/**
 * @author  Tilen Majerle
 * @email   tilen@majerle.eu
 * @website http://stm32f4-discovery.com
 * @link    http://stm32f4-discovery.com/2014/05/library-12-onewire-library-for-stm43f4xx/
 * @version v2.1
 * @ide     Keil uVision
 * @license GNU GPL v3
 * @brief   Onewire library for STM32F4 devices
 *	
@verbatim
   ----------------------------------------------------------------------
    Copyright (C) Tilen Majerle, 2015
    
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    any later version.
     
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
   ----------------------------------------------------------------------
@endverbatim
 */
#ifndef TM_ONEWIRE_H
#define TM_ONEWIRE_H 210

/* C++ detection */
#ifdef __cplusplus
extern C {
#endif

/**
 * @addtogroup TM_STM32F4xx_Libraries
 * @{
 */

/**
 * @defgroup TM_ONEWIRE
 * @brief    Onewire library for STM32F4 devices - http://stm32f4-discovery.com/2014/05/library-12-onewire-library-for-stm43f4xx/
 * @{
 *
 * As of version 2.0 you can now use more than just one one-wire "port" on STM32F4. This allows you to group devices to separate ports.
 * 
 * Because if you have a loot devices on one port, if one device fail, everything is failed. You can prevent this by use more than just one port.
 *
 * To set your port and pin for OneWire protocol, you can do this when calling @ref TM_OneWire_Init function.
 *
 * \par Changelog
 *
@verbatim
 Version 2.1
  - March 10, 2015
  - Added support for new GPIO library 

 Version 2.0
  - January 04, 2015
  - New OneWire system
  - With support for multiple OneWire ports to separate group of devices

 Version 1.1
  - December 06, 2014
  - Added 8-bit CRC calculation for 1-Wire devices, algorithm from Dallas
 
 Version 1.0
  - First release
@endverbatim
 *
 * \par Dependencies
 *
@verbatim
 - STM32F4xx
 - STM32F4xx RCC
 - STM32F4xx GPIO
 - TM GPIO
@endverbatim
 */
#include "stm32f4xx.h"
#include "stm32f4xx_rcc.h"
#include "stm32f4xx_gpio.h"

/**
 * @defgroup TM_ONEWIRE_Macros
 * @brief    Library defines
 * @{
 */

/* Pin settings */

#define ONEWIRE_LOW(structure)			TM_GPIO_ResetBits((structure)->GPIOx, (structure)->GPIO_Pin)
#define ONEWIRE_HIGH(structure)			TM_GPIO_SetBits((structure)->GPIOx, (structure)->GPIO_Pin)
#define ONEWIRE_INPUT(structure)		TM_GPIO_SetPinAsInput(structure->GPIOx, (structure)->GPIO_Pin)
#define ONEWIRE_OUTPUT(structure)		TM_GPIO_SetPinAsOutput(structure->GPIOx, (structure)->GPIO_Pin)

/* OneWire commands */
#define ONEWIRE_CMD_RSCRATCHPAD			0xBE
#define ONEWIRE_CMD_WSCRATCHPAD			0x4E
#define ONEWIRE_CMD_CPYSCRATCHPAD		0x48
#define ONEWIRE_CMD_RECEEPROM			0xB8
#define ONEWIRE_CMD_RPWRSUPPLY			0xB4
#define ONEWIRE_CMD_SEARCHROM			0xF0
#define ONEWIRE_CMD_READROM				0x33
#define ONEWIRE_CMD_MATCHROM			0x55
#define ONEWIRE_CMD_SKIPROM				0xCC

/**
 * @}
 */
 
/**
 * @defgroup TM_ONEWIRE_Typedefs
 * @brief    Library Typedefs
 * @{
 */

/**
 * @brief  OneWire working struct
 * @note   Except ROM_NO member, everything is fully private and should not be touched by user
 */
typedef struct {
	GPIO_TypeDef* GPIOx;           /*!< GPIOx port to be used for I/O functions */
	uint16_t GPIO_Pin;             /*!< GPIO Pin to be used for I/O functions */
	uint8_t LastDiscrepancy;       /*!< Search private */
	uint8_t LastFamilyDiscrepancy; /*!< Search private */
	uint8_t LastDeviceFlag;        /*!< Search private */
	uint8_t ROM_NO[8];             /*!< 8-bytes address of last search device */
} TM_OneWire_t;

