Fraunhofer AAC codec.

License boilerplate update to follow.

Change-Id: I2810460c11a58b6d148d84673cc031f3685e79b5

3 files changed, 839 insertions, 0 deletions

diff --git a/libMpegTPDec/include/mpegFileRead.h b/libMpegTPDec/include/mpegFileRead.h
new file mode 100644
index 0000000..c86b5f9
--- /dev/null
+++ b/libMpegTPDec/include/mpegFileRead.h
@@ -0,0 +1,132 @@
+/*****************************  MPEG-4 AAC Decoder  **************************
+
+                        (C) Copyright Fraunhofer IIS (2006)
+                               All Rights Reserved
+
+    Please be advised that this software and/or program delivery is
+    Confidential Information of Fraunhofer and subject to and covered by the
+
+    Fraunhofer IIS Software Evaluation Agreement
+    between Google Inc. and  Fraunhofer
+    effective and in full force since March 1, 2012.
+
+    You may use this software and/or program only under the terms and
+    conditions described in the above mentioned Fraunhofer IIS Software
+    Evaluation Agreement. Any other and/or further use requires a separate agreement.
+
+
+   $Id$
+   Author(s):   Manuel Jander
+   Description: Bitstream data provider for MP4 decoders
+
+   This software and/or program is protected by copyright law and international
+   treaties. Any reproduction or distribution of this software and/or program,
+   or any portion of it, may result in severe civil and criminal penalties, and
+   will be prosecuted to the maximum extent possible under law.
+
+******************************************************************************/
+
+#include "machine_type.h"
+#include "FDK_audio.h"
+
+#define MPFREAD_MP4FF_DISABLE
+
+#ifndef MPFREAD_MP4FF_DISABLE
+  /*!< If MPFREAD_MP4FF_ENABLE is set, include support for MPEG ISO fileformat.
+       If not set, no .mp4, .m4a and .3gp files can be used for input. */
+  #define MPFREAD_MP4FF_ENABLE
+#endif
+
+/* maximum number of layers which can be read        */
+/* shall equal max number of layers read by iisisoff */
+#define FILEREAD_MAX_LAYERS (2)
+
+typedef struct STRUCT_FILEREAD *HANDLE_FILEREAD;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief           Open an MPEG audio file and try to detect its format.
+ * \param filename  String of the filename to be opened.
+ * \param fileFormat Skip file format detection and use given format if fileFormat != FF_UNKNOWN.
+                    Else store detected format into *fileFmt.
+ * \param transportType Skip transport type detection and use given format if transportType != TT_UNKNOWN.
+                    Else store detected format into *fileFmt.
+ * \param conf      Pointer to unsigned char to hold the AudioSpecificConfig of the input file, if
+                    any (MPEG 4 file format). In case of RAW LATM it holds the StreamMuxConfig.
+ * \param confSize  Pointer to an integer, where the length of the ASC or SMC (in case of RAW LATM)
+                    is stored to.
+ * \return          MPEG file read handle.
+ */
+HANDLE_FILEREAD mpegFileRead_Open( const char     *filename,
+                                   FILE_FORMAT     fileFormat,
+                                   TRANSPORT_TYPE  transportType,
+                                   UCHAR          *conf[],
+                                   UINT            confSize[],
+                                   INT            *noOfLayers
+                                 );
+
+/**
+ * \brief           Get the file format of the input file.
+ * \param hDataSrc  MPEG file read handle.
+ * \return          File format of the input file.
+ */
+FILE_FORMAT mpegFileRead_GetFileFormat(HANDLE_FILEREAD hDataSrc);
+
+/**
+ * \brief           Get the transport type of the input file.
+ * \param hDataSrc  MPEG file read handle.
+ * \return          Transport type of the input file.
+ */
+TRANSPORT_TYPE mpegFileRead_GetTransportType(HANDLE_FILEREAD hDataSrc);
+
+/**
+ * \brief Read data from MPEG file. In case of packet file, read one packet, in case
+ *        of streaming file with embedded synchronisation layer (LOAS/ADTS...), just
+ *        fill the buffer.
+ *
+ * \param hMpegFile   MPEG file read handle.
+ * \param inBuffer    Pointer to input buffer.
+ * \param bufferSize  Size of input buffer.
+ * \param bytesValid  Number of bytes that were read.
+ * \return            0 on success, -1 if unsupported file format or file read error.
+ */
+int mpegFileRead_Read( HANDLE_FILEREAD   hMpegFile,
+                       UCHAR            *inBuffer[],
+                       UINT              bufferSize,
+                       UINT             *bytesValid
+                     );
+
+/**
+ * \brief            Seek in file from origin by given offset in frames.
