Encoder downsampled SBR

* AAC-Encoder

   - Introduce optional AACENC_SBR_RATIO encoder API parameter to configure
     dualrate or downsampled SBR explicitely. ELD makes use of downsampled SBR
     in default configuration.
     Modified file(s):
        documentation\aacEncoder.pdf
        libAACenc\include\aacenc_lib.h
        libAACenc\src\aacenc.h
        libAACenc\src\aacenc_lib.cpp

* SBR-Encoder

   - Implement downsampled SBR feature.
   - Revise sbr tuning parameter selection.
     Modified file(s):
        libSBRenc\include\sbr_encoder.h
        libSBRenc\src\bit_sbr.h
        libSBRenc\src\env_est.cpp
        libSBRenc\src\mh_det.cpp
        libSBRenc\src\nf_est.cpp
        libSBRenc\src\ps_main.cpp
        libSBRenc\src\sbr.h
        libSBRenc\src\sbr_def.h
        libSBRenc\src\sbr_encoder.cpp
        libSBRenc\src\sbr_rom.cpp
        libSBRenc\src\sbr_rom.h
        libSBRenc\src\sbrenc_freq_sca.cpp
        libSBRenc\src\sbrenc_freq_sca.h
        libSBRenc\src\ton_corr.cpp

Bug 9428126

Change-Id: I731720a10829272acaaf70b84525df00a09ff3d2

3 files changed, 154 insertions, 69 deletions

diff --git a/libAACenc/include/aacenc_lib.h b/libAACenc/include/aacenc_lib.h
index 649cfba..6002366 100644
--- a/libAACenc/include/aacenc_lib.h
+++ b/libAACenc/include/aacenc_lib.h
@@ -316,7 +316,8 @@ if the parameter was not set from extern. The bitrate depends on the number of e
 channels and sampling rate and is determined as follows.
 \code
 AAC-LC (AOT_AAC_LC): 1.5 bits per sample
-HE-AAC (AOT_SBR): 0.625 bits per sample
+HE-AAC (AOT_SBR): 0.625 bits per sample (dualrate sbr)
+HE-AAC (AOT_SBR): 1.125 bits per sample (downsampled sbr)
 HE-AAC v2 (AOT_PS): 0.5 bits per sample
 \endcode
 
@@ -416,8 +417,9 @@ determines the maximum allowed bitrate for AAC-LC. For HE-AAC and HE-AAC v2 a li
 look-up table is used.
 
 A good working point in terms of audio quality, sampling rate and bitrate, is at 1 to 1.5
-bits/audio sample for AAC-LC, 0.625 bits/audio sample for HE-AAC and 0.5 bits/audio sample
-for HE-AAC v2. For example for one channel with a sampling frequency of 48 kHz, the range from
+bits/audio sample for AAC-LC, 0.625 bits/audio sample for dualrate HE-AAC, 1.125 bits/audio sample
+for downsampled HE-AAC and 0.5 bits/audio sample for HE-AAC v2.
+For example for one channel with a sampling frequency of 48 kHz, the range from
 48 kbit/s to 72 kbit/s achieves reasonable audio quality for AAC-LC.
 
 For HE-AAC and HE-AAC v2 the lowest possible audio input sampling frequency is 16 kHz because then the
@@ -434,7 +436,7 @@ quality at that bitrate than HE-AAC or HE-AAC v2.
 The following table provides an overview of recommended encoder configuration parameters
 which we determined by virtue of numerous listening tests.
 
