_register_slice_2/aclk] [get_bd_pins axi_register_slice_3/aclk] [get_bd_pins axi_register_slice_4/aclk] [get_bd_pins axi_register_slice_5/aclk] [get_bd_pins axi_register_slice_6/aclk] [get_bd_pins axi_register_slice_7/aclk] [get_bd_pins axi_register_slice_8/aclk]
+  connect_bd_net -net S0_AXI_ARESETN_1 [get_bd_ports S0_AXI_ARESETN] [get_bd_pins axi_crossbar_0/aresetn] [get_bd_pins axi_dwidth_converter_0/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_1/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_2/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_3/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_4/s_axi_aresetn] [get_bd_pins axi_register_slice_0/aresetn] [get_bd_pins axi_register_slice_1/aresetn] [get_bd_pins axi_register_slice_2/aresetn] [get_bd_pins axi_register_slice_3/aresetn] [get_bd_pins axi_register_slice_4/aresetn] [get_bd_pins axi_register_slice_5/aresetn] [get_bd_pins axi_register_slice_6/aresetn] [get_bd_pins axi_register_slice_7/aresetn] [get_bd_pins axi_register_slice_8/aresetn]
+
+  # Create address segments
+  create_bd_addr_seg -range 0x000100000000 -offset 0x00000000 [get_bd_addr_spaces S0_AXI] [get_bd_addr_segs M0_AXI/Reg] SEG_M00_AXI_Reg
+  create_bd_addr_seg -range 0x000100000000 -offset 0x00000000 [get_bd_addr_spaces S1_AXI] [get_bd_addr_segs M0_AXI/Reg] SEG_M00_AXI_Reg
+  create_bd_addr_seg -range 0x000100000000 -offset 0x00000000 [get_bd_addr_spaces S2_AXI] [get_bd_addr_segs M0_AXI/Reg] SEG_M0_AXI_Reg
+  create_bd_addr_seg -range 0x000100000000 -offset 0x00000000 [get_bd_addr_spaces S3_AXI] [get_bd_addr_segs M0_AXI/Reg] SEG_M0_AXI_Reg
+
+
+  # Restore current instance
+  current_bd_instance $oldCurInst
+
+  validate_bd_design
+  save_bd_design
+}
+# End of create_root_design()
+
+
+##################################################################
+# MAIN FLOW
+##################################################################
+
+create_root_design ""
+
+