+ * \param hMpegFile  MPEG file read handle.
+ * \param origin     If 0, the origin is the file beginning (absolute seek).
+ *                   If 1, the origin is the current position (relative seek).
+ * \param offset     The amount of frames to seek from the given origin.
+ * \return           0 on sucess, -1 if offset < 0 or file read error.
+ */
+int mpegFileRead_seek( HANDLE_FILEREAD   hMpegFile,
+                       INT               origin,
+                       INT               offset
+                      );
+
+/**
+ * \brief            Get file position in percent.
+ * \param hMpegFile  MPEG file read handle.
+ * \return           File position in percent.
+ */
+int mpegFileRead_getPercent(HANDLE_FILEREAD hMpegFile);
+
+
+/**
+ * \brief           Close MPEG audio file.
+ * \param hMpegFile Mpeg file read handle.
+ * \return          0 on sucess.
+ */
+int mpegFileRead_Close(HANDLE_FILEREAD *hMpegFile);
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/libMpegTPDec/include/tp_data.h b/libMpegTPDec/include/tp_data.h
new file mode 100644
index 0000000..6149608
--- /dev/null
+++ b/libMpegTPDec/include/tp_data.h
@@ -0,0 +1,277 @@
+/*****************************  MPEG-4 AAC Decoder  **************************
+
+                        (C) Copyright Fraunhofer IIS (2004)
+                               All Rights Reserved
+
+    Please be advised that this software and/or program delivery is
+    Confidential Information of Fraunhofer and subject to and covered by the
+
+    Fraunhofer IIS Software Evaluation Agreement
+    between Google Inc. and  Fraunhofer
+    effective and in full force since March 1, 2012.
+
+    You may use this software and/or program only under the terms and
+    conditions described in the above mentioned Fraunhofer IIS Software
+    Evaluation Agreement. Any other and/or further use requires a separate agreement.
+
+
+   $Id$
+   Author(s): Manuel Jander
+   Description: MPEG Transport data tables
+
+   This software and/or program is protected by copyright law and international
+   treaties. Any reproduction or distribution of this software and/or program,
+   or any portion of it, may result in severe civil and criminal penalties, and
+   will be prosecuted to the maximum extent possible under law.
+
+******************************************************************************/
+#ifndef __TP_DATA_H__
+#define __TP_DATA_H__
+
+#include "machine_type.h"
+#include "FDK_audio.h"
+#include "FDK_bitstream.h"
+
+/*
+ * Configuration
+ */
+#define TP_GA_ENABLE
+/* #define TP_CELP_ENABLE */
+/* #define TP_HVXC_ENABLE */
+/* #define TP_SLS_ENABLE */
+#define TP_ELD_ENABLE
+/* #define TP_USAC_ENABLE */
+/* #define TP_RSVD50_ENABLE */
+
+#if defined(TP_GA_ENABLE) || defined(TP_SLS_ENABLE)
+#define TP_PCE_ENABLE       /**< Enable full PCE support */
+#endif
+
+/**
+ * ProgramConfig struct.
+ */
+/* ISO/IEC 14496-3 4.4.1.1 Table 4.2 Program config element */
+#define PC_FSB_CHANNELS_MAX 16 /* Front/Side/Back channels */
+#define PC_LFE_CHANNELS_MAX 4
+#define PC_ASSOCDATA_MAX    8
+#define PC_CCEL_MAX         16 /* CC elements */
+#define PC_COMMENTLENGTH    256
+
+typedef struct
+{
+#ifdef TP_PCE_ENABLE
+  /* PCE bitstream elements: */
+  UCHAR ElementInstanceTag;
+  UCHAR Profile;
+  UCHAR SamplingFrequencyIndex;
+  UCHAR NumFrontChannelElements;
+  UCHAR NumSideChannelElements;
+  UCHAR NumBackChannelElements;
+  UCHAR NumLfeChannelElements;
+  UCHAR NumAssocDataElements;
+  UCHAR NumValidCcElements;
+
+  UCHAR MonoMixdownPresent;
+  UCHAR MonoMixdownElementNumber;
+
+  UCHAR StereoMixdownPresent;
+  UCHAR StereoMixdownElementNumber;
+
+  UCHAR MatrixMixdownIndexPresent;
+  UCHAR MatrixMixdownIndex;
+  UCHAR PseudoSurroundEnable;
+
+  UCHAR FrontElementIsCpe[PC_FSB_CHANNELS_MAX];
