path: root/doc/advanced.mux

; This is an advanced configuration example for ODR-DabMux,
; that documents more options that the simple example.mux

; More information about the usage of the tools is available
; in the guide, which can be found on the
; www.opendigitalradio.org website.
;
; The format is called INFO format, and defined by boost property_tree:
; http://www.boost.org/doc/libs/1_41_0/doc/html/boost_propertytree/parsers.html#boost_propertytree.parsers.info_parser

; It consists of six mandatory sections, whose relative order in this
; file are of no importance.

; The general section defines global multiplex parameters.
general {
    ; the DAB Transmission mode (values 1-4 accepted)
    dabmode 1

    ; the number of ETI frames to generate (set to 0 to get an unlimited number)
    nbframes 10

    ; boolean fileds can accept either false or true as values:

    ; Enable logging to syslog
    syslog false

    ; Write the SCCA field useful for the Factum ETI analyser
    writescca false

    ; Enable timestamp definition necessary for SFN
    ; This also enables time encoding using the MNSC and in EDI.
    tist false

    ; On startup, the timestamp is initialised to system time. If you want
    ; to add an offset, uncomment the following line and give a number
    ; in seconds.
    ; tist_offset 0

    ; The management server is a simple TCP server that can present
    ; statistics data (buffers, overruns, underruns, etc)
    ; which can then be graphed a tool like Munin
    ; The doc/stats_dabmux_multi.py tool is a suitable
    ; plugin for that. The data fields are documented in doc/STATS.md
    ; If the port is zero, or the line commented, the server
    ; is not started.
    managementport 12720
}

remotecontrol {
    ; enable the telnet remote control server on the given port
    ; This server allows you to read and define parameters that
    ; some features export. It is only accessible from localhost.
    ; Set the port to 0 to disable the server
    telnetport 12721

    ; the remote control server makes use of the unique identifiers
    ; for the subchannels, services and components. Make sure you
    ; chose them so that you can identify them.
}

; Some ensemble parameters
ensemble {
    ; Example for Switzerland, with country id=4 and ECC=E1
    id 0x4fff ; you can also use decimal if you want
    ecc 0xe1 ; Extended Country Code

    local-time-offset auto  ; autmatically calculate from system local time
                            ; or
    ;local-time-offset 1    ; in hours, supports half-hour offsets

    international-table 1 ; See TS 101 756 clause 5.7
                          ; 1 corresponds to the PTy used in RDS
                          ; 2 corresponds to program types used in north america

    ; Enable FIG0/7, which specifies that the ensemble is compliant to EN 300 401 version 2.
    ; For more options see doc/advanced.mux
    reconfig-counter hash

    ; all labels are maximum 16 characters in length
    label "OpenDigitalRadio"
    ; The short label is built from the label by erasing letters, and cannot
    ; be longer than 8 characters. If omitted, it will be truncated from the
    ; label
    shortlabel "ODR"

    ; Announcement settings for FIG0/19.
    announcements {
        test_announcement {
            cluster 1
            flags {
                Traffic true
            }

            subchannel sub-fu
        }
    }
}

; Definition of DAB services
services {
    ; Each service has it's own unique identifier, that is
    ; used throughout the configuration file and for the RC.
    srv-fu {
        id 0x4daa
        label "Funk"
        shortlabel "Fu"

        ; Programme Type, according to the chosen international-table above.
        pty 0

        ; chose between static and dynamic PTy
        ; static means the PTy represents to overall genre of the programme.
        ; dynamic means the PTy follows the various items within a programme.
        ; Use the RC interface to modify at runtime.
        ; See EN 300 401 Clause 8.1.5
        pty-sd static

        language 0
        ; also supports id

        ; List of announcement switching flags signalled in FIG 0/18
        ; This lists all possible announcements. If one is left out, it is disabled.
        announcements {
            Alarm false
            Traffic true
            Travel false
            Warning false
            News false
            Weather false
            Event false
            Special false
            ProgrammeInfo false
            Sports false
            Finance false

            ; a comma separated list of clusters in which the service belongs to
            ; cluster id 255 is not specified here and is ignored (for FIG 0/18)
            clusters "1,2"
        }
    }
    srv-ri {
        ; If your ensemble contains a service from another country,
        ; specify its ECC here. Example is for Italy, country id=5, ECC=E0
        id 0x5dab
        ecc 0xe0
        label "rick"
    }
    srv-lu {
        id 0x4dac
        label "Lu"
        ; pty, language, shortlabel and id can be omitted, and will take default values
    }
}

