From 9bf37cc9712506b2483650c82d3c41152337ef7e Mon Sep 17 00:00:00 2001 From: Dave Burke Date: Tue, 17 Apr 2012 09:51:45 -0700 Subject: Fraunhofer AAC codec. License boilerplate update to follow. Change-Id: I2810460c11a58b6d148d84673cc031f3685e79b5 --- libMpegTPDec/include/tpdec_lib.h | 430 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 430 insertions(+) create mode 100644 libMpegTPDec/include/tpdec_lib.h (limited to 'libMpegTPDec/include/tpdec_lib.h') diff --git a/libMpegTPDec/include/tpdec_lib.h b/libMpegTPDec/include/tpdec_lib.h new file mode 100644 index 0000000..f32f6d8 --- /dev/null +++ b/libMpegTPDec/include/tpdec_lib.h @@ -0,0 +1,430 @@ +/************************** MPEG-4 Transport Decoder *********************** + + (C) Copyright Fraunhofer IIS (2006) + All Rights Reserved + + Please be advised that this software and/or program delivery is + Confidential Information of Fraunhofer and subject to and covered by the + + Fraunhofer IIS Software Evaluation Agreement + between Google Inc. and Fraunhofer + effective and in full force since March 1, 2012. + + You may use this software and/or program only under the terms and + conditions described in the above mentioned Fraunhofer IIS Software + Evaluation Agreement. Any other and/or further use requires a separate agreement. + + + $Id$ + Author(s): Manuel Jander + Description: MPEG Transport decoder + + This software and/or program is protected by copyright law and international + treaties. Any reproduction or distribution of this software and/or program, + or any portion of it, may result in severe civil and criminal penalties, and + will be prosecuted to the maximum extent possible under law. + +******************************************************************************/ + +#ifndef __TPDEC_LIB_H__ +#define __TPDEC_LIB_H__ + +#include "tp_data.h" + +#include "FDK_bitstream.h" + +#define TRANSPORTDEC_INBUF_SIZE ( 8192 ) /*!< Size is in bytes. + Set the transport input buffer size carefully and + assure that it fulfills the requirements of the + supported transport format(s). */ + +typedef enum { + TRANSPORTDEC_OK = 0, /*!< All fine. */ + + /* Synchronization errors. Wait for new input data and try again. */ + tpdec_sync_error_start = 0x100, + TRANSPORTDEC_NOT_ENOUGH_BITS, /*!< Out of bits. Provide more bits and try again. */ + TRANSPORTDEC_SYNC_ERROR, /*!< No sync was found or sync got lost. Keep trying. */ + tpdec_sync_error_end, + + /* Decode errors. Mostly caused due to bit errors. */ + tpdec_decode_error_start = 0x400, + TRANSPORTDEC_PARSE_ERROR, /*!< Bitstream data showed inconsistencies (wrong syntax). */ + TRANSPORTDEC_UNSUPPORTED_FORMAT, /*!< Unsupported format or feature found in the bitstream data. */ + TRANSPORTDEC_CRC_ERROR, /*!< CRC error encountered in bitstream data. */ + tpdec_decode_error_end, + + /* Fatal errors. Stop immediately on one of these errors! */ + tpdec_fatal_error_start = 0x200, + TRANSPORTDEC_UNKOWN_ERROR, /*!< An unknown error occured. */ + TRANSPORTDEC_INVALID_PARAMETER, /*!< An invalid parameter was passed to a function. */ + TRANSPORTDEC_NEED_TO_RESTART, /*!< The decoder needs to be restarted, since the requiered + configuration change cannot be performed. */ + tpdec_fatal_error_end + +} TRANSPORTDEC_ERROR; + + +/** Macro to identify decode errors. */ +#define TPDEC_IS_DECODE_ERROR(err) ( ((err>=tpdec_decode_error_start) && (err<=tpdec_decode_error_end)) ? 1 : 0) +/** Macro to identify fatal errors. */ +#define TPDEC_IS_FATAL_ERROR(err) ( ((err>=tpdec_fatal_error_start) && (err<=tpdec_fatal_error_end)) ? 1 : 0) + + +/** + * \brief Parameter identifiers for transportDec_SetParam() + */ +typedef enum { + TPDEC_PARAM_MINIMIZE_DELAY = 1, /** Delay minimization strategy. 