/* ----------------------------------------------------------------------------------------------------------- Software License for The Fraunhofer FDK AAC Codec Library for Android © Copyright 1995 - 2013 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. All rights reserved. 1. INTRODUCTION The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. This FDK AAC Codec software is intended to be used on a wide variety of Android devices. AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part of the MPEG specifications. Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners individually for the purpose of encoding or decoding bit streams in products that are compliant with the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec software may already be covered under those patent licenses when it is used for those licensed purposes only. Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional applications information and documentation. 2. COPYRIGHT LICENSE Redistribution and use in source and binary forms, with or without modification, are permitted without payment of copyright license fees provided that you satisfy the following conditions: You must retain the complete text of this software license in redistributions of the FDK AAC Codec or your modifications thereto in source code form. You must retain the complete text of this software license in the documentation and/or other materials provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. You must make available free of charge copies of the complete source code of the FDK AAC Codec and your modifications thereto to recipients of copies in binary form. The name of Fraunhofer may not be used to endorse or promote products derived from this library without prior written permission. You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec software or your modifications thereto. Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software and the date of any change. For modified versions of the FDK AAC Codec, the term "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." 3. NO PATENT LICENSE NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with respect to this software. You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized by appropriate patent licenses. 4. DISCLAIMER This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, including but not limited to procurement of substitute goods or services; loss of use, data, or profits, or business interruption, however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence), arising in any way out of the use of this software, even if advised of the possibility of such damage. 5. CONTACT INFORMATION Fraunhofer Institute for Integrated Circuits IIS Attention: Audio and Multimedia Departments - FDK AAC LL Am Wolfsmantel 33 91058 Erlangen, Germany www.iis.fraunhofer.de/amm amm-info@iis.fraunhofer.de ----------------------------------------------------------------------------------------------------------- */ /*! \file \brief Envelope extraction prototypes */ #ifndef __ENVELOPE_EXTRACTION_H #define __ENVELOPE_EXTRACTION_H #include "sbrdecoder.h" #include "FDK_bitstream.h" #include "lpp_tran.h" #include "psdec.h" #define ENV_EXP_FRACT 0 /*!< Shift raw envelope data to support fractional numbers. Can be set to 8 instead of 0 to enhance accuracy during concealment. This is not required for conformance and #requantizeEnvelopeData() will become more expensive. */ #define EXP_BITS 6 /*!< Size of exponent-part of a pseudo float envelope value (should be at least 6). The remaining bits in each word are used for the mantissa (should be at least 10). This format is used in the arrays iEnvelope[] and sbrNoiseFloorLevel[] in the FRAME_DATA struct which must fit in a certain part of the output buffer (See buffer management in sbr_dec.cpp). Exponents and mantissas could also be stored in separate arrays. Accessing the exponent or the mantissa would be simplified and the masks #MASK_E resp. #MASK_M would no longer be required. */ #define MASK_M (((1 << (FRACT_BITS - EXP_BITS)) - 1) << EXP_BITS) /*!