Fraunhofer AAC codec.

License boilerplate update to follow.

Change-Id: I2810460c11a58b6d148d84673cc031f3685e79b5

1 files changed, 1448 insertions, 0 deletions

diff --git a/libSBRdec/src/sbrdecoder.cpp b/libSBRdec/src/sbrdecoder.cpp
new file mode 100644
index 0000000..dc824cb
--- /dev/null
+++ b/libSBRdec/src/sbrdecoder.cpp
@@ -0,0 +1,1448 @@
+/****************************************************************************
+
+                     (C) Copyright Fraunhofer IIS (2005)
+                               All Rights Reserved
+
+    Please be advised that this software and/or program delivery is
+    Confidential Information of Fraunhofer and subject to and covered by the
+
+    Fraunhofer IIS Software Evaluation Agreement
+    between Google Inc. and  Fraunhofer
+    effective and in full force since March 1, 2012.
+
+    You may use this software and/or program only under the terms and
+    conditions described in the above mentioned Fraunhofer IIS Software
+    Evaluation Agreement. Any other and/or further use requires a separate agreement.
+
+
+   This software and/or program is protected by copyright law and international
+   treaties. Any reproduction or distribution of this software and/or program,
+   or any portion of it, may result in severe civil and criminal penalties, and
+   will be prosecuted to the maximum extent possible under law.
+
+ $Id$
+
+*******************************************************************************/
+/*!
+  \file
+  \brief  SBR decoder frontend $Revision: 36841 $
+  This module provides a frontend to the SBR decoder. The function openSBR() is called for
+  initialization. The function sbrDecoder_Apply() is called for each frame. sbr_Apply() will call the
+  required functions to decode the raw SBR data (provided by env_extr.cpp), to decode the envelope data and noise floor levels [decodeSbrData()],
+  and to finally apply SBR to the current frame [sbr_dec()].
+
+  \sa sbrDecoder_Apply(), \ref documentationOverview
+*/
+
+/*!
+  \page documentationOverview Overview of important information resources and source code documentation
+
+  The primary source code documentation is based on generated and cross-referenced HTML files using
+  <a HREF="http://www.doxygen.org">doxygen</a>. As part of this documentation
+  you can find more extensive descriptions about key concepts and algorithms at the following locations:
+
+  <h2>Programming</h2>
+
+  \li Buffer management: sbrDecoder_Apply() and sbr_dec()
+  \li Internal scale factors to maximize SNR on fixed point processors: #QMF_SCALE_FACTOR
+  \li Special mantissa-exponent format: Created in requantizeEnvelopeData() and used in calculateSbrEnvelope()
+
+  <h2>Algorithmic details</h2>
+  \li About the SBR data format: \ref SBR_HEADER_ELEMENT and \ref SBR_STANDARD_ELEMENT
+  \li Details about the bitstream decoder: env_extr.cpp
+  \li Details about the QMF filterbank and the provided polyphase implementation: qmf_dec.cpp
+  \li Details about the transposer: lpp_tran.cpp
+  \li Details about the envelope adjuster: env_calc.cpp
+
+*/
+
+#include "sbrdecoder.h"
+
+#include "FDK_bitstream.h"
+
+#include "sbrdec_freq_sca.h"
+#include "env_extr.h"
+#include "sbr_dec.h"
+#include "env_dec.h"
+#include "sbr_crc.h"
+#include "sbr_ram.h"
+#include "sbr_rom.h"
+#include "lpp_tran.h"
+#include "transcendent.h"
+
+
+#include "sbrdec_drc.h"
+
+#include "psbitdec.h"
+
+
+/* Decoder library info */
+#define SBRDECODER_LIB_VL0 2
+#define SBRDECODER_LIB_VL1 1
+#define SBRDECODER_LIB_VL2 0
+#define SBRDECODER_LIB_TITLE "SBR Decoder"
+#define SBRDECODER_LIB_BUILD_DATE __DATE__
+#define SBRDECODER_LIB_BUILD_TIME __TIME__
+
+
+
+
+static UCHAR getHeaderSlot( UCHAR currentSlot, UCHAR hdrSlotUsage[(1)+1] )
+{
+  UINT  occupied = 0;
+  int   s;
+  UCHAR slot = hdrSlotUsage[currentSlot];
+
+  FDK_ASSERT((1)+1 < 32);
+
+  for (s = 0; s < (1)+1; s++) {
+    if ( (hdrSlotUsage[s] == slot)
+      && (s != slot) ) {
+      occupied = 1;
+      break;
+    }
+  }
+
+  if (occupied) {
+    occupied = 0;
+
+    for (s = 0; s < (1)+1; s++) {
+      occupied |= 1 << hdrSlotUsage[s];
+    }
+    for (s = 0; s < (1)+1; s++) {
+      if ( !(occupied & 0x1) ) {
+        slot = s;
+        break;
+      }
+      occupied >>= 1;
+    }
+  }
+
+  return slot;
+}
+
+static void copySbrHeader( HANDLE_SBR_HEADER_DATA hDst, const HANDLE_SBR_HEADER_DATA hSrc )
+{
+  /* copy the whole header memory (including pointers) */
+  FDKmemcpy( hDst, hSrc, sizeof(SBR_HEADER_DATA) );
+
+  /* update pointers */
+  hDst->freqBandData.freqBandTable[0]  = hDst->freqBandData.freqBandTableLo;
+  hDst->freqBandData.freqBandTable[1] = hDst->freqBandData.freqBandTableHi;
+}
+
+
+/*!
+  \brief Reset SBR decoder.
+
+  Reset should only be called if SBR has been sucessfully detected by
+  an appropriate checkForPayload() function.
+
+  \return Error code.