-\subsection reommendedConfigLC AAC-LC, HE-AAC, HE-AACv2.
+\subsection reommendedConfigLC AAC-LC, HE-AAC, HE-AACv2 in Dualrate SBR mode.
 \verbatim
 -----------------------------------------------------------------------------------
 Audio Object Type  |  Bit Rate Range  |            Supported  | Preferred  | No. of
@@ -457,8 +459,8 @@ AAC LC + SBR       |  64000 - 128000  |  32.00, 44.10, 48.00  |     48.00  |
 -------------------+------------------+-----------------------+------------+-------
 AAC LC + SBR       |  64000 -  69999  |  32.00, 44.10, 48.00  |     32.00  | 5, 5.1
 AAC LC + SBR       |  70000 - 159999  |  32.00, 44.10, 48.00  |     44.10  | 5, 5.1
-AAC LC + SBR       | 160000 - 319999  |  32.00, 44.10, 48.00  |     48.00  | 5, 5.1
-AAC LC + SBR       | 320000 - 640000  |  64.00, 88.20, 96.00  |     96.00  | 5, 5.1
+AAC LC + SBR       | 160000 - 245999  |  32.00, 44.10, 48.00  |     48.00  |      5
+AAC LC + SBR       | 160000 - 265999  |  32.00, 44.10, 48.00  |     48.00  |    5.1
 -------------------+------------------+-----------------------+------------+-------
 AAC LC             |   8000 -  15999  | 11.025, 12.00, 16.00  |     12.00  |      1
 AAC LC             |  16000 -  23999  |                16.00  |     16.00  |      1
@@ -481,7 +483,7 @@ AAC LC             | 280000 - 800000  |  32.00, 44.10, 48.00  |     44.10  | 5,
 -----------------------------------------------------------------------------------
 \endverbatim \n
 
-\subsection reommendedConfigLD AAC-LD, AAC-ELD, AAC-ELD with SBR.
+\subsection reommendedConfigLD AAC-LD, AAC-ELD, AAC-ELD with SBR in Dualrate SBR mode.
 \verbatim
 -----------------------------------------------------------------------------------
 Audio Object Type  |  Bit Rate Range  |            Supported  | Preferred  | No. of
@@ -489,18 +491,20 @@ Audio Object Type  |  Bit Rate Range  |            Supported  | Preferred  | No.
                    |                  |                [kHz]  |      Rate  |
                    |                  |                       |     [kHz]  |
 -------------------+------------------+-----------------------+------------+-------
-ELD + SBR          |  16000 -  24999  |        32.00 - 44.10  |     32.00  |      1
+ELD + SBR          |  18000 -  24999  |        32.00 - 44.10  |     32.00  |      1
 ELD + SBR          |  25000 -  31999  |        32.00 - 48.00  |     32.00  |      1
 ELD + SBR          |  32000 -  64000  |        32.00 - 48.00  |     48.00  |      1
 -------------------+------------------+-----------------------+------------+-------
 ELD + SBR          |  32000 -  51999  |        32.00 - 48.00  |     44.10  |      2
 ELD + SBR          |  52000 - 128000  |        32.00 - 48.00  |     48.00  |      2
 -------------------+------------------+-----------------------+------------+-------
-ELD + SBR          |  72000 - 192000  |        44.10 - 48.00  |     48.00  |      3
+ELD + SBR          |  72000 - 160000  |        44.10 - 48.00  |     48.00  |      3
 -------------------+------------------+-----------------------+------------+-------
-ELD + SBR          |  96000 - 256000  |        44.10 - 48.00  |     48.00  |      4
+ELD + SBR          |  96000 - 212000  |        44.10 - 48.00  |     48.00  |      4
 -------------------+------------------+-----------------------+------------+-------
-ELD + SBR          | 120000 - 320000  |        44.10 - 48.00  |     48.00  |      5
+ELD + SBR          | 120000 - 246000  |        44.10 - 48.00  |     48.00  |      5
+-------------------+------------------+-----------------------+------------+-------
+ELD + SBR          | 120000 - 266000  |        44.10 - 48.00  |     48.00  |    5.1
 -------------------+------------------+-----------------------+------------+-------
 LD, ELD            |  16000 -  19999  |        16.00 - 24.00  |     16.00  |      1
 LD, ELD            |  20000 -  39999  |        16.00 - 32.00  |     24.00  |      1
@@ -531,13 +535,33 @@ LD, ELD            | 340000 - 960000  |        44.10 - 48.00  |     48.00  |
 -----------------------------------------------------------------------------------
 \endverbatim \n
 
