Squashed slave mode changes onto master.

7 files changed, 507 insertions, 34 deletions

diff --git a/usrp2/gpif/Makefile.srcs b/usrp2/gpif/Makefile.srcs
index bf2b7f74d..06cde8afa 100644
--- a/usrp2/gpif/Makefile.srcs
+++ b/usrp2/gpif/Makefile.srcs
@@ -11,4 +11,5 @@ gpif_wr.v \
 gpif_rd.v \
 packet_reframer.v \
 packet_splitter.v \
+slave_fifo.v \
 ))
diff --git a/usrp2/gpif/packet_reframer.v b/usrp2/gpif/packet_reframer.v
index 923d499ae..0d8232653 100644
--- a/usrp2/gpif/packet_reframer.v
+++ b/usrp2/gpif/packet_reframer.v
@@ -16,7 +16,7 @@
 //
 
 
-// Join vita packets longer than one GPIF frame, drop padding on short frames
+// Join vita packets longer than one GPIF frame
 
 module packet_reframer
   (input clk, input reset, input clear,
@@ -25,14 +25,16 @@ module packet_reframer
    output dst_rdy_o,
    output [18:0] data_o,
    output src_rdy_o,
-   input dst_rdy_i);
+   input dst_rdy_i,
+   output reg state,
+   output eof_out,
+   output reg [15:0] length);
 
-   reg [1:0] state;
-   reg [15:0] length;
+   //reg state;
+   //reg [15:0] length;
    
    localparam RF_IDLE = 0;
    localparam RF_PKT = 1;
-   localparam RF_DUMP = 2;
    
    always @(posedge clk)
      if(reset | clear)
@@ -48,25 +50,22 @@ module packet_reframer
 	   RF_PKT :
 	     begin
 		if(length == 2)
-		  if(data_i[17])
-		    state <= RF_IDLE;
-		  else
-		    state <= RF_DUMP;
+		   begin
+		  state <= RF_IDLE;
+		  length <= 0;
+		   end
 		else
 		  length <= length - 1;
 	     end
-	   RF_DUMP :
-	     if(data_i[17])
-	       state <= RF_IDLE;
 	   default :
-	     state<= RF_IDLE;
+	     state <= RF_IDLE;
 	 endcase // case (state)
    
    assign dst_rdy_o = dst_rdy_i; // this is a little pessimistic but ok
-   assign src_rdy_o = src_rdy_i & (state != RF_DUMP);
+   assign src_rdy_o = src_rdy_i;
    