+*/
+static
+SBR_ERROR sbrDecoder_ResetElement (
+        HANDLE_SBRDECODER    self,
+        int                  sampleRateIn,
+        int                  sampleRateOut,
+        int                  samplesPerFrame,
+        const MP4_ELEMENT_ID elementID,
+        const int            elementIndex,
+        const int            overlap
+        )
+{
+  SBR_ERROR sbrError = SBRDEC_OK;
+  HANDLE_SBR_HEADER_DATA hSbrHeader;
+  UINT qmfFlags = 0;
+
+  int i, synDownsampleFac;
+
+  /* Check in/out samplerates */
+  if ( sampleRateIn < 6400
+    || sampleRateIn > 24000
+     )
+  {
+    sbrError = SBRDEC_UNSUPPORTED_CONFIG;
+    goto bail;
+  }
+
+  if ( sampleRateOut > 48000 )
+  {
+    sbrError = SBRDEC_UNSUPPORTED_CONFIG;
+    goto bail;
+  }
+
+  /* Set QMF mode flags */
+  if (self->flags & SBRDEC_LOW_POWER)
+    qmfFlags |= QMF_FLAG_LP;
+
+  if (self->coreCodec == AOT_ER_AAC_ELD) {
+    if (self->flags & SBRDEC_LD_MPS_QMF) {
+      qmfFlags |=  QMF_FLAG_MPSLDFB;
+    } else {
+      qmfFlags |=  QMF_FLAG_CLDFB;
+    }
+  }
+
+  /* Set downsampling factor for synthesis filter bank */
+  if (sampleRateOut == 0)
+  {
+    /* no single rate mode */
+      sampleRateOut = sampleRateIn<<1; /* In case of implicit signalling, assume dual rate SBR */
+  }
+
+  if ( sampleRateIn == sampleRateOut ) {
+    synDownsampleFac = 2;
+  } else {
+    synDownsampleFac = 1;
+  }
+
+  self->synDownsampleFac = synDownsampleFac;
+  self->sampleRateOut = sampleRateOut;
+
+  {
+    int i;
+
+    for (i = 0; i < (1)+1; i++)
+    {
+      hSbrHeader = &(self->sbrHeader[elementIndex][i]);
+
+      /* init a default header such that we can at least do upsampling later */
+      sbrError = initHeaderData(
+              hSbrHeader,
+              sampleRateIn,
+              sampleRateOut,
+              samplesPerFrame,
+              self->flags
+              );
+    }
+  }
+
+  if (sbrError != SBRDEC_OK) {
+    goto bail;
+  }
+
+  /* Init SBR channels going to be assigned to a SBR element */
+  {
+    int ch;
+
+    for (ch=0; ch<self->pSbrElement[elementIndex]->nChannels; ch++)
+    {
+      /* and create sbrDec */
+      sbrError = createSbrDec (self->pSbrElement[elementIndex]->pSbrChannel[ch],
+                          hSbrHeader,
+                         &self->pSbrElement[elementIndex]->transposerSettings,
+                          synDownsampleFac,
+                          qmfFlags,
+                          self->flags,
+                          overlap,
+                          ch );
+
+      if (sbrError != SBRDEC_OK) {
+        goto bail;
+      }
+    }
+  }
+
+  //FDKmemclear(sbr_OverlapBuffer, sizeof(sbr_OverlapBuffer));
+
+  if (self->numSbrElements == 1) {
+    switch ( self->coreCodec ) {
+    case AOT_AAC_LC:
+    case AOT_SBR:
+    case AOT_PS:
+    case AOT_ER_AAC_SCAL:
+    case AOT_DRM_AAC:
+    case AOT_DRM_SURROUND:
+      if (CreatePsDec ( &self->hParametricStereoDec, samplesPerFrame )) {
+        sbrError = SBRDEC_CREATE_ERROR;
+        goto bail;
+      }
+      break;
+    default:
+      break;
+    }
+  }
+
+  /* Init frame delay slot handling */
+  self->pSbrElement[elementIndex]->useFrameSlot = 0;
+  for (i = 0; i < ((1)+1); i++) {
+    self->pSbrElement[elementIndex]->useHeaderSlot[i] = i;
+  }
+
+bail:
+
+  return sbrError;
+}
+
+
+SBR_ERROR sbrDecoder_Open ( HANDLE_SBRDECODER  * pSelf )
+{
+  HANDLE_SBRDECODER    self = NULL;
+  SBR_ERROR sbrError = SBRDEC_OK;
+
+  /* Get memory for this instance */
+  self = GetRam_SbrDecoder();
+  if (self == NULL) {
+    sbrError = SBRDEC_MEM_ALLOC_FAILED;
+    goto bail;
+  }
+
+  self->workBuffer1 = GetRam_SbrDecWorkBuffer1();
+  self->workBuffer2 = GetRam_SbrDecWorkBuffer2();
+
+  if (  self->workBuffer1 == NULL
+     || self->workBuffer2 == NULL )
+  {
+    sbrError = SBRDEC_MEM_ALLOC_FAILED;
+    goto bail;
+  }
+
+  /*
+  Already zero because of calloc
+  self->numSbrElements = 0;
+  self->numSbrChannels = 0;
+  self->codecFrameSize = 0;
+  */
+
+  self->numDelayFrames = (1);  /* set to the max value by default */
+
+  *pSelf = self;
+
+bail:
+  return sbrError;
+}
+
+/**
+ * \brief determine if the given core codec AOT can be processed or not.
+ * \param coreCodec core codec audio object type.
+ * \return 1 if SBR can be processed, 0 if SBR cannot be processed/applied.
+ */
+static
+int sbrDecoder_isCoreCodecValid(AUDIO_OBJECT_TYPE coreCodec)
+{
+  switch (coreCodec) {
+    case AOT_AAC_LC:
+    case AOT_SBR:
+    case AOT_PS:
+    case AOT_ER_AAC_SCAL:
+    case AOT_ER_AAC_ELD:
+      return 1;
+    default:
+      return 0;
+  }
+}
+
+static
+void sbrDecoder_DestroyElement (
+        HANDLE_SBRDECODER       self,
+        const int               elementIndex
+        )
+{
+  if (self->pSbrElement[elementIndex] != NULL) {
+    int ch;
+
+    for (ch=0; ch<SBRDEC_MAX_CH_PER_ELEMENT; ch++) {
+      if (self->pSbrElement[elementIndex]->pSbrChannel[ch] != NULL) {