+\subsection reommendedConfigELD AAC-ELD with SBR in Downsampled SBR mode.
+\verbatim
+-----------------------------------------------------------------------------------
+Audio Object Type  |  Bit Rate Range  |            Supported  | Preferred  | No. of
+                   |         [bit/s]  |       Sampling Rates  |    Sampl.  |  Chan.
+                   |                  |                [kHz]  |      Rate  |
+                   |                  |                       |     [kHz]  |
+-------------------+------------------+-----------------------+------------+-------
+ELD + SBR          |  18000 -  24999  |        16.00 - 22.05  |     22.05  |      1
+(downsampled SBR)  |  25000 -  35999  |        22.05 - 32.00  |     24.00  |      1
+                   |  36000 -  64000  |        32.00 - 48.00  |     32.00  |      1
+-----------------------------------------------------------------------------------
+\endverbatim \n
+
+
 \page ENCODERBEHAVIOUR Encoder Behaviour
 
 \section BEHAVIOUR_BANDWIDTH Bandwidth
 
 The FDK AAC encoder usually does not use the full frequency range of the input signal, but restricts the bandwidth
 according to certain library-internal settings. They can be changed in the table "bandWidthTable" in the
-file bandwidth.cpp (if available), or via command-line argument "-w" (see chapter \ref CommandLineUsage).
+file bandwidth.cpp (if available).
+
+The encoder API provides the ::AACENC_BANDWIDTH parameter to adjust the bandwidth explicitly.
+\code
+aacEncoder_SetParam(hAacEncoder, AACENC_BANDWIDTH, value);
+\endcode
 
 However it is not recommended to change these settings, because they are based on numerious listening
 tests and careful tweaks to ensure the best overall encoding quality.
@@ -638,7 +662,6 @@ an MPEG-2 AOT is choosen since PNS is an MPEG-4 AAC feature.
 If SBR is activated, the encoder automatically deactivates PNS internally. If TNS is disabled but PNS is allowed,
 the encoder deactivates PNS calculation internally.
 
-
 */
 
 #ifndef _AAC_ENC_LIB_H_
@@ -875,6 +898,15 @@ typedef enum
                                                   - 0: MPEG channel ordering (e. g. 5.1: C, L, R, SL, SR, LFE). (default)
                                                   - 1: WAVE file format channel ordering (e. g. 5.1: L, R, C, LFE, SL, SR). */
 
+  AACENC_SBR_RATIO                = 0x0108,  /*!<  Controls activation of downsampled SBR. With downsampled SBR, the delay will be
+                                                   shorter. On the other hand, for achieving the same quality level, downsampled SBR
+                                                   needs more bits than dual-rate SBR.
+                                                   With downsampled SBR, the AAC encoder will work at the same sampling rate as the
+                                                   SBR encoder (single rate).
+                                                   Downsampled SBR is supported for AAC-ELD and HE-AACv1.
+                                                   - 1: Downsampled SBR (default for ELD).
+                                                   - 2: Dual-rate SBR   (default for HE-AAC). */
+
   AACENC_AFTERBURNER              = 0x0200,  /*!< This parameter controls the use of the afterburner feature.
                                                   The afterburner is a type of analysis by synthesis algorithm which increases the
                                                   audio quality but also the required processing power. It is recommended to always
diff --git a/libAACenc/src/aacenc.h b/libAACenc/src/aacenc.h
index c4e1ecb..f07bc17 100644
--- a/libAACenc/src/aacenc.h
+++ b/libAACenc/src/aacenc.h
@@ -204,6 +204,8 @@ struct AACENC_CONFIG {
   INT   maxBitsPerFrame;        /* maximum number of bits in AU */
   INT   bitreservoir;           /* size of bitreservoir */
 
