diff options
Diffstat (limited to 'src/bsp/system_stm32f4xx.c')
| -rw-r--r-- | src/bsp/system_stm32f4xx.c | 584 |
1 files changed, 584 insertions, 0 deletions
diff --git a/src/bsp/system_stm32f4xx.c b/src/bsp/system_stm32f4xx.c new file mode 100644 index 0000000..8695313 --- /dev/null +++ b/src/bsp/system_stm32f4xx.c @@ -0,0 +1,584 @@ +/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 10-July-2012
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ * This file contains the system clock configuration for STM32F4xx devices,
+ * and is generated by the clock configuration tool
+ * stm32f4xx_Clock_Configuration_V1.0.1.xls
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+ * and Divider factors, AHB/APBx prescalers and Flash settings),
+ * depending on the configuration made in the clock xls tool.
+ * This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (16 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f4xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. If the system clock source selected by user fails to startup, the SystemInit()
+ * function will do nothing and HSI still used as system clock source. User can
+ * add some code to deal with this issue inside the SetSysClock() function.
+ *
+ * 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define
+ * in "stm32f4xx.h" file. When HSE is used as system clock source, directly or
+ * through PLL, and you are using different crystal you have to adapt the HSE
+ * value to your own configuration.
+ *
+ * 5. This file configures the system clock as follows:
+ *=============================================================================
+ *=============================================================================
+ * Supported STM32F4xx device revision | Rev A
+ *-----------------------------------------------------------------------------
+ * System Clock source | PLL (HSE)
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 168000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 168000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB1 Prescaler | 4
+ *-----------------------------------------------------------------------------
+ * APB2 Prescaler | 2
+ *-----------------------------------------------------------------------------
+ * HSE Frequency(Hz) | 8000000
+ *-----------------------------------------------------------------------------
+ * PLL_M | 8
+ *-----------------------------------------------------------------------------
+ * PLL_N | 336
+ *-----------------------------------------------------------------------------
+ * PLL_P | 2
+ *-----------------------------------------------------------------------------
+ * PLL_Q | 7
+ *-----------------------------------------------------------------------------
+ * PLLI2S_N | 352
+ *-----------------------------------------------------------------------------
+ * PLLI2S_R | 2
+ *-----------------------------------------------------------------------------
+ * I2S input clock(Hz) | 176000000
+ * |
+ * To achieve the following I2S config: |
+ * - Master clock output (MCKO): OFF |
+ * - Frame wide : 16bit |
+ * - Error % : 0,0000 |
+ * - Prescaler Odd factor (ODD): 1 |
+ * - Linear prescaler (DIV) : 14 |
+ *-----------------------------------------------------------------------------
+ * VDD(V) | 3,3
+ *-----------------------------------------------------------------------------
+ * Main regulator output voltage | Scale1 mode
+ *-----------------------------------------------------------------------------
+ * Flash Latency(WS) | 5
+ *-----------------------------------------------------------------------------
+ * Prefetch Buffer | OFF
+ *-----------------------------------------------------------------------------
+ * Instruction cache | ON
+ *-----------------------------------------------------------------------------
+ * Data cache | ON
+ *-----------------------------------------------------------------------------
+ * Require 48MHz for USB OTG FS, | Enabled
+ * SDIO and RNG clock |
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f4xx.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM mounted
+ on STM324xG_EVAL board as data memory */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/************************* PLL Parameters *************************************/
+/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
+#define PLL_M 8
+#define PLL_N 336
+
+/* SYSCLK = PLL_VCO / PLL_P */
+#define PLL_P 2
+
+/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */
+#define PLL_Q 7
+
+/* PLLI2S_VCO = (HSE_VALUE Or HSI_VALUE / PLL_M) * PLLI2S_N
+ I2SCLK = PLLI2S_VCO / PLLI2S_R */
+#define START_I2SCLOCK 0
+#define PLLI2S_N 352
+#define PLLI2S_R 2
+
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+
+uint32_t SystemCoreClock = 168000000;
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+static void SetSysClock(void);
+#ifdef DATA_IN_ExtSRAM
+static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemFrequency variable.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+#endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM */
+
+ /* Configure the System clock source, PLL Multiplier and Divider factors,
+ AHB/APBx prescalers and Flash settings ----------------------------------*/
+ SetSysClock();
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @Note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+static void SetSysClock(void)
+{
+ /******************************************************************************/
+ /* PLL (clocked by HSE) used as System clock source */
