From 0447d38e159daf293fc33a147c4e96a1cde5acfe Mon Sep 17 00:00:00 2001
From: "Matthias P. Braendli" <matthias.braendli@mpb.li>
Date: Sun, 29 Nov 2020 22:24:40 +0100
Subject: Update firmware for new LO

---
 sw/picardy/Makefile        |  8 ++++----
 sw/picardy/src/main.rs     | 20 ++++++++++++++------
 sw/picardy/src/si_clock.rs | 11 +----------
 3 files changed, 19 insertions(+), 20 deletions(-)

(limited to 'sw')

diff --git a/sw/picardy/Makefile b/sw/picardy/Makefile
index 6dc5806..8c5fc79 100644
--- a/sw/picardy/Makefile
+++ b/sw/picardy/Makefile
@@ -1,17 +1,17 @@
 .PHONY: all openocd debug
 
 OPENOCD := openocd
-OPENOCD_CFG := /usr/share/openocd/scripts/target/stm32f1x.cfg
-BIN := target/thumbv7em-none-eabihf/release/picardy
+OPENOCD_OPT := -f interface/stlink-v2.cfg -f target/stm32f1x.cfg
+BIN := target/thumbv7m-none-eabi/debug/picardy
 
 # Build and flash in release mode
 all:
 	cargo build
-	$(OPENOCD) -f $(OPENOCD_CFG) -c "program $(BIN) reset exit"
+	$(OPENOCD) $(OPENOCD_OPT) -c "program $(BIN) reset exit"
 
 # Start a openocd session.
 openocd:
-	$(OPENOCD) -f $(OPENOCD_CFG)
+	$(OPENOCD) $(OPENOCD_OPT)
 
 # Start a gdb session. Works if a valid openocd session is existing.
 debug:
diff --git a/sw/picardy/src/main.rs b/sw/picardy/src/main.rs
index 66c00c5..e6d2469 100644
--- a/sw/picardy/src/main.rs
+++ b/sw/picardy/src/main.rs
@@ -67,6 +67,8 @@ enum FilterShift {
     Custom(u32),
 }
 
+const VHF_BAND_EDGE : u32 = 144_000_000;
+const VHF_LO : u32 = 114_286_000;
 const BFO_LSB : u32 = 4_915_940;
 const BFO_USB : u32 = 4_914_910;
 
@@ -74,7 +76,7 @@ struct State {
     mode : Mode,
     filter_shift : FilterShift,
     bfo_tune_fail : bool,
-    qrg : u32,
+    vhf_qrg : u32,
     tune_speed : TuneSpeed,
 
     transmit : bool,
@@ -89,8 +91,12 @@ impl State {
         }
     }
 
+    fn if_qrg(&self) -> u32 {
+        self.vhf_qrg - VHF_LO
+    }
+
     fn vfo(&self) -> u32 {
-        self.qrg - self.bfo()
+        self.if_qrg() - self.bfo()
     }
 
     fn vfo_incr(&self) -> i32 {
@@ -138,9 +144,11 @@ fn update_disp<T: hd44780_driver::bus::DataBus>(lcd: &mut HD44780<T>, state: &St
     lcd.write_str(&string, delay).unwrap();
 
     string.clear();
+    /* Shorten the QRG to avoid using three digits for nothing */
+    let disp_freq = (state.vhf_qrg as i32) - (VHF_BAND_EDGE as i32);
     match state.mode {
-        Mode::BFO => write!(string, " {:<10}", state.qrg).unwrap(),
-        Mode::VFO => write!(string, ">{:<10}", state.qrg).unwrap(),
+        Mode::BFO => write!(string, " .{:<06} ", disp_freq).unwrap(),
+        Mode::VFO => write!(string, ">.{:<06} ", disp_freq).unwrap(),
     }
 
     match state.tune_speed {
@@ -159,7 +167,7 @@ fn main() -> ! {
         mode : Mode::VFO,
         filter_shift : FilterShift::USB,
         bfo_tune_fail : false,
-        qrg : 28_000_000,
+        vhf_qrg : VHF_BAND_EDGE,
         tune_speed : TuneSpeed::Mid,
         transmit : false,
     };
@@ -293,7 +301,7 @@ fn main() -> ! {
 
             match state.mode {
                 Mode::VFO => {
-                    state.qrg = (state.qrg as i32 + delta * state.vfo_incr()) as u32;
+                    state.vhf_qrg = (state.vhf_qrg as i32 + delta * state.vfo_incr()) as u32;
                 },
                 Mode::BFO => {
                     let new_bfo = (state.bfo() as i32 + delta * state.bfo_incr()) as u32;
diff --git a/sw/picardy/src/si_clock.rs b/sw/picardy/src/si_clock.rs
index b304461..8ebf702 100644
--- a/sw/picardy/src/si_clock.rs
+++ b/sw/picardy/src/si_clock.rs
@@ -101,18 +101,9 @@ impl<I2C, E> SiClock<I2C>
         siclock.init(si5351::CrystalLoad::_10).unwrap();
 
         // See freqplan.py for Si5351 frequency plan
-        // CLK1 = 116MHz
+        // CLK1 unused
         siclock.setup_pll_int(si5351::PLL::A, 32).unwrap();
 
-        {
-            let clk1 = 116_000_000;
-            let (a, b, c) = clock_settings_for_pll(clk1, PLL_A_MULT * REF_CLOCK);
-            siclock.setup_multisynth(si5351::Multisynth::MS1, a, b, c, si5351::OutputDivider::Div1).unwrap();
-            siclock.select_clock_pll(si5351::ClockOutput::Clk1, si5351::PLL::A);
-            siclock.set_clock_enabled(si5351::ClockOutput::Clk1, true);
-            siclock.flush_clock_control(si5351::ClockOutput::Clk1).unwrap();
-        }
-
         set_bfo(&mut siclock, bfo).unwrap();
 
         siclock.reset_pll(si5351::PLL::A).unwrap();
-- 
cgit v1.2.3