+  UINT  sbrRatio;               /* sbr sampling rate ratio: dual- or single-rate */
+
   UCHAR useTns;                 /* flag: use temporal noise shaping */
   UCHAR usePns;                 /* flag: use perceptual noise substitution */
   UCHAR useIS;                  /* flag: use intensity coding */
diff --git a/libAACenc/src/aacenc_lib.cpp b/libAACenc/src/aacenc_lib.cpp
index 4d5984d..0db84e8 100644
--- a/libAACenc/src/aacenc_lib.cpp
+++ b/libAACenc/src/aacenc_lib.cpp
@@ -98,7 +98,7 @@ amm-info@iis.fraunhofer.de
 /* Encoder library info */
 #define AACENCODER_LIB_VL0 3
 #define AACENCODER_LIB_VL1 4
-#define AACENCODER_LIB_VL2 8
+#define AACENCODER_LIB_VL2 9
 #define AACENCODER_LIB_TITLE "AAC Encoder"
 #define AACENCODER_LIB_BUILD_DATE __DATE__
 #define AACENCODER_LIB_BUILD_TIME __TIME__
@@ -118,7 +118,7 @@ amm-info@iis.fraunhofer.de
 #define SBL(fl)            (fl/8)                 /*!< Short block length (hardcoded to 8 short blocks per long block) */
 #define BSLA(fl)           (4*SBL(fl)+SBL(fl)/2)  /*!< AAC block switching look-ahead */
 #define DELAY_AAC(fl)      (fl+BSLA(fl))          /*!< MDCT + blockswitching */
-#define DELAY_AACELD(fl)   ( (fl) + ((fl)/2)  )   /*!< ELD FB delay */
+#define DELAY_AACELD(fl)   ((fl)/2)               /*!< ELD FB delay (no framing delay included) */
 
 #define INPUTBUFFER_SIZE (1537+100+2048)
 
@@ -166,7 +166,8 @@ typedef struct {
 
     UCHAR             userMetaDataMode;      /*!< Meta data library configuration. */
 
-    UCHAR             userSbrEnabled;
+    UCHAR             userSbrEnabled;        /*!< Enable SBR for ELD. */
+    UINT              userSbrRatio;          /*!< SBR sampling rate ratio. Dual- or single-rate. */
 
 } USER_PARAM;
 
@@ -229,7 +230,7 @@ struct AACENCODER
 
    UINT                      encoder_modis;
 
-   /* Capabity flags */
+   /* Capability flags */
    UINT                      CAPF_tpEnc;
 
 } ;
@@ -255,6 +256,20 @@ static inline INT isSbrActive(const HANDLE_AACENC_CONFIG hAacConfig)
     return ( sbrUsed );
 }
 
+static inline INT isPsActive(const AUDIO_OBJECT_TYPE audioObjectType)
+{
+    INT psUsed = 0;
+
+    if ( (audioObjectType==AOT_PS)
+      || (audioObjectType==AOT_MP2_PS)
+      || (audioObjectType==AOT_DABPLUS_PS)
+      || (audioObjectType==AOT_DRM_MPEG_PS) )
+    {
+        psUsed = 1;
+    }
+
+    return ( psUsed );
+}
 /****************************************************************************
                                Allocate Encoder
 ****************************************************************************/
@@ -449,6 +464,14 @@ AAC_ENCODER_ERROR aacEncDefaultConfig(HANDLE_AACENC_CONFIG hAacConfig,
 
     config->userAncDataRate    = 0;
 
+    /* SBR rate is set to 0 here, which means it should be set automatically
+       in FDKaacEnc_AdjustEncSettings() if the user did not set a rate
+       expilicitely. */
+    config->userSbrRatio = 0;
+
+    /* SBR enable set to -1 means to inquire ELD audio configurator for reasonable configuration. */
+    config->userSbrEnabled     = -1;
+
     return AAC_ENC_OK;
 }
 