+ /******************************************************************************/
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */
+ RCC->APB1ENR |= RCC_APB1ENR_PWREN;
+ PWR->CR |= PWR_CR_VOS;
+
+ /* HCLK = SYSCLK / 1*/
+ RCC->CFGR |= RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK / 2*/
+ RCC->CFGR |= RCC_CFGR_PPRE2_DIV2;
+
+ /* PCLK1 = HCLK / 4*/
+ RCC->CFGR |= RCC_CFGR_PPRE1_DIV4;
+
+ /* Configure the main PLL */
+ RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) |
+ (RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24);
+
+ /* Enable the main PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till the main PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Configure Flash prefetch, Instruction cache, Data cache and wait state */
+ FLASH->ACR = FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS;
+
+ /* Select the main PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= RCC_CFGR_SW_PLL;
+
+ /* Wait till the main PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL);
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+
+
+ /******************************************************************************/
+ /* I2S clock configuration */
+ /******************************************************************************/
+
+#if START_I2SCLOCK
+ /* PLLI2S clock used as I2S clock source */
+ RCC->CFGR &= ~RCC_CFGR_I2SSRC;
+
+ /* Configure PLLI2S */
+ RCC->PLLI2SCFGR = (PLLI2S_N << 6) | (PLLI2S_R << 28);
+
+ /* Enable PLLI2S */
+ RCC->CR |= ((uint32_t)RCC_CR_PLLI2SON);
+
+ /* Wait till PLLI2S is ready */
+ while((RCC->CR & RCC_CR_PLLI2SRDY) == 0)
+ {
+ }
+#endif
+}
+
+/**
+ * @brief Setup the external memory controller. Called in startup_stm32f4xx.s
+ * before jump to __main
+ * @param None
+ * @retval None
+ */
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external SRAM mounted on STM324xG_EVAL board
+ * This SRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ /*-- GPIOs Configuration -----------------------------------------------------*/
+ /*
+ +-------------------+--------------------+------------------+------------------+
+ + SRAM pins assignment +
+ +-------------------+--------------------+------------------+------------------+
+ | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
+ | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
+ | PD4 <-> FSMC_NOE | PE3 <-> FSMC_A19 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
+ | PD5 <-> FSMC_NWE | PE4 <-> FSMC_A20 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
+ | PD8 <-> FSMC_D13 | PE7 <-> FSMC_D4 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
+ | PD9 <-> FSMC_D14 | PE8 <-> FSMC_D5 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
+ | PD10 <-> FSMC_D15 | PE9 <-> FSMC_D6 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 |
+ | PD11 <-> FSMC_A16 | PE10 <-> FSMC_D7 | PF13 <-> FSMC_A7 |------------------+
+ | PD12 <-> FSMC_A17 | PE11 <-> FSMC_D8 | PF14 <-> FSMC_A8 |
+ | PD13 <-> FSMC_A18 | PE12 <-> FSMC_D9 | PF15 <-> FSMC_A9 |
+ | PD14 <-> FSMC_D0 | PE13 <-> FSMC_D10 |------------------+
+ | PD15 <-> FSMC_D1 | PE14 <-> FSMC_D11 |
+ | | PE15 <-> FSMC_D12 |
+ +-------------------+--------------------+
+ */
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR = 0x00000078;
+
+ /* Connect PDx pins to FSMC Alternate function */
+ GPIOD->AFR[0] = 0x00cc00cc;
+ GPIOD->AFR[1] = 0xcc0ccccc;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xaaaa0a0a;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xffff0f0f;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FSMC Alternate function */
+ GPIOE->AFR[0] = 0xc00cc0cc;
+ GPIOE->AFR[1] = 0xcccccccc;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xaaaa828a;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xffffc3cf;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FSMC Alternate function */
+ GPIOF->AFR[0] = 0x00cccccc;
+ GPIOF->AFR[1] = 0xcccc0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xaa000aaa;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xff000fff;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FSMC Alternate function */
+ GPIOG->AFR[0] = 0x00cccccc;
+ GPIOG->AFR[1] = 0x000000c0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00080aaa;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000c0fff;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+ /*-- FSMC Configuration ------------------------------------------------------*/
+ /* Enable the FSMC interface clock */
+ RCC->AHB3ENR = 0x00000001;
+
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001015;
+ FSMC_Bank1->BTCR[3] = 0x00010603;
+ FSMC_Bank1E->BWTR[2] = 0x0fffffff;
+ /*
+ Bank1_SRAM2 is configured as follow:
+
+ p.FSMC_AddressSetupTime = 3;
+ p.FSMC_AddressHoldTime = 0;
+ p.FSMC_DataSetupTime = 6;
+ p.FSMC_BusTurnAroundDuration = 1;
+ p.FSMC_CLKDivision = 0;
+ p.FSMC_DataLatency = 0;
+ p.FSMC_AccessMode = FSMC_AccessMode_A;
+
+ FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
+ FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_PSRAM;
+ FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
+ FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+ FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+ FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+ FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+ FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
+ FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
+ */
+}
+#endif /* DATA_IN_ExtSRAM */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|