+  UCHAR FrontElementTagSelect[PC_FSB_CHANNELS_MAX];
+
+  UCHAR SideElementIsCpe[PC_FSB_CHANNELS_MAX];
+  UCHAR SideElementTagSelect[PC_FSB_CHANNELS_MAX];
+
+  UCHAR BackElementIsCpe[PC_FSB_CHANNELS_MAX];
+  UCHAR BackElementTagSelect[PC_FSB_CHANNELS_MAX];
+
+  UCHAR LfeElementTagSelect[PC_LFE_CHANNELS_MAX];
+
+  UCHAR AssocDataElementTagSelect[PC_ASSOCDATA_MAX];
+
+  UCHAR CcElementIsIndSw[PC_CCEL_MAX];
+  UCHAR ValidCcElementTagSelect[PC_CCEL_MAX];
+
+  UCHAR CommentFieldBytes;
+  UCHAR Comment[PC_COMMENTLENGTH];
+#endif /* TP_PCE_ENABLE */
+
+  /* Helper variables for administration: */
+  UCHAR isValid;               /*!< Flag showing if PCE has been read successfully. */
+  UCHAR NumChannels;           /*!< Amount of audio channels summing all channel elements including LFEs */
+  UCHAR NumEffectiveChannels;  /*!< Amount of audio channels summing only SCEs and CPEs */
+  UCHAR elCounter;
+
+} CProgramConfig;
+
+typedef enum {
+  ASCEXT_UNKOWN = -1,
+  ASCEXT_SBR    = 0x2b7,
+  ASCEXT_PS     = 0x548,
+  ASCEXT_MPS    = 0x76a,
+  ASCEXT_SAOC   = 0x7cb,
+  ASCEXT_LDMPS  = 0x7cc
+
+} TP_ASC_EXTENSION_ID;
+
+#ifdef TP_GA_ENABLE
+/**
+ * GaSpecificConfig struct
+ */
+typedef struct {
+  UINT m_frameLengthFlag ;
+  UINT m_dependsOnCoreCoder ;
+  UINT m_coreCoderDelay ;
+
+  UINT m_extensionFlag ;
+  UINT m_extensionFlag3 ;
+
+  UINT m_layer;
+  UINT m_numOfSubFrame;
+  UINT m_layerLength;
+
+} CSGaSpecificConfig;
+#endif /* TP_GA_ENABLE */
+
+
+
+
+#ifdef TP_ELD_ENABLE
+
+typedef enum {
+  ELDEXT_TERM  = 0x0,   /* Termination tag */
+  ELDEXT_SAOC  = 0x1,   /* SAOC config */
+  ELDEXT_LDSAC = 0x2    /* LD MPEG Surround config */
+  /* reserved */
+} ASC_ELD_EXT_TYPE;
+
+typedef struct {
+  UCHAR m_frameLengthFlag;
+
+  UCHAR m_sbrPresentFlag;
+  UCHAR m_useLdQmfTimeAlign;  /* Use LD-MPS QMF in SBR to achive time alignment */
+  UCHAR m_sbrSamplingRate;
+  UCHAR m_sbrCrcFlag;
+
+} CSEldSpecificConfig;
+#endif /* TP_ELD_ENABLE */
+
+
+
+
+/**
+ * Audio configuration struct, suitable for encoder and decoder configuration.
+ */
+typedef struct {
+
+  /* XYZ Specific Data */
+  union {
+#ifdef TP_GA_ENABLE
+    CSGaSpecificConfig    m_gaSpecificConfig;       /**< General audio specific configuration.         */
+#endif /* TP_GA_ENABLE */
+#ifdef TP_ELD_ENABLE
+    CSEldSpecificConfig   m_eldSpecificConfig;      /**< ELD specific configuration.                   */
+#endif /* TP_ELD_ENABLE */
+  } m_sc;
+  
+  /* Common ASC parameters */
+#ifdef TP_PCE_ENABLE
+  CProgramConfig        m_progrConfigElement;     /**< Program configuration.                          */
+#endif /* TP_PCE_ENABLE */
+
+  AUDIO_OBJECT_TYPE     m_aot;                    /**< Audio Object Type.                              */
+  UINT                  m_samplingFrequency;      /**< Samplerate.                                     */
+  UINT                  m_samplesPerFrame;        /**< Amount of samples per frame.                    */
+  UINT                  m_directMapping;          /**< Document this please !!                         */
+
+  AUDIO_OBJECT_TYPE     m_extensionAudioObjectType;        /**< Audio object type                      */
+  UINT                  m_extensionSamplingFrequency;      /**< Samplerate                             */  
+
+  SCHAR                 m_channelConfiguration;   /**< Channel configuration index                     */
+
+  SCHAR                 m_epConfig;               /**< Error protection index                           */
+  SCHAR                 m_vcb11Flag;              /**< aacSectionDataResilienceFlag                     */
+  SCHAR                 m_rvlcFlag;               /**< aacScalefactorDataResilienceFlag                 */