0: none, 1: discard as many frames as possible. */ + TPDEC_PARAM_EARLY_CONFIG, /** Enable early config discovery. */ + TPDEC_PARAM_IGNORE_BUFFERFULLNESS, /** Ignore buffer fullness. */ + TPDEC_PARAM_SET_BITRATE, /** Set average bit rate for bit stream interruption frame misses estimation. */ + TPDEC_PARAM_RESET, /** Reset transport decoder instance status. */ + TPDEC_PARAM_BURST_PERIOD /** Set data reception burst period in mili seconds. */ +} TPDEC_PARAM; + +/* ISO/IEC 14496-3 4.4.1.1 Table 4.2 Program config element */ +#define PC_FSB_CHANNELS_MAX 16 /* Front/Side/Back channels */ +#define PC_LFE_CHANNELS_MAX 4 +#define PC_ASSOCDATA_MAX 8 +#define PC_CCEL_MAX 16 /* CC elements */ +#define PC_COMMENTLENGTH 256 + + +/*! + \brief Reset Program Config Element. + \param pPce Program Config Element structure. + \return void +*/ +void CProgramConfig_Reset ( CProgramConfig *pPce ); + +/*! + \brief Initialize Program Config Element. + \param pPce Program Config Element structure. + \return void +*/ +void CProgramConfig_Init ( CProgramConfig *pPce ); + +/*! + \brief Inquire state of present Program Config Element structure. + \param pPce Program Config Element structure. + \return 1 if the PCE structure is filled correct, + 0 if no valid PCE present. +*/ +int CProgramConfig_IsValid ( const CProgramConfig *pPce ); + +#ifdef TP_PCE_ENABLE +/*! + \brief Read Program Config Element. + \param pPce Program Config Element structure. + \param bs Bitstream buffer to read from. + \param alignAnchor Align bitstream to alignAnchor bits after all read operations. + \return void +*/ +void CProgramConfig_Read ( CProgramConfig *pPce, + HANDLE_FDK_BITSTREAM bs, + UINT alignAnchor ); +#endif /* TP_PCE_ENABLE */ + +/** + * \brief Lookup and verify a given element. The decoder calls this + * method with every new element ID found in the bitstream. + * + * \param pPce A valid Program config structure. + * \param tag Tag of the current element to be looked up. + * \param channelIdx The current channel count of the decoder parser. + * \param chMapping Array to store the canonical channel mapping indexes. + * \param chType Array to store the audio channel type. + * \param chIndex Array to store the individual audio channel type index. + * \param elMapping Pointer where the canonical element index is stored. + * \param elType The element id of the current element to be looked up. + * + * \return Non-zero if the element belongs to the current program, zero + * if it does not. + */ +int CProgramConfig_LookupElement( + CProgramConfig *pPce, + const UINT channelConfig, + const UINT tag, + const UINT channelIdx, + UCHAR chMapping[], + AUDIO_CHANNEL_TYPE chType[], + UCHAR chIndex[], + UCHAR *elMapping, + MP4_ELEMENT_ID elList[], + MP4_ELEMENT_ID elType + ); + +/** + * \brief Get table of elements in canonical order. + * \param pPce A valid program config structure. + * \param table An array where the element IDs are stored. + * \return Total element count including all SCE, CPE and LFE. + */ +int CProgramConfig_GetElementTable( const CProgramConfig *pPce, + MP4_ELEMENT_ID table[] ); + +/** + * \brief Initialize a given AudioSpecificConfig structure. + * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. + * \return void + */ +void AudioSpecificConfig_Init(CSAudioSpecificConfig *pAsc); + +/** + * \brief Parse a AudioSpecificConfig from a given bitstream handle. + * + * \param pAsc A pointer to an allocated CSAudioSpecificConfig struct. + * \param hBs Bitstream handle. + * \param fExplicitBackwardCompatible Do explicit backward compatibility parsing if set (flag). + * \param cb pointer to structure holding callback information + * + * \return Total element count including all SCE, CPE and LFE. + */ +TRANSPORTDEC_ERROR AudioSpecificConfig_Parse( + CSAudioSpecificConfig *pAsc, + HANDLE_FDK_BITSTREAM hBs, + int fExplicitBackwardCompatible, + CSTpCallBacks *cb + ); + +/* CELP stuff */ +enum { + MPE = 0, + RPE = 1, + fs8KHz = 0, + fs16KHz = 1 +}; + +/* Defintion of flags that can be passed to transportDecOpen() */ +#define TP_FLAG_MPEG4 1 + +/* Capability flags */ +#define CAPF_TPDEC_ADIF 0x00001000 /**< Flag indicating support for ADIF transport format. */ +#define CAPF_TPDEC_ADTS 0x00002000 /**< Flag indicating support for ADTS transport format. */ +#define CAPF_TPDEC_LOAS 0x00004000 /**< Flag indicating support for LOAS transport format. */ +#define CAPF_TPDEC_LATM 0x00008000 /**< Flag indicating support for LATM transport format. */ +#define CAPF_TPDEC_RAWPACKETS 0x00010000 /**< Flag indicating support for raw packets transport format. */ + +typedef struct TRANSPORTDEC *HANDLE_TRANSPORTDEC; + + +/** + * \brief Configure Transport Decoder