< Mask for extracting the mantissa of a pseudo float envelope value */ #define MASK_E ((1 << EXP_BITS) - 1) /*!< Mask for extracting the exponent of a pseudo float envelope value */ #define SIGN_EXT ( ((SCHAR)-1) ^ MASK_E) /*!< a CHAR-constant with all bits above our sign-bit set */ #define ROUNDING ( (FIXP_SGL)(1<<(EXP_BITS-1)) ) /*!< 0.5-offset for rounding the mantissa of a pseudo-float envelope value */ #define NRG_EXP_OFFSET 16 /*!< Will be added to the reference energy's exponent to prevent negative numbers */ #define NOISE_EXP_OFFSET 38 /*!< Will be added to the noise level exponent to prevent negative numbers */ typedef enum { HEADER_NOT_PRESENT, HEADER_OK, HEADER_RESET } SBR_HEADER_STATUS; typedef enum { SBR_NOT_INITIALIZED, UPSAMPLING, SBR_HEADER, SBR_ACTIVE } SBR_SYNC_STATE; typedef enum { COUPLING_OFF = 0, COUPLING_LEVEL, COUPLING_BAL } COUPLING_MODE; typedef struct { UCHAR nSfb[2]; /*!< Number of SBR-bands for low and high freq-resolution */ UCHAR nNfb; /*!< Actual number of noise bands to read from the bitstream*/ UCHAR numMaster; /*!< Number of SBR-bands in v_k_master */ UCHAR lowSubband; /*!< QMF-band where SBR frequency range starts */ UCHAR highSubband; /*!< QMF-band where SBR frequency range ends */ UCHAR limiterBandTable[MAX_NUM_LIMITERS+1]; /*!< Limiter band table. */ UCHAR noLimiterBands; /*!< Number of limiter bands. */ UCHAR nInvfBands; /*!< Number of bands for inverse filtering */ UCHAR *freqBandTable[2]; /*!< Pointers to freqBandTableLo and freqBandTableHi */ UCHAR freqBandTableLo[MAX_FREQ_COEFFS/2+1]; /*!< Mapping of SBR bands to QMF bands for low frequency resolution */ UCHAR freqBandTableHi[MAX_FREQ_COEFFS+1]; /*!< Mapping of SBR bands to QMF bands for high frequency resolution */ UCHAR freqBandTableNoise[MAX_NOISE_COEFFS+1]; /*!< Mapping of SBR noise bands to QMF bands */ UCHAR v_k_master[MAX_FREQ_COEFFS+1]; /*!< Master BandTable which freqBandTable is derived from */ } FREQ_BAND_DATA; typedef FREQ_BAND_DATA *HANDLE_FREQ_BAND_DATA; #define SBRDEC_ELD_GRID 1 #define SBRDEC_SYNTAX_SCAL 2 #define SBRDEC_SYNTAX_USAC 4 #define SBRDEC_SYNTAX_RSVD50 8 #define SBRDEC_LOW_POWER 16 /* Flag indicating that Low Power QMF mode shall be used. */ #define SBRDEC_PS_DECODED 32 /* Flag indicating that PS was decoded and rendered. */ #define SBRDEC_LD_MPS_QMF 512 /* Flag indicating that the LD-MPS QMF shall be used. */ #define SBRDEC_DOWNSAMPLE 8192 /* Flag indicating that the downsampling mode is used. */ #define SBRDEC_FLUSH 16384 /* Flag is used to flush all elements in use. */ #define SBRDEC_FORCE_RESET 32768 /* Flag is used to force a reset of all elements in use. */ #define SBRDEC_HDR_STAT_RESET 1 #define SBRDEC_HDR_STAT_UPDATE 2 typedef struct { UCHAR ampResolution; /*!< Amplitude resolution of envelope values (0: 1.5dB, 1: 3dB) */ UCHAR xover_band; /*!< Start index in #v_k_master[] used for dynamic crossover frequency */ UCHAR sbr_preprocessing; /*!< SBR prewhitening flag. */ } SBR_HEADER_DATA_BS_INFO; typedef struct { /* Changes in these variables causes a reset of the decoder */ UCHAR startFreq; /*!< Index for SBR start frequency */ UCHAR stopFreq; /*!< Index for SBR highest frequency */ UCHAR freqScale; /*!< 0: linear scale, 1-3 logarithmic scales */ UCHAR alterScale; /*!< Flag for coarser frequency resolution */ UCHAR noise_bands; /*!< Noise bands per octave, read from bitstream*/ /* don't require reset */ UCHAR limiterBands; /*!< Index for number of limiter bands per octave */ UCHAR limiterGains; /*!< Index to select gain limit */ UCHAR interpolFreq; /*!< Select gain calculation method (1: per QMF channel, 0: per SBR band) */ UCHAR smoothingLength; /*!< Smoothing of gains over time (0: on 1: off) */ } SBR_HEADER_DATA_BS; typedef struct { SBR_SYNC_STATE syncState; /*!< The current initialization status of the header */ UCHAR status; /*!