+  SCHAR                 m_hcrFlag;                /**< aacSpectralDataResilienceFlag                    */
+
+  SCHAR                 m_sbrPresentFlag;         /**< Flag indicating the presence of SBR data in the bitstream               */
+  SCHAR                 m_psPresentFlag;          /**< Flag indicating the presence of parametric stereo data in the bitstream */
+  UCHAR                 m_samplingFrequencyIndex; /**< Samplerate index                                 */
+  UCHAR                 m_extensionSamplingFrequencyIndex; /**< Samplerate index                        */
+  SCHAR                 m_extensionChannelConfiguration;   /**< Channel configuration index             */
+
+} CSAudioSpecificConfig;
+
+typedef INT (*cbUpdateConfig_t)(void*, const CSAudioSpecificConfig*);
+typedef INT (*cbSsc_t)(
+        void*, HANDLE_FDK_BITSTREAM,
+        const AUDIO_OBJECT_TYPE coreCodec,
+        const INT samplingFrequency,
+        const INT muxMode,
+        const INT configBytes
+        );
+typedef INT (*cbSbr_t)(
+        void *                  self,
+        HANDLE_FDK_BITSTREAM    hBs,
+        const INT sampleRateIn,
+        const INT sampleRateOut,
+        const INT samplesPerFrame,
+        const AUDIO_OBJECT_TYPE coreCodec,
+        const MP4_ELEMENT_ID    elementID,
+        const INT               elementIndex
+        );
+
+typedef struct  {
+  cbUpdateConfig_t cbUpdateConfig; /*!< Function pointer for Config change notify callback.  */
+  void *cbUpdateConfigData;        /*!< User data pointer for Config change notify callback. */
+  cbSsc_t cbSsc;                   /*!< Function pointer for SSC parser callback. */
+  void *cbSscData;                 /*!< User data pointer for SSC parser callback. */
+  cbSbr_t cbSbr;                   /*!< Function pointer for SBR header parser callback. */
+  void *cbSbrData;                 /*!< User data pointer for SBR header parser callback. */
+} CSTpCallBacks;
+
+static const UINT SamplingRateTable[] = 
+{ 96000, 88200, 64000, 48000, 44100, 32000, 24000, 22050, 16000, 12000, 11025, 8000, 7350, 0, 0,
+  0
+};
+
+static inline
+int getSamplingRateIndex( UINT samplingRate )
+{
+  UINT sf_index, tableSize=sizeof(SamplingRateTable)/sizeof(UINT);
+
+  for (sf_index=0; sf_index<tableSize; sf_index++) {
+    if( SamplingRateTable[sf_index] == samplingRate ) break;
+  }
+
+  if (sf_index>tableSize-1) {
+    return tableSize-1;
+  }
+
+  return sf_index;
+}
+
+/*
+ * Get Channel count from channel configuration
+ */
+static inline int getNumberOfTotalChannels(int channelConfig)
+{
+  if (channelConfig > 0 && channelConfig < 8)
+    return (channelConfig == 7)?8:channelConfig;
+  else
+    return 0;
+}
+
+static inline
+int getNumberOfEffectiveChannels(const int channelConfig)
+{
+  const int n[] = {0,1,2,3,4,5,5,7};
+  return n[channelConfig];
+}
+
+#endif /* __TP_DATA_H__ */
diff --git a/libMpegTPDec/include/tpdec_lib.h b/libMpegTPDec/include/tpdec_lib.h
new file mode 100644
index 0000000..f32f6d8
--- /dev/null
+++ b/libMpegTPDec/include/tpdec_lib.h
@@ -0,0 +1,430 @@
+/**************************  MPEG-4 Transport Decoder  ***********************
+
+                        (C) Copyright Fraunhofer IIS (2006)
+                               All Rights Reserved
+
+    Please be advised that this software and/or program delivery is
+    Confidential Information of Fraunhofer and subject to and covered by the
+
+    Fraunhofer IIS Software Evaluation Agreement
+    between Google Inc. and  Fraunhofer
+    effective and in full force since March 1, 2012.
+
+    You may use this software and/or program only under the terms and
+    conditions described in the above mentioned Fraunhofer IIS Software
+    Evaluation Agreement. Any other and/or further use requires a separate agreement.