    wire occ_out = 0;
-   wire eof_out = (state == RF_PKT) & (length == 2);
+   assign eof_out = (state == RF_PKT) & (length == 2);
    wire sof_out = (state == RF_IDLE);
    wire [15:0] data_out = data_i[15:0];
    assign data_o = {occ_out, eof_out, sof_out, data_out};
diff --git a/usrp2/gpif/slave_fifo.v b/usrp2/gpif/slave_fifo.v
new file mode 100644
index 000000000..faba2b107
--- /dev/null
+++ b/usrp2/gpif/slave_fifo.v
@@ -0,0 +1,467 @@
+//
+// Copyright 2011 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+//////////////////////////////////////////////////////////////////////////////////
+
+//this is a FIFO master interface for the FX2 in "slave fifo" mode.
+
+module slave_fifo
+  #(parameter TXFIFOSIZE = 11, parameter RXFIFOSIZE = 11)
+   (// GPIF signals
+    input gpif_clk, input gpif_rst,
+    inout [15:0] gpif_d,
+    input [3:0] gpif_ctl,
+    output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr,
+    
+    // Wishbone signals
+    input wb_clk, input wb_rst,
+    output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
+    output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i,
+    input [7:0] triggers,
+    
+    input dsp_rx_run,
+    
+    // FIFO interface
+    input fifo_clk, input fifo_rst, input clear_tx, input clear_rx,
+    output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
+    input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
+    input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o,
+    output tx_underrun, output rx_overrun,
+    
+    input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl,
+    output [31:0] debug0, output [31:0] debug1
+    );
+
+   // inputs to FPGA (all active low)
+   wire       FX2_DE = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA)
+   wire       FX2_CE = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB)
+   wire       FX2_DF = ~gpif_ctl[2]; //EP6 FX2 FIFO full  (FLAGC)
+   wire       FX2_CF = ~gpif_ctl[3]; //EP8 FX2 FIFO full  (FLAGD)
+
+   wire [17:0] 	  gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out;
+
+   // ////////////////////////////////////////////////////////////////////
+   // GPIF bus master state machine
+
+   //transfer size for GPIF data. this can be anything really, it's specified only for
+   //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of
+   //the double buffers in B100/B150. this should probably be a toplevel parameter or even
+   //a settings register value.
+   localparam data_transfer_size = 256;
+   localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up
+
+   // state machine i/o to four fifos
+   //tx
+   wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space
+   wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable
+   reg data_tx_dst_rdy; //sm input, data tx path has space
+   wire data_tx_src_rdy; //sm output, data tx path enable
+
+   //rx
+   wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable
+   wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space
+   wire data_rx_dst_rdy; //sm output, data rx path enable
+   wire data_rx_src_rdy; //sm input, data rx path has space
+
+   reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer
+
+   wire       sop, eop; //SOP/EOP markers for TX data packets
+   
+   reg pktend_latch;
+
+   reg [3:0] state; //state machine current state
+   localparam STATE_IDLE    = 0;
+   localparam STATE_DATA_RX = 5;
+   localparam STATE_DATA_TX = 3;
+   localparam STATE_CTRL_RX = 6;
+   localparam STATE_CTRL_TX = 9;
+   localparam STATE_DATA_TX_SLOE = 2;
+   localparam STATE_CTRL_TX_SLOE = 8;
+   localparam STATE_DATA_RX_ADR = 1;
+   localparam STATE_CTRL_RX_ADR = 4;
+   localparam STATE_PKTEND = 7;
+
+   //logs the last bus user for xfer fairness
+   //we only care about data rx vs. tx since ctrl pkts are so short
+   reg last_data_bus_hog;
+   localparam BUS_HOG_RX = 0;
+   localparam BUS_HOG_TX = 1;
+
+   // //////////////////////////////////////////////////////////////
+   // FX2 slave FIFO bus master state machine
+   //
+   always @(posedge gpif_clk)
+     if(gpif_rst) 
+       state <= STATE_IDLE;
+     else
+        begin
+       case (state)
+         STATE_IDLE:
+            begin
+           transfer_count <= 0;
+           //handle transitions to other states
+           if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data
+             state <= STATE_CTRL_TX_SLOE;
+           else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full
+             state <= STATE_CTRL_RX_ADR;
+           else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) //if there's room in the data fifo and the FX2 has data
+             state <= STATE_DATA_TX_SLOE;
+           else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full
+             state <= STATE_DATA_RX_ADR;
+           else if(data_tx_dst_rdy & ~FX2_DE)
+             state <= STATE_DATA_TX_SLOE;
+           else if(data_rx_src_rdy & ~FX2_DF)
+             state <= STATE_DATA_RX_ADR;
+           else if(~data_rx_src_rdy & ~dsp_rx_run & pktend_latch)
+             state <= STATE_PKTEND;
+             
+           if(dsp_rx_run)
+             pktend_latch <= 1;
+            end
+
+         STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD
+           state <= STATE_DATA_TX;
+         STATE_CTRL_TX_SLOE:
+           state <= STATE_CTRL_TX;
+
+         STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR
+           state <= STATE_DATA_RX;
+         STATE_CTRL_RX_ADR:
+           state <= STATE_CTRL_RX;
+
+         STATE_DATA_RX:
+            begin
+           if((transfer_count == data_transfer_size) | FX2_DF | (~data_rx_src_rdy))
+             state <= STATE_IDLE;
+
+           transfer_count <= transfer_count + 1;
+           last_data_bus_hog <= BUS_HOG_RX;
+            end
+            
+         STATE_PKTEND:
+            begin
+           state <= STATE_IDLE;
+           pktend_latch <= 0;
+            end
+            
+         STATE_DATA_TX:
+            begin
+           if((transfer_count == data_transfer_size) | FX2_DE )/*| (~data_tx_dst_rdy))*/
+             state <= STATE_IDLE;
+           transfer_count <= transfer_count + 1;
+           last_data_bus_hog <= BUS_HOG_TX;
+            end
+         STATE_CTRL_RX:
+            begin
+           if(FX2_CF | (~ctrl_rx_src_rdy))
+             state <= STATE_IDLE;