; The subchannels are defined in the corresponding section.
; supported types are : audio, data, enhancedpacket,
;                       dabplus, packet
;
; Type 'packet' expects to receive data in the format described
; in EN 300 401 Clause 5.3.2.
;
; 'enhancedpacket' mode will calculate FEC for MSC packet mode
; as described in EN 300 401 Clause 5.3.5.
;
; 'data' will read from the source and write it unmodified into
; the MSC.
subchannels {
    sub-fu {
        type audio
        bitrate 128
        id 10

        ; type audio subchannels automatically use
        ; UEP, unless the bitrate is 8, 16, 24, 40 or 144kbit/s
        ; (EN 300 401 Clause 6.2.1)
        ; this can be overridden with the option protection-profile
        protection-profile EEP_A
        ; supported options: UEP (use only for type audio!)
        ;                    EEP_A (for all bitrates)
        ;                    EEP_B (bitrates multiple of 32kbit/s)

        ; Set the protection level, possible values depend
        ; on the protection profile:
        ; UEP profile: 1 to 5; EEP profiles: 1 to 4
        protection 4

        ; example file input
        inputproto file
        inputuri "funk.mp2"
        nonblock false
    }
    sub-lu {
        type dabplus
        bitrate 96
        id 3
        protection 3
        ; EXPERIMENTAL!
        ; Receive STI-D(LI) carried in STI(PI, X) inside RTP using UDP.
        ; This is intended to be compatible with AVT audio encoders.
        ; EXPERIMENTAL!
        inputproto sti
        inputuri "rtp://127.0.0.1:32010"
    }
    sub-ri {
        type dabplus
        bitrate 96
        id 1
        protection 1
        ; example file input
        ;inputuri "rick.dabp"

        ; example zmq input:
        ; Accepts connections to port 9000 from any interface.
        inputproto zmq
        inputuri "tcp://*:9000"

        ; ZMQ specific options, mandatory:

        ; Maximum size of input buffer, in AAC frames (24ms)
        ; when this buffer size is reached, some frames will be
        ; discarded to get the size again below this value.
        ; As the present implementation discards entire AAC superframes,
        ; (5 frames = 120ms) the effect will clearly be audible.
        zmq-buffer 40

        ; At startup or after an underrun, the buffer is filled to this
        ; amount of AAC frames before streaming starts.
        zmq-prebuffering 20

        ; In an ideal scenario, where the input rate exactly corresponds
        ; to the rate at which the frames are consumed by dabmux, you
        ; see the buffer level staying around the zmq-prebuffering value.
        ; Network latency jitter can make it temporarily go lower or higher.
        ; Encoder clock drift will make the buffer either slowly fill or
        ; empty, which will create intermittent glitches.


        ; the ZMQ inputs support encryption using the CURVE method.
        ; The multiplexer must have a public and a private key, which
        ; can be shared among several zmq inputs.
        ;
        ; each encoder also has a public and private key, and the
        ; encoder *public* key has to be known to the multiplexer.
        ; Using this system, the multiplexer can be sure that
        ; only the encoder possessing the right secret key can
        ; connect here. This inhibits third parties to hijack the
        ; input.

        ; by default, it is disabled, set encryption to 1 to enable
        encryption true

        ; the multiplexer key pair. Keep these secret.
        secret-key "keys/mux.sec"
        public-key "keys/mux.pub"

        ; The public key from the encoder. Only the encoder you want
        ; to accept must know the corresponding secret key.
        encoder-key "keys/encoder1.pub"

        ; key pairs can be generated using the zmqinput-keygen tool.
    }

    ; 'prbs' will generate a pseudorandom bit sequence according to
    ; ETS 300 799 Clause G.2.1. This is useful for testing purposes and
    ; measurement of bit error rate.
    sub-prbs {
       type data
       bitrate 16
       id 5
       protection 3

       ; Use the default PRBS polynomial.
       inputproto prbs
       inputuri "prbs://"

       ; To use another polynomial, set it in the url as hexadecimal
       ; The default polynomial is G(x) = x^20 + x^17 + 1, represented as
       ; (1 << 20) + (1 << 17) + (1 << 0) = 0x120001
       ;inputuri "prbs://:0x120001
   }

