; This is an example configuration file that illustrates ; the structure of the configuration. ; It doesn't show all possible options. A more detailed example ; is available in doc/advanced.mux ; ; It contains two services, one DAB and one DAB+, and also shows ; both the file input useful for offline processing, and the ; EDI input useful in a 24/7 scenario. ; More information about the usage of the tools is available ; in the guide, which can be found on the ; www.opendigitalradio.org website. ; ; As you can see, comments are defined by semicolons. ; ; It consists of six mandatory sections, whose relative order in this ; file are of no importance. ; The general section defines global multiplex parameters. general { ; the DAB Transmission mode (values 1-4 accepted) dabmode 1 ; the number of ETI frames to generate (set to 0 to get an unlimited number) nbframes 10 ; boolean fields can accept either false or true as values: ; Set to true to enable logging to syslog syslog false ; Enable timestamp definition necessary for SFN ; This also enables time encoding using the MNSC. ; ; When TIST is enabled, and either EDI or a ZMQ output with metadata is used, ; ODR-DabMux will download leap-second information from the IETF website, ; and cache it locally in /var/tmp. It will refresh the data by itself ; before it expires. ; ; If it cannot load this information, ODR-DabMux cannot start up! ; ; If your system doesn't have access to internet, you have to take care ; to create the file before ODR-DabMux startup. Get it from ; http://www.ietf.org/timezones/data/leap-seconds.list ; and save it to ; /var/tmp/odr-dabmux-leap-seconds.cache ; Refresh the file before expiry otherwise ODR-DabMux will abort! ; ; Use the RC interface 'get clocktai expiry' command to check how long ; your file is still valid. tist false ; The URLs used to fetch the TAI bulletin can be overridden if needed. ; URLs are given as a pipe-separated list, and the default value is: ;tai_clock_bulletins "https://www.ietf.org/timezones/data/leap-seconds.list|https://raw.githubusercontent.com/eggert/tz/master/leap-seconds.list" ; ; You may also use a file:// URL if you take care of updating the file ; yourself and store it locally. ; The management server is a simple TCP server that can present ; statistics data (buffers, overruns, underruns, etc) ; which can then be graphed a tool like Munin ; The doc/stats_dabmux_multi.py tool is a suitable ; plugin for that. The data fields are documented in doc/STATS.md ; If the port is zero, or the line commented, the server ; is not started. managementport 12720 ; At startup, run the command and abort if is it not returning 0. ; This may be a script. Useful for checking if the NTP client on your ; system has had time to setup the clock. ;startupcheck "chronyc waitsync 10 0.01" ;startupcheck "ntp-wait -fv" } remotecontrol { ; enable the telnet remote control server on the given port ; This server allows you to read and define parameters that ; some features export. It is only accessible from localhost. ; Set the port to 0 to disable the server telnetport 12721 ; The remote control is also accessible through a ZMQ REQ/REP socket, ; and is useful for machine-triggered interactions. It supports the ; same commands as the telnet RC. ; The example code in doc/zmq_remote.py illustrates how to use this rc. ; To disable the zeromq endpoint, remove the zmqendpoint line. ; By specifying "lo" in the URL, we make the server only accessible ; from localhost. You can write tcp://*:12722 to make it accessible ; on all interfaces. zmqendpoint tcp://lo:12722 ; the remote control server makes use of the unique identifiers ; for the subchannels, services and components. Make sure you ; chose them so that you can identify them. } ; Some ensemble parameters ensemble { ; A unique 16-bit id is allocated to the ensemble and allows unambiguous ; identification of the ensemble when associated with the ensemble ECC. ; The id normally starts with the coutry id. (See ETSI TS 101 756) ; Example for Switzerland, with country id=4 and ECC=E1 id 0x4fff ; you can also use decimal if you want ecc 0xe1 ; Extended Country Code local-time-offset auto ; autmatically calculate from system local time ; or ;local-time-offset 1 ; in hours, supports half-hour offsets ; The presence of reconfig-counter enables FIG0/7, which specifies that ; the ensemble is compliant to EN 300 401 version 2. ; You can either set a number which will be used for the Count field in FIG0/7, ;reconfig-counter 23 ; or set reconfig-counter hash ; to let ODR-DabMux calculate a hash that depends on your multiplex configuration, ; ensuring that when you change the configuration, the FIG 0/7 Count also changes ; ; Leave the option commented-out if you do not wish to transmit FIG 0/7. ; If you want to run your machine in UTC time, but still take advantage of the ; automatic calculation of the local time offset, set the environment variable TZ ; to your timezone (e.g. TZ=Europe/Rome) before