+           transfer_count <= transfer_count + 1;
+            end
+         STATE_CTRL_TX:
+            begin
+           if(FX2_CE | (~ctrl_tx_dst_rdy))
+             state <= STATE_IDLE;
+           transfer_count <= transfer_count + 1;
+            end
+       endcase
+        end
+
+   // ///////////////////////////////////////////////////////////////////
+   // fifo signal assignments and enables
+
+   //enable fifos
+   assign data_rx_dst_rdy = (state == STATE_DATA_RX);
+   assign data_tx_src_rdy = (state == STATE_DATA_TX);
+   assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX);
+   assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX);
+
+   //tx framing (this is super suspect)
+   //eop should be used only to set the EOP bit going into FIFOs
+   wire eop_data, eop_ctrl;
+   assign sop = (transfer_count == 0);
+   assign eop_data = (transfer_count == (data_transfer_size-1));
+   assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1));
+   assign eop = (state == STATE_DATA_TX) ? eop_data : eop_ctrl;
+
+   // ////////////////////////////////////////////////////////////////////
+   // set GPIF pins
+
+   //set fifoadr to the appropriate endpoint
+   // {0,0}: EP2, data TX from host
+   // {0,1}: EP4, ctrl TX from host
+   // {1,0}: EP6, data RX to host
+   // {1,1}: EP8, ctrl RX to host
+   assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND),
+                     (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)};
+   //set sloe, slwr, slrd (all active low)
+   //SLOE gets asserted when we want data from the FX2; i.e., TX mode
+   assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)};
+   //"read" and "write" here are from the master's point of view;
+   //so "read" means "transmit" and "write" means "receive"
+   assign slwr = ~{(state == STATE_DATA_RX) | (state == STATE_CTRL_RX)};
+   assign slrd = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX)};
+
+   wire pktend_ctrl, pktend_data;
+   assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX));
+   assign pktend_data = (state == STATE_PKTEND);
+   assign pktend = ~(pktend_ctrl | pktend_data);
+
+   //mux between ctrl/data RX data out based on endpoint selection
+   assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data;
+   // GPIF output data lines, tristate
+   assign gpif_d = sloe ? gpif_d_out : 16'bz;
+   
+   // ////////////////////////////////////////////////////////////////////
+   // TX Data Path
+
+   wire [18:0] 	  tx19_data;
+   wire 	  tx19_src_rdy, tx19_dst_rdy;
+   wire [35:0] 	  tx36_data;
+   wire 	  tx36_src_rdy, tx36_dst_rdy;
+   wire [17:0]    data_tx_int;
+   wire           tx_src_rdy_int, tx_dst_rdy_int;
+   
+   wire [15:0] wr_fifo_space;
+   
+   always @(posedge gpif_clk)
+     if(gpif_rst)
+       data_tx_dst_rdy <= 0;
+     else
+       data_tx_dst_rdy <= wr_fifo_space >= 256;
+
+   fifo_cascade #(.WIDTH(18), .SIZE(10)) wr_fifo
+     (.clk(gpif_clk), .reset(gpif_rst), .clear(0),
+      .datain({eop,sop,gpif_d}), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(/*data_tx_dst_rdy*/), .space(wr_fifo_space),
+      .dataout(data_tx_int), .src_rdy_o(tx_src_rdy_int), .dst_rdy_i(tx_dst_rdy_int), .occupied());
+   
+   fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) wr_fifo_2clk
+     (.wclk(gpif_clk), .datain(data_tx_int), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), .space(),
+      .rclk(fifo_clk), .dataout(tx19_data[17:0]), .src_rdy_o(tx19_src_rdy), .dst_rdy_i(tx19_dst_rdy), .occupied(),
+      .arst(fifo_rst));
+      
+   assign tx19_data[18] = 1'b0;
+
+   // join vita packets which are longer than one frame, drop frame padding
+   wire [18:0] 	  refr_data;
+   wire 	  refr_src_rdy, refr_dst_rdy;
+   wire refr_state;
+   wire refr_eof;
+   wire [15:0] refr_len;
+   
+   packet_reframer tx_packet_reframer 
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .data_i(tx19_data), .src_rdy_i(tx19_src_rdy), .dst_rdy_o(tx19_dst_rdy),
+      .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy),
+      .state(refr_state), .eof_out(refr_eof), .length(refr_len));
+
+   fifo19_to_fifo36 #(.LE(1)) f19_to_f36
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
+      .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy),
+      .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy));
+   
+   fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy),
+      .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i));
+
+   // ////////////////////////////////////////////
+   // RX Data Path
+
+   wire [35:0] 	  rx36_data;
+   wire 	  rx36_src_rdy, rx36_dst_rdy;
+   wire [18:0] 	  rx19_data;
+   wire 	  rx19_src_rdy, rx19_dst_rdy;
+   wire [15:0] rxfifospace;
+
+   //deep 36 bit wide input fifo buffers from DSP
+   fifo_cascade #(.WIDTH(36), .SIZE(8)) rx_fifo36
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o),
+      .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy));
+
+   //convert to fifo19
+   fifo36_to_fifo19 #(.LE(1)) f36_to_f19
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy),
+      .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) );
+
+   wire [18:0] 	data_rx_int;
+   wire 	rx_src_rdy_int, rx_dst_rdy_int;
+   //clock domain crossing fifo for RX data
+   fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk
+     (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(),
+      .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(),
+      .arst(fifo_rst));
+
+   //rd_fifo buffers writes to the 2clock fifo above
+   fifo_cascade #(.WIDTH(19), .SIZE(12)) rd_fifo
+     (.clk(~gpif_clk), .reset(gpif_rst), .clear(0),
+      .datain(data_rx_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace),
+      .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied());
+
+   // ////////////////////////////////////////////////////////////////////
+   // FIFO to Wishbone interface
+
+   wire [18:0] 	  resp_data, resp_int;
+   wire 	  resp_src_rdy, resp_dst_rdy;
+   wire 	  resp_src_rdy_int, resp_dst_rdy_int;
+   
+   wire [18:0] 	  tx_err19_data;
+   wire 	  tx_err19_src_rdy, tx_err19_dst_rdy;
+
+   wire [18:0] 	  ctrl_data;
+   wire 	  ctrl_src_rdy, ctrl_dst_rdy;
+
+   fifo_to_wb fifo_to_wb
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
+      .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy),