   ; An example using 'enhancedpacket' to send out epg data
   ; See http://wiki.opendigitalradio.org/How_to_configure_SPI_(Service_and_Programme_Information)_for_ODR-DabMux
    sub-data {
        id 6
        type enhancedpacket
        ; Settings this flag to true makes ODR-DabMux preload the entire file contents into memory
        ; This allows you to replace the file contents while the current file data still gets transmitted to the
        ; end.
        load_entire_file true
        inputfile "./epg.dat"
        protection 1
        bitrate 32
    }
}

; For now, each component links one service to one subchannel
components {
    ; the component unique identifiers are used for the RC.
    comp-fu {
        ; specifies audio -or- packet type, defaults to zero when not given
        ; audio: foreground=0, background=1, multi-channel=2
        ; data: unspecified=0, TMC=1, EWS=2, ITTS=3, paging=4, TDC=5, IP=59, MOT=60, proprietary=61
        type 0

        ; According to specification, you should not define component labels if
        ; the service is only used in one component. The service label is sufficient
        ; in that case.
        ;label "funk"
        ;shortlabel "fu"
        service srv-fu
        subchannel sub-fu

        ; FIG 0/13 user application was previously configured using the figtype setting, which
        ; allowed only a single user application.
        ; Now more than one user application can be defined per component, using the
        ; Using the 'user-applications' section, several can be defined per component.
        ; Do not use both figtype and user-applications.

        ; If both slideshow (TS 101 499) and SPI (TS 102 818) are carried in PAD, the following
        ; needs to be set for FIG 0/13 to be transmitted correctly.
        ; The same section is also applicable to packet services.
        user-applications {
            ; Add uaType 0x2 with X-PAD App Type = 12 and empty user application data
            userapp "slideshow"

            ; Add uaType 0x7 with X-PAD App Type = 16 and user application data = "Basic profile"
            userapp "spi"

            ; Broadcast website, add uaType 0x3 and user application data
            ; 0x01 "basic integrated receiver profile" and
            ; 0xFF "unrestricted profile"
            ; Only for packet-mode, not X-PAD.
            userapp "website"
        }

        ; Deprecated figtype setting:
        figtype 0x2
        ; defines the User Application Type according to TS 101 756 Table 16:
        ; 0x2   : MOT Slideshow
        ; 0x3   : MOT Broadcast Web Site
        ; 0x4   : TPEG
        ; 0x5   : DGPS
        ; 0x6   : TMC
        ; 0x7   : EPG
        ; 0x8   : DAB Java
        ; 0x44a : Journaline
        ; If not defined, the FIG 0/13 is not transmitted for this component

        ; for packet components, set the packet address (mandatory)
        ;address
        ; Whether to use data groups
        ;datagroup false
        ; (defaults to false)
        ; You should normally set 'datagroup true'
        ; if your packet mode subchannel is transferring an MOT application such
        ; as SPI/EPG or Slideshow.

        ; If you specify the user-application "spi", FIG0/13 will set the user application data to "basic profile"
    }

    ; If a service is used in more than one component, the primary component has to
    ; be placed above the secondary component(s) to ensure that the SCIdS field of FIG0/8
    ; is zero for the primary service component. (New in EN 300 401 V2.1.1)

    comp-lu {
        service srv-lu
        subchannel sub-lu
        user-applications {
            userapp "slideshow"
        }
    }

    comp-ri {
        service srv-ri
        subchannel sub-ri
        user-applications {
            userapp "slideshow"
        }
    }
}

outputs {
    ; The unique-id can be used by the remote control or the statistics server
    ; to identify the output

    ; Important! For real-time operation, you need to have exactly one
    ; output that applies back-pressure to ODR-DabMux, otherwise it will run
    ; at the highest possible rate on your system!
    ;
    ; For an output to a pipe, the data consumer at the other end of the pipe
    ; will dictate the multiplexing rate to ODR-DabMux.
    ;
    ; If you use the zmq or EDI outputs, you must also enable a simul:// output!