+        deleteSbrDec( self->pSbrElement[elementIndex]->pSbrChannel[ch] );
+        FreeRam_SbrDecChannel( &self->pSbrElement[elementIndex]->pSbrChannel[ch] );
+        self->numSbrChannels -= 1;
+      }
+    }
+    FreeRam_SbrDecElement( &self->pSbrElement[elementIndex] );
+    self->numSbrElements -= 1;
+  }
+}
+
+
+SBR_ERROR sbrDecoder_InitElement (
+        HANDLE_SBRDECODER       self,
+        const int               sampleRateIn,
+        const int               sampleRateOut,
+        const int               samplesPerFrame,
+        const AUDIO_OBJECT_TYPE coreCodec,
+        const MP4_ELEMENT_ID    elementID,
+        const int               elementIndex
+        )
+{
+  SBR_ERROR sbrError = SBRDEC_OK;
+  int chCnt=0;
+
+  /* Check core codec AOT */
+  if (! sbrDecoder_isCoreCodecValid(coreCodec) || elementIndex >= (4)) {
+    sbrError = SBRDEC_UNSUPPORTED_CONFIG;
+    goto bail;
+  }
+
+  if ( elementID != ID_SCE && elementID != ID_CPE && elementID != ID_LFE )
+  {
+    sbrError = SBRDEC_UNSUPPORTED_CONFIG;
+    goto bail;
+  }
+
+  if (  self->sampleRateIn == sampleRateIn
+     && self->codecFrameSize == samplesPerFrame
+     && self->coreCodec == coreCodec
+     && self->pSbrElement[elementIndex] != NULL
+     && self->pSbrElement[elementIndex]->elementID == elementID
+     )
+  {
+     /* Nothing to do */
+     return SBRDEC_OK;
+  }
+
+  self->sampleRateIn = sampleRateIn;
+  self->codecFrameSize = samplesPerFrame;
+  self->coreCodec = coreCodec;
+
+  self->flags = 0;
+  self->flags |= (coreCodec == AOT_ER_AAC_ELD) ? SBRDEC_ELD_GRID : 0;
+
+  /* Init SBR elements */
+  {
+    int elChannels, ch;
+
+    if (self->pSbrElement[elementIndex] == NULL) {
+      self->pSbrElement[elementIndex] = GetRam_SbrDecElement(elementIndex);
+      if (self->pSbrElement[elementIndex] == NULL) {
+        sbrError = SBRDEC_MEM_ALLOC_FAILED;
+        goto bail;
+      }
+      self->numSbrElements ++;
+    } else {
+      self->numSbrChannels -= self->pSbrElement[elementIndex]->nChannels;
+    }
+
+    /* Save element ID for sanity checks and to have a fallback for concealment. */
+    self->pSbrElement[elementIndex]->elementID = elementID;
+
+    /* Determine amount of channels for this element */
+    switch (elementID) {
+      case ID_NONE:
+      case ID_CPE: elChannels=2;
+        break;
+      case ID_LFE:
+      case ID_SCE: elChannels=1;
+        break;
+      default: elChannels=0;
+        break;
+    }
+
+    /* Handle case of Parametric Stereo */
+    if ( elementIndex == 0 && elementID == ID_SCE ) {
+      switch (coreCodec) {
+        case AOT_AAC_LC:
+        case AOT_SBR:
+        case AOT_PS:
+        case AOT_ER_AAC_SCAL:
+        case AOT_DRM_AAC:
+        case AOT_DRM_SURROUND:
+          elChannels = 2;
+          break;
+        default:
+          break;
+      }
+    }
+
+    self->pSbrElement[elementIndex]->nChannels = elChannels;
+
+    for (ch=0; ch<elChannels; ch++)
+    {
+      if (self->pSbrElement[elementIndex]->pSbrChannel[ch] == NULL) {
+        self->pSbrElement[elementIndex]->pSbrChannel[ch] = GetRam_SbrDecChannel(chCnt);
+        if (self->pSbrElement[elementIndex]->pSbrChannel[ch] == NULL) {
+          sbrError = SBRDEC_MEM_ALLOC_FAILED;
+          goto bail;
+        }
+      }
+      self->numSbrChannels ++;
+
+      sbrDecoder_drcInitChannel( &self->pSbrElement[elementIndex]->pSbrChannel[ch]->SbrDec.sbrDrcChannel );
+
+      /* Add reference pointer to workbuffers. */
+      self->pSbrElement[elementIndex]->pSbrChannel[ch]->SbrDec.WorkBuffer1 = self->workBuffer1;
+      self->pSbrElement[elementIndex]->pSbrChannel[ch]->SbrDec.WorkBuffer2 = self->workBuffer2;
+      chCnt++;
+    }
+    if (elChannels == 1 && self->pSbrElement[elementIndex]->pSbrChannel[ch] != NULL) {
+      deleteSbrDec( self->pSbrElement[elementIndex]->pSbrChannel[ch] );
+      FreeRam_SbrDecChannel( &self->pSbrElement[elementIndex]->pSbrChannel[ch] );
+    }
+  }
+
+  /* clear error flags for all delay slots */
+  FDKmemclear(self->pSbrElement[elementIndex]->frameErrorFlag, ((1)+1)*sizeof(UCHAR));
+
+  /* Initialize this instance */
+  sbrError = sbrDecoder_ResetElement( 
+          self,
+          sampleRateIn,
+          sampleRateOut,
+          samplesPerFrame,
+          elementID,
+          elementIndex,
+          (coreCodec == AOT_ER_AAC_ELD) ? 0 : (6)
+          );
+
+
+
+bail:
+  if (sbrError != SBRDEC_OK) {
+    /* Free the memory allocated for this element */
+    sbrDecoder_DestroyElement( self, elementIndex );
+  }
+
+  return sbrError;
+}
+
+/**
+ * \brief Apply decoded SBR header for one element.
+ * \param self SBR decoder instance handle
+ * \param hSbrHeader SBR header handle to be processed.
+ * \param hSbrChannel pointer array to the SBR element channels corresponding to the SBR header.
+ * \param headerStatus header status value returned from SBR header parser.
+ * \param numElementChannels amount of channels for the SBR element whos header is to be processed.