@@ -483,6 +506,7 @@ INT aacEncoder_LimitBitrate(
         INT bitRate,
         const INT nSubFrames,
         const INT sbrActive,
+        const INT sbrDownSampleRate,
         const AUDIO_OBJECT_TYPE aot
         )
 {
@@ -492,8 +516,7 @@ INT aacEncoder_LimitBitrate(
   FDKaacEnc_InitChannelMapping(channelMode, CH_ORDER_MPEG, &cm);
 
   if (sbrActive) {
-    /* Assume SBR rate ratio of 2:1 */
-    coreSamplingRate = samplingRate / 2;
+    coreSamplingRate = samplingRate >>  (sbrEncoder_IsSingleRatePossible(aot) ? (sbrDownSampleRate-1):1);
   } else {
     coreSamplingRate = samplingRate;
   }
@@ -669,19 +692,6 @@ AACENC_ERROR FDKaacEnc_AdjustEncSettings(HANDLE_AACENCODER hAacEncoder,
           break;
     }
 
-    /* We need the frame length to call aacEncoder_LimitBitrate() */
-    hAacConfig->bitRate = aacEncoder_LimitBitrate(
-              NULL,
-              hAacConfig->sampleRate,
-              hAacConfig->framelength,
-              hAacConfig->nChannels,
-              hAacConfig->channelMode,
-              config->userBitrate,
-              hAacConfig->nSubFrames,
-              isSbrActive(hAacConfig),
-              hAacConfig->audioObjectType
-              );
-
     switch ( hAacConfig->audioObjectType ) {
       case AOT_ER_AAC_LD:
       case AOT_ER_AAC_ELD:
@@ -699,24 +709,7 @@ AACENC_ERROR FDKaacEnc_AdjustEncSettings(HANDLE_AACENCODER hAacEncoder,
         break;
     }
 
-    if (hAacConfig->epConfig >= 0) {
-        hAacConfig->syntaxFlags |= AC_ER;
-         if (((INT)hAacConfig->channelMode < 1) || ((INT)hAacConfig->channelMode > 7)) {
-           return AACENC_INVALID_CONFIG;        /* Cannel config 0 not supported. */
-         }
-    }
-
-    if ( FDKaacEnc_DetermineEncoderMode(&hAacConfig->channelMode, hAacConfig->nChannels) != AAC_ENC_OK) {
-        return AACENC_INVALID_CONFIG;        /* nChannels doesn't match chMode, this is just a check-up */
-    }
-
-    if ( (hAacConfig->nChannels > hAacEncoder->nMaxAacChannels)
-      || ( (FDKaacEnc_GetChannelModeConfiguration(hAacConfig->channelMode)->nChannelsEff > hAacEncoder->nMaxSbrChannels) &&
-            isSbrActive(hAacConfig) )
-         )
-    {
-        return AACENC_INVALID_CONFIG;      /* not enough channels allocated */
-    }
+    hAacConfig->bitRate = config->userBitrate;
 
     /* get bitrate in VBR configuration */
     if ( (hAacConfig->bitrateMode>=1) && (hAacConfig->bitrateMode<=5) ) {
@@ -727,25 +720,52 @@ AACENC_ERROR FDKaacEnc_AdjustEncSettings(HANDLE_AACENCODER hAacEncoder,
 