+      .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int),
+      .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o), 
+      .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i),
+      .triggers(triggers),
+      .debug0(), .debug1());
+      
+   // ////////////////////////////////////////////////////////////////////
+   // TX CTRL PATH (ctrl commands into Wishbone)
+
+   //how does this use fifo_clk instead of wb_clk
+   //answer: on b100 fifo clk IS wb clk
+   fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk
+     (.wclk(gpif_clk), .datain({1'b0,eop,sop,gpif_d}), 
+      .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(),
+      .rclk(fifo_clk), .dataout(ctrl_data), 
+      .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(),
+      .arst(fifo_rst));
+
+   // ////////////////////////////////////////////////////////////////////
+   // RX CTRL PATH (async packets, ctrl response data)
+   
+   //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk
+   fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o),
+      .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) );
+
+   //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo
+   //how is this clocked on wb_clk?
+   fifo19_mux #(.prio(0)) mux_err_stream
+     (.clk(wb_clk), .reset(wb_rst), .clear(0),
+      .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int),
+      .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy),
+      .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy));
+
+   //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk
+   //the output of this fifo is CTRL DATA PENDING FOR GPIF
+   fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk
+     (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(),
+      .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl), 
+      .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(),
+      .arst(wb_rst));
+
+        
+   // ////////////////////////////////////////////////////////////////////
+   // Debug support, timed and loopback
+   // RX side muxes test data into the same stream
+
+   ///////////////////////////////////////////////////////////////////////
+   // debug lines
+   wire [31:0] 	  debug_rd, debug_wr, debug_split0, debug_split1;
+   
+   wire [35:0] 	timedrx_data, loopbackrx_data, testrx_data;
+   wire [35:0] 	timedtx_data, loopbacktx_data, testtx_data;
+   wire 	timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy,
+		testrx_src_rdy, testrx_dst_rdy;
+   wire 	timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy,
+		testtx_src_rdy, testtx_dst_rdy;
+   wire 	timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int;
+
+   wire [31:0] 	total, crc_err, seq_err, len_err;
+   wire 	sel_testtx = test_ctrl[0];
+   wire 	sel_loopbacktx = test_ctrl[1];
+   wire 	pkt_src_enable = test_ctrl[2];
+   wire 	pkt_sink_enable = test_ctrl[3];
+/*   
+   fifo36_mux rx_test_mux_lvl_1
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy),
+      .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy),
+      .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy));
+   
+   fifo36_mux rx_test_mux_lvl_2
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy),
+      .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o),
+      .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
+   
+   fifo_short #(.WIDTH(36)) loopback_fifo
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx),
+      .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy),
+      .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy));
+   
+   // Crossbar used as a demux for switching TX stream to main DSP or to test logic
+   crossbar36 tx_crossbar_lvl_1
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .cross(sel_testtx),
+      .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy),
+      .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(),  // No 2nd input
+      .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i),
+      .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) );
+   
+   crossbar36 tx_crossbar_lvl_2
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .cross(sel_loopbacktx),
+      .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy),
+      .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(),  // No 2nd input
+      .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy),
+      .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) );
+   
+   // Fixed rate TX traffic consumer
+   fifo_pacer tx_pacer
+     (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable),
+      .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy),
+      .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int),
+      .underrun(tx_underrun), .overrun());
+
+   packet_verifier32 pktver32
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int),
+      .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err));
+
+   // Fixed rate RX traffic generator
+   vita_pkt_gen pktgen
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .len(test_len),
+      .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int));
+
+   fifo_pacer rx_pacer
+     (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable),
+      .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int),
+      .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy),
+      .underrun(), .overrun(rx_overrun));
+*/
+   // ////////////////////////////////////////////
+   //    DEBUG
+   
+   //assign debug0 = { data_tx_dst_rdy, refr_state, gpif_ctl[3:0], refr_eof, slrd, slwr, pktend, fifoadr[1:0], state[3:0], refr_len[15:0]};
+   assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int, 
+                     tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy, 
+                     tx36_src_rdy, tx36_dst_rdy,
+                     gpif_ctl[3:0], fifoadr[1:0], 
+                     wr_fifo_space[15:0]};
+   assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy,
+                     data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy};
+endmodule // slave_fifo
diff --git a/usrp2/top/B100/B100.ucf b/usrp2/top/B100/B100.ucf
index 69fd49971..c86501e72 100644
--- a/usrp2/top/B100/B100.ucf
+++ b/usrp2/top/B100/B100.ucf
@@ -43,17 +43,18 @@ NET "GPIF_D<2>"  LOC = "N9"  ;
 NET "GPIF_D<1>"  LOC = "P9"  ;
 NET "GPIF_D<0>"  LOC = "P8"  ;
 