+ */
+static
+SBR_ERROR sbrDecoder_HeaderUpdate(
+        HANDLE_SBRDECODER self,
+        HANDLE_SBR_HEADER_DATA hSbrHeader,
+        SBR_HEADER_STATUS headerStatus,
+        HANDLE_SBR_CHANNEL hSbrChannel[],
+        const int numElementChannels
+        )
+{
+  SBR_ERROR errorStatus = SBRDEC_OK;
+ 
+  /*
+    change of control data, reset decoder
+  */
+  errorStatus = resetFreqBandTables(hSbrHeader, self->flags);
+
+  if (errorStatus == SBRDEC_OK) {
+    if (hSbrHeader->syncState == UPSAMPLING && headerStatus != HEADER_RESET)
+    {
+      /* As the default header would limit the frequency range,
+         lowSubband and highSubband must be patched. */
+      hSbrHeader->freqBandData.lowSubband = hSbrHeader->numberOfAnalysisBands;
+      hSbrHeader->freqBandData.highSubband = hSbrHeader->numberOfAnalysisBands;
+    }
+
+    /* Trigger a reset before processing this slot */
+    hSbrHeader->status |= SBRDEC_HDR_STAT_RESET;
+  }
+
+  return errorStatus;
+}
+
+INT sbrDecoder_Header (
+        HANDLE_SBRDECODER       self,
+        HANDLE_FDK_BITSTREAM    hBs,
+        const INT sampleRateIn,
+        const INT sampleRateOut,
+        const INT samplesPerFrame,
+        const AUDIO_OBJECT_TYPE coreCodec,
+        const MP4_ELEMENT_ID    elementID,
+        const INT               elementIndex
+        )
+{
+  SBR_HEADER_STATUS headerStatus;
+  HANDLE_SBR_HEADER_DATA hSbrHeader;
+  SBR_ERROR sbrError = SBRDEC_OK;
+  int headerIndex;
+
+  if ( self == NULL || elementIndex > (4) )
+  {
+    return SBRDEC_UNSUPPORTED_CONFIG;
+  }
+
+  if (! sbrDecoder_isCoreCodecValid(coreCodec)) {
+    return SBRDEC_UNSUPPORTED_CONFIG;
+  }
+
+  sbrError = sbrDecoder_InitElement(
+          self,
+          sampleRateIn,
+          sampleRateOut,
+          samplesPerFrame,
+          coreCodec,
+          elementID,
+          elementIndex
+          );
+
+  if (sbrError != SBRDEC_OK) {
+    goto bail;
+  }
+
+  headerIndex = getHeaderSlot(self->pSbrElement[elementIndex]->useFrameSlot,
+                              self->pSbrElement[elementIndex]->useHeaderSlot);
+  hSbrHeader = &(self->sbrHeader[elementIndex][headerIndex]);
+
+  headerStatus = sbrGetHeaderData ( hSbrHeader,
+                                    hBs,
+                                    self->flags,
+                                    0);
+
+
+  {
+    SBR_DECODER_ELEMENT *pSbrElement;
+
+    pSbrElement = self->pSbrElement[elementIndex];
+
+    /* Sanity check */
+    if (pSbrElement != NULL) {
+      if ( (elementID == ID_CPE && pSbrElement->nChannels != 2)
+        || (elementID != ID_CPE && pSbrElement->nChannels != 1) )
+      {
+        return SBRDEC_UNSUPPORTED_CONFIG;
+      }
+      if ( headerStatus == HEADER_RESET ) {
+
+        sbrError = sbrDecoder_HeaderUpdate(
+              self,
+              hSbrHeader,
+              headerStatus,
+              pSbrElement->pSbrChannel,
+              pSbrElement->nChannels
+              );
+
+        if (sbrError == SBRDEC_OK) {
+          hSbrHeader->syncState = SBR_HEADER;
+          hSbrHeader->status   |= SBRDEC_HDR_STAT_UPDATE;
+        }
+        /* else {
+          Since we already have overwritten the old SBR header the only way out is UPSAMPLING!
+          This will be prepared in the next step.
+        } */
+      }
+    }
+  }
+bail:
+  return sbrError;
+}
+
+
+SBR_ERROR sbrDecoder_SetParam (HANDLE_SBRDECODER   self,
+                               const SBRDEC_PARAM  param,
+                               const INT           value )
+{
+  SBR_ERROR errorStatus = SBRDEC_OK;
+
+  /* configure the subsystems */
+  switch (param)
+  {
+  case SBR_SYSTEM_BITSTREAM_DELAY:
+    if (value < 0 || value > (1)) {
+      errorStatus = SBRDEC_SET_PARAM_FAIL;
+      break;
+    }
+    if (self == NULL) {
+      errorStatus = SBRDEC_NOT_INITIALIZED;
+    } else {
+      self->numDelayFrames = (UCHAR)value;
+    }
+    break;
+  case SBR_QMF_MODE:
+    if (self == NULL) {
+      errorStatus = SBRDEC_NOT_INITIALIZED;
+    } else {
+      if (value == 1) {
+        self->flags |= SBRDEC_LOW_POWER;
+      } else {
+        self->flags &= ~SBRDEC_LOW_POWER;
+      }
+    }
+    break;
+  case SBR_LD_QMF_TIME_ALIGN:
+    if (self == NULL) {
+      errorStatus = SBRDEC_NOT_INITIALIZED;
+    } else {
+      if (value == 1) {
+        self->flags |= SBRDEC_LD_MPS_QMF;
+      } else {
+        self->flags &= ~SBRDEC_LD_MPS_QMF;
+      }
+    }
+    break;
+  case SBR_BS_INTERRUPTION:
+    {
+      int elementIndex;
+      /* Loop over SBR elements */
+      for (elementIndex = 0; elementIndex < self->numSbrElements; elementIndex++)
+      {
+        HANDLE_SBR_HEADER_DATA hSbrHeader;
+        int headerIndex = getHeaderSlot(self->pSbrElement[elementIndex]->useFrameSlot,
+                                        self->pSbrElement[elementIndex]->useHeaderSlot);
+
+        hSbrHeader = &(self->sbrHeader[elementIndex][headerIndex]);
+
+        /* Set sync state UPSAMPLING for the corresponding slot.
+           This switches off bitstream parsing until a new header arrives. */
+        hSbrHeader->syncState = UPSAMPLING;
+        hSbrHeader->status   |= SBRDEC_HDR_STAT_UPDATE;
+      }
+    }
+    break;
+  default:
+    errorStatus = SBRDEC_SET_PARAM_FAIL;
+    break;
+  }  /* switch(param) */
+
+  return (errorStatus);
+}
+
+static
+SBRDEC_DRC_CHANNEL * sbrDecoder_drcGetChannel( const HANDLE_SBRDECODER self, const INT channel )
+{
+  SBRDEC_DRC_CHANNEL *pSbrDrcChannelData = NULL;
+  int elementIndex, elChanIdx=0, numCh=0;
+
+  for (elementIndex = 0; (elementIndex < (4)) && (numCh <= channel); elementIndex++)
+  {
+    SBR_DECODER_ELEMENT *pSbrElement = self->pSbrElement[elementIndex];
+    int c, elChannels;
+
+    elChanIdx = 0;
+    if (pSbrElement == NULL) break;
+
+    /* Determine amount of channels for this element */
+    switch (pSbrElement->elementID) {
