#include <Arduino.h>
#include <RadioLib.h>
#include <Wire.h>
#include <SparkFun_u-blox_GNSS_Arduino_Library.h>
#include <SD.h>

File myFile;

constexpr int SD_CS = 17;

// SX1278 has the following connections:
// NSS pin:   PD14 (Arduino 10)
// DIO0 pin:  PF3 (Arduino 8)
// RESET pin: PF15 (Arduino 9)
RFM96 radio = new Module(10, 8, 9);
HardwareSerial SerialGNSS(PD6, PD5);
SFE_UBLOX_GNSS gnss;

long lastGnssPoll = 0;
long lastPositionReport = 0;
constexpr size_t POSITION_REPORT_LEN = 32;
char positionReport[POSITION_REPORT_LEN+1];

static char letterize(int x) {
    return (char) x + 65;
}
static char* get_mh(double lat, double lon, int size) {
    static char locator[11];
    double LON_F[]={20,2.0,0.083333,0.008333,0.0003472083333333333};
    double LAT_F[]={10,1.0,0.0416665,0.004166,0.0001735833333333333};
    int i;
    lon += 180;
    lat += 90;

    if (size <= 0 || size > 10) size = 6;
    size/=2; size*=2;

    for (i = 0; i < size/2; i++){
        if (i % 2 == 1) {
            locator[i*2] = (char) (lon/LON_F[i] + '0');
            locator[i*2+1] = (char) (lat/LAT_F[i] + '0');
        } else {
            locator[i*2] = letterize((int) (lon/LON_F[i]));
            locator[i*2+1] = letterize((int) (lat/LAT_F[i]));
        }
        lon = fmod(lon, LON_F[i]);
        lat = fmod(lat, LAT_F[i]);
    }
    locator[i*2]=0;
    return locator;
}

void setup() {
    Serial.begin(9600);
    pinMode(LED_BUILTIN, OUTPUT);

    pinMode(SD_CS, OUTPUT);

    if (!SD.begin(SD_CS)) {
        Serial.println("SD init failed!");
        return;
    }


    Wire.begin();

    SerialGNSS.begin(9600);
    if (!gnss.begin(SerialGNSS)) {
        while (true) {
            Serial.println(F("Check GNSS"));
            delay(4000);
        }
    }

    //gnss.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial

    Serial.print(F("Version: "));
    byte versionHigh = gnss.getProtocolVersionHigh();
    Serial.print(versionHigh);
    Serial.print(".");
    byte versionLow = gnss.getProtocolVersionLow();
    Serial.println(versionLow);

    Serial.print(F("[RFM] Init "));
    int state = radio.begin(433.900);
    if (state == RADIOLIB_ERR_NONE) {
        Serial.println(F("success!"));
    } else {
        Serial.print(F("failed, code "));
        Serial.println(state);
        while (true);
    }

    if (radio.setBandwidth(125.0) == RADIOLIB_ERR_INVALID_BANDWIDTH) {
        Serial.println(F("Selected bandwidth is invalid for this module!"));
        while (true);
    }

    if (radio.setSpreadingFactor(12) == RADIOLIB_ERR_INVALID_SPREADING_FACTOR) {
        Serial.println(F("Selected spreading factor is invalid for this module!"));
        while (true);
    }

    if (radio.setCodingRate(5) == RADIOLIB_ERR_INVALID_CODING_RATE) {
        Serial.println(F("Selected coding rate is invalid for this module!"));
        while (true);
    }

    // NOTE: value 0x34 is reserved for LoRaWAN networks and should not be used
    if (radio.setSyncWord(0x14) != RADIOLIB_ERR_NONE) {
        Serial.println(F("Unable to set sync word!"));
        while (true);
    }

    if (radio.setOutputPower(16) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
        Serial.println(F("Selected output power is invalid for this module!"));
        while (true);
    }

    if (radio.setPreambleLength(8) == RADIOLIB_ERR_INVALID_PREAMBLE_LENGTH) {
        Serial.println(F("Selected preamble length is invalid for this module!"));
        while (true);
    }

    // radio.setRfSwitchPins(4, 5);
}

void loop()
{
    const auto now = millis();
    if (now - lastGnssPoll > 1000) {
        lastGnssPoll = now;

        long latitude = gnss.getLatitude();
        Serial.print(F("Lat: "));
        Serial.print(latitude);

        long longitude = gnss.getLongitude();
        Serial.print(F(" Long: "));
        Serial.print(longitude);

        char *locator = get_mh((double)latitude/1e7, (double)longitude/1e7, 10);
        Serial.print(F(" Loc: "));
        Serial.print(locator);

        long altitude = gnss.getAltitude();
        Serial.print(F(" Alt: "));
        Serial.print(altitude);
        Serial.print(F(" (mm)"));

        long speed = gnss.getGroundSpeed();
        Serial.print(F(" Speed: "));
        Serial.print(speed);
        Serial.print(F(" (mm/s)"));

        /*
           long heading = gnss.getHeading();
           Serial.print(F(" Heading: "));
           Serial.print(heading);
           Serial.print(F(" (degrees * 10^-5)"));
         */

        byte SIV = gnss.getSIV();
        Serial.print(F(" SIV: "));
        Serial.print(SIV);

        Serial.print(F(" TX in: "));
        constexpr long TX_INTERVAL = 15000;
        Serial.print(TX_INTERVAL - (now - lastPositionReport));

        Serial.println();

        if (now - lastPositionReport > TX_INTERVAL) {
            lastPositionReport = now;

            digitalWrite(LED_BUILTIN, HIGH);

            ssize_t len = snprintf(positionReport, POSITION_REPORT_LEN, "HB9EGM %s", locator);

            Serial.print(F("TX: "));
            Serial.print(positionReport);

            int state = radio.transmit(positionReport, len);

            if (state == RADIOLIB_ERR_NONE) {
                Serial.print(F(" RFM OK Datarate: "));
                Serial.print(radio.getDataRate());
                Serial.println(F(" bps"));

            }
            else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
                Serial.println(F(" too long!"));

            }
            else if (state == RADIOLIB_ERR_TX_TIMEOUT) {
                Serial.println(F(" timeout!"));

            }
            else {
                Serial.print(F(" failed, code "));
                Serial.println(state);
            }

            digitalWrite(LED_BUILTIN, LOW);
        }
    }
}