via a binary coded AudioSpecificConfig or StreamMuxConfig. + * The previously requested configuration callback will be called as well. The buffer conf + * must containt a SMC in case of LOAS/LATM transport format, and an ASC elseways. + * + * \param hTp Handle of a transport decoder. + * \param conf UCHAR buffer of the binary coded config (ASC or SMC). + * \param length The length in bytes of the conf buffer. + * + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_OutOfBandConfig( const HANDLE_TRANSPORTDEC hTp, + UCHAR *conf, + const UINT length, + const UINT layer ); + +/** + * \brief Open Transport medium for reading. + * + * \param transportDecFmt Format of the transport decoder medium to be accessed. + * \param flags Transport decoder flags. Currently only TP_FLAG_MPEG4, which signals a + * MPEG4 capable decoder (relevant for ADTS only). + * + * \return A pointer to a valid and allocated HANDLE_TRANSPORTDEC or a null pointer on failure. + */ +HANDLE_TRANSPORTDEC transportDec_Open( TRANSPORT_TYPE transportDecFmt, + const UINT flags ); + +/** + * \brief Register configuration change callback. + * \param hTp Handle of transport decoder. + * \param cbUpdateConfig Pointer to a callback function to handle audio config changes. + * \param user_data void pointer for user data passed to the callback as first parameter. + * \return 0 on success. + */ +int transportDec_RegisterAscCallback ( + HANDLE_TRANSPORTDEC hTp, + const cbUpdateConfig_t cbUpdateConfig, + void* user_data ); + +/** + * \brief Register SSC parser callback. + * \param hTp Handle of transport decoder. + * \param cbUpdateConfig Pointer to a callback function to handle SSC parsing. + * \param user_data void pointer for user data passed to the callback as first parameter. + * \return 0 on success. + */ +int transportDec_RegisterSscCallback ( + HANDLE_TRANSPORTDEC hTp, + const cbSsc_t cbSscParse, + void* user_data ); + +/** + * \brief Register SBR header parser callback. + * \param hTp Handle of transport decoder. + * \param cbUpdateConfig Pointer to a callback function to handle SBR header parsing. + * \param user_data void pointer for user data passed to the callback as first parameter. + * \return 0 on success. + */ +int transportDec_RegisterSbrCallback( HANDLE_TRANSPORTDEC hTpDec, const cbSbr_t cbSbr, void* user_data); + +/** + * \brief Fill internal input buffer with bitstream data from the external input buffer. + * The function only copies such data as long as the decoder-internal input buffer is not full. + * So it grabs whatever it can from pBuffer and returns information (bytesValid) so that at a + * subsequent call of %transportDec_FillData(), the right position in pBuffer can be determined to + * grab the next data. + * + * \param hTp Handle of transportDec. + * \param pBuffer Pointer to external input buffer. + * \param bufferSize Size of external input buffer. This argument is required because decoder-internally + * we need the information to calculate the offset to pBuffer, where the next + * available data is, which is then fed into the decoder-internal buffer (as much + * as possible). Our example framework implementation fills the buffer at pBuffer + * again, once it contains no available valid bytes anymore (meaning bytesValid equal 0). + * \param bytesValid Number of bitstream bytes in the external bitstream buffer that have not yet been + * copied into the decoder's internal bitstream buffer by calling this function. + * The value is updated according to the amount of newly copied bytes. + * \param layer The layer the bitstream belongs to. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_FillData( + const HANDLE_TRANSPORTDEC hTp, + UCHAR *pBuffer, + const UINT bufferSize, + UINT *pBytesValid, + const INT layer ); + +/** + * \brief Get transportDec bitstream handle. + * \param hTp Pointer to a transport decoder handle. + * \return HANDLE_FDK_BITSTREAM bitstream handle. + */ +HANDLE_FDK_BITSTREAM transportDec_GetBitstream ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); + +/** + * \brief Get transport format. + * \param hTp Pointer to a transport decoder handle. + * \return The transport format. + */ +TRANSPORT_TYPE transportDec_GetFormat ( const HANDLE_TRANSPORTDEC hTp ); + +/** + * \brief Get the current buffer fullness value. + * + * \param hTp Handle of a transport decoder. + * + * \return Buffer fullness + */ +INT transportDec_GetBufferFullness( const HANDLE_TRANSPORTDEC hTp ); + +/** + * \brief Close and deallocate transportDec. + * \param phTp Pointer to a previously allocated transport decoder handle. + * \return void + */ +void transportDec_Close ( HANDLE_TRANSPORTDEC *phTp ); + +/** + * \brief Read one access unit from the transportDec medium. + * \param hTp Handle of transportDec. + * \param length On return, this value is overwritten with the actual access unit length in bits. + * Set to -1 if length is unknown. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_ReadAccessUnit ( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); + +/** + * \brief Get the remaining amount of bits of the current access unit. The result + * can be below zero, meaning that too many bits have been read. + * \param hTp Handle of transportDec. + * \return amount of remaining bits. + */ +INT transportDec_GetAuBitsRemaining( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); + +/** + * \brief Get the total amount of bits of the current access unit. + * \param hTp Handle of transportDec. + * \return amount of total bits. + */ +INT transportDec_GetAuBitsTotal( const HANDLE_TRANSPORTDEC hTp, const UINT layer ); + +/** + * \brief This function is required to be called when the decoder has finished parsing + * one Access Unit for bitstream housekeeping. + * \param hTp Transport Handle. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_EndAccessUnit ( const HANDLE_TRANSPORTDEC hTp ); + +/** + * \brief Obtain the amount of missing access units if applicable in case of + * a bit stream synchronization error. Each time transportDec_ReadAccessUnit() + * returns TRANSPORTDEC_SYNC_ERROR this function can be called to retrieve an estimate + * of the amount of missing access units. This works only in case of constant average + * bit rate (has to be known) and if the parameter TPDEC_PARAM_SET_BITRATE has been set + * accordingly. + * \param hTp Transport Handle. + * \param pNAccessUnits pointer to a memory location where the estimated lost frame count will be stored into. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_GetMissingAccessUnitCount ( INT *pNAccessUnits, HANDLE_TRANSPORTDEC hTp ); + + +/** + * \brief Set a given setting. + * \param hTp Transport Handle. + * \param param Identifier of the parameter to be changed. + * \param value Value for the parameter to be changed. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_SetParam ( const HANDLE_TRANSPORTDEC hTp, + const TPDEC_PARAM param, + const INT value ); + +/** + * \brief Get number of subframes (for LATM or ADTS) + * \param hTp Transport Handle. + * \return Number of ADTS/LATM subframes (return 1 for all other transport types). + */ +UINT transportDec_GetNrOfSubFrames(HANDLE_TRANSPORTDEC hTp); + + +/** + * \brief Get info structure of transport decoder library. + * \param info A pointer to an allocated LIB_INFO struct. + * \return Error code. + */ +TRANSPORTDEC_ERROR transportDec_GetLibInfo( LIB_INFO *info ); + +/* ADTS CRC support */ + +/** + * \brief Set current bitstream position as start of a new data region. + * \param hTp Transport handle. + * \param mBits Size in bits of the data region. Set to 0 if it should not be of a fixed size. + * \return Data region ID, which should be used when calling transportDec_CrcEndReg(). + */ +int transportDec_CrcStartReg ( const HANDLE_TRANSPORTDEC hTp, + const INT mBits ); + +/** + * \brief Set end of data region. + * \param hTp Transport handle. + * \param reg Data region ID, opbtained from transportDec_CrcStartReg(). + * \return void + */ +void transportDec_CrcEndReg ( const HANDLE_TRANSPORTDEC hTp, + const INT reg ); + +/** + * \brief Calculate ADTS crc and check if it is correct. The ADTS checksum is held internally. + * \param hTp Transport handle. + * \return Return TRANSPORTDEC_OK if the CRC is ok, or error if CRC is not correct. + */ +TRANSPORTDEC_ERROR transportDec_CrcCheck ( const HANDLE_TRANSPORTDEC hTp ); + + +#endif /* #ifndef __TPDEC_LIB_H__ */ -- cgit v1.2.3