/**
 * @}
 */

/**
 * @defgroup TM_ONEWIRE_Functions
 * @brief    Library Functions
 * @{
 */

/**
 * @brief  Initializes OneWire bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t empty working onewire structure
 * @param  *Pointer to GPIO port used for onewire channel
 * @param  GPIO_Pin: GPIO Pin on specific GPIOx to be used for onewire channel
 * @retval None
 */
void TM_OneWire_Init(TM_OneWire_t* OneWireStruct, GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);

/**
 * @brief  Resets OneWire bus
 * 
 * @note   Sends reset command for OneWire
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure
 * @retval None
 */
uint8_t TM_OneWire_Reset(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Reads byte from one wire bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure
 * @retval Byte from read operation
 */
uint8_t TM_OneWire_ReadByte(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Writes byte to bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure
 * @param  byte: 8-bit value to write over OneWire protocol
 * @retval None
 */
void TM_OneWire_WriteByte(TM_OneWire_t* OneWireStruct, uint8_t byte);

/**
 * @brief  Writes single bit to onewire bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure
 * @param  bit: Bit value to send, 1 or 0
 * @retval None
 */
void TM_OneWire_WriteBit(TM_OneWire_t* OneWireStruct, uint8_t bit);

/**
 * @brief  Reads single bit from one wire bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure
 * @retval Bit value:
 *            - 0: Bit is low (zero)
 *            - > 0: Bit is high (one)
 */
uint8_t TM_OneWire_ReadBit(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Searches for OneWire devices on specific Onewire port
 * @note   Not meant for public use. Use @ref TM_OneWire_First and @ref TM_OneWire_Next for this.
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure where to search
 * @param  Device status:
 *            - 0: No devices detected
 *            - > 0: Device detected
 */
uint8_t TM_OneWire_Search(TM_OneWire_t* OneWireStruct, uint8_t command);

/**
 * @brief  Resets search states
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire where to reset search values
 * @retval None
 */
void TM_OneWire_ResetSearch(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Starts search, reset states first
 * @note   When you want to search for ALL devices on one onewire port, you should first use this function.
@verbatim
/...Initialization before
status = TM_OneWire_First(&OneWireStruct);
while (status) {
	//Save ROM number from device
	TM_OneWire_GetFullROM(ROM_Array_Pointer);
	//Check for new device
	status = TM_OneWire_Next(&OneWireStruct);
}
@endverbatim
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire where to reset search values
 * @param  Device status:
 *            - 0: No devices detected
 *            - > 0: Device detected
 */
uint8_t TM_OneWire_First(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Reads next device
 * @note   Use @ref TM_OneWire_First to start searching
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire
 * @param  Device status:
 *            - 0: No devices detected any more
 *            - > 0: New device detected
 */
uint8_t TM_OneWire_Next(TM_OneWire_t* OneWireStruct);

/**
 * @brief  Gets ROM number from device from search
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire
 * @param  index: Because each device has 8-bytes long ROm address, you have to call this 8 times, to get ROM bytes from 0 to 7
 * @reetval ROM byte for index (0 to 7) at current found device
 */
uint8_t TM_OneWire_GetROM(TM_OneWire_t* OneWireStruct, uint8_t index);

/**
 * @brief  Gets all 8 bytes ROM value from device from search
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire
 * @param  *firstIndex: Pointer to first location for first byte, other bytes are automatically incremented
 * @retval None
 */
void TM_OneWire_GetFullROM(TM_OneWire_t* OneWireStruct, uint8_t *firstIndex);

/**
 * @brief  Selects specific slave on bus
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire
 * @param  *addr: Pointer to first location of 8-bytes long ROM address
 * @retval None
 */
void TM_OneWire_Select(TM_OneWire_t* OneWireStruct, uint8_t* addr);

/**
 * @brief  Selects specific slave on bus with pointer address
 * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire
 * @param  *ROM: Pointer to first byte of ROM address
 * @retval None
 */
void TM_OneWire_SelectWithPointer(TM_OneWire_t* OneWireStruct, uint8_t* ROM);

/**
 * @brief  Calculates 8-bit CRC for 1-wire devices
 * @param  *addr: Pointer to 8-bit array of data to calculate CRC
 * @param  len: Number of bytes to check
 *
 * @retval Calculated CRC from input data
 */
uint8_t TM_OneWire_CRC8(uint8_t* addr, uint8_t len);

/**
 * @}
 */
 
/**
 * @}
 */
 
/**
 * @}
 */

int TM_OneWire_Verify(TM_OneWire_t*);
void TM_OneWire_TargetSetup(TM_OneWire_t*, uint8_t);
void TM_OneWire_FamilySkipSetup(TM_OneWire_t*);
 
/* C++ detection */
#ifdef __cplusplus
}
#endif

#endif