-NET "GPIF_CTL<3>"  LOC = "N5"  ;
+##NET "GPIF_CTL<3>"  LOC = "N5"  ;
+NET "GPIF_CTL<3>"  LOC = "P12"  ;
 NET "GPIF_CTL<2>"  LOC = "M11"  ;
 NET "GPIF_CTL<1>"  LOC = "M9"  ;
 NET "GPIF_CTL<0>"  LOC = "M7"  ;
 
-NET "GPIF_RDY<3>"  LOC = "N11"  ;
-NET "GPIF_RDY<2>"  LOC = "T10"  ;
-NET "GPIF_RDY<1>"  LOC = "T4"  ;
-NET "GPIF_RDY<0>"  LOC = "R5"  ;
+##NET "GPIF_RDY<3>"  LOC = "N11"  ;
+##NET "GPIF_RDY<2>"  LOC = "T10"  ;
+NET "GPIF_SLWR"  LOC = "T4"  ;
+NET "GPIF_SLRD"  LOC = "R5"  ;
 
-NET "GPIF_CS"  LOC = "P12"  ;
+##NET "GPIF_CS"  LOC = "P12"  ;
 NET "GPIF_SLOE"  LOC = "R11"  ;
 NET "GPIF_PKTEND"  LOC = "P10"  ;
 NET "GPIF_ADR<0>"  LOC = "T11"  ;
diff --git a/usrp2/top/B100/B100.v b/usrp2/top/B100/B100.v
index f2d75c54e..b5691d1c3 100644
--- a/usrp2/top/B100/B100.v
+++ b/usrp2/top/B100/B100.v
@@ -23,8 +23,8 @@ module B100
    output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
 
