From a60909ae99e5bfb24497d39119984c7dcdeb1202 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Wed, 4 Oct 2017 13:12:06 +0200 Subject: Add section about resource usage --- scenarios.tex | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'scenarios.tex') diff --git a/scenarios.tex b/scenarios.tex index ba55533..b28e3b5 100644 --- a/scenarios.tex +++ b/scenarios.tex @@ -146,6 +146,7 @@ it in steps of $3$dB or smaller while measuring the output signal, until the correct power is reached. \subsubsection{Other Hardware} +\label{otherhardware} ODR-DabMod supports other radio interfaces using SoapySDR or through standard output, or via a fifo -- the latter must be created prior to runtime with the \texttt{mkfifo} command. Due to limitations in the UHD driver library, \texttt{/dev/stdout} will only @@ -165,7 +166,7 @@ chosen inside the valid range for the device being used. This range can be shown by calling \texttt{SoapySDRUtil --probe}. ODR-DabMod has been tested working with HackRF on i386 and -x86 architectures.\footnote{HackRF has not been tested to any degree of success +x86\_64 architectures.\footnote{HackRF has not been tested to any degree of success with ARM-based computers at this time as they are not (yet) capable of resampling to the required higher rates as the process is highly CPU intensive.} -- cgit v1.2.3