+
+
+   $Id$
+   Author(s): Manuel Jander
+   Description: MPEG Transport decoder
+
+   This software and/or program is protected by copyright law and international
+   treaties. Any reproduction or distribution of this software and/or program,
+   or any portion of it, may result in severe civil and criminal penalties, and
+   will be prosecuted to the maximum extent possible under law.
+
+******************************************************************************/
+
+#ifndef __TPDEC_LIB_H__
+#define __TPDEC_LIB_H__
+
+#include "tp_data.h"
+
+#include "FDK_bitstream.h"
+
+#define TRANSPORTDEC_INBUF_SIZE  ( 8192 )   /*!< Size is in bytes.
+                                                 Set the transport input buffer size carefully and
+                                                 assure that it fulfills the requirements of the
+                                                 supported transport format(s).                    */
+
+typedef enum {
+  TRANSPORTDEC_OK = 0,             /*!< All fine.                                                  */
+
+  /* Synchronization errors. Wait for new input data and try again. */
+  tpdec_sync_error_start   = 0x100,
+  TRANSPORTDEC_NOT_ENOUGH_BITS,    /*!< Out of bits. Provide more bits and try again.              */
+  TRANSPORTDEC_SYNC_ERROR,         /*!< No sync was found or sync got lost. Keep trying.           */
+  tpdec_sync_error_end,
+
+  /* Decode errors. Mostly caused due to bit errors. */
+  tpdec_decode_error_start = 0x400,
+  TRANSPORTDEC_PARSE_ERROR,        /*!< Bitstream data showed inconsistencies (wrong syntax).      */
+  TRANSPORTDEC_UNSUPPORTED_FORMAT, /*!< Unsupported format or feature found in the bitstream data. */
+  TRANSPORTDEC_CRC_ERROR,          /*!< CRC error encountered in bitstream data.                   */
+  tpdec_decode_error_end,
+
+  /* Fatal errors. Stop immediately on one of these errors! */
+  tpdec_fatal_error_start  = 0x200,
+  TRANSPORTDEC_UNKOWN_ERROR,       /*!< An unknown error occured.                                  */
+  TRANSPORTDEC_INVALID_PARAMETER,  /*!< An invalid parameter was passed to a function.             */
+  TRANSPORTDEC_NEED_TO_RESTART,    /*!< The decoder needs to be restarted, since the requiered
+                                        configuration change cannot be performed.                  */
+  tpdec_fatal_error_end
+
+} TRANSPORTDEC_ERROR;
+
+
+/** Macro to identify decode errors. */
+#define TPDEC_IS_DECODE_ERROR(err) ( ((err>=tpdec_decode_error_start) && (err<=tpdec_decode_error_end)) ? 1 : 0)
+/** Macro to identify fatal errors. */
+#define TPDEC_IS_FATAL_ERROR(err)  ( ((err>=tpdec_fatal_error_start)  && (err<=tpdec_fatal_error_end))  ? 1 : 0)
+
+
+/**
+ * \brief Parameter identifiers for transportDec_SetParam()
+ */
+typedef enum {
+  TPDEC_PARAM_MINIMIZE_DELAY = 1,        /** Delay minimization strategy. 0: none, 1: discard as many frames as possible. */
+  TPDEC_PARAM_EARLY_CONFIG,              /** Enable early config discovery. */
+  TPDEC_PARAM_IGNORE_BUFFERFULLNESS,     /** Ignore buffer fullness. */
+  TPDEC_PARAM_SET_BITRATE,               /** Set average bit rate for bit stream interruption frame misses estimation. */
+  TPDEC_PARAM_RESET,                     /** Reset transport decoder instance status. */
+  TPDEC_PARAM_BURST_PERIOD               /** Set data reception burst period in mili seconds. */
+} TPDEC_PARAM;
+
+/* ISO/IEC 14496-3 4.4.1.1 Table 4.2 Program config element */
+#define PC_FSB_CHANNELS_MAX 16 /* Front/Side/Back channels */
+#define PC_LFE_CHANNELS_MAX 4
+#define PC_ASSOCDATA_MAX    8
+#define PC_CCEL_MAX         16 /* CC elements */
+#define PC_COMMENTLENGTH    256
+
+
+/*!
+  \brief               Reset Program Config Element.
+  \param pPce          Program Config Element structure.
+  \return              void
+*/
+void  CProgramConfig_Reset ( CProgramConfig *pPce );
+
+/*!
+  \brief               Initialize Program Config Element.
+  \param pPce          Program Config Element structure.
+  \return              void
+*/
+void  CProgramConfig_Init ( CProgramConfig *pPce );
+
+/*!
+  \brief               Inquire state of present Program Config Element structure.
+  \param pPce          Program Config Element structure.
+  \return              1 if the PCE structure is filled correct,
+                       0 if no valid PCE present.
