From 08ca74724207d5dc3471d4a07d62c1a85784a546 Mon Sep 17 00:00:00 2001 From: Stefan Pöschel Date: Tue, 28 Apr 2015 23:24:43 +0200 Subject: Re-enable default conversion to EBU Latin based --- README.md | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index 7fbab37..ed604f2 100644 --- a/README.md +++ b/README.md @@ -211,17 +211,19 @@ can also read *mot-encoder* data. This is an ongoing development. Make sure you use the same pad length option for *mot-encoder* and the audio encoder. Only some pad lengths are supported, -please see *mot-encoder*'s help. Only pad lengths 34, 42 and 58 seem to be -working with some receivers, 23 and 26 appear to be broken. +please see *mot-encoder*'s help. Character Sets -------------- When *mot-encoder* is launched with the default character set encoding, it assumes that the DLS text in the file is encoded in UTF-8, and will convert it according to -the DAB standard. +the DAB standard to the EBU Latin based character set encoding. -If you set the character set encoding to anything else, *mot-encoder* will not perform -any conversion, and it is your responsibility to ensure the encoding is valid. +If you set the character set encoding to anything else (except: EBU Latin based, +which needs no conversion), *mot-encoder* will abort, as it does not support +any other conversion than from UTF-8 to EBU Latin based. +You can also use the -C option to transmit the untouched DLS text. In this case, +it is your responsibility to ensure the encoding is valid. Known Limitations ----------------- -- cgit v1.2.3