docs: Changed Xilinx ISE version from 14.4 to 14.7

2 files changed, 25 insertions, 25 deletions

diff --git a/host/docs/images.rst b/host/docs/images.rst
index 37fbabf4b..f3a987e9c 100644
--- a/host/docs/images.rst
+++ b/host/docs/images.rst
@@ -1,12 +1,12 @@
-========================================================================
+===============================================
 UHD - Firmware and FPGA Image Application Notes
-========================================================================
+===============================================
 
 .. contents:: Table of Contents
 
-------------------------------------------------------------------------
+---------------
 Images Overview
-------------------------------------------------------------------------
+---------------
 Every USRP device must be loaded with special firmware and FPGA images.
 The methods of loading images into the device vary among devices:
 
@@ -19,9 +19,9 @@ The methods of loading images into the device vary among devices:
 * **USRP-X Series:** The user programs an image into on-board storage, which
   then is automatically loaded at runtime. 
 
-------------------------------------------------------------------------
+----------------
 Pre-built Images
-------------------------------------------------------------------------
+----------------
 
 Pre-built images are available for download.
 
@@ -33,9 +33,9 @@ The pre-built images come in two forms:
 * bundled with UHD software in a platform-specific installer
 * stand-alone platform-independent archive files
 
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^
 UHD Images Downloader
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^
 
 The UHD images downloader downloads UHD images compatible with the host code
 and places them in the default images directory.
@@ -44,16 +44,16 @@ By default, it can be found at: **<install-path>/lib/uhd/utils/uhd_images_downlo
 
 By default, it installs images to: **<install-path>/share/uhd/images**
 
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 Platform installers
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 The UNIX-based installers will install the images into **/usr/share/uhd/images**.
 
 The Windows installers will install the images into **C:/Program Files/UHD/share/uhd/images**.
 
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^
 Archive install
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^
 When installing images from an archive, there are two options:
 
 **Option 1:**
@@ -67,18 +67,18 @@ Where **<install-path>** was set by the **CMAKE_INSTALL_PREFIX** at configure-ti
 Unpack the archive anywhere and set the **UHD_IMAGES_PATH** environment variable.
 **UHD_IMAGES_PATH** may contain a list of directories to search for image files.
 
-------------------------------------------------------------------------
+---------------
 Building Images
-------------------------------------------------------------------------
+---------------
 
 The UHD source repository comes with the source code necessary to build
 both firmware and FPGA images for all supported devices.
 
 The build commands for a particular image can be found in **<uhd-repo-path>/images/Makefile**.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^
 Xilinx FPGA builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^
 USRP Xilinx FPGA images are built with two different versions of ISE, depending
 on the device.
 
@@ -86,40 +86,40 @@ The build requires that you have a UNIX-like environment with **Make**.
 Make sure that **xtclsh** from the Xilinx ISE bin directory is in your **$PATH**.
 
 
-**Xilinx ISE 14.4**
+**Xilinx ISE 14.7**
 * USRP X3x0 Series
+* USRP B2x0
 
 See **<uhd-repo-path>/fpga/usrp3/top/**.
 
 **Xilinx ISE 12.2**
 * USRP N2x0
-* USRP B2x0
 * USRP B1x0
 * USRP E1x0
 * USRP2
 
 See **<uhd-repo-path>/fpga/usrp2/top/**.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 ZPU firmware builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 The ZPU GCC compiler is required to build the ZPU firmware images.
 The build requires that you have a UNIX-like environment with **CMake** and **Make**.
 Make sure that **zpu-elf-gcc** is in your **$PATH**.
 
 See **<uhd-repo-path>/firmware/zpu**.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^
 Altera FPGA builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^
 Quartus is required to build the Altera FPGA image for the USRP1.
 Pre-built images can also be found in **<uhd-repo-path>/fpga/usrp1/rbf**.
 
 See **<uhd-repo-path>/fpga/usrp1/toplevel/***.
 
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 FX2 firmware builds
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 The SDCC compiler is required to build the FX2 firmware images.
 The build requires that you have a UNIX-like environment with **CMake** and **Make**.
 
diff --git a/tools/usrp_x3xx_fpga_jtag_programmer.sh b/tools/usrp_x3xx_fpga_jtag_programmer.sh
index df563da14..13aa12d8b 100755
--- a/tools/usrp_x3xx_fpga_jtag_programmer.sh
+++ b/tools/usrp_x3xx_fpga_jtag_programmer.sh
@@ -9,7 +9,7 @@ Usage: impact_jtag_programmer.sh [--help|-h] [--impact-path=<PATH>] --fpga-path=
 
 -h             - Shows this.
 --impact-path  - Path to the iMPACT binary (if not already in PATH).
-                 Often something like /opt/Xilinx/14.4/ISE_DS/ISE/bin/lin64/impact
+                 Often something like /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/impact
 --fpga-path    - Path to the FPGA image.
 --nipcie       - When this option is set, this script will fail if it was unable
                  to stop the NI RIO USRP PCIe driver.