/* * The MIT License (MIT) * * Copyright (c) 2015 Matthias P. Braendli * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _FSM_H_ #define _FSM_H_ // List of all states the FSM of the relay can be in enum fsm_state_e { FSM_OISIF = 0, // Idle FSM_OPEN1, // 1750 Hz received and squelch open FSM_OPEN2, // Squelch closed FSM_LETTRE, // Transmit single status letter FSM_ECOUTE, // Repeater open, waiting for QSO FSM_ATTENTE, // No QSO after a short while FSM_QSO, // QSO ongoing FSM_ANTI_BAVARD, // QSO too long, cut transmission FSM_BLOQUE, // Backoff after ANTI_BAVARD FSM_TEXTE_73, // Transmit 73 after QSO FSM_TEXTE_HB9G, // Transmit HB9G after QSO FSM_TEXTE_LONG, // Transmit either HB9G JN36BK or HB9G 1628M after QSO FSM_BALISE_LONGUE, // Full-length 2-hour beacon FSM_BALISE_SPECIALE, // 2-hour beacon when in QRP or with high power return mode FSM_BALISE_COURTE, // Short intermittent beacon _NUM_FSM_STATES // Dummy state to count the number of states }; typedef enum fsm_state_e fsm_state_t; // All signals that the FSM can read, most of them are actually booleans struct fsm_input_signals_t { /* Signals coming from repeater electronics */ int sq; // Squelch detection int discrim_u; // FM discriminator says RX is too high in frequency int carrier; // RX carrier detection int qrp; // The relay is currently running with low power int start_tm; // 2-hour pulse float temp; // temperature in degrees C float humidity; // relative humidity, range [0-100] % int wind_generator_ok; // false if the generator is folded out of the wind int discrim_d; // FM discriminator says RX is too low in frequency int tone_1750; // Detect 1750Hz tone int sstv_mode; // The 1750Hz filter is disabled, permitting SSTV usage /* Signals coming from CW generator */ int cw_done; // The CW generator has finished transmitting the message /* Signal coming from the standing wave ratio meter */ int swr_high; // We see a lot of return power }; // All signals the FSM has to control struct fsm_output_signals_t { /* Signals to the repeater electronics */ int qrp; // Place the repeater in QRP mode int tx_on; // Enable TX circuitry int modulation; // Enable repeater RX to TX modulation /* Signals to the CW generator */ const char* cw_msg; // The message to transmit int cw_frequency; // What audio frequency for the CW message int cw_speed; // CW speed int cw_trigger; // Set to true to trigger a transmission }; // Initialise local structures void fsm_init(); // Call the FSM once and update the internal state void fsm_update(); // Setter for inputs void fsm_update_inputs(struct fsm_input_signals_t* inputs); // Getter for outputs void fsm_get_outputs(struct fsm_output_signals_t* out); #endif // _FSM_H_