+      case ID_CPE: elChannels = 2;
+        break;
+      case ID_LFE:
+      case ID_SCE: elChannels = 1;
+        break;
+      case ID_NONE:
+      default: elChannels = 0;
+        break;
+    }
+
+    /* Limit with actual allocated element channels */
+    elChannels = FDKmin(elChannels, pSbrElement->nChannels);
+
+    for (c = 0; (c < elChannels) && (numCh <= channel); c++) {
+      if (pSbrElement->pSbrChannel[elChanIdx] != NULL) {
+        numCh++;
+        elChanIdx++;
+      }
+    }
+  }
+  elementIndex -= 1;
+  elChanIdx -= 1;
+
+  if (elChanIdx < 0 || elementIndex < 0) {
+    return NULL;
+  }
+
+  if ( self->pSbrElement[elementIndex] != NULL ) {
+    if ( self->pSbrElement[elementIndex]->pSbrChannel[elChanIdx] != NULL )
+    {
+      pSbrDrcChannelData = &self->pSbrElement[elementIndex]->pSbrChannel[elChanIdx]->SbrDec.sbrDrcChannel;
+    }
+  }
+
+  return (pSbrDrcChannelData);
+}
+
+SBR_ERROR sbrDecoder_drcFeedChannel ( HANDLE_SBRDECODER  self,
+                                      INT                ch,
+                                      UINT               numBands,
+                                      FIXP_DBL          *pNextFact_mag,
+                                      INT                nextFact_exp,
+                                      SHORT              drcInterpolationScheme,
+                                      UCHAR              winSequence,
+                                      USHORT            *pBandTop )
+{
+  SBRDEC_DRC_CHANNEL *pSbrDrcChannelData = NULL;
+
+  if (self == NULL) {
+    return SBRDEC_NOT_INITIALIZED;
+  }
+  if (ch > (6) || pNextFact_mag == NULL) {
+    return SBRDEC_SET_PARAM_FAIL;
+  }
+
+  /* Find the right SBR channel */
+  pSbrDrcChannelData = sbrDecoder_drcGetChannel( self, ch );
+
+  if ( pSbrDrcChannelData != NULL ) {
+    int i;
+
+    pSbrDrcChannelData->enable   = 1;
+    pSbrDrcChannelData->numBandsNext = numBands;
+
+    pSbrDrcChannelData->winSequenceNext            = winSequence;
+    pSbrDrcChannelData->drcInterpolationSchemeNext = drcInterpolationScheme;
+    pSbrDrcChannelData->nextFact_exp               = nextFact_exp;
+
+    for (i = 0; i < (int)numBands; i++) {
+      pSbrDrcChannelData->bandTopNext[i]  = pBandTop[i];
+      pSbrDrcChannelData->nextFact_mag[i] = pNextFact_mag[i];
+    }
+  }
+
+  return SBRDEC_OK;
+}
+
+
+void sbrDecoder_drcDisable ( HANDLE_SBRDECODER  self,
+                             INT                ch )
+{
+  SBRDEC_DRC_CHANNEL *pSbrDrcChannelData = NULL;
+
+  if ( (self == NULL)
+    || (ch > (6))
+    || (self->numSbrElements == 0)
+    || (self->numSbrChannels == 0) ) {
+    return;
+  }
+
+  /* Find the right SBR channel */
+  pSbrDrcChannelData = sbrDecoder_drcGetChannel( self, ch );
+
+  if ( pSbrDrcChannelData != NULL ) {
+    pSbrDrcChannelData->enable = 0;
+  }
+}
+
+
+
+SBR_ERROR sbrDecoder_Parse(
+        HANDLE_SBRDECODER self,
+        HANDLE_FDK_BITSTREAM  hBs,
+        int *count,
+        int  bsPayLen,
+        int  crcFlag,
+        MP4_ELEMENT_ID prevElement,
+        int elementIndex,
+        int fGlobalIndependencyFlag
+        )
+{
+  SBR_DECODER_ELEMENT   *hSbrElement;
+  HANDLE_SBR_HEADER_DATA hSbrHeader;
+  HANDLE_SBR_CHANNEL    *pSbrChannel;
+
+  SBR_FRAME_DATA *hFrameDataLeft;
+  SBR_FRAME_DATA *hFrameDataRight;
+
+  SBR_ERROR errorStatus = SBRDEC_OK;
+  SBR_SYNC_STATE initialSyncState;
+  SBR_HEADER_STATUS headerStatus = HEADER_NOT_PRESENT;
+
+  INT  startPos;
+  INT  CRCLen = 0;
+
+  int  stereo;
+  int  fDoDecodeSbrData = 1;
+
+  int lastSlot, lastHdrSlot = 0, thisHdrSlot;
+
+  /* Remember start position of  SBR element */
+  startPos = FDKgetValidBits(hBs);
+
+  /* SBR sanity checks */
+  if ( self == NULL || self->pSbrElement[elementIndex] == NULL ) {
+    errorStatus = SBRDEC_NOT_INITIALIZED;
+    goto bail;
+  } 
+
+  hSbrElement = self->pSbrElement[elementIndex];
+
+  lastSlot    = (hSbrElement->useFrameSlot > 0) ? hSbrElement->useFrameSlot-1 : self->numDelayFrames;
+  lastHdrSlot =  hSbrElement->useHeaderSlot[lastSlot];
+  thisHdrSlot =  getHeaderSlot( hSbrElement->useFrameSlot, hSbrElement->useHeaderSlot );  /* Get a free header slot not used by frames not processed yet. */
+
+  /* Assign the free slot to store a new header if there is one. */
+  hSbrHeader = &self->sbrHeader[elementIndex][thisHdrSlot];
+
+  pSbrChannel = hSbrElement->pSbrChannel;
+  stereo = (hSbrElement->elementID == ID_CPE) ? 1 : 0;
+
+  hFrameDataLeft  = &self->pSbrElement[elementIndex]->pSbrChannel[0]->frameData[hSbrElement->useFrameSlot];
+  hFrameDataRight = &self->pSbrElement[elementIndex]->pSbrChannel[1]->frameData[hSbrElement->useFrameSlot];
+
+  initialSyncState = hSbrHeader->syncState;
+
+  /* reset PS flag; will be set after PS was found */
+  self->flags &= ~SBRDEC_PS_DECODED;
+
+  if (hSbrHeader->status & SBRDEC_HDR_STAT_UPDATE) {
+    /* Got a new header from extern (e.g. from an ASC) */
+    headerStatus = HEADER_OK;
+    hSbrHeader->status &= ~SBRDEC_HDR_STAT_UPDATE;
+  }
+  else if (thisHdrSlot != lastHdrSlot) {
+    /* Copy the last header into this slot otherwise the
+       header compare will trigger more HEADER_RESETs than needed. */
+    copySbrHeader( hSbrHeader, &self->sbrHeader[elementIndex][lastHdrSlot] );
+  }
+
+  /*
+     Check if bit stream data is valid and matches the element context
+  */
+  if ( ((prevElement != ID_SCE) && (prevElement != ID_CPE)) || prevElement != hSbrElement->elementID) {
+    /* In case of LFE we also land here, since there is no LFE SBR element (do upsampling only) */
+    fDoDecodeSbrData = 0;
+  }
+
+  if (fDoDecodeSbrData)
+  {
+    if ((INT)FDKgetValidBits(hBs) <= 0) {
+      fDoDecodeSbrData = 0;
+    }
+  }
+
+  /*
+     SBR CRC-check
+  */
+  if (fDoDecodeSbrData)
+  {
+    if (crcFlag == 1) {
+      switch (self->coreCodec) {
+      case AOT_ER_AAC_ELD:
+        FDKpushFor (hBs, 10);
