From cd3d884aabc50fa577d0914bbd2cc8299dd7ae11 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Wed, 8 Jul 2020 11:32:44 +0200 Subject: Add a few readme embellishments --- README.md | 67 ++++++++++++++++++++++++++++++++------------------------------- 1 file changed, 34 insertions(+), 33 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index 6e9a6b6..29946d9 100644 --- a/README.md +++ b/README.md @@ -35,38 +35,38 @@ PCB Assembly Plan ================= 1. DCDC converter for 8V and LDOs - * Check output voltages - * Check drop under load + * Check output voltages + * Check drop under load 2. STM32F103C8T6 - * Programming - * Sidetone low-pass - * Probably need to do a UI proto already + * Programming + * Sidetone low-pass + * Probably need to do a UI proto already 3. Si5153 - * Check I2C works + * Check I2C works 4. 8V and 5V relay - * Check switching with microcontroller and validate resistors + * Check switching with microcontroller and validate resistors 5. Baseband - 1. Crystal filter shape - 2. RX and TX filter shape - 3. Receive path: IF mixer, crystal filter relay, IF AGC, BFO mixer, AGC measure, AF amp, SPKR - * Verify LO levels into SA602A: at least 200mVpp - 4. Transmit path: Mic amp + * Crystal filter shape + * RX and TX filter shape + * Receive path: IF mixer, crystal filter relay, IF AGC, BFO mixer, AGC measure, AF amp, SPKR + * Verify LO levels into SA602A: at least 200mVpp + * Transmit path: Mic amp 6. Anglian - 1. LO filter shape - 2. LO amp. Mixer needs +7dBm - 3. All passives - * Verify correct voltages for amplifiers - * Verify PIN currents (Between 20mA and 60mA, below 0.8V) - * Verify filter shapes - 4. IF amplifiers, both RX and TX - 5. VHF amplifiers - 6. VHF bandpass filter - 7. Mixer + * LO filter shape + * LO amp. Mixer needs +7dBm + * All passives + * Verify correct voltages for amplifiers + * Verify PIN currents (Between 20mA and 60mA, below 0.8V) + * Verify filter shapes + * IF amplifiers, both RX and TX + * VHF amplifiers + * VHF bandpass filter + * Mixer 7. External switching relay @@ -74,15 +74,16 @@ PCB Assembly Plan Additional remarks ================== -* Very good [explanations](https://groups.io/g/BITX20/topic/si5351a_facts_and_myths/5430607) about DDS vs DPLL from Hans Summers - -* Si5153 test before PCB fab: - * It seems the desired frequency plan can be achieved: - * clk0: LO1 = 28 - 4.9152 + VFO, i.e. from 23 to 25 - * clk1: VHF-LO = 144 + 28 and 144 - 28, i.e. 116 MHz - * clk2: BFO = 4.91521 - * See `freqplan.py` - * If not, generate LO1 and BFO with Si5153, and connect an external LO to the VHF LO u.FL - * No 116MHz crystals on mouser, but 114.285MHz are available, HF bandpass filters recalculated. - * Other option is using another configurable reference +Very good [explanations](https://groups.io/g/BITX20/topic/si5351a_facts_and_myths/5430607) about DDS vs DPLL from Hans Summers + +Si5153 test before PCB fab: + +* It seems the desired frequency plan can be achieved: + * clk0: LO1 = 28 - 4.9152 + VFO, i.e. from 23 to 25 + * clk1: VHF-LO = 144 + 28 and 144 - 28, i.e. 116 MHz + * clk2: BFO = 4.91521 + * See `freqplan.py` +* If not, generate LO1 and BFO with Si5153, and connect an external LO to the VHF LO u.FL + * No 116MHz crystals on mouser, but 114.285MHz are available, HF bandpass filters recalculated. + * Other option is using another configurable reference -- cgit v1.2.3