you launch ODR-DabMux ; FIG1 labels are given with the 'label' and 'shortlabel' keys. ; ; All labels are maximum 16 characters in length. ; Labels that are valid utf-8 will be converted to EBU Latin Character set ; as defined in ETSI TS 101 756, in Annex C. If it's not valid utf-8, the ; label is taken as-is, byte per byte. Characters that cannot be ; represented in EBU Latin will be replaced by a space character. label "OpenDigitalRadio" ; The short label is built from the label by erasing letters, and cannot ; be longer than 8 characters. If omitted, it will be truncated from the ; label shortlabel "ODR" ; The FIG2 label can be up to 16 characters long, and is in UTF-8. ;fig2_label "ÓpêñÐigıtålRadiō" ; FIG2 labels can either be sent with a character field (old spec) ; or with a text control (new draftETSI TS 103 176 v2.2.1). ; If unspecified, defaults to setting the text control with the values ; shown in the example below. ; ;fig2_label_character_flag "0xFF00" ; ;fig2_label_text_control { ; bidi false ; base_direction "LTR" ; contextual false ; combining false ;} } ; Definition of DAB services services { ; Each service has it's own unique identifier, that is ; used throughout the configuration file and for the RC. srv-fu { id 0x4daa label "Fünk" ; You can define a shortlabel and a fig2_label too. } srv-ri { ; If your ensemble contains a service from another country, ; specify its ECC here. Example is for Italy, country id=5, ECC=E0 id 0x5dab ecc 0xe0 label "Rick" } } subchannels { sub-fu { ; This is our DAB programme, using a file input type audio bitrate 128 id 10 protection 3 inputfile "funk.mp2" } sub-bla { type audio bitrate 96 id 1 protection 1 ; for audio and dabplus, EDI input is available. It supports TCP server and UDP inputproto edi ; Accepts connection to port 9001 from any interface inputuri "tcp://0.0.0.0:9001" ; Two buffer-management types are available: prebuffering and timestamped. ; prebuffering will accumulate a few frames before it starts streaming, and each ; time there is a buffer underrun (similar to how the ZMQ input works) ; ; timestamped takes into account the TIST inside EDI and inserts the encoded ; audio frame into the ETI frame with the same timestamp buffer-management prebuffering ; In an ideal scenario, where the input rate exactly corresponds ; to the rate at which the frames are consumed by dabmux, you ; see the buffer level staying around the prebuffering value. ; Network latency jitter can make it temporarily go lower or higher. ; Encoder clock drift will make the buffer either slowly fill or ; empty, which will create intermittent glitches. ; Maximum size of input buffer, in frames (24ms) ; when this buffer size is reached, some frames will be ; discarded to get the size again below this value. buffer 40 ; At startup or after an underrun, the buffer is filled to this ; amount of frames before streaming starts. prebuffering 20 } sub-ri { ; This is our DAB+ programme, using a ZeroMQ input type dabplus bitrate 96 id 1 protection 3 ; Accepts connections to port 9000 from any interface. ; Use ODR-AudioEnc as encoder, accepts only connection ; from the local machine. inputproto edi inputuri "tcp://127.0.0.1:9000" buffer-management timestamped ; When using timestamped, the prebuffering is without effect. ; The buffer setting however still dictates the maximum buffer size, to ; avoid runaway memory usage in case of issues. buffer 500 ; 500 * 24ms = 12 seconds ; Specify the additional delay in milliseconds to add to the TIST. Positive values ; mean the content will be inserted later. tist-delay 10 } } ; In our simple example, each component links one service to one subchannel components { ; the component unique identifiers are used for the RC. comp-fu { ; According to specification, you should not define component labels if ; the service is only used in one component. The service label is sufficient ; in that case. service srv-fu subchannel sub-fu } comp-ri { service srv-ri subchannel sub-ri ; If the programme contains slideshow, please also specify the user-application: user-applications { userapp "slideshow" } } } ; A list of outputs outputs { ; The unique-id can be used by the remote control or the statistics server ; to identify the output ; Output RAW ETI NI to standard output stdout "fifo:///dev/stdout?type=raw" edi { ; Example EDI-over-TCP output ; If TIST is enabled, requires leap-second information destinations { example_tcp { protocol tcp listenport 13000 } } } ; Throttle output to real-time (one ETI frame every 24ms) throttle "simul://" ; Important! For real-time operation, you need to have exactly one ; output that applies back-pressure to ODR-DabMux, otherwise it will run ; at the highest possible rate on your system! ; ; For an output to a pipe, the data consumer at the other end of the pipe ; will dictate the multiplexing rate to ODR-DabMux. ; ; If you use the EDI output, you must also enable a simul:// output! ; More options are given in doc/advanced.mux }