    // GPIF
-   inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY,
-   input [1:0] GPIF_ADR, output GPIF_CS, output GPIF_SLOE, output GPIF_PKTEND,
+   inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, 
+   output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND,
    input IFCLK,
    
    inout SDA_FPGA, inout SCL_FPGA, // I2C
@@ -156,9 +156,10 @@ module B100
    u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset),
 		     .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
 		     .debug_txd(), .debug_rxd(1'b1),
-		     .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY),
-		     .gpif_misc({GPIF_CS,GPIF_SLOE,GPIF_PKTEND}),
-		     .gpif_clk(IFCLK),
+		     
+		     .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND),
+		     .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD),
+		     .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK),
 
 		     .db_sda(SDA_FPGA), .db_scl(SCL_FPGA),
 		     .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso),
diff --git a/usrp2/top/B100/core_compile b/usrp2/top/B100/core_compile
deleted file mode 100755
index b2ccc8b49..000000000
--- a/usrp2/top/B100/core_compile
+++ /dev/null
@@ -1 +0,0 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v  2>&1   | grep -v timescale | grep -v coregen | grep -v models
diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v
index c883c5ca8..88fec3d99 100644
--- a/usrp2/top/B100/u1plus_core.v
+++ b/usrp2/top/B100/u1plus_core.v
@@ -23,8 +23,9 @@ module u1plus_core
    output debug_txd, input debug_rxd,
    
    // GPIF
-   inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy,
-   output [2:0] gpif_misc, input gpif_clk,
+   inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe,
+   output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr,
+   input gpif_clk,
    
    inout db_sda, inout db_scl,
    output sclk, output [15:0] sen, output mosi, input miso,
@@ -114,16 +115,21 @@ module u1plus_core
    setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx
      (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
       .in(set_data),.out(),.changed(clear_tx));
+      
+   wire 	 run_rx0, run_rx1;
 
-   gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
-   gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d),
-	 .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc),
+   slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
+   slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d),
+	 .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd),
+     .pktend(gpif_pktend), .fifoadr(gpif_fifoadr),
 	 
 	 .wb_clk(wb_clk), .wb_rst(wb_rst),
 	 .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso),
 	 .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we),
 	 .wb_ack_i(m0_ack), .triggers(8'd0),
 	 
+	 .dsp_rx_run(run_rx0 | run_rx1),
+	 
 	 .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx),
 	 .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy),
 	 .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
@@ -131,14 +137,13 @@ module u1plus_core
 	 
 	 .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif),
 
-	 .frames_per_packet(frames_per_packet),
+	 .test_len(test_len), .test_rate(test_rate), .test_ctrl(test_ctrl),
 	 .debug0(debug0), .debug1(debug1));
 
    // /////////////////////////////////////////////////////////////////////////
    // RX ADC Frontend, does IQ Balance, DC Offset, muxing
 
    wire [23:0] 	 adc_i, adc_q;  // 24 bits is total overkill here, but it matches u2/u2p
-   wire 	 run_rx0, run_rx1;
    
    rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
      (.clk(wb_clk),.rst(wb_rst),