+*/
+int  CProgramConfig_IsValid ( const CProgramConfig *pPce );
+
+#ifdef TP_PCE_ENABLE
+/*!
+  \brief               Read Program Config Element.
+  \param pPce          Program Config Element structure.
+  \param bs            Bitstream buffer to read from.
+  \param alignAnchor   Align bitstream to alignAnchor bits after all read operations.
+  \return              void
+*/
+void  CProgramConfig_Read ( CProgramConfig       *pPce,
+                            HANDLE_FDK_BITSTREAM  bs,
+                            UINT                  alignAnchor );
+#endif /* TP_PCE_ENABLE */
+
+/**
+ * \brief Lookup and verify a given element. The decoder calls this
+ *        method with every new element ID found in the bitstream.
+ *
+ * \param pPce        A valid Program config structure.
+ * \param tag         Tag of the current element to be looked up.
+ * \param channelIdx  The current channel count of the decoder parser.
+ * \param chMapping   Array to store the canonical channel mapping indexes.
+ * \param chType      Array to store the audio channel type.
+ * \param chIndex     Array to store the individual audio channel type index.
+ * \param elMapping   Pointer where the canonical element index is stored.
+ * \param elType      The element id of the current element to be looked up.
+ *
+ * \return            Non-zero if the element belongs to the current program, zero
+ *                    if it does not.
+ */
+int CProgramConfig_LookupElement(
+        CProgramConfig *pPce,
+        const UINT      channelConfig,
+        const UINT      tag,
+        const UINT      channelIdx,
+        UCHAR           chMapping[],
+        AUDIO_CHANNEL_TYPE chType[],
+        UCHAR           chIndex[],
+        UCHAR          *elMapping,
+        MP4_ELEMENT_ID  elList[],
+        MP4_ELEMENT_ID  elType
+        );
+
+/**
+ * \brief        Get table of elements in canonical order.
+ * \param pPce   A valid program config structure.
+ * \param table  An array where the element IDs are stored.
+ * \return       Total element count including all SCE, CPE and LFE.
+ */
+int CProgramConfig_GetElementTable( const CProgramConfig *pPce,
+                                    MP4_ELEMENT_ID  table[] );
+
+/**
+ * \brief       Initialize a given AudioSpecificConfig structure.
+ * \param pAsc  A pointer to an allocated CSAudioSpecificConfig struct.
+ * \return      void
+ */
+void AudioSpecificConfig_Init(CSAudioSpecificConfig *pAsc);
+
+/**
+ * \brief   Parse a AudioSpecificConfig from a given bitstream handle.
+ *
+ * \param pAsc                         A pointer to an allocated CSAudioSpecificConfig struct.
+ * \param hBs                          Bitstream handle.
+ * \param fExplicitBackwardCompatible  Do explicit backward compatibility parsing if set (flag).
+ * \param cb pointer to structure holding callback information
+ *
+ * \return  Total element count including all SCE, CPE and LFE.
+ */
+TRANSPORTDEC_ERROR AudioSpecificConfig_Parse(
+        CSAudioSpecificConfig *pAsc,
+        HANDLE_FDK_BITSTREAM hBs,
+        int fExplicitBackwardCompatible,
+        CSTpCallBacks *cb
+        );
+
+/* CELP stuff */
+enum {
+  MPE     = 0,
+  RPE     = 1,
+  fs8KHz  = 0,
+  fs16KHz = 1
+};
+
+/* Defintion of flags that can be passed to transportDecOpen() */
+#define TP_FLAG_MPEG4 1
+
+/* Capability flags */
+#define CAPF_TPDEC_ADIF        0x00001000  /**< Flag indicating support for ADIF transport format.        */
+#define CAPF_TPDEC_ADTS        0x00002000  /**< Flag indicating support for ADTS transport format.        */
+#define CAPF_TPDEC_LOAS        0x00004000  /**< Flag indicating support for LOAS transport format.        */
+#define CAPF_TPDEC_LATM        0x00008000  /**< Flag indicating support for LATM transport format.        */
+#define CAPF_TPDEC_RAWPACKETS  0x00010000  /**< Flag indicating support for raw packets transport format. */
+
+typedef struct TRANSPORTDEC *HANDLE_TRANSPORTDEC;
+
+
+/**
+ * \brief Configure Transport Decoder via a binary coded AudioSpecificConfig or StreamMuxConfig.
+ *        The previously requested configuration callback will be called as well. The buffer conf
+ *        must containt a SMC in case of LOAS/LATM transport format, and an ASC elseways.
+ *
+ * \param hTp     Handle of a transport decoder.