+        /* check sbrcrc later: we don't know the payload length now */
+        break;
+      default:
+        CRCLen = bsPayLen - 10;                     /* change: 0 => i */
+        if (CRCLen < 0) {
+          fDoDecodeSbrData = 0;
+        } else {
+          fDoDecodeSbrData = SbrCrcCheck (hBs, CRCLen);
+        }
+        break;
+      }
+    }
+  } /* if (fDoDecodeSbrData) */
+
+  /*
+     Read in the header data and issue a reset if change occured
+  */
+  if (fDoDecodeSbrData)
+  {
+    int sbrHeaderPresent;
+
+    {
+      sbrHeaderPresent = FDKreadBit(hBs);
+    }
+
+    if ( sbrHeaderPresent ) {
+      headerStatus = sbrGetHeaderData (hSbrHeader,
+                                       hBs,
+                                       self->flags,
+                                       1);
+    }
+
+    if (headerStatus == HEADER_RESET) {
+      errorStatus = sbrDecoder_HeaderUpdate(
+            self,
+            hSbrHeader,
+            headerStatus,
+            pSbrChannel,
+            hSbrElement->nChannels 
+            );
+
+      if (errorStatus == SBRDEC_OK) {
+        hSbrHeader->syncState = SBR_HEADER;
+      } else {
+        hSbrHeader->syncState = SBR_NOT_INITIALIZED;
+      }
+    }
+
+    if (errorStatus != SBRDEC_OK) {
+      fDoDecodeSbrData = 0;
+    }
+  } /* if (fDoDecodeSbrData) */
+
+  /*
+    Print debugging output only if state has changed
+  */
+
+  /* read frame data */
+  if ((hSbrHeader->syncState >= SBR_HEADER) && fDoDecodeSbrData) {
+    int sbrFrameOk;
+    /* read the SBR element data */
+    if (stereo) {
+      sbrFrameOk = sbrGetChannelPairElement(hSbrHeader,
+                                            hFrameDataLeft,
+                                            hFrameDataRight,
+                                            hBs,
+                                            self->flags,
+                                            self->pSbrElement[elementIndex]->transposerSettings.overlap);
+    }
+    else {
+      if (self->hParametricStereoDec != NULL) {
+        /* update slot index for PS bitstream parsing */
+        self->hParametricStereoDec->bsLastSlot = self->hParametricStereoDec->bsReadSlot;
+        self->hParametricStereoDec->bsReadSlot = hSbrElement->useFrameSlot;
+      }
+      sbrFrameOk = sbrGetSingleChannelElement(hSbrHeader,
+                                              hFrameDataLeft,
+                                              hBs,
+                                              self->hParametricStereoDec,
+                                              self->flags,
+                                              self->pSbrElement[elementIndex]->transposerSettings.overlap);
+    }
+    if (!sbrFrameOk) {
+      fDoDecodeSbrData = 0;
+    }
+    else {
+      INT valBits;
+
+      if (bsPayLen > 0) {
+        valBits = bsPayLen - ((INT)startPos - (INT)FDKgetValidBits(hBs));
+      } else {
+        valBits = (INT)FDKgetValidBits(hBs);
+      }
+
+      if ( crcFlag == 1 ) {
+        switch (self->coreCodec) {
+        case AOT_ER_AAC_ELD:
+          {
+            /* late crc check for eld */
+            INT payloadbits = (INT)startPos - (INT)FDKgetValidBits(hBs) - startPos;
+            INT crcLen      = payloadbits - 10;
+            FDKpushBack(hBs, payloadbits);
+            fDoDecodeSbrData      = SbrCrcCheck (hBs, crcLen);
+            FDKpushFor(hBs, crcLen);
+          }
+          break;
+        default:
+          break;
+        }
+      }
+
+      /* sanity check of remaining bits */
+      if (valBits < 0) {
+        fDoDecodeSbrData = 0;
+      } else {
+        switch (self->coreCodec) {
+        case AOT_SBR:
+        case AOT_PS:
+        case AOT_AAC_LC:
+          {
+            /* This sanity check is only meaningful with General Audio bitstreams */
+            int alignBits = valBits & 0x7;
+
+            if (valBits > alignBits) {
+              fDoDecodeSbrData = 0;
+            }
+          }
+          break;
+        default:
+          /* No sanity check available */
+          break;
+        }
+      }
+    }
+  }
+
+  if (!fDoDecodeSbrData) {
+    /* Set error flag for this slot to trigger concealment */
+    self->pSbrElement[elementIndex]->frameErrorFlag[hSbrElement->useFrameSlot] = 1;
+    errorStatus = SBRDEC_PARSE_ERROR;
+  } else {
+    /* Everything seems to be ok so clear the error flag */
+    self->pSbrElement[elementIndex]->frameErrorFlag[hSbrElement->useFrameSlot] = 0;
+  }
+
+  if (!stereo) {
+    /* Turn coupling off explicitely to avoid access to absent right frame data
+       that might occur with corrupt bitstreams. */
+    hFrameDataLeft->coupling = COUPLING_OFF;
+  }
+
+bail:
+  if (errorStatus == SBRDEC_OK) {
+    if (headerStatus == HEADER_NOT_PRESENT) {
+      /* Use the old header for this frame */
+      hSbrElement->useHeaderSlot[hSbrElement->useFrameSlot] = lastHdrSlot;
+    } else {
+      /* Use the new header for this frame */
+      hSbrElement->useHeaderSlot[hSbrElement->useFrameSlot] = thisHdrSlot;
+    }
+
+    /* Move frame pointer to the next slot which is up to be decoded/applied next */
+    hSbrElement->useFrameSlot = (hSbrElement->useFrameSlot+1) % (self->numDelayFrames+1);
+  }
+
+  *count -= startPos - FDKgetValidBits(hBs);
+
+  return errorStatus;
+}
+
+
+/**
+ * \brief Render one SBR element into time domain signal.
+ * \param self SBR decoder handle
+ * \param timeData pointer to output buffer
+ * \param interleaved flag indicating interleaved channel output
+ * \param channelMapping pointer to UCHAR array where next 2 channel offsets are stored. 
+ * \param elementIndex enumerating index of the SBR element to render.
+ * \param numInChannels number of channels from core coder (reading stride).
+ * \param numOutChannels pointer to a location to return number of output channels.
+ * \param psPossible flag indicating if PS is possible or not.
