general { ; the DAB Transmission mode (values 1-4 accepted) dabmode 1 ; the number of ETI frames to generate (set to 0 to get an unlimited number) nbframes 0 ; The statsserver for extracting statistics statsserverport 12720 syslog true writescca false tist true new_fig_carousel true } remotecontrol { ; enable the remote control server telnetport 12721 } ; Some ensemble parameters ensemble { id 0x4fff ; Extended Country Code (decimal) ecc 225 local-time-offset auto international-table 1 label "TuxMux" shortlabel "Tux" ; Announcement settings for FIG0/19 announcements { alarm { cluster 0xFF flags { Alarm true } subchannel sub-fb } test_announcement { cluster 1 flags { Traffic true } subchannel sub-fb } } } services { srv-fb { label "FB" shortlabel "FB" pty 0 language 0 id 0x4060 ; also supports id announcements { Traffic true Alarm true clusters "1,255" } } srv-label { label "label" id 0x4040 ; also supports id announcements { Traffic true Alarm true clusters "1,255" } } } ; The subchannels are defined in the corresponding section. ; supported types are : audio, bridge, data, enhancedpacket, ; dabplus, dmb, packet, test subchannels { sub-fb { type dabplus ; use ZeroMQ: ;inputfile "tcp://*:9001" inputfile "./stream-0.msc" zmq-buffer 40 zmq-prebuffering 20 bitrate 128 id 24 protection 3 encryption 0 secret-key "keys/mux.sec" public-key "keys/mux.pub" encoder-key "keys/encoder1.pub" } sub-label { type audio inputfile "/home/bram/dab/mmbtools-aux/fip-j-ok.mp2" ;inputfile "tcp://*:9002" zmq-buffer 40 zmq-prebuffering 20 bitrate 128 id 4 protection 3 } ; sub-data { ; type data ; inputfile "udp://:9003" ; bitrate 16 ; id 5 ; protection 3 ; } } ; For now, each component links one service to one subchannel components { ; the component unique identifiers are not used anywhere, but ; are useful to disambiguate different components. comp-fb { label "FBcomp" shortlabel "FBcomp" service srv-fb subchannel sub-fb figtype 0x2 } comp-label { service srv-label subchannel sub-label } } ; A list of outputs, in the format ; unique-id "uri" outputs { ;stdout "fifo:///dev/stdout?type=raw" ;thefile "file://./zmq-simul.eti?type=raw" ;zmq "zmq+tcp://*:9100" ; This throttles muxing down to nominal rate throttle "simul://" ;net_udp "udp://shack.local:31000" net_tcp "tcp://0.0.0.0:31000" edi { fec 0 chunk_len 200 destinations { multicast { destination "239.20.64.1" ;source "192.168.2.10" source "192.168.0.100" sourceport 52321 ttl 1 } ;unicast { ;destination "192.168.2.2" ;} } port 52002 ; EDI uses the UDP protocol ; Enable the PFT subsystem. If false, AFPackets are sent. enable_pft true ; Save the packets sent over ethernet to the file ./edi.debug dump false ; show more debugging info verbose false ; optional: what kind of alignment to do in the tagpacket tagpacket_alignment 16 } }