+ * \param conf    UCHAR buffer of the binary coded config (ASC or SMC).
+ * \param length  The length in bytes of the conf buffer.
+ *
+ * \return        Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_OutOfBandConfig( const HANDLE_TRANSPORTDEC hTp,
+                                                 UCHAR              *conf,
+                                                 const UINT          length,
+                                                 const UINT          layer );
+
+/**
+ * \brief Open Transport medium for reading.
+ *
+ * \param transportDecFmt Format of the transport decoder medium to be accessed.
+ * \param flags           Transport decoder flags. Currently only TP_FLAG_MPEG4, which signals a
+ *                        MPEG4 capable decoder (relevant for ADTS only).
+ *
+ * \return   A pointer to a valid and allocated HANDLE_TRANSPORTDEC or a null pointer on failure.
+ */
+HANDLE_TRANSPORTDEC transportDec_Open( TRANSPORT_TYPE transportDecFmt,
+                                       const UINT flags );
+
+/**
+ * \brief                Register configuration change callback.
+ * \param hTp            Handle of transport decoder.
+ * \param cbUpdateConfig Pointer to a callback function to handle audio config changes.
+ * \param user_data      void pointer for user data passed to the callback as first parameter.
+ * \return               0 on success.
+ */
+int transportDec_RegisterAscCallback (
+        HANDLE_TRANSPORTDEC hTp,
+        const cbUpdateConfig_t cbUpdateConfig,
+        void* user_data );
+
+/**
+ * \brief                Register SSC parser callback.
+ * \param hTp            Handle of transport decoder.
+ * \param cbUpdateConfig Pointer to a callback function to handle SSC parsing.
+ * \param user_data      void pointer for user data passed to the callback as first parameter.
+ * \return               0 on success.
+ */
+int transportDec_RegisterSscCallback (
+        HANDLE_TRANSPORTDEC hTp,
+        const cbSsc_t cbSscParse,
+        void* user_data );
+
+/**
+ * \brief                Register SBR header parser callback.
+ * \param hTp            Handle of transport decoder.
+ * \param cbUpdateConfig Pointer to a callback function to handle SBR header parsing.
+ * \param user_data      void pointer for user data passed to the callback as first parameter.
+ * \return               0 on success. 
+ */
+int transportDec_RegisterSbrCallback( HANDLE_TRANSPORTDEC hTpDec, const cbSbr_t cbSbr, void* user_data);
+
+/**
+ * \brief Fill internal input buffer with bitstream data from the external input buffer.
+ *  The function only copies such data as long as the decoder-internal input buffer is not full.
+ *  So it grabs whatever it can from pBuffer and returns information (bytesValid) so that at a
+ *  subsequent call of %transportDec_FillData(), the right position in pBuffer can be determined to
+ *  grab the next data.
+ *
+ * \param hTp         Handle of transportDec.
+ * \param pBuffer     Pointer to external input buffer.
+ * \param bufferSize  Size of external input buffer. This argument is required because decoder-internally
+ *                    we need the information to calculate the offset to pBuffer, where the next
+ *                    available data is, which is then fed into the decoder-internal buffer (as much
+ *                    as possible). Our example framework implementation fills the buffer at pBuffer
+ *                    again, once it contains no available valid bytes anymore (meaning bytesValid equal 0).
+ * \param bytesValid  Number of bitstream bytes in the external bitstream buffer that have not yet been
+ *                    copied into the decoder's internal bitstream buffer by calling this function.
+ *                    The value is updated according to the amount of newly copied bytes.
+ * \param layer       The layer the bitstream belongs to.
+ * \return            Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_FillData(
+        const HANDLE_TRANSPORTDEC  hTp,
+        UCHAR                     *pBuffer,
+        const UINT                 bufferSize,
+        UINT                      *pBytesValid,
+        const INT                  layer );
+
+/**
+ * \brief      Get transportDec bitstream handle.
+ * \param hTp  Pointer to a transport decoder handle.
+ * \return     HANDLE_FDK_BITSTREAM bitstream handle.
+ */
+HANDLE_FDK_BITSTREAM transportDec_GetBitstream ( const HANDLE_TRANSPORTDEC hTp, const UINT layer );
+
+/**
+ * \brief      Get transport format.
+ * \param hTp  Pointer to a transport decoder handle.
+ * \return     The transport format.
+ */
+TRANSPORT_TYPE transportDec_GetFormat ( const HANDLE_TRANSPORTDEC hTp );
+
+/**
+ * \brief Get the current buffer fullness value.
+ *
+ * \param hTp     Handle of a transport decoder.