 
     /* Set default bitrate if no external bitrate declared. */
-    if (hAacConfig->bitRate==-1) {
+    if ( (hAacConfig->bitrateMode==0) && (config->userBitrate==(UINT)-1) ) {
         INT bitrate = FDKaacEnc_GetChannelModeConfiguration(hAacConfig->channelMode)->nChannelsEff * hAacConfig->sampleRate;
-        switch (hAacConfig->audioObjectType)
+
+        if ( isPsActive(hAacConfig->audioObjectType) ) {
+          hAacConfig->bitRate = (bitrate>>1);                  /* 0.5 bit per sample */
+        }
+        else if ( isSbrActive(hAacConfig) )
+        {
+          if ( (config->userSbrRatio==2) || ((config->userSbrRatio==0)&&(hAacConfig->audioObjectType!=AOT_ER_AAC_ELD)) ) {
+            hAacConfig->bitRate = (bitrate + (bitrate>>2))>>1; /* 0.625 bits per sample */
+          }
+          if ( (config->userSbrRatio==1) || ((config->userSbrRatio==0)&&(hAacConfig->audioObjectType==AOT_ER_AAC_ELD)) ) {
+            hAacConfig->bitRate = (bitrate + (bitrate>>3));    /* 1.125 bits per sample */
+          }
+        } else
         {
-            case AOT_AAC_LC:
                 hAacConfig->bitRate = bitrate + (bitrate>>1);        /* 1.5 bits per sample */
-                break;
-            case AOT_SBR:
-                hAacConfig->bitRate = (bitrate + (bitrate>>2))>>1;   /* 0.625 bits per sample */
-                break;
-            case AOT_PS:
-                hAacConfig->bitRate = (bitrate>>1);                  /* 0.5 bit per sample */
-                break;
-            default:
-                hAacConfig->bitRate = bitrate;
-                break;
         }
     }
 
+    /* Initialize SBR parameters */
+    if ( (config->userSbrRatio==0) && (isSbrActive(hAacConfig)) ) {
+      /* Automatic SBR ratio configuration
+       * - downsampled SBR for ELD
+       * - otherwise always dualrate SBR
+       */
+        hAacConfig->sbrRatio = (hAacConfig->audioObjectType==AOT_ER_AAC_ELD) ? 1 : 2;
+    }
+    else {
+      /* SBR ratio has been set by the user, so use it. */
+      hAacConfig->sbrRatio = config->userSbrRatio;
+    }
+    /* We need the frame length to call aacEncoder_LimitBitrate() */
+    hAacConfig->bitRate = aacEncoder_LimitBitrate(
+              NULL,
+              hAacConfig->sampleRate,
+              hAacConfig->framelength,
+              hAacConfig->nChannels,
+              hAacConfig->channelMode,
+              hAacConfig->bitRate,
+              hAacConfig->nSubFrames,
+              isSbrActive(hAacConfig),
+              hAacConfig->sbrRatio,
+              hAacConfig->audioObjectType
+              );
+
     /* Configure PNS */
     if ( ((hAacConfig->bitrateMode>=1) && (hAacConfig->bitrateMode<=5)) /* VBR without PNS. */
         || (hAacConfig->useTns == 0) )                                  /* TNS required. */
@@ -753,6 +773,25 @@ AACENC_ERROR FDKaacEnc_AdjustEncSettings(HANDLE_AACENCODER hAacEncoder,
         hAacConfig->usePns = 0;
     }
 
+    if (hAacConfig->epConfig >= 0) {
+        hAacConfig->syntaxFlags |= AC_ER;
+         if (((INT)hAacConfig->channelMode < 1) || ((INT)hAacConfig->channelMode > 7)) {
+           return AACENC_INVALID_CONFIG;        /* Cannel config 0 not supported. */
+         }
+    }
+
+    if ( FDKaacEnc_DetermineEncoderMode(&hAacConfig->channelMode, hAacConfig->nChannels) != AAC_ENC_OK) {
+        return AACENC_INVALID_CONFIG;        /* nChannels doesn't match chMode, this is just a check-up */
+    }
+
+    if ( (hAacConfig->nChannels > hAacEncoder->nMaxAacChannels)
+      || ( (FDKaacEnc_GetChannelModeConfiguration(hAacConfig->channelMode)->nChannelsEff > hAacEncoder->nMaxSbrChannels) &&
+            isSbrActive(hAacConfig) )
+         )
+    {
+        return AACENC_INVALID_CONFIG;      /* not enough channels allocated */
+    }
+
     /* Meta data restriction. */
     switch (hAacConfig->audioObjectType)
     {
@@ -846,8 +885,6 @@ static AACENC_ERROR aacEncInit(HANDLE_AACENCODER  hAacEncoder,
         SBR_ELEMENT_INFO sbrElInfo[(6)];
         CHANNEL_MAPPING channelMapping;
 