+ * \return SBRDEC_OK if successfull, else error code
+ */
+static SBR_ERROR
+sbrDecoder_DecodeElement (
+        HANDLE_SBRDECODER    self,
+        INT_PCM             *timeData,
+        const int            interleaved,
+        const UCHAR         *channelMapping,
+        const int            elementIndex,
+        const int            numInChannels,
+        int                 *numOutChannels,
+        const int            psPossible
+        )
+{
+  SBR_DECODER_ELEMENT *hSbrElement = self->pSbrElement[elementIndex];
+  HANDLE_SBR_CHANNEL    *pSbrChannel = self->pSbrElement[elementIndex]->pSbrChannel;
+  HANDLE_SBR_HEADER_DATA hSbrHeader = &self->sbrHeader[elementIndex][hSbrElement->useHeaderSlot[hSbrElement->useFrameSlot]];
+  HANDLE_PS_DEC h_ps_d = self->hParametricStereoDec;
+
+  /* get memory for frame data from scratch */
+  SBR_FRAME_DATA *hFrameDataLeft  = &hSbrElement->pSbrChannel[0]->frameData[hSbrElement->useFrameSlot];
+  SBR_FRAME_DATA *hFrameDataRight = &hSbrElement->pSbrChannel[1]->frameData[hSbrElement->useFrameSlot];
+
+  SBR_ERROR errorStatus = SBRDEC_OK;
+
+
+  INT  strideIn, strideOut, offset0, offset1;
+  INT  codecFrameSize = self->codecFrameSize;
+
+  int  stereo = (hSbrElement->elementID == ID_CPE) ? 1 : 0;
+  int  numElementChannels = hSbrElement->nChannels; /* Number of channels of the current SBR element */
+
+  /* Update the header error flag */
+  hSbrHeader->frameErrorFlag = hSbrElement->frameErrorFlag[hSbrElement->useFrameSlot];
+
+  /*
+     Prepare filterbank for upsampling if no valid bit stream data is available.
+   */
+  if ( hSbrHeader->syncState == SBR_NOT_INITIALIZED )
+  {
+    errorStatus = initHeaderData(
+            hSbrHeader,
+            self->sampleRateIn,
+            self->sampleRateOut,
+            codecFrameSize,
+            self->flags
+            );
+
+    hSbrHeader->syncState = UPSAMPLING;
+
+    errorStatus = sbrDecoder_HeaderUpdate(
+            self,
+            hSbrHeader,
+            HEADER_NOT_PRESENT,
+            pSbrChannel,
+            hSbrElement->nChannels
+            );
+  }
+
+  /* reset */
+  if (hSbrHeader->status & SBRDEC_HDR_STAT_RESET) {
+    int ch;
+    for (ch = 0 ; ch < numElementChannels; ch++) {
+      SBR_ERROR errorStatusTmp = SBRDEC_OK;
+
+      errorStatusTmp = resetSbrDec (
+             &pSbrChannel[ch]->SbrDec,
+              hSbrHeader,
+             &pSbrChannel[ch]->prevFrameData,
+              self->flags & SBRDEC_LOW_POWER,
+              self->synDownsampleFac
+              );
+
+      if (errorStatusTmp != SBRDEC_OK) {
+        errorStatus = errorStatusTmp;
+      }
+    }
+    hSbrHeader->status &= ~SBRDEC_HDR_STAT_RESET;
+  }
+
+  /* decoding */
+  if ( (hSbrHeader->syncState == SBR_ACTIVE)
+    || ((hSbrHeader->syncState == SBR_HEADER) && (hSbrHeader->frameErrorFlag == 0)) )
+  {
+    errorStatus = SBRDEC_OK;
+
+    decodeSbrData (hSbrHeader,
+                   hFrameDataLeft,
+                  &pSbrChannel[0]->prevFrameData,
+                   (stereo) ? hFrameDataRight : NULL,
+                   (stereo) ? &pSbrChannel[1]->prevFrameData : NULL);
+
+
+    /* Now we have a full parameter set and can do parameter
+       based concealment instead of plain upsampling. */
+    hSbrHeader->syncState = SBR_ACTIVE;
+  }
+
+  /* decode PS data if available */
+  if (h_ps_d != NULL && psPossible) {
+    int applyPs = 1;
+
+    /* define which frame delay line slot to process */
+    h_ps_d->processSlot = hSbrElement->useFrameSlot;
+
+    applyPs = DecodePs(h_ps_d, hSbrHeader->frameErrorFlag);
+    self->flags |= (applyPs) ? SBRDEC_PS_DECODED : 0;
+  }
+
+  /* Set strides for reading and writing */
+  if (interleaved) {
+    strideIn = numInChannels;
+    if ( psPossible )
+      strideOut = (numInChannels < 2) ? 2 : numInChannels;
+    else
+      strideOut = numInChannels;
+    offset0 = channelMapping[0];
+    offset1 = channelMapping[1];
+  } else {
+    strideIn  = 1;
+    strideOut = 1;
+    offset0 = channelMapping[0]*2*codecFrameSize;
+    offset1 = channelMapping[1]*2*codecFrameSize;
+  }
+
+  /* use same buffers for left and right channel and apply PS per timeslot */
+  /* Process left channel */
+//FDKprintf("self->codecFrameSize %d\t%d\n",self->codecFrameSize,self->sampleRateIn);
+  sbr_dec (&pSbrChannel[0]->SbrDec,
+            timeData + offset0,
+            timeData + offset0,
+           &pSbrChannel[1]->SbrDec,
+            timeData + offset1,
+            strideIn,
+            strideOut,
+            hSbrHeader,
+            hFrameDataLeft,
+           &pSbrChannel[0]->prevFrameData,
+            (hSbrHeader->syncState == SBR_ACTIVE),
+            h_ps_d,
+            self->flags
+          );
+
+  if (stereo) {
+    /* Process right channel */
+    sbr_dec (&pSbrChannel[1]->SbrDec,
+              timeData + offset1,
+              timeData + offset1,
+              NULL,
+              NULL,
+              strideIn,
+              strideOut,
+              hSbrHeader,
+              hFrameDataRight,
+             &pSbrChannel[1]->prevFrameData,
+              (hSbrHeader->syncState == SBR_ACTIVE),
+              NULL,
+              self->flags
+            );
+  }
+
+  if (h_ps_d != NULL) {
+    /* save PS status for next run */
+    h_ps_d->psDecodedPrv = (self->flags & SBRDEC_PS_DECODED) ? 1 : 0 ;
+  }
+
+  if ( psPossible 
+    )
+  {
+    FDK_ASSERT(strideOut > 1);
+    if ( !(self->flags & SBRDEC_PS_DECODED) ) {