< Flags field used for signaling a reset right before the processing starts and an update from config (e.g. ASC). */ UCHAR frameErrorFlag; /*!< Frame data valid flag. CAUTION: This variable will be overwritten by the flag stored in the element structure. This is necessary because of the frame delay. There it might happen that different slots use the same header. */ UCHAR numberTimeSlots; /*!< AAC: 16,15 */ UCHAR numberOfAnalysisBands; /*!< Number of QMF analysis bands */ UCHAR timeStep; /*!< Time resolution of SBR in QMF-slots */ UINT sbrProcSmplRate; /*!< SBR processing sampling frequency (!= OutputSamplingRate) (always: CoreSamplingRate * UpSamplingFactor; even in single rate mode) */ SBR_HEADER_DATA_BS bs_data; /*!< current SBR header. */ SBR_HEADER_DATA_BS_INFO bs_info; /*!< SBR info. */ FREQ_BAND_DATA freqBandData; /*!< Pointer to struct #FREQ_BAND_DATA */ } SBR_HEADER_DATA; typedef SBR_HEADER_DATA *HANDLE_SBR_HEADER_DATA; typedef struct { UCHAR frameClass; /*!< Select grid type */ UCHAR nEnvelopes; /*!< Number of envelopes */ UCHAR borders[MAX_ENVELOPES+1]; /*!< Envelope borders (in SBR-timeslots, e.g. mp3PRO: 0..11) */ UCHAR freqRes[MAX_ENVELOPES]; /*!< Frequency resolution for each envelope (0=low, 1=high) */ SCHAR tranEnv; /*!< Transient envelope, -1 if none */ UCHAR nNoiseEnvelopes; /*!< Number of noise envelopes */ UCHAR bordersNoise[MAX_NOISE_ENVELOPES+1];/*!< borders of noise envelopes */ } FRAME_INFO; typedef struct { FIXP_SGL sfb_nrg_prev[MAX_FREQ_COEFFS]; /*!< Previous envelope (required for differential-coded values) */ FIXP_SGL prevNoiseLevel[MAX_NOISE_COEFFS]; /*!< Previous noise envelope (required for differential-coded values) */ COUPLING_MODE coupling; /*!< Stereo-mode of previous frame */ INVF_MODE sbr_invf_mode[MAX_INVF_BANDS]; /*!< Previous strength of filtering in transposer */ UCHAR ampRes; /*!< Previous amplitude resolution (0: 1.5dB, 1: 3dB) */ UCHAR stopPos; /*!< Position in time where last envelope ended */ UCHAR frameErrorFlag; /*!< Previous frame status */ } SBR_PREV_FRAME_DATA; typedef SBR_PREV_FRAME_DATA *HANDLE_SBR_PREV_FRAME_DATA; typedef struct { int nScaleFactors; /*!< total number of scalefactors in frame */ FRAME_INFO frameInfo; /*!< time grid for current frame */ UCHAR domain_vec[MAX_ENVELOPES]; /*!< Bitfield containing direction of delta-coding for each envelope (0:frequency, 1:time) */ UCHAR domain_vec_noise[MAX_NOISE_ENVELOPES]; /*!< Same as above, but for noise envelopes */ INVF_MODE sbr_invf_mode[MAX_INVF_BANDS]; /*!< Strength of filtering in transposer */ COUPLING_MODE coupling; /*!< Stereo-mode */ int ampResolutionCurrentFrame; /*!< Amplitude resolution of envelope values (0: 1.5dB, 1: 3dB) */ UCHAR addHarmonics[MAX_FREQ_COEFFS]; /*!< Flags for synthetic sine addition */ FIXP_SGL iEnvelope[MAX_NUM_ENVELOPE_VALUES]; /*!< Envelope data */ FIXP_SGL sbrNoiseFloorLevel[MAX_NUM_NOISE_VALUES]; /*!< Noise envelope data */ } SBR_FRAME_DATA; typedef SBR_FRAME_DATA *HANDLE_SBR_FRAME_DATA; void initSbrPrevFrameData (HANDLE_SBR_PREV_FRAME_DATA h_prev_data, int timeSlots); int sbrGetSingleChannelElement (HANDLE_SBR_HEADER_DATA hHeaderData, HANDLE_SBR_FRAME_DATA hFrameData, HANDLE_FDK_BITSTREAM hBitBuf, HANDLE_PS_DEC hParametricStereoDec, const UINT flags, const int overlap ); int sbrGetChannelPairElement (HANDLE_SBR_HEADER_DATA hHeaderData, HANDLE_SBR_FRAME_DATA hFrameDataLeft, HANDLE_SBR_FRAME_DATA hFrameDataRight, HANDLE_FDK_BITSTREAM hBitBuf, const UINT flags, const int overlap); SBR_HEADER_STATUS sbrGetHeaderData (HANDLE_SBR_HEADER_DATA headerData, HANDLE_FDK_BITSTREAM hBitBuf, const UINT flags, const int fIsSbrData); /*! \brief Initialize SBR header data Copy default values to the header data struct and patch some entries depending on the core codec. */ SBR_ERROR initHeaderData ( HANDLE_SBR_HEADER_DATA hHeaderData, const int sampleRateIn, const int sampleRateOut, const int samplesPerFrame, const UINT flags ); #endif