+ *
+ * \return        Buffer fullness
+ */
+INT transportDec_GetBufferFullness( const HANDLE_TRANSPORTDEC hTp );
+
+/**
+ * \brief       Close and deallocate transportDec.
+ * \param phTp  Pointer to a previously allocated transport decoder handle.
+ * \return      void
+ */
+void transportDec_Close ( HANDLE_TRANSPORTDEC *phTp );
+
+/**
+ * \brief         Read one access unit from the transportDec medium.
+ * \param hTp     Handle of transportDec.
+ * \param length  On return, this value is overwritten with the actual access unit length in bits.
+ *                Set to -1 if length is unknown.
+ * \return        Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_ReadAccessUnit ( const HANDLE_TRANSPORTDEC hTp, const UINT layer );
+
+/**
+ * \brief Get the remaining amount of bits of the current access unit. The result
+ *        can be below zero, meaning that too many bits have been read.
+ * \param hTp     Handle of transportDec.
+ * \return amount of remaining bits.
+ */
+INT transportDec_GetAuBitsRemaining( const HANDLE_TRANSPORTDEC hTp, const UINT layer );
+
+/**
+ * \brief Get the total amount of bits of the current access unit.
+ * \param hTp     Handle of transportDec.
+ * \return amount of total bits.
+ */
+INT transportDec_GetAuBitsTotal( const HANDLE_TRANSPORTDEC hTp, const UINT layer );
+
+/**
+ * \brief      This function is required to be called when the decoder has finished parsing
+ *             one Access Unit for bitstream housekeeping.
+ * \param hTp  Transport Handle.
+ * \return     Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_EndAccessUnit ( const HANDLE_TRANSPORTDEC hTp );
+
+/**
+ * \brief      Obtain the amount of missing access units if applicable in case of 
+ *             a bit stream synchronization error. Each time transportDec_ReadAccessUnit()
+ *             returns TRANSPORTDEC_SYNC_ERROR this function can be called to retrieve an estimate
+ *             of the amount of missing access units. This works only in case of constant average
+ *             bit rate (has to be known) and if the parameter TPDEC_PARAM_SET_BITRATE has been set
+ *             accordingly.
+ * \param hTp  Transport Handle.
+ * \param pNAccessUnits pointer to a memory location where the estimated lost frame count will be stored into.      
+ * \return     Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_GetMissingAccessUnitCount ( INT *pNAccessUnits, HANDLE_TRANSPORTDEC hTp );
+
+
+/**
+ * \brief        Set a given setting.
+ * \param hTp    Transport Handle.
+ * \param param  Identifier of the parameter to be changed.
+ * \param value  Value for the parameter to be changed.
+ * \return       Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_SetParam ( const HANDLE_TRANSPORTDEC hTp,
+                                           const TPDEC_PARAM         param,
+                                           const INT                 value );
+
+/**
+ * \brief        Get number of subframes (for LATM or ADTS)
+ * \param hTp    Transport Handle.
+ * \return       Number of ADTS/LATM subframes (return 1 for all other transport types).
+ */
+UINT transportDec_GetNrOfSubFrames(HANDLE_TRANSPORTDEC hTp);
+
+
+/**
+ * \brief       Get info structure of transport decoder library.
+ * \param info  A pointer to an allocated LIB_INFO struct.
+ * \return      Error code.
+ */
+TRANSPORTDEC_ERROR transportDec_GetLibInfo( LIB_INFO *info );
+
+/* ADTS CRC support */
+
+/**
+ * \brief        Set current bitstream position as start of a new data region.
+ * \param hTp    Transport handle.
+ * \param mBits  Size in bits of the data region. Set to 0 if it should not be of a fixed size.
+ * \return       Data region ID, which should be used when calling transportDec_CrcEndReg().
+ */
+int transportDec_CrcStartReg ( const HANDLE_TRANSPORTDEC hTp,
+                               const INT mBits );
+
+/**
+ * \brief        Set end of data region.
+ * \param hTp    Transport handle.
+ * \param reg    Data region ID, opbtained from transportDec_CrcStartReg().
+ * \return       void
+ */
+void transportDec_CrcEndReg ( const HANDLE_TRANSPORTDEC hTp,
+                              const INT reg );
+
+/**
+ * \brief      Calculate ADTS crc and check if it is correct. The ADTS checksum is held internally.
+ * \param hTp  Transport handle.
+ * \return     Return TRANSPORTDEC_OK if the CRC is ok, or error if CRC is not correct.
+ */
+TRANSPORTDEC_ERROR transportDec_CrcCheck ( const HANDLE_TRANSPORTDEC hTp );
+
+
+#endif /* #ifndef __TPDEC_LIB_H__ */