+      /* A decoder which is able to decode PS has to produce a stereo output even if no PS data is availble. */
+      /* So copy left channel to right channel.                                                              */
+      if (interleaved) {
+        INT_PCM *ptr;
+        INT i;
+        FDK_ASSERT(strideOut == 2);
+
+        ptr = timeData;
+        for (i = codecFrameSize; i--; ) 
+        {
+          INT_PCM tmp; /* This temporal variable is required because some compilers can't do *ptr++ = *ptr++ correctly. */
+          tmp = *ptr++; *ptr++ = tmp;
+          tmp = *ptr++; *ptr++ = tmp;
+        }
+      } else {
+        FDKmemcpy( timeData+2*codecFrameSize, timeData, 2*codecFrameSize*sizeof(INT_PCM) );
+      }
+    }
+    *numOutChannels = 2;  /* Output minimum two channels when PS is enabled. */
+  }
+
+  return errorStatus;
+}
+
+
+SBR_ERROR sbrDecoder_Apply ( HANDLE_SBRDECODER   self,
+                             INT_PCM            *timeData,
+                             int                *numChannels,
+                             int                *sampleRate,
+                             const UCHAR         channelMapping[(6)],
+                             const int           interleaved,
+                             const int           coreDecodedOk,
+                             UCHAR              *psDecoded )
+{
+  SBR_ERROR errorStatus = SBRDEC_OK;
+
+  int   psPossible = 0;
+  int   sbrElementNum;
+  int   numCoreChannels = *numChannels;
+  int   numSbrChannels  = 0;
+
+  psPossible = *psDecoded;
+
+  /* Sanity check of allocated SBR elements. */
+  for (sbrElementNum=0; sbrElementNum<self->numSbrElements; sbrElementNum++) {
+    if (self->pSbrElement[sbrElementNum] == NULL) {
+      return SBRDEC_CREATE_ERROR;
+    }
+  }
+
+  if (self->numSbrElements != 1 || self->pSbrElement[0]->elementID != ID_SCE) {
+    psPossible = 0;
+  }
+
+
+  /* In case of non-interleaved time domain data and upsampling, make room for bigger SBR output. */
+  if (self->synDownsampleFac == 1 && interleaved == 0) {
+    int c, outputFrameSize;
+
+    outputFrameSize =
+            self->pSbrElement[0]->pSbrChannel[0]->SbrDec.SynthesisQMF.no_channels
+            * self->pSbrElement[0]->pSbrChannel[0]->SbrDec.SynthesisQMF.no_col;
+
+    for (c=numCoreChannels-1; c>0; c--) {
+      FDKmemmove(timeData + c*outputFrameSize, timeData + c*self->codecFrameSize , self->codecFrameSize*sizeof(INT_PCM));
+    }
+  }
+
+
+  /* Make sure that even if no SBR data was found/parsed *psDecoded is returned 1 if psPossible was 0. */
+  if (psPossible == 0) {
+    self->flags &= ~SBRDEC_PS_DECODED;
+  }
+
+  /* Loop over SBR elements */
+  for (sbrElementNum = 0; sbrElementNum<self->numSbrElements; sbrElementNum++)
+  {
+    int numElementChan;
+
+    if (psPossible && self->pSbrElement[sbrElementNum]->pSbrChannel[1] == NULL) {
+      errorStatus = SBRDEC_UNSUPPORTED_CONFIG;
+      goto bail;
+    }
+
+    numElementChan = (self->pSbrElement[sbrElementNum]->elementID == ID_CPE) ? 2 : 1;
+
+    /* If core signal is bad then force upsampling */
+    if ( ! coreDecodedOk ) {
+      self->pSbrElement[sbrElementNum]->frameErrorFlag[self->pSbrElement[sbrElementNum]->useFrameSlot] = 1;
+    }
+
+    errorStatus = sbrDecoder_DecodeElement (
+                                 self,
+                                 timeData,
+                                 interleaved,
+                                 channelMapping,
+                                 sbrElementNum,
+                                 numCoreChannels,
+                                &numElementChan,
+                                 psPossible
+                               );
+
+    if (errorStatus != SBRDEC_OK) {
+      goto bail;
+    }
+
+    numSbrChannels += numElementChan;
+    channelMapping += numElementChan;
+
+    if (numSbrChannels >= numCoreChannels) {
+      break;
+    }
+  }
+
+  /* Update numChannels and samplerate */
+  *numChannels = numSbrChannels;
+  *sampleRate = self->sampleRateOut;
+  *psDecoded = (self->flags & SBRDEC_PS_DECODED) ? 1 : 0;
+
+
+
+bail:
+
+  return errorStatus;
+}
+
+
+SBR_ERROR sbrDecoder_Close ( HANDLE_SBRDECODER *pSelf )
+{
+  HANDLE_SBRDECODER self = *pSelf;
+  int i;
+
+  if (self != NULL)
+  {
+    if (self->hParametricStereoDec != NULL) {
+      DeletePsDec ( &self->hParametricStereoDec );
+    }
+
+    if (self->workBuffer1 != NULL) {
+      FreeRam_SbrDecWorkBuffer1(&self->workBuffer1);
+    }
+    if (self->workBuffer2 != NULL) {
+      FreeRam_SbrDecWorkBuffer2(&self->workBuffer2);
+    }
+
+    for (i = 0; i < (4); i++) {
+      sbrDecoder_DestroyElement( self, i );
+    }
+
+    FreeRam_SbrDecoder(pSelf);
+  }
+
+  return SBRDEC_OK;
+}
+
+
+INT sbrDecoder_GetLibInfo( LIB_INFO *info )
+{
+  int i;
+
+  if (info == NULL) {
+    return -1;
+  }
+
+  /* search for next free tab */
+  for (i = 0; i < FDK_MODULE_LAST; i++) {
+    if (info[i].module_id == FDK_NONE)
+      break;
+  }
+  if (i == FDK_MODULE_LAST)
+    return -1;
+  info += i;
+
+  info->module_id = FDK_SBRDEC;
+  info->version = LIB_VERSION(SBRDECODER_LIB_VL0, SBRDECODER_LIB_VL1, SBRDECODER_LIB_VL2);
+  LIB_VERSION_STRING(info);
+  info->build_date = (char *)SBRDECODER_LIB_BUILD_DATE;
+  info->build_time = (char *)SBRDECODER_LIB_BUILD_TIME;
+  info->title      = (char *)SBRDECODER_LIB_TITLE;
+
+  /* Set flags */
+  info->flags = 0
+    | CAPF_SBR_HQ
+    | CAPF_SBR_LP
+    | CAPF_SBR_PS_MPEG
+    | CAPF_SBR_CONCEALMENT
+    | CAPF_SBR_DRC
+      ;
+  /* End of flags */
+
+  return 0;
+}
+