Brought over usrp_burn_mb_eeprom documentation changes from master

5 files changed, 8 insertions, 9 deletions

diff --git a/host/docs/gpsdo.dox b/host/docs/gpsdo.dox
index a67004acc..397bde297 100644
--- a/host/docs/gpsdo.dox
+++ b/host/docs/gpsdo.dox
@@ -45,10 +45,10 @@ To configure the USRP to communicate with the GPSDO, use the
 `usrp_burn_mb_eeprom` utility:
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=gpsdo --val=internal
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="gpsdo=internal"
 
     -- restore original setting --
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=gpsdo --val=none
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="gpsdo=internal"
 
 \section gpsdo_use Using the GPSDO in Your Application
 
diff --git a/host/docs/identification.dox b/host/docs/identification.dox
index 35b62d53e..38bc93439 100644
--- a/host/docs/identification.dox
+++ b/host/docs/identification.dox
@@ -95,7 +95,7 @@ A name has the following properties:
 Run the following commands:
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=name --val=lab1_xcvr
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="name=lab1_xcvr"
 
 \subsection id_naming_discovery Discovery via name
 
diff --git a/host/docs/usrp1.dox b/host/docs/usrp1.dox
index a6b2d3741..9dfdf02c5 100644
--- a/host/docs/usrp1.dox
+++ b/host/docs/usrp1.dox
@@ -84,7 +84,7 @@ the EEPROM, so UHD software can initialize with the correct clock rate.
 Run the following commands to record the setting into the EEPROM:
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=mcr --val=<rate>
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="mcr=<rate>"
 
 The user may override the clock rate specified in the EEPROM by using a
 device address: Example:
diff --git a/host/docs/usrp2.dox b/host/docs/usrp2.dox
index d2e9baccc..e1be733c0 100644
--- a/host/docs/usrp2.dox
+++ b/host/docs/usrp2.dox
@@ -164,7 +164,7 @@ current address of the USRP2, and the network must be setup properly as
 described above. Run the following commands: :
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr --val=192.168.10.3
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="ip-addr=192.168.10.3"
 
 #### Method 2 (Linux Only)
 
@@ -322,8 +322,7 @@ addresses have been programmed into the device's EEPROM.
 Run the following commands:
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=subnet --val=255.255.255.0
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=gateway --val=192.168.10.1
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="subnet=255.255.255.0, gateway=192.168.10.2"
 
 \subsection usrp2_altstream_rxstream Create a receive streamer
 
diff --git a/host/docs/usrp_x3x0.dox b/host/docs/usrp_x3x0.dox
index 618dd5714..7996bc7e1 100644
--- a/host/docs/usrp_x3x0.dox
+++ b/host/docs/usrp_x3x0.dox
@@ -376,12 +376,12 @@ Run the following commands:
 \b UNIX:
 
     cd <install-path>/lib/uhd/utils
-    ./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr0 --val=192.168.10.3
+    ./usrp_burn_mb_eeprom --args=<optional device args> --values="ip-addr0=192.168.10.3"
 
 \b Windows:
 
     cd <install-path>\lib\uhd\utils
-    usrp_burn_mb_eeprom.exe --args=<optional device args> --key=ip-addr0 --val=192.168.10.3
+    usrp_burn_mb_eeprom.exe --args=<optional device args> --values="ip-addr0=192.168.10.3"
 
 You must power-cycle the device before you can use this new address.