    ;supported output types for file and fifo outputs are
    ; raw, framed and streamed
    ;
    ; Please see doc/dab_output_formats.txt
    ;stdout "fifo:///dev/stdout?type=raw"

    ; Throttle output to real-time (one ETI frame every 24ms)
    throttle "simul://"

    edi {
        ; If TIST is enabled, requires leap-second information (see example.mux)
        destinations {
            ; The names you give to the destinations have no meaning,
            ; but have to be unique. You can give them meaningful names to help
            ; you identify the outputs.
            example_unicast {
                ; example for unicast EDI over UDP
                ; for unicast EDI, do not set source
                protocol udp
                sourceport  13000
                destination "192.168.23.23"
                port        12000

                ; For compatibility: if port is not specified in the destination itself,
                ; it is taken from the parent 'destinations' block.
            }
            example_multicast {
                ; example for multicast EDI, the source IP is required
                ; so that the data is sent on the correct ethernet interface
                protocol udp
                source      "192.168.0.50"
                sourceport  13000
                destination "232.20.10.1"
                port        12000
                ; The multicast TTL has to be adapted according to your network
                ttl 1

            }
            example_tcp {
                ; example for EDI TCP server. TCP is reliable, so it is counterproductive to
                ; use FEC. Using PFT also brings no benefit.
                protocol tcp
                listenport 13000

                ; For every connected endpoint, a queue is created. If the queue overflows, we
                ; assume the endpoint has a problem, and we close the connection. This sets
                ; the max queue size in number of frames. With PFT disabled, one frame is generated
                ; every 24ms. With PFT enabled, it depends on fragmentation and FEC settings.
                ;
                ; default value: 500 frames, without PFT: 12s worth of EDI data
                ;max_frames_queued 500
            }
        }

        ; The settings below apply to all destinations

        ; Enable the PFT subsystem. If false, AFPackets are sent.
        ; PFT is not necessary when using TCP.
        enable_pft  false

        ; How many lost fragments can be recovered by Reed-Solomon.
        ; Requires enable_pft true.
        ;
        ; If set to 0, the PFT subsystem will only do Fragmentation and
        ; Transport, but no Reed Solomon.
        ; See ETSI TS 102 821, Clause 7 "PFT Layer", Figure 10. ODR-DabMux
        ; supports "Fragmentation and Transportation" and "Reed-Solomon and
        ; Transportation".
        fec         2

        ; Spread and interleave fragments from several EDI frames so as to reduce the
        ; probability of errors when several UDP packets are lost in bursts.
        ; This comes at the cost of larger overall latency between multiplexing
        ; and modulation.
        ;
        ; Configure the packet spreader/interleaver through a percentage:
        ; 0% send all fragments at once,
        ; 100% spread over 24ms,
        ; >100% spread and interleave. Default 95%
        packet_spread 95

        ; Length of a RS chunk, can be overridden
        ;default=207
        ;chunk_len   207

        ; Save the packets sent over Ethernet to the file ./edi.debug
        dump        false

        ; show more debugging info
        verbose     false

        ; (optional) set the kind of alignment to use in TAG Packets
        ; 0: no padding
        ; 8: pad to eight bytes (default)
        ; above 8: insert *dmy TAG Item to pad to given size in bytes
        ;tagpacket_alignment 8
    }

    ; Other outputs:

    ; ZeroMQ output example, new configuration format. Several
    ; zeromq blocks can be added here.
    ; This output does not back-pressure the multiplexer.
    ;zeromq {
        ; Listen on all interfaces, on port 9100
        ;endpoint "tcp://*:9100"

        ; Transmit backward compatible metadata containing
        ; EDI time and UTC offset when TIST is enabled.
        ;
        ; If TIST is enabled, requires leap-second information (see example.mux)
        ;
        ; WARNING! requires ODR-DabMux to be compiled with
        ; cURL support, and this will enable leap second download
        ; as for the EDI output!
        ;allowmetadata true
    ;}

    ; Legacy format for ZeroMQ output example. See example.mux
    ; for newer format.
    ;zmq  "zmq+tcp://*:9100"

    ; Output ETI-over-TCP. This is like piping a RAW ETI NI data stream
    ; into a TCP socket, except that the output can handle simultaneous
    ; connections. Not suitable for SFN use because timestamps are incomplete.
    ; 0.0.0.0 means "listen on all interfaces"
    ; This output does not back-pressure the multiplexer.
    ;tcp "tcp://0.0.0.0:9200"

    ; UDP send to host:port, simple example for unicast
    ;net_udp "udp://host:port"
    ; example with source and TTL specification for multicast
    ;net_udp "udp://237.10.0.230:7000?src=10.0.1.125&ttl=1"

    ; RAW for farsync ETI card
    ;farsync "raw://sync0"
    ; the output also supports two parameters:
    ;  clocking=master and clocking=slave
    ;
    ; and extsyncclock which enables external clock sync. Its value is the
    ; external clock frequency in Hz.
    ; Example:
    ;farsync "raw://sync0?clocking=master&extsyncclock=10000000"
}