-        AUDIO_OBJECT_TYPE aot = hAacConfig->audioObjectType;
-
         if ( FDKaacEnc_InitChannelMapping(hAacConfig->channelMode,
                                           hAacConfig->channelOrder,
                                          &channelMapping) != AAC_ENC_OK )
@@ -875,8 +912,9 @@ static AACENC_ERROR aacEncInit(HANDLE_AACENCODER  hAacEncoder,
                                 &aacBufferOffset,
                                 &hAacConfig->nChannels,
                                 &hAacConfig->sampleRate,
+                                &hAacConfig->sbrRatio,
                                 &frameLength,
-                                &hAacConfig->audioObjectType,
+                                 hAacConfig->audioObjectType,
                                 &hAacEncoder->nDelay,
                                  (hAacConfig->audioObjectType == AOT_ER_AAC_ELD) ? 1 : TRANS_FAC,
                                  (config->userTpHeaderPeriod!=0xFF) ? config->userTpHeaderPeriod : DEFAULT_HEADER_PERIOD_REPETITION_RATE,
@@ -884,7 +922,7 @@ static AACENC_ERROR aacEncInit(HANDLE_AACENCODER  hAacEncoder,
                                 );
 
         /* Suppress AOT reconfiguration and check error status. */
-        if ( sbrError || (hAacConfig->audioObjectType!=aot) ) {
+        if (sbrError) {
             return AACENC_INIT_SBR_ERROR;
         }
 
@@ -953,7 +991,7 @@ static AACENC_ERROR aacEncInit(HANDLE_AACENCODER  hAacEncoder,
         INT inputDataDelay = DELAY_AAC(hAacConfig->framelength);
 
         if ( isSbrActive(hAacConfig) && hSbrEncoder!=NULL) {
-            inputDataDelay = 2*inputDataDelay + sbrEncoder_GetInputDataDelay(*hSbrEncoder);
+          inputDataDelay = hAacConfig->sbrRatio*inputDataDelay + sbrEncoder_GetInputDataDelay(*hSbrEncoder);
         }
 
         if ( FDK_MetadataEnc_Init(hAacEncoder->hMetadataEnc,
@@ -1684,6 +1722,16 @@ AACENC_ERROR aacEncoder_SetParam(
           }
         }
         break;
+    case AACENC_SBR_RATIO:
+        if (settings->userSbrRatio != value) {
+            if (! ((value==0) || (value==1) || (value==2)) ) {
+              err = AACENC_INVALID_CONFIG;
+              break;
+            }
+            settings->userSbrRatio = value;
+            hAacEncoder->InitFlags |= AACENC_INIT_CONFIG | AACENC_INIT_STATES | AACENC_INIT_TRANSPORT;
+        }
+        break;
     case AACENC_SBR_MODE:
         if (settings->userSbrEnabled != value) {
             settings->userSbrEnabled = value;
@@ -1805,7 +1853,7 @@ UINT aacEncoder_GetParam(
         value = (UINT)hAacEncoder->aacConfig.bitrateMode;
         break;
     case AACENC_SAMPLERATE:
-        value = (UINT)settings->userSamplerate;
+        value = (UINT)hAacEncoder->coderConfig.extSamplingRate;
         break;
     case AACENC_CHANNELMODE:
         value = (UINT)hAacEncoder->aacConfig.channelMode;
@@ -1822,6 +1870,9 @@ UINT aacEncoder_GetParam(
     case AACENC_GRANULE_LENGTH:
         value = (UINT)hAacEncoder->aacConfig.framelength;
        break;
+    case AACENC_SBR_RATIO:
+        value = isSbrActive(&hAacEncoder->aacConfig) ? hAacEncoder->aacConfig.sbrRatio : 0;
+        break;
     case AACENC_SBR_MODE:
         value = (UINT) (hAacEncoder->aacConfig.syntaxFlags & AC_SBR_PRESENT) ? 1 : 0;
         break;